Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1 | /* |
| 2 | * adv7604 - Analog Devices ADV7604 video decoder driver |
| 3 | * |
| 4 | * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| 5 | * |
| 6 | * This program is free software; you may redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; version 2 of the License. |
| 9 | * |
| 10 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 11 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 12 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 13 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| 14 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| 15 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| 16 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| 17 | * SOFTWARE. |
| 18 | * |
| 19 | */ |
| 20 | |
| 21 | /* |
| 22 | * References (c = chapter, p = page): |
| 23 | * REF_01 - Analog devices, ADV7604, Register Settings Recommendations, |
| 24 | * Revision 2.5, June 2010 |
| 25 | * REF_02 - Analog devices, Register map documentation, Documentation of |
| 26 | * the register maps, Software manual, Rev. F, June 2010 |
| 27 | * REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010 |
| 28 | */ |
| 29 | |
| 30 | |
| 31 | #include <linux/kernel.h> |
| 32 | #include <linux/module.h> |
| 33 | #include <linux/slab.h> |
| 34 | #include <linux/i2c.h> |
| 35 | #include <linux/delay.h> |
| 36 | #include <linux/videodev2.h> |
| 37 | #include <linux/workqueue.h> |
| 38 | #include <linux/v4l2-dv-timings.h> |
| 39 | #include <media/v4l2-device.h> |
| 40 | #include <media/v4l2-ctrls.h> |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 41 | #include <media/adv7604.h> |
| 42 | |
| 43 | static int debug; |
| 44 | module_param(debug, int, 0644); |
| 45 | MODULE_PARM_DESC(debug, "debug level (0-2)"); |
| 46 | |
| 47 | MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver"); |
| 48 | MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); |
| 49 | MODULE_AUTHOR("Mats Randgaard <mats.randgaard@cisco.com>"); |
| 50 | MODULE_LICENSE("GPL"); |
| 51 | |
| 52 | /* ADV7604 system clock frequency */ |
| 53 | #define ADV7604_fsc (28636360) |
| 54 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 55 | #define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI) |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 56 | |
| 57 | /* |
| 58 | ********************************************************************** |
| 59 | * |
| 60 | * Arrays with configuration parameters for the ADV7604 |
| 61 | * |
| 62 | ********************************************************************** |
| 63 | */ |
| 64 | struct adv7604_state { |
| 65 | struct adv7604_platform_data pdata; |
| 66 | struct v4l2_subdev sd; |
| 67 | struct media_pad pad; |
| 68 | struct v4l2_ctrl_handler hdl; |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 69 | enum adv7604_mode mode; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 70 | struct v4l2_dv_timings timings; |
| 71 | u8 edid[256]; |
| 72 | unsigned edid_blocks; |
| 73 | struct v4l2_fract aspect_ratio; |
| 74 | u32 rgb_quantization_range; |
| 75 | struct workqueue_struct *work_queues; |
| 76 | struct delayed_work delayed_work_enable_hotplug; |
| 77 | bool connector_hdmi; |
Hans Verkuil | cf9afb1 | 2012-10-16 10:12:55 -0300 | [diff] [blame] | 78 | bool restart_stdi_once; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 79 | |
| 80 | /* i2c clients */ |
| 81 | struct i2c_client *i2c_avlink; |
| 82 | struct i2c_client *i2c_cec; |
| 83 | struct i2c_client *i2c_infoframe; |
| 84 | struct i2c_client *i2c_esdp; |
| 85 | struct i2c_client *i2c_dpp; |
| 86 | struct i2c_client *i2c_afe; |
| 87 | struct i2c_client *i2c_repeater; |
| 88 | struct i2c_client *i2c_edid; |
| 89 | struct i2c_client *i2c_hdmi; |
| 90 | struct i2c_client *i2c_test; |
| 91 | struct i2c_client *i2c_cp; |
| 92 | struct i2c_client *i2c_vdp; |
| 93 | |
| 94 | /* controls */ |
| 95 | struct v4l2_ctrl *detect_tx_5v_ctrl; |
| 96 | struct v4l2_ctrl *analog_sampling_phase_ctrl; |
| 97 | struct v4l2_ctrl *free_run_color_manual_ctrl; |
| 98 | struct v4l2_ctrl *free_run_color_ctrl; |
| 99 | struct v4l2_ctrl *rgb_quantization_range_ctrl; |
| 100 | }; |
| 101 | |
| 102 | /* Supported CEA and DMT timings */ |
| 103 | static const struct v4l2_dv_timings adv7604_timings[] = { |
| 104 | V4L2_DV_BT_CEA_720X480P59_94, |
| 105 | V4L2_DV_BT_CEA_720X576P50, |
| 106 | V4L2_DV_BT_CEA_1280X720P24, |
| 107 | V4L2_DV_BT_CEA_1280X720P25, |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 108 | V4L2_DV_BT_CEA_1280X720P50, |
| 109 | V4L2_DV_BT_CEA_1280X720P60, |
| 110 | V4L2_DV_BT_CEA_1920X1080P24, |
| 111 | V4L2_DV_BT_CEA_1920X1080P25, |
| 112 | V4L2_DV_BT_CEA_1920X1080P30, |
| 113 | V4L2_DV_BT_CEA_1920X1080P50, |
| 114 | V4L2_DV_BT_CEA_1920X1080P60, |
| 115 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 116 | /* sorted by DMT ID */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 117 | V4L2_DV_BT_DMT_640X350P85, |
| 118 | V4L2_DV_BT_DMT_640X400P85, |
| 119 | V4L2_DV_BT_DMT_720X400P85, |
| 120 | V4L2_DV_BT_DMT_640X480P60, |
| 121 | V4L2_DV_BT_DMT_640X480P72, |
| 122 | V4L2_DV_BT_DMT_640X480P75, |
| 123 | V4L2_DV_BT_DMT_640X480P85, |
| 124 | V4L2_DV_BT_DMT_800X600P56, |
| 125 | V4L2_DV_BT_DMT_800X600P60, |
| 126 | V4L2_DV_BT_DMT_800X600P72, |
| 127 | V4L2_DV_BT_DMT_800X600P75, |
| 128 | V4L2_DV_BT_DMT_800X600P85, |
| 129 | V4L2_DV_BT_DMT_848X480P60, |
| 130 | V4L2_DV_BT_DMT_1024X768P60, |
| 131 | V4L2_DV_BT_DMT_1024X768P70, |
| 132 | V4L2_DV_BT_DMT_1024X768P75, |
| 133 | V4L2_DV_BT_DMT_1024X768P85, |
| 134 | V4L2_DV_BT_DMT_1152X864P75, |
| 135 | V4L2_DV_BT_DMT_1280X768P60_RB, |
| 136 | V4L2_DV_BT_DMT_1280X768P60, |
| 137 | V4L2_DV_BT_DMT_1280X768P75, |
| 138 | V4L2_DV_BT_DMT_1280X768P85, |
| 139 | V4L2_DV_BT_DMT_1280X800P60_RB, |
| 140 | V4L2_DV_BT_DMT_1280X800P60, |
| 141 | V4L2_DV_BT_DMT_1280X800P75, |
| 142 | V4L2_DV_BT_DMT_1280X800P85, |
| 143 | V4L2_DV_BT_DMT_1280X960P60, |
| 144 | V4L2_DV_BT_DMT_1280X960P85, |
| 145 | V4L2_DV_BT_DMT_1280X1024P60, |
| 146 | V4L2_DV_BT_DMT_1280X1024P75, |
| 147 | V4L2_DV_BT_DMT_1280X1024P85, |
| 148 | V4L2_DV_BT_DMT_1360X768P60, |
| 149 | V4L2_DV_BT_DMT_1400X1050P60_RB, |
| 150 | V4L2_DV_BT_DMT_1400X1050P60, |
| 151 | V4L2_DV_BT_DMT_1400X1050P75, |
| 152 | V4L2_DV_BT_DMT_1400X1050P85, |
| 153 | V4L2_DV_BT_DMT_1440X900P60_RB, |
| 154 | V4L2_DV_BT_DMT_1440X900P60, |
| 155 | V4L2_DV_BT_DMT_1600X1200P60, |
| 156 | V4L2_DV_BT_DMT_1680X1050P60_RB, |
| 157 | V4L2_DV_BT_DMT_1680X1050P60, |
| 158 | V4L2_DV_BT_DMT_1792X1344P60, |
| 159 | V4L2_DV_BT_DMT_1856X1392P60, |
| 160 | V4L2_DV_BT_DMT_1920X1200P60_RB, |
| 161 | V4L2_DV_BT_DMT_1366X768P60, |
| 162 | V4L2_DV_BT_DMT_1920X1080P60, |
| 163 | { }, |
| 164 | }; |
| 165 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 166 | struct adv7604_video_standards { |
| 167 | struct v4l2_dv_timings timings; |
| 168 | u8 vid_std; |
| 169 | u8 v_freq; |
| 170 | }; |
| 171 | |
| 172 | /* sorted by number of lines */ |
| 173 | static const struct adv7604_video_standards adv7604_prim_mode_comp[] = { |
| 174 | /* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */ |
| 175 | { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, |
| 176 | { V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 }, |
| 177 | { V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 }, |
| 178 | { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, |
| 179 | { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, |
| 180 | { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, |
| 181 | { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, |
| 182 | { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, |
| 183 | /* TODO add 1920x1080P60_RB (CVT timing) */ |
| 184 | { }, |
| 185 | }; |
| 186 | |
| 187 | /* sorted by number of lines */ |
| 188 | static const struct adv7604_video_standards adv7604_prim_mode_gr[] = { |
| 189 | { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, |
| 190 | { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, |
| 191 | { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, |
| 192 | { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, |
| 193 | { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, |
| 194 | { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, |
| 195 | { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, |
| 196 | { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, |
| 197 | { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, |
| 198 | { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, |
| 199 | { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, |
| 200 | { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, |
| 201 | { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, |
| 202 | { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, |
| 203 | { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, |
| 204 | { V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 }, |
| 205 | { V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 }, |
| 206 | { V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 }, |
| 207 | { V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 }, |
| 208 | { V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */ |
| 209 | /* TODO add 1600X1200P60_RB (not a DMT timing) */ |
| 210 | { V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 }, |
| 211 | { V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */ |
| 212 | { }, |
| 213 | }; |
| 214 | |
| 215 | /* sorted by number of lines */ |
| 216 | static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = { |
| 217 | { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, |
| 218 | { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, |
| 219 | { V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 }, |
| 220 | { V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 }, |
| 221 | { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, |
| 222 | { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, |
| 223 | { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, |
| 224 | { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, |
| 225 | { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, |
| 226 | { }, |
| 227 | }; |
| 228 | |
| 229 | /* sorted by number of lines */ |
| 230 | static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = { |
| 231 | { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, |
| 232 | { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, |
| 233 | { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, |
| 234 | { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, |
| 235 | { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, |
| 236 | { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, |
| 237 | { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, |
| 238 | { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, |
