blob: 4429d5e8c5796e096250a333be672c4174d8db26 [file] [log] [blame]
Thomas Gleixnerc942fdd2019-05-27 08:55:06 +02001// SPDX-License-Identifier: GPL-2.0-or-later
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -03002/*
3 * Fitipower FC0012 tuner driver
4 *
5 * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -03006 */
7
8#include "fc0012.h"
9#include "fc0012-priv.h"
10
11static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
12{
13 u8 buf[2] = {reg, val};
14 struct i2c_msg msg = {
Antti Palosaari3a984772012-12-09 12:33:04 -030015 .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030016 };
17
18 if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
Antti Palosaari45626202012-12-09 13:42:25 -030019 dev_err(&priv->i2c->dev,
20 "%s: I2C write reg failed, reg: %02x, val: %02x\n",
21 KBUILD_MODNAME, reg, val);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030022 return -EREMOTEIO;
23 }
24 return 0;
25}
26
27static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
28{
29 struct i2c_msg msg[2] = {
Antti Palosaari3a984772012-12-09 12:33:04 -030030 { .addr = priv->cfg->i2c_address, .flags = 0,
31 .buf = &reg, .len = 1 },
32 { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
33 .buf = val, .len = 1 },
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030034 };
35
36 if (i2c_transfer(priv->i2c, msg, 2) != 2) {
Antti Palosaari45626202012-12-09 13:42:25 -030037 dev_err(&priv->i2c->dev,
38 "%s: I2C read reg failed, reg: %02x\n",
39 KBUILD_MODNAME, reg);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030040 return -EREMOTEIO;
41 }
42 return 0;
43}
44
Mauro Carvalho Chehabf2709c22016-11-18 20:30:51 -020045static void fc0012_release(struct dvb_frontend *fe)
46{
47 kfree(fe->tuner_priv);
48 fe->tuner_priv = NULL;
49}
50
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030051static int fc0012_init(struct dvb_frontend *fe)
52{
53 struct fc0012_priv *priv = fe->tuner_priv;
54 int i, ret = 0;
55 unsigned char reg[] = {
56 0x00, /* dummy reg. 0 */
57 0x05, /* reg. 0x01 */
58 0x10, /* reg. 0x02 */
59 0x00, /* reg. 0x03 */
60 0x00, /* reg. 0x04 */
61 0x0f, /* reg. 0x05: may also be 0x0a */
62 0x00, /* reg. 0x06: divider 2, VCO slow */
63 0x00, /* reg. 0x07: may also be 0x0f */
64 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
65 Loop Bw 1/8 */
66 0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
67 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
68 0x82, /* reg. 0x0b: Output Clock is same as clock frequency,
69 may also be 0x83 */
70 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
71 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
72 0x00, /* reg. 0x0e */
73 0x00, /* reg. 0x0f */
74 0x00, /* reg. 0x10: may also be 0x0d */
75 0x00, /* reg. 0x11 */
76 0x1f, /* reg. 0x12: Set to maximum gain */
77 0x08, /* reg. 0x13: Set to Middle Gain: 0x08,
78 Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
79 0x00, /* reg. 0x14 */
80 0x04, /* reg. 0x15: Enable LNA COMPS */
81 };
82
Antti Palosaari3a984772012-12-09 12:33:04 -030083 switch (priv->cfg->xtal_freq) {
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030084 case FC_XTAL_27_MHZ:
85 case FC_XTAL_28_8_MHZ:
86 reg[0x07] |= 0x20;
87 break;
88 case FC_XTAL_36_MHZ:
89 default:
90 break;
91 }
92
Antti Palosaari3a984772012-12-09 12:33:04 -030093 if (priv->cfg->dual_master)
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030094 reg[0x0c] |= 0x02;
95
Antti Palosaari71b1e822012-12-09 00:30:08 -030096 if (priv->cfg->loop_through)
97 reg[0x09] |= 0x01;
98
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -030099 if (fe->ops.i2c_gate_ctrl)
100 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
101
102 for (i = 1; i < sizeof(reg); i++) {
103 ret = fc0012_writereg(priv, i, reg[i]);
104 if (ret)
105 break;
106 }
107
108 if (fe->ops.i2c_gate_ctrl)
109 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
110
111 if (ret)
Antti Palosaari45626202012-12-09 13:42:25 -0300112 dev_err(&priv->i2c->dev, "%s: fc0012_writereg failed: %d\n",
