Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1 | /* |
| 2 | w83791d.c - Part of lm_sensors, Linux kernel modules for hardware |
| 3 | monitoring |
| 4 | |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 5 | Copyright (C) 2006-2007 Charles Spirakis <bezaur@gmail.com> |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | /* |
| 23 | Supports following chips: |
| 24 | |
| 25 | Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 26 | w83791d 10 5 5 3 0x71 0x5ca3 yes no |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 27 | |
| 28 | The w83791d chip appears to be part way between the 83781d and the |
| 29 | 83792d. Thus, this file is derived from both the w83792d.c and |
Charles Spirakis | 125751cb | 2006-09-24 20:53:04 +0200 | [diff] [blame] | 30 | w83781d.c files. |
| 31 | |
| 32 | The w83791g chip is the same as the w83791d but lead-free. |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 33 | */ |
| 34 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 35 | #include <linux/module.h> |
| 36 | #include <linux/init.h> |
| 37 | #include <linux/slab.h> |
| 38 | #include <linux/i2c.h> |
| 39 | #include <linux/hwmon.h> |
| 40 | #include <linux/hwmon-vid.h> |
| 41 | #include <linux/hwmon-sysfs.h> |
| 42 | #include <linux/err.h> |
| 43 | #include <linux/mutex.h> |
| 44 | |
| 45 | #define NUMBER_OF_VIN 10 |
| 46 | #define NUMBER_OF_FANIN 5 |
| 47 | #define NUMBER_OF_TEMPIN 3 |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 48 | #define NUMBER_OF_PWM 5 |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 49 | |
| 50 | /* Addresses to scan */ |
Mark M. Hoffman | 25e9c86 | 2008-02-17 22:28:03 -0500 | [diff] [blame] | 51 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, |
| 52 | I2C_CLIENT_END }; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 53 | |
| 54 | /* Insmod parameters */ |
Jean Delvare | 3aed198 | 2009-01-07 16:37:32 +0100 | [diff] [blame] | 55 | |
| 56 | static unsigned short force_subclients[4]; |
| 57 | module_param_array(force_subclients, short, NULL, 0); |
| 58 | MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 59 | "{bus, clientaddr, subclientaddr1, subclientaddr2}"); |
| 60 | |
| 61 | static int reset; |
| 62 | module_param(reset, bool, 0); |
| 63 | MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset"); |
| 64 | |
| 65 | static int init; |
| 66 | module_param(init, bool, 0); |
| 67 | MODULE_PARM_DESC(init, "Set to one to force extra software initialization"); |
| 68 | |
| 69 | /* The W83791D registers */ |
| 70 | static const u8 W83791D_REG_IN[NUMBER_OF_VIN] = { |
| 71 | 0x20, /* VCOREA in DataSheet */ |
| 72 | 0x21, /* VINR0 in DataSheet */ |
| 73 | 0x22, /* +3.3VIN in DataSheet */ |
| 74 | 0x23, /* VDD5V in DataSheet */ |
| 75 | 0x24, /* +12VIN in DataSheet */ |
| 76 | 0x25, /* -12VIN in DataSheet */ |
| 77 | 0x26, /* -5VIN in DataSheet */ |
| 78 | 0xB0, /* 5VSB in DataSheet */ |
| 79 | 0xB1, /* VBAT in DataSheet */ |
| 80 | 0xB2 /* VINR1 in DataSheet */ |
| 81 | }; |
| 82 | |
| 83 | static const u8 W83791D_REG_IN_MAX[NUMBER_OF_VIN] = { |
| 84 | 0x2B, /* VCOREA High Limit in DataSheet */ |
| 85 | 0x2D, /* VINR0 High Limit in DataSheet */ |
| 86 | 0x2F, /* +3.3VIN High Limit in DataSheet */ |
| 87 | 0x31, /* VDD5V High Limit in DataSheet */ |
| 88 | 0x33, /* +12VIN High Limit in DataSheet */ |
| 89 | 0x35, /* -12VIN High Limit in DataSheet */ |
| 90 | 0x37, /* -5VIN High Limit in DataSheet */ |
| 91 | 0xB4, /* 5VSB High Limit in DataSheet */ |
| 92 | 0xB6, /* VBAT High Limit in DataSheet */ |
| 93 | 0xB8 /* VINR1 High Limit in DataSheet */ |
| 94 | }; |
| 95 | static const u8 W83791D_REG_IN_MIN[NUMBER_OF_VIN] = { |
| 96 | 0x2C, /* VCOREA Low Limit in DataSheet */ |
| 97 | 0x2E, /* VINR0 Low Limit in DataSheet */ |
| 98 | 0x30, /* +3.3VIN Low Limit in DataSheet */ |
| 99 | 0x32, /* VDD5V Low Limit in DataSheet */ |
| 100 | 0x34, /* +12VIN Low Limit in DataSheet */ |
| 101 | 0x36, /* -12VIN Low Limit in DataSheet */ |
| 102 | 0x38, /* -5VIN Low Limit in DataSheet */ |
| 103 | 0xB5, /* 5VSB Low Limit in DataSheet */ |
| 104 | 0xB7, /* VBAT Low Limit in DataSheet */ |
| 105 | 0xB9 /* VINR1 Low Limit in DataSheet */ |
| 106 | }; |
| 107 | static const u8 W83791D_REG_FAN[NUMBER_OF_FANIN] = { |
| 108 | 0x28, /* FAN 1 Count in DataSheet */ |
| 109 | 0x29, /* FAN 2 Count in DataSheet */ |
| 110 | 0x2A, /* FAN 3 Count in DataSheet */ |
| 111 | 0xBA, /* FAN 4 Count in DataSheet */ |
| 112 | 0xBB, /* FAN 5 Count in DataSheet */ |
| 113 | }; |
| 114 | static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = { |
| 115 | 0x3B, /* FAN 1 Count Low Limit in DataSheet */ |
| 116 | 0x3C, /* FAN 2 Count Low Limit in DataSheet */ |
| 117 | 0x3D, /* FAN 3 Count Low Limit in DataSheet */ |
| 118 | 0xBC, /* FAN 4 Count Low Limit in DataSheet */ |
| 119 | 0xBD, /* FAN 5 Count Low Limit in DataSheet */ |
| 120 | }; |
| 121 | |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 122 | static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = { |
| 123 | 0x81, /* PWM 1 duty cycle register in DataSheet */ |
| 124 | 0x83, /* PWM 2 duty cycle register in DataSheet */ |
| 125 | 0x94, /* PWM 3 duty cycle register in DataSheet */ |
| 126 | 0xA0, /* PWM 4 duty cycle register in DataSheet */ |
| 127 | 0xA1, /* PWM 5 duty cycle register in DataSheet */ |
| 128 | }; |
| 129 | |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 130 | static const u8 W83791D_REG_TEMP_TARGET[3] = { |
| 131 | 0x85, /* PWM 1 target temperature for temp 1 */ |
| 132 | 0x86, /* PWM 2 target temperature for temp 2 */ |
| 133 | 0x96, /* PWM 3 target temperature for temp 3 */ |
| 134 | }; |
| 135 | |
| 136 | static const u8 W83791D_REG_TEMP_TOL[2] = { |
| 137 | 0x87, /* PWM 1/2 temperature tolerance */ |
| 138 | 0x97, /* PWM 3 temperature tolerance */ |
| 139 | }; |
| 140 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 141 | static const u8 W83791D_REG_FAN_CFG[2] = { |
| 142 | 0x84, /* FAN 1/2 configuration */ |
| 143 | 0x95, /* FAN 3 configuration */ |
| 144 | }; |
| 145 | |
| 146 | static const u8 W83791D_REG_FAN_DIV[3] = { |
| 147 | 0x47, /* contains FAN1 and FAN2 Divisor */ |
| 148 | 0x4b, /* contains FAN3 Divisor */ |
| 149 | 0x5C, /* contains FAN4 and FAN5 Divisor */ |
| 150 | }; |
| 151 | |
| 152 | #define W83791D_REG_BANK 0x4E |
| 153 | #define W83791D_REG_TEMP2_CONFIG 0xC2 |
| 154 | #define W83791D_REG_TEMP3_CONFIG 0xCA |
| 155 | |
| 156 | static const u8 W83791D_REG_TEMP1[3] = { |
| 157 | 0x27, /* TEMP 1 in DataSheet */ |
| 158 | 0x39, /* TEMP 1 Over in DataSheet */ |
| 159 | 0x3A, /* TEMP 1 Hyst in DataSheet */ |
| 160 | }; |
| 161 | |
| 162 | static const u8 W83791D_REG_TEMP_ADD[2][6] = { |
| 163 | {0xC0, /* TEMP 2 in DataSheet */ |
| 164 | 0xC1, /* TEMP 2(0.5 deg) in DataSheet */ |
| 165 | 0xC5, /* TEMP 2 Over High part in DataSheet */ |
| 166 | 0xC6, /* TEMP 2 Over Low part in DataSheet */ |
| 167 | 0xC3, /* TEMP 2 Thyst High part in DataSheet */ |
| 168 | 0xC4}, /* TEMP 2 Thyst Low part in DataSheet */ |
| 169 | {0xC8, /* TEMP 3 in DataSheet */ |
| 170 | 0xC9, /* TEMP 3(0.5 deg) in DataSheet */ |
| 171 | 0xCD, /* TEMP 3 Over High part in DataSheet */ |
| 172 | 0xCE, /* TEMP 3 Over Low part in DataSheet */ |
| 173 | 0xCB, /* TEMP 3 Thyst High part in DataSheet */ |
| 174 | 0xCC} /* TEMP 3 Thyst Low part in DataSheet */ |
| 175 | }; |
| 176 | |
| 177 | #define W83791D_REG_BEEP_CONFIG 0x4D |
| 178 | |
| 179 | static const u8 W83791D_REG_BEEP_CTRL[3] = { |
| 180 | 0x56, /* BEEP Control Register 1 */ |
| 181 | 0x57, /* BEEP Control Register 2 */ |
| 182 | 0xA3, /* BEEP Control Register 3 */ |
| 183 | }; |
| 184 | |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 185 | #define W83791D_REG_GPIO 0x15 |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 186 | #define W83791D_REG_CONFIG 0x40 |
| 187 | #define W83791D_REG_VID_FANDIV 0x47 |
| 188 | #define W83791D_REG_DID_VID4 0x49 |
| 189 | #define W83791D_REG_WCHIPID 0x58 |
| 190 | #define W83791D_REG_CHIPMAN 0x4F |
| 191 | #define W83791D_REG_PIN 0x4B |