| 239 | { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, |
| 240 | { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, |
| 241 | { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, |
| 242 | { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, |
| 243 | { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, |
| 244 | { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, |
| 245 | { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, |
| 246 | { }, |
| 247 | }; |
| 248 | |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 249 | /* ----------------------------------------------------------------------- */ |
| 250 | |
| 251 | static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) |
| 252 | { |
| 253 | return container_of(sd, struct adv7604_state, sd); |
| 254 | } |
| 255 | |
| 256 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| 257 | { |
| 258 | return &container_of(ctrl->handler, struct adv7604_state, hdl)->sd; |
| 259 | } |
| 260 | |
| 261 | static inline unsigned hblanking(const struct v4l2_bt_timings *t) |
| 262 | { |
| 263 | return t->hfrontporch + t->hsync + t->hbackporch; |
| 264 | } |
| 265 | |
| 266 | static inline unsigned htotal(const struct v4l2_bt_timings *t) |
| 267 | { |
| 268 | return t->width + t->hfrontporch + t->hsync + t->hbackporch; |
| 269 | } |
| 270 | |
| 271 | static inline unsigned vblanking(const struct v4l2_bt_timings *t) |
| 272 | { |
| 273 | return t->vfrontporch + t->vsync + t->vbackporch; |
| 274 | } |
| 275 | |
| 276 | static inline unsigned vtotal(const struct v4l2_bt_timings *t) |
| 277 | { |
| 278 | return t->height + t->vfrontporch + t->vsync + t->vbackporch; |
| 279 | } |
| 280 | |
| 281 | /* ----------------------------------------------------------------------- */ |
| 282 | |
| 283 | static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, |
| 284 | u8 command, bool check) |
| 285 | { |
| 286 | union i2c_smbus_data data; |
| 287 | |
| 288 | if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| 289 | I2C_SMBUS_READ, command, |
| 290 | I2C_SMBUS_BYTE_DATA, &data)) |
| 291 | return data.byte; |
| 292 | if (check) |
| 293 | v4l_err(client, "error reading %02x, %02x\n", |
| 294 | client->addr, command); |
| 295 | return -EIO; |
| 296 | } |
| 297 | |
| 298 | static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) |
| 299 | { |
| 300 | return adv_smbus_read_byte_data_check(client, command, true); |
| 301 | } |
| 302 | |
| 303 | static s32 adv_smbus_write_byte_data(struct i2c_client *client, |
| 304 | u8 command, u8 value) |
| 305 | { |
| 306 | union i2c_smbus_data data; |
| 307 | int err; |
| 308 | int i; |
| 309 | |
| 310 | data.byte = value; |
| 311 | for (i = 0; i < 3; i++) { |
| 312 | err = i2c_smbus_xfer(client->adapter, client->addr, |
| 313 | client->flags, |
| 314 | I2C_SMBUS_WRITE, command, |
| 315 | I2C_SMBUS_BYTE_DATA, &data); |
| 316 | if (!err) |
| 317 | break; |
| 318 | } |
| 319 | if (err < 0) |
| 320 | v4l_err(client, "error writing %02x, %02x, %02x\n", |
| 321 | client->addr, command, value); |
| 322 | return err; |
| 323 | } |
| 324 | |
| 325 | static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, |
| 326 | u8 command, unsigned length, const u8 *values) |
| 327 | { |
| 328 | union i2c_smbus_data data; |
| 329 | |
| 330 | if (length > I2C_SMBUS_BLOCK_MAX) |
| 331 | length = I2C_SMBUS_BLOCK_MAX; |
| 332 | data.block[0] = length; |
| 333 | memcpy(data.block + 1, values, length); |
| 334 | return i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| 335 | I2C_SMBUS_WRITE, command, |
| 336 | I2C_SMBUS_I2C_BLOCK_DATA, &data); |
| 337 | } |
| 338 | |
| 339 | /* ----------------------------------------------------------------------- */ |
| 340 | |
| 341 | static inline int io_read(struct v4l2_subdev *sd, u8 reg) |
| 342 | { |
| 343 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 344 | |
| 345 | return adv_smbus_read_byte_data(client, reg); |
| 346 | } |
| 347 | |
| 348 | static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 349 | { |
| 350 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 351 | |
| 352 | return adv_smbus_write_byte_data(client, reg, val); |
| 353 | } |
| 354 | |
| 355 | static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| 356 | { |
| 357 | return io_write(sd, reg, (io_read(sd, reg) & mask) | val); |
| 358 | } |
| 359 | |
| 360 | static inline int avlink_read(struct v4l2_subdev *sd, u8 reg) |
| 361 | { |
| 362 | struct adv7604_state *state = to_state(sd); |
| 363 | |
| 364 | return adv_smbus_read_byte_data(state->i2c_avlink, reg); |
| 365 | } |
| 366 | |
| 367 | static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 368 | { |
| 369 | struct adv7604_state *state = to_state(sd); |
| 370 | |
| 371 | return adv_smbus_write_byte_data(state->i2c_avlink, reg, val); |
| 372 | } |
| 373 | |
| 374 | static inline int cec_read(struct v4l2_subdev *sd, u8 reg) |
| 375 | { |
| 376 | struct adv7604_state *state = to_state(sd); |
| 377 | |
| 378 | return adv_smbus_read_byte_data(state->i2c_cec, reg); |
| 379 | } |
| 380 | |
| 381 | static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 382 | { |
| 383 | struct adv7604_state *state = to_state(sd); |
| 384 | |
| 385 | return adv_smbus_write_byte_data(state->i2c_cec, reg, val); |
| 386 | } |
| 387 | |
| 388 | static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| 389 | { |
| 390 | return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); |
| 391 | } |
| 392 | |
| 393 | static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg) |
| 394 | { |
| 395 | struct adv7604_state *state = to_state(sd); |
| 396 | |
| 397 | return adv_smbus_read_byte_data(state->i2c_infoframe, reg); |
| 398 | } |
| 399 | |
| 400 | static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 401 | { |
| 402 | struct adv7604_state *state = to_state(sd); |
| 403 | |
| 404 | return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val); |
| 405 | } |
| 406 | |
| 407 | static inline int esdp_read(struct v4l2_subdev *sd, u8 reg) |
| 408 | { |
| 409 | struct adv7604_state *state = to_state(sd); |
| 410 | |
| 411 | return adv_smbus_read_byte_data(state->i2c_esdp, reg); |
| 412 | } |
| 413 | |
| 414 | static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 415 | { |
| 416 | struct adv7604_state *state = to_state(sd); |
| 417 | |
| 418 | return adv_smbus_write_byte_data(state->i2c_esdp, reg, val); |
| 419 | } |
| 420 | |
| 421 | static inline int dpp_read(struct v4l2_subdev *sd, u8 reg) |
| 422 | { |
| 423 | struct adv7604_state *state = to_state(sd); |
| 424 | |
| 425 | return adv_smbus_read_byte_data(state->i2c_dpp, reg); |
| 426 | } |
| 427 | |
| 428 | static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 429 | { |
| 430 | struct adv7604_state *state = to_state(sd); |
| 431 | |
| 432 | return adv_smbus_write_byte_data(state->i2c_dpp, reg, val); |
| 433 | } |
| 434 | |
| 435 | static inline int afe_read(struct v4l2_subdev *sd, u8 reg) |
| 436 | { |
| 437 | struct adv7604_state *state = to_state(sd); |
| 438 | |
| 439 | return adv_smbus_read_byte_data(state->i2c_afe, reg); |
| 440 | } |
| 441 | |
| 442 | static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 443 | { |
| 444 | struct adv7604_state *state = to_state(sd); |
| 445 | |
| 446 | return adv_smbus_write_byte_data(state->i2c_afe, reg, val); |
| 447 | } |
| 448 | |
| 449 | static inline int rep_read(struct v4l2_subdev *sd, u8 reg) |
| 450 | { |
| 451 | struct adv7604_state *state = to_state(sd); |
| 452 | |
| 453 | return adv_smbus_read_byte_data(state->i2c_repeater, reg); |
| 454 | } |
| 455 | |
| 456 | static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 457 | { |
| 458 | struct adv7604_state *state = to_state(sd); |
| 459 | |
| 460 | return adv_smbus_write_byte_data(state->i2c_repeater, reg, val); |
| 461 | } |
| 462 | |
| 463 | static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| 464 | { |
| 465 | return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val); |
| 466 | } |
| 467 | |
| 468 | static inline int edid_read(struct v4l2_subdev *sd, u8 reg) |
| 469 | { |
| 470 | struct adv7604_state *state = to_state(sd); |
| 471 | |
| 472 | return adv_smbus_read_byte_data(state->i2c_edid, reg); |
| 473 | } |
| 474 | |
| 475 | static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 476 | { |
| 477 | struct adv7604_state *state = to_state(sd); |
| 478 | |
| 479 | return adv_smbus_write_byte_data(state->i2c_edid, reg, val); |
| 480 | } |
| 481 | |
| 482 | static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val) |
| 483 | { |
| 484 | struct adv7604_state *state = to_state(sd); |
| 485 | struct i2c_client *client = state->i2c_edid; |
| 486 | u8 msgbuf0[1] = { 0 }; |
| 487 | u8 msgbuf1[256]; |
Shubhrajyoti D | 09f2967 | 2012-10-25 01:02:36 -0300 | [diff] [blame] | 488 | struct i2c_msg msg[2] = { |
| 489 | { |
| 490 | .addr = client->addr, |
| 491 | .len = 1, |
| 492 | .buf = msgbuf0 |
| 493 | }, |
| 494 | { |
| 495 | .addr = client->addr, |
| 496 | .flags = I2C_M_RD, |
| 497 | .len = len, |
| 498 | .buf = msgbuf1 |
| 499 | }, |
| 500 | }; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 501 | |
| 502 | if (i2c_transfer(client->adapter, msg, 2) < 0) |
| 503 | return -EIO; |
| 504 | memcpy(val, msgbuf1, len); |
| 505 | return 0; |
| 506 | } |
| 507 | |
| 508 | static void adv7604_delayed_work_enable_hotplug(struct work_struct *work) |
| 509 | { |
| 510 | struct delayed_work *dwork = to_delayed_work(work); |
| 511 | struct adv7604_state *state = container_of(dwork, struct adv7604_state, |
| 512 | delayed_work_enable_hotplug); |
| 513 | struct v4l2_subdev *sd = &state->sd; |
| 514 | |
| 515 | v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__); |
| 516 | |
| 517 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)1); |
| 518 | } |
| 519 | |
| 520 | static inline int edid_write_block(struct v4l2_subdev *sd, |
| 521 | unsigned len, const u8 *val) |
| 522 | { |
| 523 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 524 | struct adv7604_state *state = to_state(sd); |
| 525 | int err = 0; |
| 526 | int i; |
| 527 | |
| 528 | v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len); |
| 529 | |
| 530 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); |
| 531 | |
| 532 | /* Disables I2C access to internal EDID ram from DDC port */ |
| 533 | rep_write_and_or(sd, 0x77, 0xf0, 0x0); |
| 534 | |
| 535 | for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) |
| 536 | err = adv_smbus_write_i2c_block_data(state->i2c_edid, i, |
| 537 | I2C_SMBUS_BLOCK_MAX, val + i); |
| 538 | if (err) |
| 539 | return err; |
| 540 | |
| 541 | /* adv7604 calculates the checksums and enables I2C access to internal |
| 542 | EDID ram from DDC port. */ |
| 543 | rep_write_and_or(sd, 0x77, 0xf0, 0x1); |
| 544 | |
| 545 | for (i = 0; i < 1000; i++) { |
| 546 | if (rep_read(sd, 0x7d) & 1) |
| 547 | break; |
| 548 | mdelay(1); |
| 549 | } |
| 550 | if (i == 1000) { |