113 KBUILD_MODNAME, ret);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300114
115 return ret;
116}
117
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300118static int fc0012_set_params(struct dvb_frontend *fe)
119{
120 struct fc0012_priv *priv = fe->tuner_priv;
121 int i, ret = 0;
122 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
123 u32 freq = p->frequency / 1000;
124 u32 delsys = p->delivery_system;
125 unsigned char reg[7], am, pm, multi, tmp;
126 unsigned long f_vco;
127 unsigned short xtal_freq_khz_2, xin, xdiv;
Peter Senna Tschudinf5ca8c22013-09-30 13:00:26 -0300128 bool vco_select = false;
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300129
130 if (fe->callback) {
131 ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
132 FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
133 if (ret)
134 goto exit;
135 }
136
Antti Palosaari3a984772012-12-09 12:33:04 -0300137 switch (priv->cfg->xtal_freq) {
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300138 case FC_XTAL_27_MHZ:
139 xtal_freq_khz_2 = 27000 / 2;
140 break;
141 case FC_XTAL_36_MHZ:
142 xtal_freq_khz_2 = 36000 / 2;
143 break;
144 case FC_XTAL_28_8_MHZ:
145 default:
146 xtal_freq_khz_2 = 28800 / 2;
147 break;
148 }
149
150 /* select frequency divider and the frequency of VCO */
151 if (freq < 37084) { /* freq * 96 < 3560000 */
152 multi = 96;
153 reg[5] = 0x82;
154 reg[6] = 0x00;
155 } else if (freq < 55625) { /* freq * 64 < 3560000 */
156 multi = 64;
157 reg[5] = 0x82;
158 reg[6] = 0x02;
159 } else if (freq < 74167) { /* freq * 48 < 3560000 */
160 multi = 48;
161 reg[5] = 0x42;
162 reg[6] = 0x00;
163 } else if (freq < 111250) { /* freq * 32 < 3560000 */
164 multi = 32;
165 reg[5] = 0x42;
166 reg[6] = 0x02;
167 } else if (freq < 148334) { /* freq * 24 < 3560000 */
168 multi = 24;
169 reg[5] = 0x22;
170 reg[6] = 0x00;
171 } else if (freq < 222500) { /* freq * 16 < 3560000 */
172 multi = 16;
173 reg[5] = 0x22;
174 reg[6] = 0x02;
175 } else if (freq < 296667) { /* freq * 12 < 3560000 */
176 multi = 12;
177 reg[5] = 0x12;
178 reg[6] = 0x00;
179 } else if (freq < 445000) { /* freq * 8 < 3560000 */
180 multi = 8;
181 reg[5] = 0x12;
182 reg[6] = 0x02;
183 } else if (freq < 593334) { /* freq * 6 < 3560000 */
184 multi = 6;
185 reg[5] = 0x0a;
186 reg[6] = 0x00;
187 } else {
188 multi = 4;
189 reg[5] = 0x0a;
190 reg[6] = 0x02;
191 }
192
193 f_vco = freq * multi;
194
195 if (f_vco >= 3060000) {
196 reg[6] |= 0x08;
197 vco_select = true;
198 }
199
200 if (freq >= 45000) {
201 /* From divided value (XDIV) determined the FA and FP value */
202 xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
203 if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
204 xdiv++;
205
206 pm = (unsigned char)(xdiv / 8);
207 am = (unsigned char)(xdiv - (8 * pm));
208
209 if (am < 2) {
210 reg[1] = am + 8;
211 reg[2] = pm - 1;
212 } else {
213 reg[1] = am;
214 reg[2] = pm;
215 }
216 } else {
217 /* fix for frequency less than 45 MHz */
218 reg[1] = 0x06;
219 reg[2] = 0x11;
220 }
221
222 /* fix clock out */
223 reg[6] |= 0x20;
224
225 /* From VCO frequency determines the XIN ( fractional part of Delta
226 Sigma PLL) and divided value (XDIV) */
227 xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
228 xin = (xin << 15) / xtal_freq_khz_2;
229 if (xin >= 16384)
230 xin += 32768;
231
232 reg[3] = xin >> 8; /* xin with 9 bit resolution */
233 reg[4] = xin & 0xff;
234
235 if (delsys == SYS_DVBT) {
236 reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
237 switch (p->bandwidth_hz) {
238 case 6000000:
239 reg[6] |= 0x80;
240 break;
241 case 7000000:
242 reg[6] |= 0x40;
243 break;
244 case 8000000:
245 default:
246 break;
247 }
248 } else {
Antti Palosaari45626202012-12-09 13:42:25 -0300249 dev_err(&priv->i2c->dev, "%s: modulation type not supported!\n",
250 KBUILD_MODNAME);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300251 return -EINVAL;
252 }
253
254 /* modified for Realtek demod */
255 reg[5] |= 0x07;
256
257 if (fe->ops.i2c_gate_ctrl)