| 192 | #define W83791D_REG_I2C_SUBADDR 0x4A |
| 193 | |
| 194 | #define W83791D_REG_ALARM1 0xA9 /* realtime status register1 */ |
| 195 | #define W83791D_REG_ALARM2 0xAA /* realtime status register2 */ |
| 196 | #define W83791D_REG_ALARM3 0xAB /* realtime status register3 */ |
| 197 | |
| 198 | #define W83791D_REG_VBAT 0x5D |
| 199 | #define W83791D_REG_I2C_ADDR 0x48 |
| 200 | |
| 201 | /* The SMBus locks itself. The Winbond W83791D has a bank select register |
| 202 | (index 0x4e), but the driver only accesses registers in bank 0. Since |
| 203 | we don't switch banks, we don't need any special code to handle |
| 204 | locking access between bank switches */ |
| 205 | static inline int w83791d_read(struct i2c_client *client, u8 reg) |
| 206 | { |
| 207 | return i2c_smbus_read_byte_data(client, reg); |
| 208 | } |
| 209 | |
| 210 | static inline int w83791d_write(struct i2c_client *client, u8 reg, u8 value) |
| 211 | { |
| 212 | return i2c_smbus_write_byte_data(client, reg, value); |
| 213 | } |
| 214 | |
| 215 | /* The analog voltage inputs have 16mV LSB. Since the sysfs output is |
| 216 | in mV as would be measured on the chip input pin, need to just |
| 217 | multiply/divide by 16 to translate from/to register values. */ |
| 218 | #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8) / 16), 0, 255)) |
| 219 | #define IN_FROM_REG(val) ((val) * 16) |
| 220 | |
| 221 | static u8 fan_to_reg(long rpm, int div) |
| 222 | { |
| 223 | if (rpm == 0) |
| 224 | return 255; |
| 225 | rpm = SENSORS_LIMIT(rpm, 1, 1000000); |
| 226 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); |
| 227 | } |
| 228 | |
| 229 | #define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ |
| 230 | ((val) == 255 ? 0 : \ |
| 231 | 1350000 / ((val) * (div)))) |
| 232 | |
| 233 | /* for temp1 which is 8-bit resolution, LSB = 1 degree Celsius */ |
| 234 | #define TEMP1_FROM_REG(val) ((val) * 1000) |
| 235 | #define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ |
| 236 | (val) >= 127000 ? 127 : \ |
| 237 | (val) < 0 ? ((val) - 500) / 1000 : \ |
| 238 | ((val) + 500) / 1000) |
| 239 | |
| 240 | /* for temp2 and temp3 which are 9-bit resolution, LSB = 0.5 degree Celsius |
| 241 | Assumes the top 8 bits are the integral amount and the bottom 8 bits |
| 242 | are the fractional amount. Since we only have 0.5 degree resolution, |
| 243 | the bottom 7 bits will always be zero */ |
| 244 | #define TEMP23_FROM_REG(val) ((val) / 128 * 500) |
| 245 | #define TEMP23_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ |
| 246 | (val) >= 127500 ? 0x7F80 : \ |
| 247 | (val) < 0 ? ((val) - 250) / 500 * 128 : \ |
| 248 | ((val) + 250) / 500 * 128) |
| 249 | |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 250 | /* for thermal cruise target temp, 7-bits, LSB = 1 degree Celsius */ |
| 251 | #define TARGET_TEMP_TO_REG(val) ((val) < 0 ? 0 : \ |
| 252 | (val) >= 127000 ? 127 : \ |
| 253 | ((val) + 500) / 1000) |
| 254 | |
| 255 | /* for thermal cruise temp tolerance, 4-bits, LSB = 1 degree Celsius */ |
| 256 | #define TOL_TEMP_TO_REG(val) ((val) < 0 ? 0 : \ |
| 257 | (val) >= 15000 ? 15 : \ |
| 258 | ((val) + 500) / 1000) |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 259 | |
| 260 | #define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) |
| 261 | #define BEEP_MASK_FROM_REG(val) ((val) & 0xffffff) |
| 262 | |
| 263 | #define DIV_FROM_REG(val) (1 << (val)) |
| 264 | |
| 265 | static u8 div_to_reg(int nr, long val) |
| 266 | { |
| 267 | int i; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 268 | |
Marc Hulsman | ad02ad8 | 2008-08-06 22:41:04 +0200 | [diff] [blame] | 269 | /* fan divisors max out at 128 */ |
| 270 | val = SENSORS_LIMIT(val, 1, 128) >> 1; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 271 | for (i = 0; i < 7; i++) { |
| 272 | if (val == 0) |
| 273 | break; |
| 274 | val >>= 1; |
| 275 | } |
| 276 | return (u8) i; |
| 277 | } |
| 278 | |
| 279 | struct w83791d_data { |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 280 | struct device *hwmon_dev; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 281 | struct mutex update_lock; |
| 282 | |
| 283 | char valid; /* !=0 if following fields are valid */ |
| 284 | unsigned long last_updated; /* In jiffies */ |
| 285 | |
| 286 | /* array of 2 pointers to subclients */ |
| 287 | struct i2c_client *lm75[2]; |
| 288 | |
| 289 | /* volts */ |
| 290 | u8 in[NUMBER_OF_VIN]; /* Register value */ |
| 291 | u8 in_max[NUMBER_OF_VIN]; /* Register value */ |
| 292 | u8 in_min[NUMBER_OF_VIN]; /* Register value */ |
| 293 | |
| 294 | /* fans */ |
| 295 | u8 fan[NUMBER_OF_FANIN]; /* Register value */ |
| 296 | u8 fan_min[NUMBER_OF_FANIN]; /* Register value */ |
| 297 | u8 fan_div[NUMBER_OF_FANIN]; /* Register encoding, shifted right */ |
| 298 | |
| 299 | /* Temperature sensors */ |
| 300 | |
| 301 | s8 temp1[3]; /* current, over, thyst */ |
| 302 | s16 temp_add[2][3]; /* fixed point value. Top 8 bits are the |
| 303 | integral part, bottom 8 bits are the |
| 304 | fractional part. We only use the top |
| 305 | 9 bits as the resolution is only |
| 306 | to the 0.5 degree C... |
| 307 | two sensors with three values |
| 308 | (cur, over, hyst) */ |
| 309 | |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 310 | /* PWMs */ |
| 311 | u8 pwm[5]; /* pwm duty cycle */ |
Marc Hulsman | b5938f8 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 312 | u8 pwm_enable[3]; /* pwm enable status for fan 1-3 |
| 313 | (fan 4-5 only support manual mode) */ |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 314 | |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 315 | u8 temp_target[3]; /* pwm 1-3 target temperature */ |
| 316 | u8 temp_tolerance[3]; /* pwm 1-3 temperature tolerance */ |
| 317 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 318 | /* Misc */ |
| 319 | u32 alarms; /* realtime status register encoding,combined */ |
| 320 | u8 beep_enable; /* Global beep enable */ |
| 321 | u32 beep_mask; /* Mask off specific beeps */ |
| 322 | u8 vid; /* Register encoding, combined */ |
| 323 | u8 vrm; /* hwmon-vid */ |
| 324 | }; |
| 325 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 326 | static int w83791d_probe(struct i2c_client *client, |
| 327 | const struct i2c_device_id *id); |
Jean Delvare | 310ec79 | 2009-12-14 21:17:23 +0100 | [diff] [blame] | 328 | static int w83791d_detect(struct i2c_client *client, |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 329 | struct i2c_board_info *info); |
| 330 | static int w83791d_remove(struct i2c_client *client); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 331 | |
| 332 | static int w83791d_read(struct i2c_client *client, u8 register); |
| 333 | static int w83791d_write(struct i2c_client *client, u8 register, u8 value); |
| 334 | static struct w83791d_data *w83791d_update_device(struct device *dev); |
| 335 | |
| 336 | #ifdef DEBUG |
| 337 | static void w83791d_print_debug(struct w83791d_data *data, struct device *dev); |
| 338 | #endif |
| 339 | |
| 340 | static void w83791d_init_client(struct i2c_client *client); |
| 341 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 342 | static const struct i2c_device_id w83791d_id[] = { |
Jean Delvare | 1f86df4 | 2009-12-14 21:17:26 +0100 | [diff] [blame] | 343 | { "w83791d", 0 }, |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 344 | { } |
| 345 | }; |
| 346 | MODULE_DEVICE_TABLE(i2c, w83791d_id); |
| 347 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 348 | static struct i2c_driver w83791d_driver = { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 349 | .class = I2C_CLASS_HWMON, |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 350 | .driver = { |
| 351 | .name = "w83791d", |
| 352 | }, |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 353 | .probe = w83791d_probe, |
| 354 | .remove = w83791d_remove, |
| 355 | .id_table = w83791d_id, |
| 356 | .detect = w83791d_detect, |
Jean Delvare | c3813d6 | 2009-12-14 21:17:25 +0100 | [diff] [blame] | 357 | .address_list = normal_i2c, |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 358 | }; |