| 551 | v4l_err(client, "error enabling edid\n"); |
| 552 | return -EIO; |
| 553 | } |
| 554 | |
| 555 | /* enable hotplug after 100 ms */ |
| 556 | queue_delayed_work(state->work_queues, |
| 557 | &state->delayed_work_enable_hotplug, HZ / 10); |
| 558 | return 0; |
| 559 | } |
| 560 | |
| 561 | static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg) |
| 562 | { |
| 563 | struct adv7604_state *state = to_state(sd); |
| 564 | |
| 565 | return adv_smbus_read_byte_data(state->i2c_hdmi, reg); |
| 566 | } |
| 567 | |
| 568 | static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 569 | { |
| 570 | struct adv7604_state *state = to_state(sd); |
| 571 | |
| 572 | return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val); |
| 573 | } |
| 574 | |
| 575 | static inline int test_read(struct v4l2_subdev *sd, u8 reg) |
| 576 | { |
| 577 | struct adv7604_state *state = to_state(sd); |
| 578 | |
| 579 | return adv_smbus_read_byte_data(state->i2c_test, reg); |
| 580 | } |
| 581 | |
| 582 | static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 583 | { |
| 584 | struct adv7604_state *state = to_state(sd); |
| 585 | |
| 586 | return adv_smbus_write_byte_data(state->i2c_test, reg, val); |
| 587 | } |
| 588 | |
| 589 | static inline int cp_read(struct v4l2_subdev *sd, u8 reg) |
| 590 | { |
| 591 | struct adv7604_state *state = to_state(sd); |
| 592 | |
| 593 | return adv_smbus_read_byte_data(state->i2c_cp, reg); |
| 594 | } |
| 595 | |
| 596 | static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 597 | { |
| 598 | struct adv7604_state *state = to_state(sd); |
| 599 | |
| 600 | return adv_smbus_write_byte_data(state->i2c_cp, reg, val); |
| 601 | } |
| 602 | |
| 603 | static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| 604 | { |
| 605 | return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val); |
| 606 | } |
| 607 | |
| 608 | static inline int vdp_read(struct v4l2_subdev *sd, u8 reg) |
| 609 | { |
| 610 | struct adv7604_state *state = to_state(sd); |
| 611 | |
| 612 | return adv_smbus_read_byte_data(state->i2c_vdp, reg); |
| 613 | } |
| 614 | |
| 615 | static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 616 | { |
| 617 | struct adv7604_state *state = to_state(sd); |
| 618 | |
| 619 | return adv_smbus_write_byte_data(state->i2c_vdp, reg, val); |
| 620 | } |
| 621 | |
| 622 | /* ----------------------------------------------------------------------- */ |
| 623 | |
| 624 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 625 | static void adv7604_inv_register(struct v4l2_subdev *sd) |
| 626 | { |
| 627 | v4l2_info(sd, "0x000-0x0ff: IO Map\n"); |
| 628 | v4l2_info(sd, "0x100-0x1ff: AVLink Map\n"); |
| 629 | v4l2_info(sd, "0x200-0x2ff: CEC Map\n"); |
| 630 | v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n"); |
| 631 | v4l2_info(sd, "0x400-0x4ff: ESDP Map\n"); |
| 632 | v4l2_info(sd, "0x500-0x5ff: DPP Map\n"); |
| 633 | v4l2_info(sd, "0x600-0x6ff: AFE Map\n"); |
| 634 | v4l2_info(sd, "0x700-0x7ff: Repeater Map\n"); |
| 635 | v4l2_info(sd, "0x800-0x8ff: EDID Map\n"); |
| 636 | v4l2_info(sd, "0x900-0x9ff: HDMI Map\n"); |
| 637 | v4l2_info(sd, "0xa00-0xaff: Test Map\n"); |
| 638 | v4l2_info(sd, "0xb00-0xbff: CP Map\n"); |
| 639 | v4l2_info(sd, "0xc00-0xcff: VDP Map\n"); |
| 640 | } |
| 641 | |
| 642 | static int adv7604_g_register(struct v4l2_subdev *sd, |
| 643 | struct v4l2_dbg_register *reg) |
| 644 | { |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 645 | reg->size = 1; |
| 646 | switch (reg->reg >> 8) { |
| 647 | case 0: |
| 648 | reg->val = io_read(sd, reg->reg & 0xff); |
| 649 | break; |
| 650 | case 1: |
| 651 | reg->val = avlink_read(sd, reg->reg & 0xff); |
| 652 | break; |
| 653 | case 2: |
| 654 | reg->val = cec_read(sd, reg->reg & 0xff); |
| 655 | break; |
| 656 | case 3: |
| 657 | reg->val = infoframe_read(sd, reg->reg & 0xff); |
| 658 | break; |
| 659 | case 4: |
| 660 | reg->val = esdp_read(sd, reg->reg & 0xff); |
| 661 | break; |
| 662 | case 5: |
| 663 | reg->val = dpp_read(sd, reg->reg & 0xff); |
| 664 | break; |
| 665 | case 6: |
| 666 | reg->val = afe_read(sd, reg->reg & 0xff); |
| 667 | break; |
| 668 | case 7: |
| 669 | reg->val = rep_read(sd, reg->reg & 0xff); |
| 670 | break; |
| 671 | case 8: |
| 672 | reg->val = edid_read(sd, reg->reg & 0xff); |
| 673 | break; |
| 674 | case 9: |
| 675 | reg->val = hdmi_read(sd, reg->reg & 0xff); |
| 676 | break; |
| 677 | case 0xa: |
| 678 | reg->val = test_read(sd, reg->reg & 0xff); |
| 679 | break; |
| 680 | case 0xb: |
| 681 | reg->val = cp_read(sd, reg->reg & 0xff); |
| 682 | break; |
| 683 | case 0xc: |
| 684 | reg->val = vdp_read(sd, reg->reg & 0xff); |
| 685 | break; |
| 686 | default: |
| 687 | v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| 688 | adv7604_inv_register(sd); |
| 689 | break; |
| 690 | } |
| 691 | return 0; |
| 692 | } |
| 693 | |
| 694 | static int adv7604_s_register(struct v4l2_subdev *sd, |
Hans Verkuil | 977ba3b1 | 2013-03-24 08:28:46 -0300 | [diff] [blame] | 695 | const struct v4l2_dbg_register *reg) |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 696 | { |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 697 | switch (reg->reg >> 8) { |
| 698 | case 0: |
| 699 | io_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 700 | break; |
| 701 | case 1: |
| 702 | avlink_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 703 | break; |
| 704 | case 2: |
| 705 | cec_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 706 | break; |
| 707 | case 3: |
| 708 | infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 709 | break; |
| 710 | case 4: |
| 711 | esdp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 712 | break; |
| 713 | case 5: |
| 714 | dpp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 715 | break; |
| 716 | case 6: |
| 717 | afe_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 718 | break; |
| 719 | case 7: |
| 720 | rep_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 721 | break; |
| 722 | case 8: |
| 723 | edid_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 724 | break; |
| 725 | case 9: |
| 726 | hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 727 | break; |
| 728 | case 0xa: |
| 729 | test_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 730 | break; |
| 731 | case 0xb: |
| 732 | cp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 733 | break; |
| 734 | case 0xc: |
| 735 | vdp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| 736 | break; |
| 737 | default: |
| 738 | v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| 739 | adv7604_inv_register(sd); |
| 740 | break; |
| 741 | } |
| 742 | return 0; |
| 743 | } |
| 744 | #endif |
| 745 | |
| 746 | static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) |
| 747 | { |
| 748 | struct adv7604_state *state = to_state(sd); |
| 749 | |
| 750 | /* port A only */ |
| 751 | return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, |
| 752 | ((io_read(sd, 0x6f) & 0x10) >> 4)); |
| 753 | } |
| 754 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 755 | static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd, |
| 756 | u8 prim_mode, |
| 757 | const struct adv7604_video_standards *predef_vid_timings, |
| 758 | const struct v4l2_dv_timings *timings) |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 759 | { |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 760 | struct adv7604_state *state = to_state(sd); |
| 761 | int i; |
| 762 | |
| 763 | for (i = 0; predef_vid_timings[i].timings.bt.width; i++) { |
| 764 | if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings, |
| 765 | DIGITAL_INPUT ? 250000 : 1000000)) |
| 766 | continue; |
| 767 | io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */ |
| 768 | io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) + |
| 769 | prim_mode); /* v_freq and prim mode */ |
| 770 | return 0; |
| 771 | } |
| 772 | |
| 773 | return -1; |
| 774 | } |
| 775 | |
| 776 | static int configure_predefined_video_timings(struct v4l2_subdev *sd, |
| 777 | struct v4l2_dv_timings *timings) |
| 778 | { |
| 779 | struct adv7604_state *state = to_state(sd); |
| 780 | int err; |
| 781 | |
| 782 | v4l2_dbg(1, debug, sd, "%s", __func__); |
| 783 | |
| 784 | /* reset to default values */ |
| 785 | io_write(sd, 0x16, 0x43); |
| 786 | io_write(sd, 0x17, 0x5a); |
| 787 | /* disable embedded syncs for auto graphics mode */ |
| 788 | cp_write_and_or(sd, 0x81, 0xef, 0x00); |
| 789 | cp_write(sd, 0x8f, 0x00); |
| 790 | cp_write(sd, 0x90, 0x00); |
| 791 | cp_write(sd, 0xa2, 0x00); |
| 792 | cp_write(sd, 0xa3, 0x00); |
| 793 | cp_write(sd, 0xa4, 0x00); |
| 794 | cp_write(sd, 0xa5, 0x00); |
| 795 | cp_write(sd, 0xa6, 0x00); |
| 796 | cp_write(sd, 0xa7, 0x00); |
| 797 | cp_write(sd, 0xab, 0x00); |
| 798 | cp_write(sd, 0xac, 0x00); |
| 799 | |
| 800 | switch (state->mode) { |
| 801 | case ADV7604_MODE_COMP: |
| 802 | case ADV7604_MODE_GR: |
| 803 | err = find_and_set_predefined_video_timings(sd, |
| 804 | 0x01, adv7604_prim_mode_comp, timings); |
| 805 | if (err) |
| 806 | err = find_and_set_predefined_video_timings(sd, |
| 807 | 0x02, adv7604_prim_mode_gr, timings); |
| 808 | break; |
| 809 | case ADV7604_MODE_HDMI: |
| 810 | err = find_and_set_predefined_video_timings(sd, |
| 811 | 0x05, adv7604_prim_mode_hdmi_comp, timings); |
| 812 | if (err) |
| 813 | err = find_and_set_predefined_video_timings(sd, |
| 814 | 0x06, adv7604_prim_mode_hdmi_gr, timings); |
| 815 | break; |
| 816 | default: |
| 817 | v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", |
| 818 | __func__, state->mode); |
| 819 | err = -1; |
| 820 | break; |
| 821 | } |
| 822 | |
| 823 | |
| 824 | return err; |
| 825 | } |
| 826 | |
| 827 | static void configure_custom_video_timings(struct v4l2_subdev *sd, |
| 828 | const struct v4l2_bt_timings *bt) |
| 829 | { |
| 830 | struct adv7604_state *state = to_state(sd); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 831 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 832 | u32 width = htotal(bt); |
| 833 | u32 height = vtotal(bt); |
| 834 | u16 cp_start_sav = bt->hsync + bt->hbackporch - 4; |
| 835 | u16 cp_start_eav = width - bt->hfrontporch; |
| 836 | u16 cp_start_vbi = height - bt->vfrontporch; |
| 837 | u16 cp_end_vbi = bt->vsync + bt->vbackporch; |
| 838 | u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ? |
| 839 | ((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0; |
| 840 | const u8 pll[2] = { |
| 841 | 0xc0 | ((width >> 8) & 0x1f), |
| 842 | width & 0xff |
| 843 | }; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 844 | |
| 845 | v4l2_dbg(2, debug, sd, "%s\n", __func__); |
| 846 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 847 | switch (state->mode) { |
| 848 | case ADV7604_MODE_COMP: |
| 849 | case ADV7604_MODE_GR: |
| 850 | /* auto graphics */ |
| 851 | io_write(sd, 0x00, 0x07); /* video std */ |
| 852 | io_write(sd, 0x01, 0x02); /* prim mode */ |