258 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
259
260 for (i = 1; i <= 6; i++) {
261 ret = fc0012_writereg(priv, i, reg[i]);
262 if (ret)
263 goto exit;
264 }
265
266 /* VCO Calibration */
267 ret = fc0012_writereg(priv, 0x0e, 0x80);
268 if (!ret)
269 ret = fc0012_writereg(priv, 0x0e, 0x00);
270
271 /* VCO Re-Calibration if needed */
272 if (!ret)
273 ret = fc0012_writereg(priv, 0x0e, 0x00);
274
275 if (!ret) {
276 msleep(10);
277 ret = fc0012_readreg(priv, 0x0e, &tmp);
278 }
279 if (ret)
280 goto exit;
281
282 /* vco selection */
283 tmp &= 0x3f;
284
285 if (vco_select) {
286 if (tmp > 0x3c) {
287 reg[6] &= ~0x08;
288 ret = fc0012_writereg(priv, 0x06, reg[6]);
289 if (!ret)
290 ret = fc0012_writereg(priv, 0x0e, 0x80);
291 if (!ret)
292 ret = fc0012_writereg(priv, 0x0e, 0x00);
293 }
294 } else {
295 if (tmp < 0x02) {
296 reg[6] |= 0x08;
297 ret = fc0012_writereg(priv, 0x06, reg[6]);
298 if (!ret)
299 ret = fc0012_writereg(priv, 0x0e, 0x80);
300 if (!ret)
301 ret = fc0012_writereg(priv, 0x0e, 0x00);
302 }
303 }
304
305 priv->frequency = p->frequency;
306 priv->bandwidth = p->bandwidth_hz;
307
308exit:
309 if (fe->ops.i2c_gate_ctrl)
310 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
311 if (ret)
Antti Palosaari45626202012-12-09 13:42:25 -0300312 dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
313 KBUILD_MODNAME, __func__, ret);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300314 return ret;
315}
316
317static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
318{
319 struct fc0012_priv *priv = fe->tuner_priv;
320 *frequency = priv->frequency;
321 return 0;
322}
323
324static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
325{
Antti Palosaaric5dc3b92012-12-09 13:45:42 -0300326 *frequency = 0; /* Zero-IF */
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300327 return 0;
328}
329
330static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
331{
332 struct fc0012_priv *priv = fe->tuner_priv;
333 *bandwidth = priv->bandwidth;
334 return 0;
335}
336
Hans-Frieder Vogt4a14db72012-05-12 05:11:36 -0300337#define INPUT_ADC_LEVEL -8
338
339static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
340{
341 struct fc0012_priv *priv = fe->tuner_priv;
342 int ret;
343 unsigned char tmp;
344 int int_temp, lna_gain, int_lna, tot_agc_gain, power;
Colin Ian Kinge5c50e12017-07-11 05:43:49 -0400345 static const int fc0012_lna_gain_table[] = {
Hans-Frieder Vogt4a14db72012-05-12 05:11:36 -0300346 /* low gain */
347 -63, -58, -99, -73,
348 -63, -65, -54, -60,
349 /* middle gain */
350 71, 70, 68, 67,
351 65, 63, 61, 58,
352 /* high gain */
353 197, 191, 188, 186,
354 184, 182, 181, 179,
355 };
356
357 if (fe->ops.i2c_gate_ctrl)
358 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
359
360 ret = fc0012_writereg(priv, 0x12, 0x00);
361 if (ret)
362 goto err;
363
364 ret = fc0012_readreg(priv, 0x12, &tmp);
365 if (ret)
366 goto err;
367 int_temp = tmp;
368
369 ret = fc0012_readreg(priv, 0x13, &tmp);
370 if (ret)
371 goto err;
372 lna_gain = tmp & 0x1f;
373
374 if (fe->ops.i2c_gate_ctrl)
375 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
376
377 if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
378 int_lna = fc0012_lna_gain_table[lna_gain];
379 tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
380 (int_temp & 0x1f)) * 2;
381 power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
382
383 if (power >= 45)
384 *strength = 255; /* 100% */
385 else if (power < -95)
386 *strength = 0;
387 else
388 *strength = (power + 95) * 255 / 140;
389
390 *strength |= *strength << 8;
391 } else {
392 ret = -1;
393 }
394
395 goto exit;
396
397err:
398 if (fe->ops.i2c_gate_ctrl)
399 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
400exit:
401 if (ret)
Antti Palosaari45626202012-12-09 13:42:25 -0300402 dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
403 KBUILD_MODNAME, __func__, ret);
Hans-Frieder Vogt4a14db72012-05-12 05:11:36 -0300404 return ret;
405}