| 359 | |
| 360 | /* following are the sysfs callback functions */ |
| 361 | #define show_in_reg(reg) \ |
| 362 | static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ |
| 363 | char *buf) \ |
| 364 | { \ |
| 365 | struct sensor_device_attribute *sensor_attr = \ |
| 366 | to_sensor_dev_attr(attr); \ |
| 367 | struct w83791d_data *data = w83791d_update_device(dev); \ |
| 368 | int nr = sensor_attr->index; \ |
| 369 | return sprintf(buf,"%d\n", IN_FROM_REG(data->reg[nr])); \ |
| 370 | } |
| 371 | |
| 372 | show_in_reg(in); |
| 373 | show_in_reg(in_min); |
| 374 | show_in_reg(in_max); |
| 375 | |
| 376 | #define store_in_reg(REG, reg) \ |
| 377 | static ssize_t store_in_##reg(struct device *dev, \ |
| 378 | struct device_attribute *attr, \ |
| 379 | const char *buf, size_t count) \ |
| 380 | { \ |
| 381 | struct sensor_device_attribute *sensor_attr = \ |
| 382 | to_sensor_dev_attr(attr); \ |
| 383 | struct i2c_client *client = to_i2c_client(dev); \ |
| 384 | struct w83791d_data *data = i2c_get_clientdata(client); \ |
| 385 | unsigned long val = simple_strtoul(buf, NULL, 10); \ |
| 386 | int nr = sensor_attr->index; \ |
| 387 | \ |
| 388 | mutex_lock(&data->update_lock); \ |
| 389 | data->in_##reg[nr] = IN_TO_REG(val); \ |
| 390 | w83791d_write(client, W83791D_REG_IN_##REG[nr], data->in_##reg[nr]); \ |
| 391 | mutex_unlock(&data->update_lock); \ |
| 392 | \ |
| 393 | return count; \ |
| 394 | } |
| 395 | store_in_reg(MIN, min); |
| 396 | store_in_reg(MAX, max); |
| 397 | |
| 398 | static struct sensor_device_attribute sda_in_input[] = { |
| 399 | SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), |
| 400 | SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), |
| 401 | SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), |
| 402 | SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), |
| 403 | SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), |
| 404 | SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), |
| 405 | SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), |
| 406 | SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), |
| 407 | SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), |
| 408 | SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9), |
| 409 | }; |
| 410 | |
| 411 | static struct sensor_device_attribute sda_in_min[] = { |
| 412 | SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), |
| 413 | SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), |
| 414 | SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), |
| 415 | SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), |
| 416 | SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), |
| 417 | SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), |
| 418 | SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), |
| 419 | SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), |
| 420 | SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), |
| 421 | SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9), |
| 422 | }; |
| 423 | |
| 424 | static struct sensor_device_attribute sda_in_max[] = { |
| 425 | SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), |
| 426 | SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), |
| 427 | SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), |
| 428 | SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), |
| 429 | SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), |
| 430 | SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), |
| 431 | SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), |
| 432 | SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), |
| 433 | SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), |
| 434 | SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), |
| 435 | }; |
| 436 | |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 437 | |
| 438 | static ssize_t show_beep(struct device *dev, struct device_attribute *attr, |
| 439 | char *buf) |
| 440 | { |
| 441 | struct sensor_device_attribute *sensor_attr = |
| 442 | to_sensor_dev_attr(attr); |
| 443 | struct w83791d_data *data = w83791d_update_device(dev); |
| 444 | int bitnr = sensor_attr->index; |
| 445 | |
| 446 | return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); |
| 447 | } |
| 448 | |
| 449 | static ssize_t store_beep(struct device *dev, struct device_attribute *attr, |
| 450 | const char *buf, size_t count) |
| 451 | { |
| 452 | struct sensor_device_attribute *sensor_attr = |
| 453 | to_sensor_dev_attr(attr); |
| 454 | struct i2c_client *client = to_i2c_client(dev); |
| 455 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 456 | int bitnr = sensor_attr->index; |
| 457 | int bytenr = bitnr / 8; |
| 458 | long val = simple_strtol(buf, NULL, 10) ? 1 : 0; |
| 459 | |
| 460 | mutex_lock(&data->update_lock); |
| 461 | |
| 462 | data->beep_mask &= ~(0xff << (bytenr * 8)); |
| 463 | data->beep_mask |= w83791d_read(client, W83791D_REG_BEEP_CTRL[bytenr]) |
| 464 | << (bytenr * 8); |
| 465 | |
| 466 | data->beep_mask &= ~(1 << bitnr); |
| 467 | data->beep_mask |= val << bitnr; |
| 468 | |
| 469 | w83791d_write(client, W83791D_REG_BEEP_CTRL[bytenr], |
| 470 | (data->beep_mask >> (bytenr * 8)) & 0xff); |
| 471 | |
| 472 | mutex_unlock(&data->update_lock); |
| 473 | |
| 474 | return count; |
| 475 | } |
| 476 | |
| 477 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
| 478 | char *buf) |
| 479 | { |
| 480 | struct sensor_device_attribute *sensor_attr = |
| 481 | to_sensor_dev_attr(attr); |
| 482 | struct w83791d_data *data = w83791d_update_device(dev); |
| 483 | int bitnr = sensor_attr->index; |
| 484 | |
| 485 | return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); |
| 486 | } |
| 487 | |
| 488 | /* Note: The bitmask for the beep enable/disable is different than |
| 489 | the bitmask for the alarm. */ |
| 490 | static struct sensor_device_attribute sda_in_beep[] = { |
| 491 | SENSOR_ATTR(in0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 0), |
| 492 | SENSOR_ATTR(in1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 13), |
| 493 | SENSOR_ATTR(in2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 2), |
| 494 | SENSOR_ATTR(in3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 3), |
| 495 | SENSOR_ATTR(in4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 8), |
| 496 | SENSOR_ATTR(in5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 9), |
| 497 | SENSOR_ATTR(in6_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 10), |
| 498 | SENSOR_ATTR(in7_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 16), |
| 499 | SENSOR_ATTR(in8_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 17), |
| 500 | SENSOR_ATTR(in9_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 14), |
| 501 | }; |
| 502 | |
| 503 | static struct sensor_device_attribute sda_in_alarm[] = { |
| 504 | SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0), |
| 505 | SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1), |
| 506 | SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2), |
| 507 | SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3), |
| 508 | SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8), |
| 509 | SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9), |
| 510 | SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10), |
| 511 | SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19), |
| 512 | SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20), |
| 513 | SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 14), |
| 514 | }; |
| 515 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 516 | #define show_fan_reg(reg) \ |
| 517 | static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ |
| 518 | char *buf) \ |
| 519 | { \ |
| 520 | struct sensor_device_attribute *sensor_attr = \ |
| 521 | to_sensor_dev_attr(attr); \ |
| 522 | struct w83791d_data *data = w83791d_update_device(dev); \ |
| 523 | int nr = sensor_attr->index; \ |
| 524 | return sprintf(buf,"%d\n", \ |