| 853 | /* enable embedded syncs for auto graphics mode */ |
| 854 | cp_write_and_or(sd, 0x81, 0xef, 0x10); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 855 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 856 | /* Should only be set in auto-graphics mode [REF_02, p. 91-92] */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 857 | /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ |
| 858 | /* IO-map reg. 0x16 and 0x17 should be written in sequence */ |
| 859 | if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { |
| 860 | v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 861 | break; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 862 | } |
| 863 | |
| 864 | /* active video - horizontal timing */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 865 | cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 866 | cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | |
| 867 | ((cp_start_eav >> 8) & 0x0f)); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 868 | cp_write(sd, 0xa4, cp_start_eav & 0xff); |
| 869 | |
| 870 | /* active video - vertical timing */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 871 | cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 872 | cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | |
| 873 | ((cp_end_vbi >> 8) & 0xf)); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 874 | cp_write(sd, 0xa7, cp_end_vbi & 0xff); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 875 | break; |
| 876 | case ADV7604_MODE_HDMI: |
| 877 | /* set default prim_mode/vid_std for HDMI |
| 878 | accoring to [REF_03, c. 4.2] */ |
| 879 | io_write(sd, 0x00, 0x02); /* video std */ |
| 880 | io_write(sd, 0x01, 0x06); /* prim mode */ |
| 881 | break; |
| 882 | default: |
| 883 | v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", |
| 884 | __func__, state->mode); |
| 885 | break; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 886 | } |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 887 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 888 | cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); |
| 889 | cp_write(sd, 0x90, ch1_fr_ll & 0xff); |
| 890 | cp_write(sd, 0xab, (height >> 4) & 0xff); |
| 891 | cp_write(sd, 0xac, (height & 0x0f) << 4); |
| 892 | } |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 893 | |
| 894 | static void set_rgb_quantization_range(struct v4l2_subdev *sd) |
| 895 | { |
| 896 | struct adv7604_state *state = to_state(sd); |
| 897 | |
| 898 | switch (state->rgb_quantization_range) { |
| 899 | case V4L2_DV_RGB_RANGE_AUTO: |
| 900 | /* automatic */ |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 901 | if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) { |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 902 | /* receiving DVI-D signal */ |
| 903 | |
| 904 | /* ADV7604 selects RGB limited range regardless of |
| 905 | input format (CE/IT) in automatic mode */ |
| 906 | if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| 907 | /* RGB limited range (16-235) */ |
| 908 | io_write_and_or(sd, 0x02, 0x0f, 0x00); |
| 909 | |
| 910 | } else { |
| 911 | /* RGB full range (0-255) */ |
| 912 | io_write_and_or(sd, 0x02, 0x0f, 0x10); |
| 913 | } |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 914 | } else { |
| 915 | /* receiving HDMI or analog signal, set automode */ |
| 916 | io_write_and_or(sd, 0x02, 0x0f, 0xf0); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 917 | } |
| 918 | break; |
| 919 | case V4L2_DV_RGB_RANGE_LIMITED: |
| 920 | /* RGB limited range (16-235) */ |
| 921 | io_write_and_or(sd, 0x02, 0x0f, 0x00); |
| 922 | break; |
| 923 | case V4L2_DV_RGB_RANGE_FULL: |
| 924 | /* RGB full range (0-255) */ |
| 925 | io_write_and_or(sd, 0x02, 0x0f, 0x10); |
| 926 | break; |
| 927 | } |
| 928 | } |
| 929 | |
| 930 | |
| 931 | static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl) |
| 932 | { |
| 933 | struct v4l2_subdev *sd = to_sd(ctrl); |
| 934 | struct adv7604_state *state = to_state(sd); |
| 935 | |
| 936 | switch (ctrl->id) { |
| 937 | case V4L2_CID_BRIGHTNESS: |
| 938 | cp_write(sd, 0x3c, ctrl->val); |
| 939 | return 0; |
| 940 | case V4L2_CID_CONTRAST: |
| 941 | cp_write(sd, 0x3a, ctrl->val); |
| 942 | return 0; |
| 943 | case V4L2_CID_SATURATION: |
| 944 | cp_write(sd, 0x3b, ctrl->val); |
| 945 | return 0; |
| 946 | case V4L2_CID_HUE: |
| 947 | cp_write(sd, 0x3d, ctrl->val); |
| 948 | return 0; |
| 949 | case V4L2_CID_DV_RX_RGB_RANGE: |
| 950 | state->rgb_quantization_range = ctrl->val; |
| 951 | set_rgb_quantization_range(sd); |
| 952 | return 0; |
| 953 | case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE: |
| 954 | /* Set the analog sampling phase. This is needed to find the |
| 955 | best sampling phase for analog video: an application or |
| 956 | driver has to try a number of phases and analyze the picture |
| 957 | quality before settling on the best performing phase. */ |
| 958 | afe_write(sd, 0xc8, ctrl->val); |
| 959 | return 0; |
| 960 | case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL: |
| 961 | /* Use the default blue color for free running mode, |
| 962 | or supply your own. */ |
| 963 | cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2)); |
| 964 | return 0; |
| 965 | case V4L2_CID_ADV_RX_FREE_RUN_COLOR: |
| 966 | cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16); |
| 967 | cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8); |
| 968 | cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff)); |
| 969 | return 0; |
| 970 | } |
| 971 | return -EINVAL; |
| 972 | } |
| 973 | |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 974 | /* ----------------------------------------------------------------------- */ |
| 975 | |
| 976 | static inline bool no_power(struct v4l2_subdev *sd) |
| 977 | { |
| 978 | /* Entire chip or CP powered off */ |
| 979 | return io_read(sd, 0x0c) & 0x24; |
| 980 | } |
| 981 | |
| 982 | static inline bool no_signal_tmds(struct v4l2_subdev *sd) |
| 983 | { |
| 984 | /* TODO port B, C and D */ |
| 985 | return !(io_read(sd, 0x6a) & 0x10); |
| 986 | } |
| 987 | |
| 988 | static inline bool no_lock_tmds(struct v4l2_subdev *sd) |
| 989 | { |
| 990 | return (io_read(sd, 0x6a) & 0xe0) != 0xe0; |
| 991 | } |
| 992 | |
| 993 | static inline bool no_lock_sspd(struct v4l2_subdev *sd) |
| 994 | { |
| 995 | /* TODO channel 2 */ |
| 996 | return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0); |
| 997 | } |
| 998 | |
| 999 | static inline bool no_lock_stdi(struct v4l2_subdev *sd) |
| 1000 | { |
| 1001 | /* TODO channel 2 */ |
| 1002 | return !(cp_read(sd, 0xb1) & 0x80); |
| 1003 | } |
| 1004 | |
| 1005 | static inline bool no_signal(struct v4l2_subdev *sd) |
| 1006 | { |
| 1007 | struct adv7604_state *state = to_state(sd); |
| 1008 | bool ret; |
| 1009 | |
| 1010 | ret = no_power(sd); |
| 1011 | |
| 1012 | ret |= no_lock_stdi(sd); |
| 1013 | ret |= no_lock_sspd(sd); |
| 1014 | |
| 1015 | if (DIGITAL_INPUT) { |
| 1016 | ret |= no_lock_tmds(sd); |
| 1017 | ret |= no_signal_tmds(sd); |
| 1018 | } |
| 1019 | |
| 1020 | return ret; |
| 1021 | } |
| 1022 | |
| 1023 | static inline bool no_lock_cp(struct v4l2_subdev *sd) |
| 1024 | { |
| 1025 | /* CP has detected a non standard number of lines on the incoming |
| 1026 | video compared to what it is configured to receive by s_dv_timings */ |
| 1027 | return io_read(sd, 0x12) & 0x01; |
| 1028 | } |
| 1029 | |
| 1030 | static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status) |
| 1031 | { |
| 1032 | struct adv7604_state *state = to_state(sd); |
| 1033 | |
| 1034 | *status = 0; |
| 1035 | *status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0; |
| 1036 | *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; |
| 1037 | if (no_lock_cp(sd)) |
| 1038 | *status |= DIGITAL_INPUT ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK; |
| 1039 | |
| 1040 | v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); |
| 1041 | |
| 1042 | return 0; |
| 1043 | } |
| 1044 | |
| 1045 | /* ----------------------------------------------------------------------- */ |
| 1046 | |
| 1047 | static void adv7604_print_timings(struct v4l2_subdev *sd, |
| 1048 | struct v4l2_dv_timings *timings, const char *txt, bool detailed) |
| 1049 | { |
| 1050 | struct v4l2_bt_timings *bt = &timings->bt; |
| 1051 | u32 htot, vtot; |
| 1052 | |
| 1053 | if (timings->type != V4L2_DV_BT_656_1120) |
| 1054 | return; |
| 1055 | |
| 1056 | htot = htotal(bt); |
| 1057 | vtot = vtotal(bt); |
| 1058 | |
| 1059 | v4l2_info(sd, "%s %dx%d%s%d (%dx%d)", |
| 1060 | txt, bt->width, bt->height, bt->interlaced ? "i" : "p", |
| 1061 | (htot * vtot) > 0 ? ((u32)bt->pixelclock / |
| 1062 | (htot * vtot)) : 0, |
| 1063 | htot, vtot); |
| 1064 | |
| 1065 | if (detailed) { |
| 1066 | v4l2_info(sd, " horizontal: fp = %d, %ssync = %d, bp = %d\n", |
| 1067 | bt->hfrontporch, |
| 1068 | (bt->polarities & V4L2_DV_HSYNC_POS_POL) ? "+" : "-", |
| 1069 | bt->hsync, bt->hbackporch); |
| 1070 | v4l2_info(sd, " vertical: fp = %d, %ssync = %d, bp = %d\n", |
| 1071 | bt->vfrontporch, |
| 1072 | (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", |
| 1073 | bt->vsync, bt->vbackporch); |
| 1074 | v4l2_info(sd, " pixelclock: %lld, flags: 0x%x, standards: 0x%x\n", |
| 1075 | bt->pixelclock, bt->flags, bt->standards); |
| 1076 | } |
| 1077 | } |
| 1078 | |
| 1079 | struct stdi_readback { |
| 1080 | u16 bl, lcf, lcvs; |
| 1081 | u8 hs_pol, vs_pol; |
| 1082 | bool interlaced; |
| 1083 | }; |
| 1084 | |
| 1085 | static int stdi2dv_timings(struct v4l2_subdev *sd, |
| 1086 | struct stdi_readback *stdi, |
| 1087 | struct v4l2_dv_timings *timings) |
| 1088 | { |
| 1089 | struct adv7604_state *state = to_state(sd); |
| 1090 | u32 hfreq = (ADV7604_fsc * 8) / stdi->bl; |
| 1091 | u32 pix_clk; |
| 1092 | int i; |
| 1093 | |
| 1094 | for (i = 0; adv7604_timings[i].bt.height; i++) { |
| 1095 | if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1) |
| 1096 | continue; |
| 1097 | if (adv7604_timings[i].bt.vsync != stdi->lcvs) |
| 1098 | continue; |
| 1099 | |
| 1100 | pix_clk = hfreq * htotal(&adv7604_timings[i].bt); |
| 1101 | |
| 1102 | if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) && |
| 1103 | (pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) { |
| 1104 | *timings = adv7604_timings[i]; |
| 1105 | return 0; |
| 1106 | } |
| 1107 | } |
| 1108 | |
| 1109 | if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, |
| 1110 | (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | |
| 1111 | (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), |
| 1112 | timings)) |
| 1113 | return 0; |
| 1114 | if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs, |
| 1115 | (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | |
| 1116 | (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), |
| 1117 | state->aspect_ratio, timings)) |