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300406
407static const struct dvb_tuner_ops fc0012_tuner_ops = {
408 .info = {
Mauro Carvalho Chehaba3f90c72018-07-05 18:59:35 -0400409 .name = "Fitipower FC0012",
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300410
Mauro Carvalho Chehaba3f90c72018-07-05 18:59:35 -0400411 .frequency_min_hz = 37 * MHz, /* estimate */
412 .frequency_max_hz = 862 * MHz, /* estimate */
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300413 },
414
Mauro Carvalho Chehabf2709c22016-11-18 20:30:51 -0200415 .release = fc0012_release,
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300416
417 .init = fc0012_init,
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300418
419 .set_params = fc0012_set_params,
420
421 .get_frequency = fc0012_get_frequency,
422 .get_if_frequency = fc0012_get_if_frequency,
423 .get_bandwidth = fc0012_get_bandwidth,
Hans-Frieder Vogt4a14db72012-05-12 05:11:36 -0300424
425 .get_rf_strength = fc0012_get_rf_strength,
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300426};
427
428struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
Antti Palosaariad3a7582012-12-08 23:27:49 -0300429 struct i2c_adapter *i2c, const struct fc0012_config *cfg)
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300430{
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300431 struct fc0012_priv *priv;
432 int ret;
433 u8 chip_id;
434
435 if (fe->ops.i2c_gate_ctrl)
436 fe->ops.i2c_gate_ctrl(fe, 1);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300437
438 priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300439 if (!priv) {
440 ret = -ENOMEM;
441 dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
442 goto err;
443 }
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300444
Antti Palosaari71b1e822012-12-09 00:30:08 -0300445 priv->cfg = cfg;
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300446 priv->i2c = i2c;
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300447
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300448 /* check if the tuner is there */
449 ret = fc0012_readreg(priv, 0x00, &chip_id);
450 if (ret < 0)
451 goto err;
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300452
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300453 dev_dbg(&i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id);
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300454
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300455 switch (chip_id) {
456 case 0xa1:
457 break;
458 default:
459 ret = -ENODEV;
460 goto err;
461 }
462
463 dev_info(&i2c->dev, "%s: Fitipower FC0012 successfully identified\n",
464 KBUILD_MODNAME);
465
466 if (priv->cfg->loop_through) {
467 ret = fc0012_writereg(priv, 0x09, 0x6f);
468 if (ret < 0)
469 goto err;
470 }
Antti Palosaari71b1e822012-12-09 00:30:08 -0300471
Antti Palosaari3b0d51a2012-12-09 11:46:40 -0300472 /*
473 * TODO: Clock out en or div?
474 * For dual tuner configuration clearing bit [0] is required.
475 */
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300476 if (priv->cfg->clock_out) {
477 ret = fc0012_writereg(priv, 0x0b, 0x82);
478 if (ret < 0)
479 goto err;
480 }
Antti Palosaari3b0d51a2012-12-09 11:46:40 -0300481
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300482 fe->tuner_priv = priv;
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300483 memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
484 sizeof(struct dvb_tuner_ops));
485
Antti Palosaari44ff69c2012-12-09 13:28:45 -0300486err:
487 if (fe->ops.i2c_gate_ctrl)
488 fe->ops.i2c_gate_ctrl(fe, 0);
489
490 if (ret) {
491 dev_dbg(&i2c->dev, "%s: failed: %d\n", __func__, ret);
492 kfree(priv);
493 return NULL;
494 }
495
Hans-Frieder Vogtef89ec72012-05-06 16:56:55 -0300496 return fe;
497}
498EXPORT_SYMBOL(fc0012_attach);
499
500MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
501MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
502MODULE_LICENSE("GPL");
Hans-Frieder Vogt4a14db72012-05-12 05:11:36 -0300503MODULE_VERSION("0.6");