| 525 | FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \ |
| 526 | } |
| 527 | |
| 528 | show_fan_reg(fan); |
| 529 | show_fan_reg(fan_min); |
| 530 | |
| 531 | static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, |
| 532 | const char *buf, size_t count) |
| 533 | { |
| 534 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 535 | struct i2c_client *client = to_i2c_client(dev); |
| 536 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 537 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 538 | int nr = sensor_attr->index; |
| 539 | |
| 540 | mutex_lock(&data->update_lock); |
| 541 | data->fan_min[nr] = fan_to_reg(val, DIV_FROM_REG(data->fan_div[nr])); |
| 542 | w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); |
| 543 | mutex_unlock(&data->update_lock); |
| 544 | |
| 545 | return count; |
| 546 | } |
| 547 | |
| 548 | static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, |
| 549 | char *buf) |
| 550 | { |
| 551 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 552 | int nr = sensor_attr->index; |
| 553 | struct w83791d_data *data = w83791d_update_device(dev); |
| 554 | return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr])); |
| 555 | } |
| 556 | |
| 557 | /* Note: we save and restore the fan minimum here, because its value is |
| 558 | determined in part by the fan divisor. This follows the principle of |
| 559 | least suprise; the user doesn't expect the fan minimum to change just |
| 560 | because the divisor changed. */ |
| 561 | static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, |
| 562 | const char *buf, size_t count) |
| 563 | { |
| 564 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 565 | struct i2c_client *client = to_i2c_client(dev); |
| 566 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 567 | int nr = sensor_attr->index; |
| 568 | unsigned long min; |
| 569 | u8 tmp_fan_div; |
| 570 | u8 fan_div_reg; |
Marc Hulsman | ad02ad8 | 2008-08-06 22:41:04 +0200 | [diff] [blame] | 571 | u8 vbat_reg; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 572 | int indx = 0; |
| 573 | u8 keep_mask = 0; |
| 574 | u8 new_shift = 0; |
| 575 | |
| 576 | /* Save fan_min */ |
| 577 | min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); |
| 578 | |
| 579 | mutex_lock(&data->update_lock); |
| 580 | data->fan_div[nr] = div_to_reg(nr, simple_strtoul(buf, NULL, 10)); |
| 581 | |
| 582 | switch (nr) { |
| 583 | case 0: |
| 584 | indx = 0; |
| 585 | keep_mask = 0xcf; |
| 586 | new_shift = 4; |
| 587 | break; |
| 588 | case 1: |
| 589 | indx = 0; |
| 590 | keep_mask = 0x3f; |
| 591 | new_shift = 6; |
| 592 | break; |
| 593 | case 2: |
| 594 | indx = 1; |
| 595 | keep_mask = 0x3f; |
| 596 | new_shift = 6; |
| 597 | break; |
| 598 | case 3: |
| 599 | indx = 2; |
| 600 | keep_mask = 0xf8; |
| 601 | new_shift = 0; |
| 602 | break; |
| 603 | case 4: |
| 604 | indx = 2; |
| 605 | keep_mask = 0x8f; |
| 606 | new_shift = 4; |
| 607 | break; |
| 608 | #ifdef DEBUG |
| 609 | default: |
| 610 | dev_warn(dev, "store_fan_div: Unexpected nr seen: %d\n", nr); |
| 611 | count = -EINVAL; |
| 612 | goto err_exit; |
| 613 | #endif |
| 614 | } |
| 615 | |
| 616 | fan_div_reg = w83791d_read(client, W83791D_REG_FAN_DIV[indx]) |
| 617 | & keep_mask; |
| 618 | tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask; |
| 619 | |
| 620 | w83791d_write(client, W83791D_REG_FAN_DIV[indx], |
| 621 | fan_div_reg | tmp_fan_div); |
| 622 | |
Marc Hulsman | ad02ad8 | 2008-08-06 22:41:04 +0200 | [diff] [blame] | 623 | /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ |
| 624 | if (nr < 3) { |
| 625 | keep_mask = ~(1 << (nr + 5)); |
| 626 | vbat_reg = w83791d_read(client, W83791D_REG_VBAT) |
| 627 | & keep_mask; |
| 628 | tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; |
| 629 | w83791d_write(client, W83791D_REG_VBAT, |
| 630 | vbat_reg | tmp_fan_div); |
| 631 | } |
| 632 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 633 | /* Restore fan_min */ |
| 634 | data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); |
| 635 | w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); |
| 636 | |
| 637 | #ifdef DEBUG |
| 638 | err_exit: |
| 639 | #endif |
| 640 | mutex_unlock(&data->update_lock); |
| 641 | |
| 642 | return count; |
| 643 | } |
| 644 | |
| 645 | static struct sensor_device_attribute sda_fan_input[] = { |
| 646 | SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), |
| 647 | SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), |
| 648 | SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), |
| 649 | SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), |
| 650 | SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4), |
| 651 | }; |
| 652 | |
| 653 | static struct sensor_device_attribute sda_fan_min[] = { |
| 654 | SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, |
| 655 | show_fan_min, store_fan_min, 0), |
| 656 | SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, |
| 657 | show_fan_min, store_fan_min, 1), |
| 658 | SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, |
| 659 | show_fan_min, store_fan_min, 2), |
| 660 | SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, |
| 661 | show_fan_min, store_fan_min, 3), |
| 662 | SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, |
| 663 | show_fan_min, store_fan_min, 4), |
| 664 | }; |
| 665 | |
| 666 | static struct sensor_device_attribute sda_fan_div[] = { |
| 667 | SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, |
| 668 | show_fan_div, store_fan_div, 0), |
| 669 | SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, |
| 670 | show_fan_div, store_fan_div, 1), |
| 671 | SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, |
| 672 | show_fan_div, store_fan_div, 2), |
| 673 | SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, |
| 674 | show_fan_div, store_fan_div, 3), |
| 675 | SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, |
| 676 | show_fan_div, store_fan_div, 4), |
| 677 | }; |
| 678 | |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 679 | static struct sensor_device_attribute sda_fan_beep[] = { |
| 680 | SENSOR_ATTR(fan1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 6), |
| 681 | SENSOR_ATTR(fan2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 7), |
| 682 | SENSOR_ATTR(fan3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 11), |
| 683 | SENSOR_ATTR(fan4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 21), |
| 684 | SENSOR_ATTR(fan5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 22), |
| 685 | }; |
| 686 | |
| 687 | static struct sensor_device_attribute sda_fan_alarm[] = { |
| 688 | SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6), |
| 689 | SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7), |
| 690 | SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11), |
| 691 | SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21), |
| 692 | SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22), |
| 693 | }; |
| 694 | |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 695 | /* read/write PWMs */ |
| 696 | static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, |
| 697 | char *buf) |
| 698 | { |
| 699 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 700 | int nr = sensor_attr->index; |
| 701 | struct w83791d_data *data = w83791d_update_device(dev); |
| 702 | return sprintf(buf, "%u\n", data->pwm[nr]); |
| 703 | } |
| 704 | |
| 705 | static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, |
| 706 | const char *buf, size_t count) |
| 707 | { |
| 708 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 709 | struct i2c_client *client = to_i2c_client(dev); |
| 710 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 711 | int nr = sensor_attr->index; |
| 712 | unsigned long val; |
| 713 | |
| 714 | if (strict_strtoul(buf, 10, &val)) |
| 715 | return -EINVAL; |
| 716 | |
| 717 | mutex_lock(&data->update_lock); |
| 718 | data->pwm[nr] = SENSORS_LIMIT(val, 0, 255); |
| 719 | w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]); |