| 1118 | return 0; |
| 1119 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 1120 | v4l2_dbg(2, debug, sd, |
| 1121 | "%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n", |
| 1122 | __func__, stdi->lcvs, stdi->lcf, stdi->bl, |
| 1123 | stdi->hs_pol, stdi->vs_pol); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1124 | return -1; |
| 1125 | } |
| 1126 | |
| 1127 | static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi) |
| 1128 | { |
| 1129 | if (no_lock_stdi(sd) || no_lock_sspd(sd)) { |
| 1130 | v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__); |
| 1131 | return -1; |
| 1132 | } |
| 1133 | |
| 1134 | /* read STDI */ |
| 1135 | stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2); |
| 1136 | stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4); |
| 1137 | stdi->lcvs = cp_read(sd, 0xb3) >> 3; |
| 1138 | stdi->interlaced = io_read(sd, 0x12) & 0x10; |
| 1139 | |
| 1140 | /* read SSPD */ |
| 1141 | if ((cp_read(sd, 0xb5) & 0x03) == 0x01) { |
| 1142 | stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ? |
| 1143 | ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x'); |
| 1144 | stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ? |
| 1145 | ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x'); |
| 1146 | } else { |
| 1147 | stdi->hs_pol = 'x'; |
| 1148 | stdi->vs_pol = 'x'; |
| 1149 | } |
| 1150 | |
| 1151 | if (no_lock_stdi(sd) || no_lock_sspd(sd)) { |
| 1152 | v4l2_dbg(2, debug, sd, |
| 1153 | "%s: signal lost during readout of STDI/SSPD\n", __func__); |
| 1154 | return -1; |
| 1155 | } |
| 1156 | |
| 1157 | if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) { |
| 1158 | v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__); |
| 1159 | memset(stdi, 0, sizeof(struct stdi_readback)); |
| 1160 | return -1; |
| 1161 | } |
| 1162 | |
| 1163 | v4l2_dbg(2, debug, sd, |
| 1164 | "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n", |
| 1165 | __func__, stdi->lcf, stdi->bl, stdi->lcvs, |
| 1166 | stdi->hs_pol, stdi->vs_pol, |
| 1167 | stdi->interlaced ? "interlaced" : "progressive"); |
| 1168 | |
| 1169 | return 0; |
| 1170 | } |
| 1171 | |
| 1172 | static int adv7604_enum_dv_timings(struct v4l2_subdev *sd, |
| 1173 | struct v4l2_enum_dv_timings *timings) |
| 1174 | { |
| 1175 | if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1) |
| 1176 | return -EINVAL; |
| 1177 | memset(timings->reserved, 0, sizeof(timings->reserved)); |
| 1178 | timings->timings = adv7604_timings[timings->index]; |
| 1179 | return 0; |
| 1180 | } |
| 1181 | |
| 1182 | static int adv7604_dv_timings_cap(struct v4l2_subdev *sd, |
| 1183 | struct v4l2_dv_timings_cap *cap) |
| 1184 | { |
| 1185 | struct adv7604_state *state = to_state(sd); |
| 1186 | |
| 1187 | cap->type = V4L2_DV_BT_656_1120; |
| 1188 | cap->bt.max_width = 1920; |
| 1189 | cap->bt.max_height = 1200; |
| 1190 | cap->bt.min_pixelclock = 27000000; |
| 1191 | if (DIGITAL_INPUT) |
| 1192 | cap->bt.max_pixelclock = 225000000; |
| 1193 | else |
| 1194 | cap->bt.max_pixelclock = 170000000; |
| 1195 | cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | |
| 1196 | V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; |
| 1197 | cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | |
| 1198 | V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; |
| 1199 | return 0; |
| 1200 | } |
| 1201 | |
| 1202 | /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings |
| 1203 | if the format is listed in adv7604_timings[] */ |
| 1204 | static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, |
| 1205 | struct v4l2_dv_timings *timings) |
| 1206 | { |
| 1207 | struct adv7604_state *state = to_state(sd); |
| 1208 | int i; |
| 1209 | |
| 1210 | for (i = 0; adv7604_timings[i].bt.width; i++) { |
| 1211 | if (v4l_match_dv_timings(timings, &adv7604_timings[i], |
| 1212 | DIGITAL_INPUT ? 250000 : 1000000)) { |
| 1213 | *timings = adv7604_timings[i]; |
| 1214 | break; |
| 1215 | } |
| 1216 | } |
| 1217 | } |
| 1218 | |
| 1219 | static int adv7604_query_dv_timings(struct v4l2_subdev *sd, |
| 1220 | struct v4l2_dv_timings *timings) |
| 1221 | { |
| 1222 | struct adv7604_state *state = to_state(sd); |
| 1223 | struct v4l2_bt_timings *bt = &timings->bt; |
| 1224 | struct stdi_readback stdi; |
| 1225 | |
| 1226 | if (!timings) |
| 1227 | return -EINVAL; |
| 1228 | |
| 1229 | memset(timings, 0, sizeof(struct v4l2_dv_timings)); |
| 1230 | |
| 1231 | if (no_signal(sd)) { |
| 1232 | v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); |
| 1233 | return -ENOLINK; |
| 1234 | } |
| 1235 | |
| 1236 | /* read STDI */ |
| 1237 | if (read_stdi(sd, &stdi)) { |
| 1238 | v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__); |
| 1239 | return -ENOLINK; |
| 1240 | } |
| 1241 | bt->interlaced = stdi.interlaced ? |
| 1242 | V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; |
| 1243 | |
| 1244 | if (DIGITAL_INPUT) { |
| 1245 | timings->type = V4L2_DV_BT_656_1120; |
| 1246 | |
| 1247 | bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08); |
| 1248 | bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a); |
| 1249 | bt->pixelclock = (hdmi_read(sd, 0x06) * 1000000) + |
| 1250 | ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000; |
| 1251 | bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 + |
| 1252 | hdmi_read(sd, 0x21); |
| 1253 | bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 + |
| 1254 | hdmi_read(sd, 0x23); |
| 1255 | bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 + |
| 1256 | hdmi_read(sd, 0x25); |
| 1257 | bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 + |
| 1258 | hdmi_read(sd, 0x2b)) / 2; |
| 1259 | bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 + |
| 1260 | hdmi_read(sd, 0x2f)) / 2; |
| 1261 | bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 + |
| 1262 | hdmi_read(sd, 0x33)) / 2; |
| 1263 | bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) | |
| 1264 | ((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0); |
| 1265 | if (bt->interlaced == V4L2_DV_INTERLACED) { |
| 1266 | bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 + |
| 1267 | hdmi_read(sd, 0x0c); |
| 1268 | bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 + |
| 1269 | hdmi_read(sd, 0x2d)) / 2; |
| 1270 | bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 + |
| 1271 | hdmi_read(sd, 0x31)) / 2; |
| 1272 | bt->vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 + |
| 1273 | hdmi_read(sd, 0x35)) / 2; |
| 1274 | } |
| 1275 | adv7604_fill_optional_dv_timings_fields(sd, timings); |
| 1276 | } else { |
| 1277 | /* find format |
Hans Verkuil | 8093964 | 2012-10-16 05:46:21 -0300 | [diff] [blame] | 1278 | * Since LCVS values are inaccurate [REF_03, p. 275-276], |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1279 | * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. |
| 1280 | */ |
| 1281 | if (!stdi2dv_timings(sd, &stdi, timings)) |
| 1282 | goto found; |
| 1283 | stdi.lcvs += 1; |
| 1284 | v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs); |
| 1285 | if (!stdi2dv_timings(sd, &stdi, timings)) |
| 1286 | goto found; |
| 1287 | stdi.lcvs -= 2; |
| 1288 | v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); |
| 1289 | if (stdi2dv_timings(sd, &stdi, timings)) { |
Hans Verkuil | cf9afb1 | 2012-10-16 10:12:55 -0300 | [diff] [blame] | 1290 | /* |
| 1291 | * The STDI block may measure wrong values, especially |
| 1292 | * for lcvs and lcf. If the driver can not find any |
| 1293 | * valid timing, the STDI block is restarted to measure |
| 1294 | * the video timings again. The function will return an |
| 1295 | * error, but the restart of STDI will generate a new |
| 1296 | * STDI interrupt and the format detection process will |
| 1297 | * restart. |
| 1298 | */ |
| 1299 | if (state->restart_stdi_once) { |
| 1300 | v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__); |
| 1301 | /* TODO restart STDI for Sync Channel 2 */ |
| 1302 | /* enter one-shot mode */ |
| 1303 | cp_write_and_or(sd, 0x86, 0xf9, 0x00); |
| 1304 | /* trigger STDI restart */ |
| 1305 | cp_write_and_or(sd, 0x86, 0xf9, 0x04); |
| 1306 | /* reset to continuous mode */ |
| 1307 | cp_write_and_or(sd, 0x86, 0xf9, 0x02); |
| 1308 | state->restart_stdi_once = false; |
| 1309 | return -ENOLINK; |
| 1310 | } |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1311 | v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); |
| 1312 | return -ERANGE; |
| 1313 | } |
Hans Verkuil | cf9afb1 | 2012-10-16 10:12:55 -0300 | [diff] [blame] | 1314 | state->restart_stdi_once = true; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1315 | } |
| 1316 | found: |
| 1317 | |
| 1318 | if (no_signal(sd)) { |
| 1319 | v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__); |
| 1320 | memset(timings, 0, sizeof(struct v4l2_dv_timings)); |
| 1321 | return -ENOLINK; |
| 1322 | } |
| 1323 | |
| 1324 | if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || |
| 1325 | (DIGITAL_INPUT && bt->pixelclock > 225000000)) { |
| 1326 | v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", |
| 1327 | __func__, (u32)bt->pixelclock); |
| 1328 | return -ERANGE; |
| 1329 | } |
| 1330 | |
| 1331 | if (debug > 1) |
| 1332 | adv7604_print_timings(sd, timings, |
| 1333 | "adv7604_query_dv_timings:", true); |
| 1334 | |
| 1335 | return 0; |
| 1336 | } |
| 1337 | |
| 1338 | static int adv7604_s_dv_timings(struct v4l2_subdev *sd, |
| 1339 | struct v4l2_dv_timings *timings) |
| 1340 | { |
| 1341 | struct adv7604_state *state = to_state(sd); |
| 1342 | struct v4l2_bt_timings *bt; |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 1343 | int err; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1344 | |
| 1345 | if (!timings) |
| 1346 | return -EINVAL; |
| 1347 | |
| 1348 | bt = &timings->bt; |
| 1349 | |
| 1350 | if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || |
| 1351 | (DIGITAL_INPUT && bt->pixelclock > 225000000)) { |
| 1352 | v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", |
| 1353 | __func__, (u32)bt->pixelclock); |
| 1354 | return -ERANGE; |
| 1355 | } |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 1356 | |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1357 | adv7604_fill_optional_dv_timings_fields(sd, timings); |
| 1358 | |
| 1359 | state->timings = *timings; |
| 1360 | |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 1361 | cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10); |
| 1362 | |
| 1363 | /* Use prim_mode and vid_std when available */ |
| 1364 | err = configure_predefined_video_timings(sd, timings); |
| 1365 | if (err) { |
| 1366 | /* custom settings when the video format |
| 1367 | does not have prim_mode/vid_std */ |
| 1368 | configure_custom_video_timings(sd, bt); |
| 1369 | } |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1370 | |
| 1371 | set_rgb_quantization_range(sd); |
| 1372 | |
| 1373 | |
| 1374 | if (debug > 1) |
| 1375 | adv7604_print_timings(sd, timings, |