| 720 | mutex_unlock(&data->update_lock); |
| 721 | return count; |
| 722 | } |
| 723 | |
| 724 | static struct sensor_device_attribute sda_pwm[] = { |
| 725 | SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, |
| 726 | show_pwm, store_pwm, 0), |
| 727 | SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, |
| 728 | show_pwm, store_pwm, 1), |
| 729 | SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, |
| 730 | show_pwm, store_pwm, 2), |
| 731 | SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, |
| 732 | show_pwm, store_pwm, 3), |
| 733 | SENSOR_ATTR(pwm5, S_IWUSR | S_IRUGO, |
| 734 | show_pwm, store_pwm, 4), |
| 735 | }; |
| 736 | |
Marc Hulsman | b5938f8 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 737 | static ssize_t show_pwmenable(struct device *dev, struct device_attribute *attr, |
| 738 | char *buf) |
| 739 | { |
| 740 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 741 | int nr = sensor_attr->index; |
| 742 | struct w83791d_data *data = w83791d_update_device(dev); |
| 743 | return sprintf(buf, "%u\n", data->pwm_enable[nr] + 1); |
| 744 | } |
| 745 | |
| 746 | static ssize_t store_pwmenable(struct device *dev, |
| 747 | struct device_attribute *attr, const char *buf, size_t count) |
| 748 | { |
| 749 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 750 | struct i2c_client *client = to_i2c_client(dev); |
| 751 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 752 | int nr = sensor_attr->index; |
| 753 | unsigned long val; |
| 754 | u8 reg_cfg_tmp; |
| 755 | u8 reg_idx = 0; |
| 756 | u8 val_shift = 0; |
| 757 | u8 keep_mask = 0; |
| 758 | |
| 759 | int ret = strict_strtoul(buf, 10, &val); |
| 760 | |
| 761 | if (ret || val < 1 || val > 3) |
| 762 | return -EINVAL; |
| 763 | |
| 764 | mutex_lock(&data->update_lock); |
| 765 | data->pwm_enable[nr] = val - 1; |
| 766 | switch (nr) { |
| 767 | case 0: |
| 768 | reg_idx = 0; |
| 769 | val_shift = 2; |
| 770 | keep_mask = 0xf3; |
| 771 | break; |
| 772 | case 1: |
| 773 | reg_idx = 0; |
| 774 | val_shift = 4; |
| 775 | keep_mask = 0xcf; |
| 776 | break; |
| 777 | case 2: |
| 778 | reg_idx = 1; |
| 779 | val_shift = 2; |
| 780 | keep_mask = 0xf3; |
| 781 | break; |
| 782 | } |
| 783 | |
| 784 | reg_cfg_tmp = w83791d_read(client, W83791D_REG_FAN_CFG[reg_idx]); |
| 785 | reg_cfg_tmp = (reg_cfg_tmp & keep_mask) | |
| 786 | data->pwm_enable[nr] << val_shift; |
| 787 | |
| 788 | w83791d_write(client, W83791D_REG_FAN_CFG[reg_idx], reg_cfg_tmp); |
| 789 | mutex_unlock(&data->update_lock); |
| 790 | |
| 791 | return count; |
| 792 | } |
| 793 | static struct sensor_device_attribute sda_pwmenable[] = { |
| 794 | SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, |
| 795 | show_pwmenable, store_pwmenable, 0), |
| 796 | SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, |
| 797 | show_pwmenable, store_pwmenable, 1), |
| 798 | SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, |
| 799 | show_pwmenable, store_pwmenable, 2), |
| 800 | }; |
| 801 | |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 802 | /* For Smart Fan I / Thermal Cruise */ |
| 803 | static ssize_t show_temp_target(struct device *dev, |
| 804 | struct device_attribute *attr, char *buf) |
| 805 | { |
| 806 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 807 | struct w83791d_data *data = w83791d_update_device(dev); |
| 808 | int nr = sensor_attr->index; |
| 809 | return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_target[nr])); |
| 810 | } |
| 811 | |
| 812 | static ssize_t store_temp_target(struct device *dev, |
| 813 | struct device_attribute *attr, const char *buf, size_t count) |
| 814 | { |
| 815 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 816 | struct i2c_client *client = to_i2c_client(dev); |
| 817 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 818 | int nr = sensor_attr->index; |
| 819 | unsigned long val; |
| 820 | u8 target_mask; |
| 821 | |
| 822 | if (strict_strtoul(buf, 10, &val)) |
| 823 | return -EINVAL; |
| 824 | |
| 825 | mutex_lock(&data->update_lock); |
| 826 | data->temp_target[nr] = TARGET_TEMP_TO_REG(val); |
| 827 | target_mask = w83791d_read(client, |
| 828 | W83791D_REG_TEMP_TARGET[nr]) & 0x80; |
| 829 | w83791d_write(client, W83791D_REG_TEMP_TARGET[nr], |
| 830 | data->temp_target[nr] | target_mask); |
| 831 | mutex_unlock(&data->update_lock); |
| 832 | return count; |
| 833 | } |
| 834 | |
| 835 | static struct sensor_device_attribute sda_temp_target[] = { |
| 836 | SENSOR_ATTR(temp1_target, S_IWUSR | S_IRUGO, |
| 837 | show_temp_target, store_temp_target, 0), |
| 838 | SENSOR_ATTR(temp2_target, S_IWUSR | S_IRUGO, |
| 839 | show_temp_target, store_temp_target, 1), |
| 840 | SENSOR_ATTR(temp3_target, S_IWUSR | S_IRUGO, |
| 841 | show_temp_target, store_temp_target, 2), |
| 842 | }; |
| 843 | |
| 844 | static ssize_t show_temp_tolerance(struct device *dev, |
| 845 | struct device_attribute *attr, char *buf) |
| 846 | { |
| 847 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 848 | struct w83791d_data *data = w83791d_update_device(dev); |
| 849 | int nr = sensor_attr->index; |
| 850 | return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_tolerance[nr])); |
| 851 | } |
| 852 | |
| 853 | static ssize_t store_temp_tolerance(struct device *dev, |
| 854 | struct device_attribute *attr, const char *buf, size_t count) |
| 855 | { |
| 856 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 857 | struct i2c_client *client = to_i2c_client(dev); |
| 858 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 859 | int nr = sensor_attr->index; |
| 860 | unsigned long val; |
| 861 | u8 target_mask; |
| 862 | u8 reg_idx = 0; |
| 863 | u8 val_shift = 0; |
| 864 | u8 keep_mask = 0; |
| 865 | |
| 866 | if (strict_strtoul(buf, 10, &val)) |
| 867 | return -EINVAL; |
| 868 | |
| 869 | switch (nr) { |
| 870 | case 0: |
| 871 | reg_idx = 0; |
| 872 | val_shift = 0; |
| 873 | keep_mask = 0xf0; |
| 874 | break; |
| 875 | case 1: |
| 876 | reg_idx = 0; |
| 877 | val_shift = 4; |
| 878 | keep_mask = 0x0f; |
| 879 | break; |
| 880 | case 2: |
| 881 | reg_idx = 1; |
| 882 | val_shift = 0; |
| 883 | keep_mask = 0xf0; |
| 884 | break; |
| 885 | } |
| 886 | |
| 887 | mutex_lock(&data->update_lock); |
| 888 | data->temp_tolerance[nr] = TOL_TEMP_TO_REG(val); |
| 889 | target_mask = w83791d_read(client, |
| 890 | W83791D_REG_TEMP_TOL[reg_idx]) & keep_mask; |
| 891 | w83791d_write(client, W83791D_REG_TEMP_TOL[reg_idx], |
| 892 | (data->temp_tolerance[nr] << val_shift) | target_mask); |
| 893 | mutex_unlock(&data->update_lock); |
| 894 | return count; |
| 895 | } |
| 896 | |
| 897 | static struct sensor_device_attribute sda_temp_tolerance[] = { |
| 898 | SENSOR_ATTR(temp1_tolerance, S_IWUSR | S_IRUGO, |
| 899 | show_temp_tolerance, store_temp_tolerance, 0), |
| 900 | SENSOR_ATTR(temp2_tolerance, S_IWUSR | S_IRUGO, |
| 901 | show_temp_tolerance, store_temp_tolerance, 1), |
| 902 | SENSOR_ATTR(temp3_tolerance, S_IWUSR | S_IRUGO, |
| 903 | show_temp_tolerance, store_temp_tolerance, 2), |
| 904 | }; |
| 905 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 906 | /* read/write the temperature1, includes measured value and limits */ |
| 907 | static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, |
| 908 | char *buf) |
| 909 | { |
| 910 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 911 | struct w83791d_data *data = w83791d_update_device(dev); |
| 912 | return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[attr->index])); |
| 913 | } |
| 914 | |
| 915 | static ssize_t store_temp1(struct device *dev, struct device_attribute *devattr, |
| 916 | const char *buf, size_t count) |
| 917 | { |
| 918 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 919 | struct i2c_client *client = to_i2c_client(dev); |
| 920 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 921 | long val = simple_strtol(buf, NULL, 10); |
| 922 | int nr = attr->index; |
| 923 | |
| 924 | mutex_lock(&data->update_lock); |
| 925 | data->temp1[nr] = TEMP1_TO_REG(val); |
| 926 | w83791d_write(client, W83791D_REG_TEMP1[nr], data->temp1[nr]); |
| 927 | mutex_unlock(&data->update_lock); |
| 928 | return count; |
| 929 | } |
| 930 | |
| 931 | /* read/write temperature2-3, includes measured value and limits */ |
| 932 | static ssize_t show_temp23(struct device *dev, struct device_attribute *devattr, |
| 933 | char *buf) |
| 934 | { |
| 935 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 936 | struct w83791d_data *data = w83791d_update_device(dev); |
| 937 | int nr = attr->nr; |
| 938 | int index = attr->index; |
| 939 | return sprintf(buf, "%d\n", TEMP23_FROM_REG(data->temp_add[nr][index])); |
| 940 | } |
| 941 | |
| 942 | static ssize_t store_temp23(struct device *dev, |
| 943 | struct device_attribute *devattr, |
| 944 | const char *buf, size_t count) |
| 945 | { |
| 946 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 947 | struct i2c_client *client = to_i2c_client(dev); |
| 948 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 949 | long val = simple_strtol(buf, NULL, 10); |
| 950 | int nr = attr->nr; |
| 951 | int index = attr->index; |
| 952 | |
| 953 | mutex_lock(&data->update_lock); |
| 954 | data->temp_add[nr][index] = TEMP23_TO_REG(val); |
| 955 | w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2], |
| 956 | data->temp_add[nr][index] >> 8); |
| 957 | w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2 + 1], |
| 958 | data->temp_add[nr][index] & 0x80); |
| 959 | mutex_unlock(&data->update_lock); |
| 960 | |
| 961 | return count; |
| 962 | } |
| 963 | |
| 964 | static struct sensor_device_attribute_2 sda_temp_input[] = { |
| 965 | SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0), |
| 966 | SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0), |
| 967 | SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0), |
| 968 | }; |
| 969 | |
| 970 | static struct sensor_device_attribute_2 sda_temp_max[] = { |
| 971 | SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, |
| 972 | show_temp1, store_temp1, 0, 1), |
| 973 | SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, |
| 974 | show_temp23, store_temp23, 0, 1), |
| 975 | SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, |
| 976 | show_temp23, store_temp23, 1, 1), |
| 977 | }; |
| 978 | |
| 979 | static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { |
| 980 | SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, |
| 981 | show_temp1, store_temp1, 0, 2), |
| 982 | SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, |
| 983 | show_temp23, store_temp23, 0, 2), |
| 984 | SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, |
| 985 | show_temp23, store_temp23, 1, 2), |
| 986 | }; |
| 987 | |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 988 | /* Note: The bitmask for the beep enable/disable is different than |
| 989 | the bitmask for the alarm. */ |
| 990 | static struct sensor_device_attribute sda_temp_beep[] = { |
| 991 | SENSOR_ATTR(temp1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 4), |
| 992 | SENSOR_ATTR(temp2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 5), |
| 993 | SENSOR_ATTR(temp3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 1), |
| 994 | }; |
| 995 | |
| 996 | static struct sensor_device_attribute sda_temp_alarm[] = { |
| 997 | SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4), |
| 998 | SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5), |
| 999 | SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), |
| 1000 | }; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1001 | |
| 1002 | /* get reatime status of all sensors items: voltage, temp, fan */ |
| 1003 | static ssize_t show_alarms_reg(struct device *dev, |
| 1004 | struct device_attribute *attr, char *buf) |
| 1005 | { |
| 1006 | struct w83791d_data *data = w83791d_update_device(dev); |
| 1007 | return sprintf(buf, "%u\n", data->alarms); |
| 1008 | } |
| 1009 | |
| 1010 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); |
| 1011 | |
| 1012 | /* Beep control */ |
| 1013 | |
| 1014 | #define GLOBAL_BEEP_ENABLE_SHIFT 15 |
| 1015 | #define GLOBAL_BEEP_ENABLE_MASK (1 << GLOBAL_BEEP_ENABLE_SHIFT) |
| 1016 | |
| 1017 | static ssize_t show_beep_enable(struct device *dev, |
| 1018 | struct device_attribute *attr, char *buf) |
| 1019 | { |
| 1020 | struct w83791d_data *data = w83791d_update_device(dev); |
| 1021 | return sprintf(buf, "%d\n", data->beep_enable); |
| 1022 | } |
| 1023 | |
| 1024 | static ssize_t show_beep_mask(struct device *dev, |
| 1025 | struct device_attribute *attr, char *buf) |
| 1026 | { |
| 1027 | struct w83791d_data *data = w83791d_update_device(dev); |
| 1028 | return sprintf(buf, "%d\n", BEEP_MASK_FROM_REG(data->beep_mask)); |
| 1029 | } |
| 1030 | |
| 1031 | |
| 1032 | static ssize_t store_beep_mask(struct device *dev, |
| 1033 | struct device_attribute *attr, |
| 1034 | const char *buf, size_t count) |
| 1035 | { |
| 1036 | struct i2c_client *client = to_i2c_client(dev); |
| 1037 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 1038 | long val = simple_strtol(buf, NULL, 10); |
| 1039 | int i; |
| 1040 | |
| 1041 | mutex_lock(&data->update_lock); |
| 1042 | |
| 1043 | /* The beep_enable state overrides any enabling request from |
| 1044 | the masks */ |
| 1045 | data->beep_mask = BEEP_MASK_TO_REG(val) & ~GLOBAL_BEEP_ENABLE_MASK; |
| 1046 | data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); |
| 1047 | |
| 1048 | val = data->beep_mask; |
| 1049 | |
| 1050 | for (i = 0; i < 3; i++) { |
| 1051 | w83791d_write(client, W83791D_REG_BEEP_CTRL[i], (val & 0xff)); |
| 1052 | val >>= 8; |
| 1053 | } |
| 1054 | |
| 1055 | mutex_unlock(&data->update_lock); |
| 1056 | |
| 1057 | return count; |
| 1058 | } |
| 1059 | |
| 1060 | static ssize_t store_beep_enable(struct device *dev, |
| 1061 | struct device_attribute *attr, |
| 1062 | const char *buf, size_t count) |
| 1063 | { |
| 1064 | struct i2c_client *client = to_i2c_client(dev); |
| 1065 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 1066 | long val = simple_strtol(buf, NULL, 10); |
| 1067 | |
| 1068 | mutex_lock(&data->update_lock); |
| 1069 | |
| 1070 | data->beep_enable = val ? 1 : 0; |
| 1071 | |
| 1072 | /* Keep the full mask value in sync with the current enable */ |
| 1073 | data->beep_mask &= ~GLOBAL_BEEP_ENABLE_MASK; |
| 1074 | data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); |
| 1075 | |
| 1076 | /* The global control is in the second beep control register |
| 1077 | so only need to update that register */ |
| 1078 | val = (data->beep_mask >> 8) & 0xff; |
| 1079 | |
| 1080 | w83791d_write(client, W83791D_REG_BEEP_CTRL[1], val); |
| 1081 | |
| 1082 | mutex_unlock(&data->update_lock); |
| 1083 | |
| 1084 | return count; |
| 1085 | } |
| 1086 | |
| 1087 | static struct sensor_device_attribute sda_beep_ctrl[] = { |
| 1088 | SENSOR_ATTR(beep_enable, S_IRUGO | S_IWUSR, |
| 1089 | show_beep_enable, store_beep_enable, 0), |
| 1090 | SENSOR_ATTR(beep_mask, S_IRUGO | S_IWUSR, |
| 1091 | show_beep_mask, store_beep_mask, 1) |
| 1092 | }; |
| 1093 | |
| 1094 | /* cpu voltage regulation information */ |
| 1095 | static ssize_t show_vid_reg(struct device *dev, |
| 1096 | struct device_attribute *attr, char *buf) |
| 1097 | { |
| 1098 | struct w83791d_data *data = w83791d_update_device(dev); |
| 1099 | return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); |
| 1100 | } |
| 1101 | |
| 1102 | static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); |
| 1103 | |
| 1104 | static ssize_t show_vrm_reg(struct device *dev, |
| 1105 | struct device_attribute *attr, char *buf) |
| 1106 | { |
Jean Delvare | 90d6619 | 2007-10-08 18:24:35 +0200 | [diff] [blame] | 1107 | struct w83791d_data *data = dev_get_drvdata(dev); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1108 | return sprintf(buf, "%d\n", data->vrm); |
| 1109 | } |
| 1110 | |
| 1111 | static ssize_t store_vrm_reg(struct device *dev, |
| 1112 | struct device_attribute *attr, |
| 1113 | const char *buf, size_t count) |
| 1114 | { |