| 1376 | "adv7604_s_dv_timings:", true); |
| 1377 | return 0; |
| 1378 | } |
| 1379 | |
| 1380 | static int adv7604_g_dv_timings(struct v4l2_subdev *sd, |
| 1381 | struct v4l2_dv_timings *timings) |
| 1382 | { |
| 1383 | struct adv7604_state *state = to_state(sd); |
| 1384 | |
| 1385 | *timings = state->timings; |
| 1386 | return 0; |
| 1387 | } |
| 1388 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1389 | static void enable_input(struct v4l2_subdev *sd) |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1390 | { |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1391 | struct adv7604_state *state = to_state(sd); |
| 1392 | |
| 1393 | switch (state->mode) { |
| 1394 | case ADV7604_MODE_COMP: |
| 1395 | case ADV7604_MODE_GR: |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1396 | /* enable */ |
| 1397 | io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ |
| 1398 | break; |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1399 | case ADV7604_MODE_HDMI: |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1400 | /* enable */ |
| 1401 | hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ |
| 1402 | hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ |
| 1403 | io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ |
| 1404 | break; |
| 1405 | default: |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1406 | v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", |
| 1407 | __func__, state->mode); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1408 | break; |
| 1409 | } |
| 1410 | } |
| 1411 | |
| 1412 | static void disable_input(struct v4l2_subdev *sd) |
| 1413 | { |
| 1414 | /* disable */ |
| 1415 | io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */ |
| 1416 | hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */ |
| 1417 | hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ |
| 1418 | } |
| 1419 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1420 | static void select_input(struct v4l2_subdev *sd) |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1421 | { |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1422 | struct adv7604_state *state = to_state(sd); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1423 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1424 | switch (state->mode) { |
| 1425 | case ADV7604_MODE_COMP: |
| 1426 | case ADV7604_MODE_GR: |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1427 | /* reset ADI recommended settings for HDMI: */ |
| 1428 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ |
| 1429 | hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ |
| 1430 | hdmi_write(sd, 0x3d, 0x00); /* DDC bus active pull-up control */ |
| 1431 | hdmi_write(sd, 0x3e, 0x74); /* TMDS PLL optimization */ |
| 1432 | hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ |
| 1433 | hdmi_write(sd, 0x57, 0x74); /* TMDS PLL optimization */ |
| 1434 | hdmi_write(sd, 0x58, 0x63); /* TMDS PLL optimization */ |
| 1435 | hdmi_write(sd, 0x8d, 0x18); /* equaliser */ |
| 1436 | hdmi_write(sd, 0x8e, 0x34); /* equaliser */ |
| 1437 | hdmi_write(sd, 0x93, 0x88); /* equaliser */ |
| 1438 | hdmi_write(sd, 0x94, 0x2e); /* equaliser */ |
| 1439 | hdmi_write(sd, 0x96, 0x00); /* enable automatic EQ changing */ |
| 1440 | |
| 1441 | afe_write(sd, 0x00, 0x08); /* power up ADC */ |
| 1442 | afe_write(sd, 0x01, 0x06); /* power up Analog Front End */ |
| 1443 | afe_write(sd, 0xc8, 0x00); /* phase control */ |
| 1444 | |
| 1445 | /* set ADI recommended settings for digitizer */ |
| 1446 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ |
| 1447 | afe_write(sd, 0x12, 0x7b); /* ADC noise shaping filter controls */ |
| 1448 | afe_write(sd, 0x0c, 0x1f); /* CP core gain controls */ |
| 1449 | cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */ |
| 1450 | cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ |
| 1451 | cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ |
| 1452 | break; |
| 1453 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1454 | case ADV7604_MODE_HDMI: |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1455 | /* set ADI recommended settings for HDMI: */ |
| 1456 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ |
| 1457 | hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ |
| 1458 | hdmi_write(sd, 0x3d, 0x10); /* DDC bus active pull-up control */ |
| 1459 | hdmi_write(sd, 0x3e, 0x39); /* TMDS PLL optimization */ |
| 1460 | hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ |
| 1461 | hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */ |
| 1462 | hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */ |
| 1463 | hdmi_write(sd, 0x8d, 0x18); /* equaliser */ |
| 1464 | hdmi_write(sd, 0x8e, 0x34); /* equaliser */ |
| 1465 | hdmi_write(sd, 0x93, 0x8b); /* equaliser */ |
| 1466 | hdmi_write(sd, 0x94, 0x2d); /* equaliser */ |
| 1467 | hdmi_write(sd, 0x96, 0x01); /* enable automatic EQ changing */ |
| 1468 | |
| 1469 | afe_write(sd, 0x00, 0xff); /* power down ADC */ |
| 1470 | afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */ |
| 1471 | afe_write(sd, 0xc8, 0x40); /* phase control */ |
| 1472 | |
| 1473 | /* reset ADI recommended settings for digitizer */ |
| 1474 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ |
| 1475 | afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */ |
| 1476 | afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */ |
| 1477 | cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */ |
| 1478 | cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ |
| 1479 | cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */ |
| 1480 | |
| 1481 | break; |
| 1482 | default: |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1483 | v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", |
| 1484 | __func__, state->mode); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1485 | break; |
| 1486 | } |
| 1487 | } |
| 1488 | |
| 1489 | static int adv7604_s_routing(struct v4l2_subdev *sd, |
| 1490 | u32 input, u32 output, u32 config) |
| 1491 | { |
| 1492 | struct adv7604_state *state = to_state(sd); |
| 1493 | |
| 1494 | v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); |
| 1495 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1496 | state->mode = input; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1497 | |
| 1498 | disable_input(sd); |
| 1499 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1500 | select_input(sd); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1501 | |
Hans Verkuil | 6b0d5d3 | 2012-10-16 06:40:45 -0300 | [diff] [blame] | 1502 | enable_input(sd); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1503 | |
| 1504 | return 0; |
| 1505 | } |
| 1506 | |
| 1507 | static int adv7604_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, |
| 1508 | enum v4l2_mbus_pixelcode *code) |
| 1509 | { |
| 1510 | if (index) |
| 1511 | return -EINVAL; |
| 1512 | /* Good enough for now */ |
| 1513 | *code = V4L2_MBUS_FMT_FIXED; |
| 1514 | return 0; |
| 1515 | } |
| 1516 | |
| 1517 | static int adv7604_g_mbus_fmt(struct v4l2_subdev *sd, |
| 1518 | struct v4l2_mbus_framefmt *fmt) |
| 1519 | { |
| 1520 | struct adv7604_state *state = to_state(sd); |
| 1521 | |
| 1522 | fmt->width = state->timings.bt.width; |
| 1523 | fmt->height = state->timings.bt.height; |
| 1524 | fmt->code = V4L2_MBUS_FMT_FIXED; |
| 1525 | fmt->field = V4L2_FIELD_NONE; |
| 1526 | if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| 1527 | fmt->colorspace = (state->timings.bt.height <= 576) ? |
| 1528 | V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709; |
| 1529 | } |
| 1530 | return 0; |
| 1531 | } |
| 1532 | |
| 1533 | static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled) |
| 1534 | { |
| 1535 | struct adv7604_state *state = to_state(sd); |
| 1536 | u8 fmt_change, fmt_change_digital, tx_5v; |
| 1537 | |
| 1538 | /* format change */ |
| 1539 | fmt_change = io_read(sd, 0x43) & 0x98; |
| 1540 | if (fmt_change) |
| 1541 | io_write(sd, 0x44, fmt_change); |
| 1542 | fmt_change_digital = DIGITAL_INPUT ? (io_read(sd, 0x6b) & 0xc0) : 0; |
| 1543 | if (fmt_change_digital) |
| 1544 | io_write(sd, 0x6c, fmt_change_digital); |
| 1545 | if (fmt_change || fmt_change_digital) { |
| 1546 | v4l2_dbg(1, debug, sd, |
| 1547 | "%s: ADV7604_FMT_CHANGE, fmt_change = 0x%x, fmt_change_digital = 0x%x\n", |
| 1548 | __func__, fmt_change, fmt_change_digital); |
| 1549 | v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL); |
| 1550 | if (handled) |
| 1551 | *handled = true; |
| 1552 | } |
| 1553 | /* tx 5v detect */ |
| 1554 | tx_5v = io_read(sd, 0x70) & 0x10; |
| 1555 | if (tx_5v) { |
| 1556 | v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); |
| 1557 | io_write(sd, 0x71, tx_5v); |
| 1558 | adv7604_s_detect_tx_5v_ctrl(sd); |
| 1559 | if (handled) |
| 1560 | *handled = true; |
| 1561 | } |
| 1562 | return 0; |
| 1563 | } |
| 1564 | |
| 1565 | static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) |
| 1566 | { |
| 1567 | struct adv7604_state *state = to_state(sd); |
| 1568 | |
| 1569 | if (edid->pad != 0) |
| 1570 | return -EINVAL; |
| 1571 | if (edid->blocks == 0) |
| 1572 | return -EINVAL; |
| 1573 | if (edid->start_block >= state->edid_blocks) |
| 1574 | return -EINVAL; |
| 1575 | if (edid->start_block + edid->blocks > state->edid_blocks) |
| 1576 | edid->blocks = state->edid_blocks - edid->start_block; |
| 1577 | if (!edid->edid) |
| 1578 | return -EINVAL; |
| 1579 | memcpy(edid->edid + edid->start_block * 128, |
| 1580 | state->edid + edid->start_block * 128, |
| 1581 | edid->blocks * 128); |
| 1582 | return 0; |
| 1583 | } |
| 1584 | |
| 1585 | static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) |
| 1586 | { |
| 1587 | struct adv7604_state *state = to_state(sd); |
| 1588 | int err; |
| 1589 | |
| 1590 | if (edid->pad != 0) |
| 1591 | return -EINVAL; |
| 1592 | if (edid->start_block != 0) |
| 1593 | return -EINVAL; |
| 1594 | if (edid->blocks == 0) { |
| 1595 | /* Pull down the hotplug pin */ |
| 1596 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); |
| 1597 | /* Disables I2C access to internal EDID ram from DDC port */ |
| 1598 | rep_write_and_or(sd, 0x77, 0xf0, 0x0); |
| 1599 | state->edid_blocks = 0; |
| 1600 | /* Fall back to a 16:9 aspect ratio */ |
| 1601 | state->aspect_ratio.numerator = 16; |
| 1602 | state->aspect_ratio.denominator = 9; |
| 1603 | return 0; |
| 1604 | } |
| 1605 | if (edid->blocks > 2) |
| 1606 | return -E2BIG; |
| 1607 | if (!edid->edid) |
| 1608 | return -EINVAL; |
| 1609 | memcpy(state->edid, edid->edid, 128 * edid->blocks); |
| 1610 | state->edid_blocks = edid->blocks; |
| 1611 | state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15], |
| 1612 | edid->edid[0x16]); |
| 1613 | err = edid_write_block(sd, 128 * edid->blocks, state->edid); |
| 1614 | if (err < 0) |
| 1615 | v4l2_err(sd, "error %d writing edid\n", err); |
| 1616 | return err; |