Jean Delvare | 8f74efe | 2007-12-01 11:25:33 +0100 | [diff] [blame] | 1115 | struct w83791d_data *data = dev_get_drvdata(dev); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1116 | |
| 1117 | /* No lock needed as vrm is internal to the driver |
| 1118 | (not read from a chip register) and so is not |
| 1119 | updated in w83791d_update_device() */ |
Jean Delvare | 8f74efe | 2007-12-01 11:25:33 +0100 | [diff] [blame] | 1120 | data->vrm = simple_strtoul(buf, NULL, 10); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1121 | |
| 1122 | return count; |
| 1123 | } |
| 1124 | |
| 1125 | static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); |
| 1126 | |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1127 | #define IN_UNIT_ATTRS(X) \ |
| 1128 | &sda_in_input[X].dev_attr.attr, \ |
| 1129 | &sda_in_min[X].dev_attr.attr, \ |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 1130 | &sda_in_max[X].dev_attr.attr, \ |
| 1131 | &sda_in_beep[X].dev_attr.attr, \ |
| 1132 | &sda_in_alarm[X].dev_attr.attr |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1133 | |
| 1134 | #define FAN_UNIT_ATTRS(X) \ |
| 1135 | &sda_fan_input[X].dev_attr.attr, \ |
| 1136 | &sda_fan_min[X].dev_attr.attr, \ |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 1137 | &sda_fan_div[X].dev_attr.attr, \ |
| 1138 | &sda_fan_beep[X].dev_attr.attr, \ |
| 1139 | &sda_fan_alarm[X].dev_attr.attr |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1140 | |
| 1141 | #define TEMP_UNIT_ATTRS(X) \ |
| 1142 | &sda_temp_input[X].dev_attr.attr, \ |
| 1143 | &sda_temp_max[X].dev_attr.attr, \ |
Charles Spirakis | 6438312 | 2007-09-04 13:31:56 -0700 | [diff] [blame] | 1144 | &sda_temp_max_hyst[X].dev_attr.attr, \ |
| 1145 | &sda_temp_beep[X].dev_attr.attr, \ |
| 1146 | &sda_temp_alarm[X].dev_attr.attr |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1147 | |
| 1148 | static struct attribute *w83791d_attributes[] = { |
| 1149 | IN_UNIT_ATTRS(0), |
| 1150 | IN_UNIT_ATTRS(1), |
| 1151 | IN_UNIT_ATTRS(2), |
| 1152 | IN_UNIT_ATTRS(3), |
| 1153 | IN_UNIT_ATTRS(4), |
| 1154 | IN_UNIT_ATTRS(5), |
| 1155 | IN_UNIT_ATTRS(6), |
| 1156 | IN_UNIT_ATTRS(7), |
| 1157 | IN_UNIT_ATTRS(8), |
| 1158 | IN_UNIT_ATTRS(9), |
| 1159 | FAN_UNIT_ATTRS(0), |
| 1160 | FAN_UNIT_ATTRS(1), |
| 1161 | FAN_UNIT_ATTRS(2), |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1162 | TEMP_UNIT_ATTRS(0), |
| 1163 | TEMP_UNIT_ATTRS(1), |
| 1164 | TEMP_UNIT_ATTRS(2), |
| 1165 | &dev_attr_alarms.attr, |
| 1166 | &sda_beep_ctrl[0].dev_attr.attr, |
| 1167 | &sda_beep_ctrl[1].dev_attr.attr, |
| 1168 | &dev_attr_cpu0_vid.attr, |
| 1169 | &dev_attr_vrm.attr, |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1170 | &sda_pwm[0].dev_attr.attr, |
| 1171 | &sda_pwm[1].dev_attr.attr, |
| 1172 | &sda_pwm[2].dev_attr.attr, |
Marc Hulsman | b5938f8 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1173 | &sda_pwmenable[0].dev_attr.attr, |
| 1174 | &sda_pwmenable[1].dev_attr.attr, |
| 1175 | &sda_pwmenable[2].dev_attr.attr, |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1176 | &sda_temp_target[0].dev_attr.attr, |
| 1177 | &sda_temp_target[1].dev_attr.attr, |
| 1178 | &sda_temp_target[2].dev_attr.attr, |
| 1179 | &sda_temp_tolerance[0].dev_attr.attr, |
| 1180 | &sda_temp_tolerance[1].dev_attr.attr, |
| 1181 | &sda_temp_tolerance[2].dev_attr.attr, |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1182 | NULL |
| 1183 | }; |
| 1184 | |
| 1185 | static const struct attribute_group w83791d_group = { |
| 1186 | .attrs = w83791d_attributes, |
| 1187 | }; |
| 1188 | |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1189 | /* Separate group of attributes for fan/pwm 4-5. Their pins can also be |
| 1190 | in use for GPIO in which case their sysfs-interface should not be made |
| 1191 | available */ |
| 1192 | static struct attribute *w83791d_attributes_fanpwm45[] = { |
| 1193 | FAN_UNIT_ATTRS(3), |
| 1194 | FAN_UNIT_ATTRS(4), |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1195 | &sda_pwm[3].dev_attr.attr, |
| 1196 | &sda_pwm[4].dev_attr.attr, |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1197 | NULL |
| 1198 | }; |
| 1199 | |
| 1200 | static const struct attribute_group w83791d_group_fanpwm45 = { |
| 1201 | .attrs = w83791d_attributes_fanpwm45, |
| 1202 | }; |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1203 | |
| 1204 | static int w83791d_detect_subclients(struct i2c_client *client) |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1205 | { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1206 | struct i2c_adapter *adapter = client->adapter; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1207 | struct w83791d_data *data = i2c_get_clientdata(client); |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1208 | int address = client->addr; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1209 | int i, id, err; |
| 1210 | u8 val; |
| 1211 | |
| 1212 | id = i2c_adapter_id(adapter); |
| 1213 | if (force_subclients[0] == id && force_subclients[1] == address) { |
| 1214 | for (i = 2; i <= 3; i++) { |
| 1215 | if (force_subclients[i] < 0x48 || |
| 1216 | force_subclients[i] > 0x4f) { |
| 1217 | dev_err(&client->dev, |
| 1218 | "invalid subclient " |
| 1219 | "address %d; must be 0x48-0x4f\n", |
| 1220 | force_subclients[i]); |
| 1221 | err = -ENODEV; |
| 1222 | goto error_sc_0; |
| 1223 | } |
| 1224 | } |
| 1225 | w83791d_write(client, W83791D_REG_I2C_SUBADDR, |
| 1226 | (force_subclients[2] & 0x07) | |
| 1227 | ((force_subclients[3] & 0x07) << 4)); |
| 1228 | } |
| 1229 | |
| 1230 | val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); |
| 1231 | if (!(val & 0x08)) { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1232 | data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1233 | } |
| 1234 | if (!(val & 0x80)) { |
| 1235 | if ((data->lm75[0] != NULL) && |
| 1236 | ((val & 0x7) == ((val >> 4) & 0x7))) { |
| 1237 | dev_err(&client->dev, |
| 1238 | "duplicate addresses 0x%x, " |
| 1239 | "use force_subclient\n", |
| 1240 | data->lm75[0]->addr); |
| 1241 | err = -ENODEV; |
| 1242 | goto error_sc_1; |
| 1243 | } |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1244 | data->lm75[1] = i2c_new_dummy(adapter, |
| 1245 | 0x48 + ((val >> 4) & 0x7)); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1246 | } |
| 1247 | |
| 1248 | return 0; |
| 1249 | |
| 1250 | /* Undo inits in case of errors */ |
| 1251 | |
| 1252 | error_sc_1: |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1253 | if (data->lm75[0] != NULL) |
| 1254 | i2c_unregister_device(data->lm75[0]); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1255 | error_sc_0: |
| 1256 | return err; |
| 1257 | } |
| 1258 | |
| 1259 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1260 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
Jean Delvare | 310ec79 | 2009-12-14 21:17:23 +0100 | [diff] [blame] | 1261 | static int w83791d_detect(struct i2c_client *client, |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1262 | struct i2c_board_info *info) |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1263 | { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1264 | struct i2c_adapter *adapter = client->adapter; |
| 1265 | int val1, val2; |
| 1266 | unsigned short address = client->addr; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1267 | |
| 1268 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1269 | return -ENODEV; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1270 | } |
| 1271 | |
Jean Delvare | 3f8b845 | 2009-12-09 20:35:55 +0100 | [diff] [blame] | 1272 | if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) |
| 1273 | return -ENODEV; |
| 1274 | |
| 1275 | val1 = w83791d_read(client, W83791D_REG_BANK); |
| 1276 | val2 = w83791d_read(client, W83791D_REG_CHIPMAN); |
| 1277 | /* Check for Winbond ID if in bank 0 */ |
| 1278 | if (!(val1 & 0x07)) { |
| 1279 | if ((!(val1 & 0x80) && val2 != 0xa3) || |