| 1617 | } |
| 1618 | |
| 1619 | /*********** avi info frame CEA-861-E **************/ |
| 1620 | |
| 1621 | static void print_avi_infoframe(struct v4l2_subdev *sd) |
| 1622 | { |
| 1623 | int i; |
| 1624 | u8 buf[14]; |
| 1625 | u8 avi_len; |
| 1626 | u8 avi_ver; |
| 1627 | |
| 1628 | if (!(hdmi_read(sd, 0x05) & 0x80)) { |
| 1629 | v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n"); |
| 1630 | return; |
| 1631 | } |
| 1632 | if (!(io_read(sd, 0x60) & 0x01)) { |
| 1633 | v4l2_info(sd, "AVI infoframe not received\n"); |
| 1634 | return; |
| 1635 | } |
| 1636 | |
| 1637 | if (io_read(sd, 0x83) & 0x01) { |
| 1638 | v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n"); |
| 1639 | io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ |
| 1640 | if (io_read(sd, 0x83) & 0x01) { |
| 1641 | v4l2_info(sd, "AVI infoframe checksum error still present\n"); |
| 1642 | io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ |
| 1643 | } |
| 1644 | } |
| 1645 | |
| 1646 | avi_len = infoframe_read(sd, 0xe2); |
| 1647 | avi_ver = infoframe_read(sd, 0xe1); |
| 1648 | v4l2_info(sd, "AVI infoframe version %d (%d byte)\n", |
| 1649 | avi_ver, avi_len); |
| 1650 | |
| 1651 | if (avi_ver != 0x02) |
| 1652 | return; |
| 1653 | |
| 1654 | for (i = 0; i < 14; i++) |
| 1655 | buf[i] = infoframe_read(sd, i); |
| 1656 | |
| 1657 | v4l2_info(sd, |
| 1658 | "\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| 1659 | buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], |
| 1660 | buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]); |
| 1661 | } |
| 1662 | |
| 1663 | static int adv7604_log_status(struct v4l2_subdev *sd) |
| 1664 | { |
| 1665 | struct adv7604_state *state = to_state(sd); |
| 1666 | struct v4l2_dv_timings timings; |
| 1667 | struct stdi_readback stdi; |
| 1668 | u8 reg_io_0x02 = io_read(sd, 0x02); |
| 1669 | |
| 1670 | char *csc_coeff_sel_rb[16] = { |
| 1671 | "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB", |
| 1672 | "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709", |
| 1673 | "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709", |
| 1674 | "reserved", "reserved", "reserved", "reserved", "manual" |
| 1675 | }; |
| 1676 | char *input_color_space_txt[16] = { |
| 1677 | "RGB limited range (16-235)", "RGB full range (0-255)", |
| 1678 | "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)", |
| 1679 | "XvYCC Bt.601", "XvYCC Bt.709", |
| 1680 | "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)", |
| 1681 | "invalid", "invalid", "invalid", "invalid", "invalid", |
| 1682 | "invalid", "invalid", "automatic" |
| 1683 | }; |
| 1684 | char *rgb_quantization_range_txt[] = { |
| 1685 | "Automatic", |
| 1686 | "RGB limited range (16-235)", |
| 1687 | "RGB full range (0-255)", |
| 1688 | }; |
| 1689 | |
| 1690 | v4l2_info(sd, "-----Chip status-----\n"); |
| 1691 | v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on"); |
| 1692 | v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ? |
| 1693 | "HDMI" : (DIGITAL_INPUT ? "DVI-D" : "DVI-A")); |
| 1694 | v4l2_info(sd, "EDID: %s\n", ((rep_read(sd, 0x7d) & 0x01) && |
| 1695 | (rep_read(sd, 0x77) & 0x01)) ? "enabled" : "disabled "); |
| 1696 | v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ? |
| 1697 | "enabled" : "disabled"); |
| 1698 | |
| 1699 | v4l2_info(sd, "-----Signal status-----\n"); |
| 1700 | v4l2_info(sd, "Cable detected (+5V power): %s\n", |
| 1701 | (io_read(sd, 0x6f) & 0x10) ? "true" : "false"); |
| 1702 | v4l2_info(sd, "TMDS signal detected: %s\n", |
| 1703 | no_signal_tmds(sd) ? "false" : "true"); |
| 1704 | v4l2_info(sd, "TMDS signal locked: %s\n", |
| 1705 | no_lock_tmds(sd) ? "false" : "true"); |
| 1706 | v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true"); |
| 1707 | v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true"); |
| 1708 | v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); |
| 1709 | v4l2_info(sd, "CP free run: %s\n", |
| 1710 | (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); |
Hans Verkuil | ccbd5bc | 2012-10-16 10:02:05 -0300 | [diff] [blame] | 1711 | v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n", |
| 1712 | io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f, |
| 1713 | (io_read(sd, 0x01) & 0x70) >> 4); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1714 | |
| 1715 | v4l2_info(sd, "-----Video Timings-----\n"); |
| 1716 | if (read_stdi(sd, &stdi)) |
| 1717 | v4l2_info(sd, "STDI: not locked\n"); |
| 1718 | else |
| 1719 | v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n", |
| 1720 | stdi.lcf, stdi.bl, stdi.lcvs, |
| 1721 | stdi.interlaced ? "interlaced" : "progressive", |
| 1722 | stdi.hs_pol, stdi.vs_pol); |
| 1723 | if (adv7604_query_dv_timings(sd, &timings)) |
| 1724 | v4l2_info(sd, "No video detected\n"); |
| 1725 | else |
| 1726 | adv7604_print_timings(sd, &timings, "Detected format:", true); |
| 1727 | adv7604_print_timings(sd, &state->timings, "Configured format:", true); |
| 1728 | |
| 1729 | v4l2_info(sd, "-----Color space-----\n"); |
| 1730 | v4l2_info(sd, "RGB quantization range ctrl: %s\n", |
| 1731 | rgb_quantization_range_txt[state->rgb_quantization_range]); |
| 1732 | v4l2_info(sd, "Input color space: %s\n", |
| 1733 | input_color_space_txt[reg_io_0x02 >> 4]); |
| 1734 | v4l2_info(sd, "Output color space: %s %s, saturator %s\n", |
| 1735 | (reg_io_0x02 & 0x02) ? "RGB" : "YCbCr", |
| 1736 | (reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)", |
| 1737 | ((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ? |
| 1738 | "enabled" : "disabled"); |
| 1739 | v4l2_info(sd, "Color space conversion: %s\n", |
| 1740 | csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]); |
| 1741 | |
| 1742 | /* Digital video */ |
| 1743 | if (DIGITAL_INPUT) { |
| 1744 | v4l2_info(sd, "-----HDMI status-----\n"); |
| 1745 | v4l2_info(sd, "HDCP encrypted content: %s\n", |
| 1746 | hdmi_read(sd, 0x05) & 0x40 ? "true" : "false"); |
| 1747 | |
| 1748 | print_avi_infoframe(sd); |
| 1749 | } |
| 1750 | |
| 1751 | return 0; |
| 1752 | } |
| 1753 | |
| 1754 | /* ----------------------------------------------------------------------- */ |
| 1755 | |
| 1756 | static const struct v4l2_ctrl_ops adv7604_ctrl_ops = { |
| 1757 | .s_ctrl = adv7604_s_ctrl, |
| 1758 | }; |
| 1759 | |
| 1760 | static const struct v4l2_subdev_core_ops adv7604_core_ops = { |
| 1761 | .log_status = adv7604_log_status, |
| 1762 | .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, |
| 1763 | .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, |
| 1764 | .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, |
| 1765 | .g_ctrl = v4l2_subdev_g_ctrl, |
| 1766 | .s_ctrl = v4l2_subdev_s_ctrl, |
| 1767 | .queryctrl = v4l2_subdev_queryctrl, |
| 1768 | .querymenu = v4l2_subdev_querymenu, |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1769 | .interrupt_service_routine = adv7604_isr, |
| 1770 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 1771 | .g_register = adv7604_g_register, |
| 1772 | .s_register = adv7604_s_register, |
| 1773 | #endif |
| 1774 | }; |
| 1775 | |
| 1776 | static const struct v4l2_subdev_video_ops adv7604_video_ops = { |
| 1777 | .s_routing = adv7604_s_routing, |
| 1778 | .g_input_status = adv7604_g_input_status, |
| 1779 | .s_dv_timings = adv7604_s_dv_timings, |
| 1780 | .g_dv_timings = adv7604_g_dv_timings, |
| 1781 | .query_dv_timings = adv7604_query_dv_timings, |
| 1782 | .enum_dv_timings = adv7604_enum_dv_timings, |
| 1783 | .dv_timings_cap = adv7604_dv_timings_cap, |
| 1784 | .enum_mbus_fmt = adv7604_enum_mbus_fmt, |
| 1785 | .g_mbus_fmt = adv7604_g_mbus_fmt, |
| 1786 | .try_mbus_fmt = adv7604_g_mbus_fmt, |
| 1787 | .s_mbus_fmt = adv7604_g_mbus_fmt, |
| 1788 | }; |
| 1789 | |
| 1790 | static const struct v4l2_subdev_pad_ops adv7604_pad_ops = { |
| 1791 | .get_edid = adv7604_get_edid, |
| 1792 | .set_edid = adv7604_set_edid, |
| 1793 | }; |
| 1794 | |
| 1795 | static const struct v4l2_subdev_ops adv7604_ops = { |
| 1796 | .core = &adv7604_core_ops, |
| 1797 | .video = &adv7604_video_ops, |
| 1798 | .pad = &adv7604_pad_ops, |
| 1799 | }; |
| 1800 | |
| 1801 | /* -------------------------- custom ctrls ---------------------------------- */ |
| 1802 | |
| 1803 | static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = { |
| 1804 | .ops = &adv7604_ctrl_ops, |
| 1805 | .id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE, |
| 1806 | .name = "Analog Sampling Phase", |
| 1807 | .type = V4L2_CTRL_TYPE_INTEGER, |
| 1808 | .min = 0, |
| 1809 | .max = 0x1f, |
| 1810 | .step = 1, |
| 1811 | .def = 0, |
| 1812 | }; |
| 1813 | |
| 1814 | static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = { |
| 1815 | .ops = &adv7604_ctrl_ops, |
| 1816 | .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL, |
| 1817 | .name = "Free Running Color, Manual", |
| 1818 | .type = V4L2_CTRL_TYPE_BOOLEAN, |
| 1819 | .min = false, |
| 1820 | .max = true, |
| 1821 | .step = 1, |
| 1822 | .def = false, |
| 1823 | }; |
| 1824 | |
| 1825 | static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = { |
| 1826 | .ops = &adv7604_ctrl_ops, |
| 1827 | .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR, |
| 1828 | .name = "Free Running Color", |
| 1829 | .type = V4L2_CTRL_TYPE_INTEGER, |
| 1830 | .min = 0x0, |
| 1831 | .max = 0xffffff, |
| 1832 | .step = 0x1, |
| 1833 | .def = 0x0, |
| 1834 | }; |
| 1835 | |
| 1836 | /* ----------------------------------------------------------------------- */ |
| 1837 | |
| 1838 | static int adv7604_core_init(struct v4l2_subdev *sd) |
| 1839 | { |
| 1840 | struct adv7604_state *state = to_state(sd); |
| 1841 | struct adv7604_platform_data *pdata = &state->pdata; |
| 1842 | |
| 1843 | hdmi_write(sd, 0x48, |
| 1844 | (pdata->disable_pwrdnb ? 0x80 : 0) | |
| 1845 | (pdata->disable_cable_det_rst ? 0x40 : 0)); |
| 1846 | |
| 1847 | disable_input(sd); |
| 1848 | |
| 1849 | /* power */ |
| 1850 | io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ |
| 1851 | io_write(sd, 0x0b, 0x44); /* Power down ESDP block */ |
| 1852 | cp_write(sd, 0xcf, 0x01); /* Power down macrovision */ |
| 1853 | |
| 1854 | /* video format */ |
| 1855 | io_write_and_or(sd, 0x02, 0xf0, |
| 1856 | pdata->alt_gamma << 3 | |
| 1857 | pdata->op_656_range << 2 | |
| 1858 | pdata->rgb_out << 1 | |
| 1859 | pdata->alt_data_sat << 0); |
| 1860 | io_write(sd, 0x03, pdata->op_format_sel); |
| 1861 | io_write_and_or(sd, 0x04, 0x1f, pdata->op_ch_sel << 5); |
| 1862 | io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 | |
| 1863 | pdata->insert_av_codes << 2 | |
| 1864 | pdata->replicate_av_codes << 1 | |
| 1865 | pdata->invert_cbcr << 0); |
| 1866 | |
| 1867 | /* TODO from platform data */ |
| 1868 | cp_write(sd, 0x69, 0x30); /* Enable CP CSC */ |
| 1869 | io_write(sd, 0x06, 0xa6); /* positive VS and HS */ |
| 1870 | io_write(sd, 0x14, 0x7f); /* Drive strength adjusted to max */ |
| 1871 | cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ |
| 1872 | cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ |
| 1873 | cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - |
Hans Verkuil | 8093964 | 2012-10-16 05:46:21 -0300 | [diff] [blame] | 1874 | ADI recommended setting [REF_01, c. 2.3.3] */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1875 | cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - |
Hans Verkuil | 8093964 | 2012-10-16 05:46:21 -0300 | [diff] [blame] | 1876 | ADI recommended setting [REF_01, c. 2.3.3] */ |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1877 | cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution |
| 1878 | for digital formats */ |
| 1879 | |
| 1880 | /* TODO from platform data */ |
| 1881 | afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */ |
| 1882 | |
| 1883 | afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ |
| 1884 | io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); |
| 1885 | |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1886 | /* interrupts */ |
| 1887 | io_write(sd, 0x40, 0xc2); /* Configure INT1 */ |
| 1888 | io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ |
| 1889 | io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */ |
| 1890 | io_write(sd, 0x6e, 0xc0); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */ |
| 1891 | io_write(sd, 0x73, 0x10); /* Enable CABLE_DET_A_ST (+5v) interrupt */ |
| 1892 | |
| 1893 | return v4l2_ctrl_handler_setup(sd->ctrl_handler); |
| 1894 | } |
| 1895 | |
| 1896 | static void adv7604_unregister_clients(struct adv7604_state *state) |
| 1897 | { |
| 1898 | if (state->i2c_avlink) |
| 1899 | i2c_unregister_device(state->i2c_avlink); |
| 1900 | if (state->i2c_cec) |
| 1901 | i2c_unregister_device(state->i2c_cec); |
| 1902 | if (state->i2c_infoframe) |
| 1903 | i2c_unregister_device(state->i2c_infoframe); |
| 1904 | if (state->i2c_esdp) |
| 1905 | i2c_unregister_device(state->i2c_esdp); |
| 1906 | if (state->i2c_dpp) |
| 1907 | i2c_unregister_device(state->i2c_dpp); |
| 1908 | if (state->i2c_afe) |
| 1909 | i2c_unregister_device(state->i2c_afe); |
| 1910 | if (state->i2c_repeater) |
| 1911 | i2c_unregister_device(state->i2c_repeater); |
| 1912 | if (state->i2c_edid) |
| 1913 | i2c_unregister_device(state->i2c_edid); |
| 1914 | if (state->i2c_hdmi) |
| 1915 | i2c_unregister_device(state->i2c_hdmi); |
| 1916 | if (state->i2c_test) |
| 1917 | i2c_unregister_device(state->i2c_test); |
| 1918 | if (state->i2c_cp) |
| 1919 | i2c_unregister_device(state->i2c_cp); |
| 1920 | if (state->i2c_vdp) |
| 1921 | i2c_unregister_device(state->i2c_vdp); |
| 1922 | } |
| 1923 | |
| 1924 | static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd, |
| 1925 | u8 addr, u8 io_reg) |
| 1926 | { |
| 1927 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 1928 | |
| 1929 | if (addr) |
| 1930 | io_write(sd, io_reg, addr << 1); |
| 1931 | return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); |
| 1932 | } |
| 1933 | |
| 1934 | static int adv7604_probe(struct i2c_client *client, |
| 1935 | const struct i2c_device_id *id) |
| 1936 | { |
| 1937 | struct adv7604_state *state; |
| 1938 | struct adv7604_platform_data *pdata = client->dev.platform_data; |
| 1939 | struct v4l2_ctrl_handler *hdl; |
| 1940 | struct v4l2_subdev *sd; |
| 1941 | int err; |
| 1942 | |
| 1943 | /* Check if the adapter supports the needed features */ |
| 1944 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 1945 | return -EIO; |
| 1946 | v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n", |
| 1947 | client->addr << 1); |
| 1948 | |
Laurent Pinchart | c02b211 | 2013-05-02 08:29:43 -0300 | [diff] [blame] | 1949 | state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1950 | if (!state) { |
| 1951 | v4l_err(client, "Could not allocate adv7604_state memory!\n"); |
| 1952 | return -ENOMEM; |
| 1953 | } |
| 1954 | |
| 1955 | /* platform data */ |
| 1956 | if (!pdata) { |
| 1957 | v4l_err(client, "No platform data!\n"); |
Laurent Pinchart | c02b211 | 2013-05-02 08:29:43 -0300 | [diff] [blame] | 1958 | return -ENODEV; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1959 | } |
| 1960 | memcpy(&state->pdata, pdata, sizeof(state->pdata)); |
| 1961 | |
| 1962 | sd = &state->sd; |
| 1963 | v4l2_i2c_subdev_init(sd, client, &adv7604_ops); |
| 1964 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| 1965 | state->connector_hdmi = pdata->connector_hdmi; |
| 1966 | |
| 1967 | /* i2c access to adv7604? */ |
| 1968 | if (adv_smbus_read_byte_data_check(client, 0xfb, false) != 0x68) { |
| 1969 | v4l2_info(sd, "not an adv7604 on address 0x%x\n", |
| 1970 | client->addr << 1); |
Laurent Pinchart | c02b211 | 2013-05-02 08:29:43 -0300 | [diff] [blame] | 1971 | return -ENODEV; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 1972 | } |
| 1973 | |
| 1974 | /* control handlers */ |
| 1975 | hdl = &state->hdl; |
| 1976 | v4l2_ctrl_handler_init(hdl, 9); |
| 1977 | |
| 1978 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| 1979 | V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); |
| 1980 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| 1981 | V4L2_CID_CONTRAST, 0, 255, 1, 128); |
| 1982 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| 1983 | V4L2_CID_SATURATION, 0, 255, 1, 128); |
| 1984 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| 1985 | V4L2_CID_HUE, 0, 128, 1, 0); |
| 1986 | |
| 1987 | /* private controls */ |
| 1988 | state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| 1989 | V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); |
| 1990 | state->detect_tx_5v_ctrl->is_private = true; |
| 1991 | state->rgb_quantization_range_ctrl = |
| 1992 | v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops, |
| 1993 | V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, |
| 1994 | 0, V4L2_DV_RGB_RANGE_AUTO); |
| 1995 | state->rgb_quantization_range_ctrl->is_private = true; |
| 1996 | |
| 1997 | /* custom controls */ |
| 1998 | state->analog_sampling_phase_ctrl = |
| 1999 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL); |
| 2000 | state->analog_sampling_phase_ctrl->is_private = true; |
| 2001 | state->free_run_color_manual_ctrl = |
| 2002 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL); |
| 2003 | state->free_run_color_manual_ctrl->is_private = true; |
| 2004 | state->free_run_color_ctrl = |
| 2005 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL); |
| 2006 | state->free_run_color_ctrl->is_private = true; |
| 2007 | |
| 2008 | sd->ctrl_handler = hdl; |
| 2009 | if (hdl->error) { |
| 2010 | err = hdl->error; |
| 2011 | goto err_hdl; |
| 2012 | } |
| 2013 | if (adv7604_s_detect_tx_5v_ctrl(sd)) { |
| 2014 | err = -ENODEV; |
| 2015 | goto err_hdl; |
| 2016 | } |
| 2017 | |
| 2018 | state->i2c_avlink = adv7604_dummy_client(sd, pdata->i2c_avlink, 0xf3); |
| 2019 | state->i2c_cec = adv7604_dummy_client(sd, pdata->i2c_cec, 0xf4); |
| 2020 | state->i2c_infoframe = adv7604_dummy_client(sd, pdata->i2c_infoframe, 0xf5); |
| 2021 | state->i2c_esdp = adv7604_dummy_client(sd, pdata->i2c_esdp, 0xf6); |
| 2022 | state->i2c_dpp = adv7604_dummy_client(sd, pdata->i2c_dpp, 0xf7); |
| 2023 | state->i2c_afe = adv7604_dummy_client(sd, pdata->i2c_afe, 0xf8); |
| 2024 | state->i2c_repeater = adv7604_dummy_client(sd, pdata->i2c_repeater, 0xf9); |
| 2025 | state->i2c_edid = adv7604_dummy_client(sd, pdata->i2c_edid, 0xfa); |
| 2026 | state->i2c_hdmi = adv7604_dummy_client(sd, pdata->i2c_hdmi, 0xfb); |
| 2027 | state->i2c_test = adv7604_dummy_client(sd, pdata->i2c_test, 0xfc); |
| 2028 | state->i2c_cp = adv7604_dummy_client(sd, pdata->i2c_cp, 0xfd); |
| 2029 | state->i2c_vdp = adv7604_dummy_client(sd, pdata->i2c_vdp, 0xfe); |
| 2030 | if (!state->i2c_avlink || !state->i2c_cec || !state->i2c_infoframe || |
| 2031 | !state->i2c_esdp || !state->i2c_dpp || !state->i2c_afe || |
| 2032 | !state->i2c_repeater || !state->i2c_edid || !state->i2c_hdmi || |
| 2033 | !state->i2c_test || !state->i2c_cp || !state->i2c_vdp) { |
| 2034 | err = -ENOMEM; |
| 2035 | v4l2_err(sd, "failed to create all i2c clients\n"); |
| 2036 | goto err_i2c; |
| 2037 | } |
Hans Verkuil | cf9afb1 | 2012-10-16 10:12:55 -0300 | [diff] [blame] | 2038 | state->restart_stdi_once = true; |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 2039 | |
| 2040 | /* work queues */ |
| 2041 | state->work_queues = create_singlethread_workqueue(client->name); |
| 2042 | if (!state->work_queues) { |
| 2043 | v4l2_err(sd, "Could not create work queue\n"); |
| 2044 | err = -ENOMEM; |
| 2045 | goto err_i2c; |
| 2046 | } |
| 2047 | |
| 2048 | INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, |
| 2049 | adv7604_delayed_work_enable_hotplug); |
| 2050 | |
| 2051 | state->pad.flags = MEDIA_PAD_FL_SOURCE; |
| 2052 | err = media_entity_init(&sd->entity, 1, &state->pad, 0); |
| 2053 | if (err) |
| 2054 | goto err_work_queues; |
| 2055 | |
| 2056 | err = adv7604_core_init(sd); |
| 2057 | if (err) |
| 2058 | goto err_entity; |
| 2059 | v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, |
| 2060 | client->addr << 1, client->adapter->name); |
| 2061 | return 0; |
| 2062 | |
| 2063 | err_entity: |
| 2064 | media_entity_cleanup(&sd->entity); |
| 2065 | err_work_queues: |
| 2066 | cancel_delayed_work(&state->delayed_work_enable_hotplug); |
| 2067 | destroy_workqueue(state->work_queues); |
| 2068 | err_i2c: |
| 2069 | adv7604_unregister_clients(state); |
| 2070 | err_hdl: |
| 2071 | v4l2_ctrl_handler_free(hdl); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 2072 | return err; |
| 2073 | } |
| 2074 | |
| 2075 | /* ----------------------------------------------------------------------- */ |
| 2076 | |
| 2077 | static int adv7604_remove(struct i2c_client *client) |
| 2078 | { |
| 2079 | struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| 2080 | struct adv7604_state *state = to_state(sd); |
| 2081 | |
| 2082 | cancel_delayed_work(&state->delayed_work_enable_hotplug); |
| 2083 | destroy_workqueue(state->work_queues); |
| 2084 | v4l2_device_unregister_subdev(sd); |
| 2085 | media_entity_cleanup(&sd->entity); |
| 2086 | adv7604_unregister_clients(to_state(sd)); |
| 2087 | v4l2_ctrl_handler_free(sd->ctrl_handler); |
Hans Verkuil | 54450f5 | 2012-07-18 05:45:16 -0300 | [diff] [blame] | 2088 | return 0; |
| 2089 | } |
| 2090 | |
| 2091 | /* ----------------------------------------------------------------------- */ |
| 2092 | |
| 2093 | static struct i2c_device_id adv7604_id[] = { |
| 2094 | { "adv7604", 0 }, |
| 2095 | { } |
| 2096 | }; |
| 2097 | MODULE_DEVICE_TABLE(i2c, adv7604_id); |
| 2098 | |
| 2099 | static struct i2c_driver adv7604_driver = { |
| 2100 | .driver = { |
| 2101 | .owner = THIS_MODULE, |
| 2102 | .name = "adv7604", |
| 2103 | }, |
| 2104 | .probe = adv7604_probe, |
| 2105 | .remove = adv7604_remove, |
| 2106 | .id_table = adv7604_id, |
| 2107 | }; |
| 2108 | |
| 2109 | module_i2c_driver(adv7604_driver); |