| 1280 | ( (val1 & 0x80) && val2 != 0x5c)) { |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1281 | return -ENODEV; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1282 | } |
| 1283 | } |
Jean Delvare | 3f8b845 | 2009-12-09 20:35:55 +0100 | [diff] [blame] | 1284 | /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR |
| 1285 | should match */ |
| 1286 | if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) |
| 1287 | return -ENODEV; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1288 | |
Jean Delvare | 3f8b845 | 2009-12-09 20:35:55 +0100 | [diff] [blame] | 1289 | /* We want bank 0 and Vendor ID high byte */ |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1290 | val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78; |
| 1291 | w83791d_write(client, W83791D_REG_BANK, val1 | 0x80); |
| 1292 | |
| 1293 | /* Verify it is a Winbond w83791d */ |
Jean Delvare | 3f8b845 | 2009-12-09 20:35:55 +0100 | [diff] [blame] | 1294 | val1 = w83791d_read(client, W83791D_REG_WCHIPID); |
| 1295 | val2 = w83791d_read(client, W83791D_REG_CHIPMAN); |
| 1296 | if (val1 != 0x71 || val2 != 0x5c) |
| 1297 | return -ENODEV; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1298 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1299 | strlcpy(info->type, "w83791d", I2C_NAME_SIZE); |
| 1300 | |
| 1301 | return 0; |
| 1302 | } |
| 1303 | |
| 1304 | static int w83791d_probe(struct i2c_client *client, |
| 1305 | const struct i2c_device_id *id) |
| 1306 | { |
| 1307 | struct w83791d_data *data; |
| 1308 | struct device *dev = &client->dev; |
Michael Borisov | 16a515f | 2008-08-15 00:40:32 -0700 | [diff] [blame] | 1309 | int i, err; |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1310 | u8 has_fanpwm45; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1311 | |
| 1312 | #ifdef DEBUG |
Michael Borisov | 16a515f | 2008-08-15 00:40:32 -0700 | [diff] [blame] | 1313 | int val1; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1314 | val1 = w83791d_read(client, W83791D_REG_DID_VID4); |
| 1315 | dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n", |
| 1316 | (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); |
| 1317 | #endif |
| 1318 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1319 | data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL); |
| 1320 | if (!data) { |
| 1321 | err = -ENOMEM; |
| 1322 | goto error0; |
| 1323 | } |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1324 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1325 | i2c_set_clientdata(client, data); |
| 1326 | mutex_init(&data->update_lock); |
| 1327 | |
| 1328 | err = w83791d_detect_subclients(client); |
| 1329 | if (err) |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1330 | goto error1; |
| 1331 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1332 | /* Initialize the chip */ |
| 1333 | w83791d_init_client(client); |
| 1334 | |
| 1335 | /* If the fan_div is changed, make sure there is a rational |
| 1336 | fan_min in place */ |
| 1337 | for (i = 0; i < NUMBER_OF_FANIN; i++) { |
| 1338 | data->fan_min[i] = w83791d_read(client, W83791D_REG_FAN_MIN[i]); |
| 1339 | } |
| 1340 | |
| 1341 | /* Register sysfs hooks */ |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1342 | if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group))) |
| 1343 | goto error3; |
| 1344 | |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1345 | /* Check if pins of fan/pwm 4-5 are in use as GPIO */ |
| 1346 | has_fanpwm45 = w83791d_read(client, W83791D_REG_GPIO) & 0x10; |
| 1347 | if (has_fanpwm45) { |
| 1348 | err = sysfs_create_group(&client->dev.kobj, |
| 1349 | &w83791d_group_fanpwm45); |
| 1350 | if (err) |
| 1351 | goto error4; |
| 1352 | } |
| 1353 | |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1354 | /* Everything is ready, now register the working device */ |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 1355 | data->hwmon_dev = hwmon_device_register(dev); |
| 1356 | if (IS_ERR(data->hwmon_dev)) { |
| 1357 | err = PTR_ERR(data->hwmon_dev); |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1358 | goto error5; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1359 | } |
| 1360 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1361 | return 0; |
| 1362 | |
Marc Hulsman | 6e1ecd9 | 2008-10-17 17:51:16 +0200 | [diff] [blame] | 1363 | error5: |
| 1364 | if (has_fanpwm45) |
| 1365 | sysfs_remove_group(&client->dev.kobj, &w83791d_group_fanpwm45); |
Jim Cromie | 34fc921 | 2006-10-08 21:56:29 +0200 | [diff] [blame] | 1366 | error4: |
| 1367 | sysfs_remove_group(&client->dev.kobj, &w83791d_group); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1368 | error3: |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1369 | if (data->lm75[0] != NULL) |
| 1370 | i2c_unregister_device(data->lm75[0]); |
| 1371 | if (data->lm75[1] != NULL) |
| 1372 | i2c_unregister_device(data->lm75[1]); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1373 | error1: |
| 1374 | kfree(data); |
| 1375 | error0: |
| 1376 | return err; |
| 1377 | } |
| 1378 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1379 | static int w83791d_remove(struct i2c_client *client) |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1380 | { |
| 1381 | struct w83791d_data *data = i2c_get_clientdata(client); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1382 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1383 | hwmon_device_unregister(data->hwmon_dev); |
| 1384 | sysfs_remove_group(&client->dev.kobj, &w83791d_group); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1385 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1386 | if (data->lm75[0] != NULL) |
| 1387 | i2c_unregister_device(data->lm75[0]); |
| 1388 | if (data->lm75[1] != NULL) |
| 1389 | i2c_unregister_device(data->lm75[1]); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1390 | |
Jean Delvare | cb0c1af | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1391 | kfree(data); |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1392 | return 0; |
| 1393 | } |
| 1394 | |
| 1395 | static void w83791d_init_client(struct i2c_client *client) |
| 1396 | { |
| 1397 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 1398 | u8 tmp; |
| 1399 | u8 old_beep; |
| 1400 | |
| 1401 | /* The difference between reset and init is that reset |
| 1402 | does a hard reset of the chip via index 0x40, bit 7, |
| 1403 | but init simply forces certain registers to have "sane" |
| 1404 | values. The hope is that the BIOS has done the right |
| 1405 | thing (which is why the default is reset=0, init=0), |
| 1406 | but if not, reset is the hard hammer and init |
| 1407 | is the soft mallet both of which are trying to whack |
| 1408 | things into place... |
| 1409 | NOTE: The data sheet makes a distinction between |
| 1410 | "power on defaults" and "reset by MR". As far as I can tell, |
| 1411 | the hard reset puts everything into a power-on state so I'm |
| 1412 | not sure what "reset by MR" means or how it can happen. |
| 1413 | */ |
| 1414 | if (reset || init) { |
| 1415 | /* keep some BIOS settings when we... */ |
| 1416 | old_beep = w83791d_read(client, W83791D_REG_BEEP_CONFIG); |
| 1417 | |
| 1418 | if (reset) { |
| 1419 | /* ... reset the chip and ... */ |
| 1420 | w83791d_write(client, W83791D_REG_CONFIG, 0x80); |
| 1421 | } |
| 1422 | |
| 1423 | /* ... disable power-on abnormal beep */ |
| 1424 | w83791d_write(client, W83791D_REG_BEEP_CONFIG, old_beep | 0x80); |
| 1425 | |
| 1426 | /* disable the global beep (not done by hard reset) */ |
| 1427 | tmp = w83791d_read(client, W83791D_REG_BEEP_CTRL[1]); |
| 1428 | w83791d_write(client, W83791D_REG_BEEP_CTRL[1], tmp & 0xef); |
| 1429 | |
| 1430 | if (init) { |
| 1431 | /* Make sure monitoring is turned on for add-ons */ |
| 1432 | tmp = w83791d_read(client, W83791D_REG_TEMP2_CONFIG); |
| 1433 | if (tmp & 1) { |
| 1434 | w83791d_write(client, W83791D_REG_TEMP2_CONFIG, |
| 1435 | tmp & 0xfe); |
| 1436 | } |
| 1437 | |
| 1438 | tmp = w83791d_read(client, W83791D_REG_TEMP3_CONFIG); |
| 1439 | if (tmp & 1) { |
| 1440 | w83791d_write(client, W83791D_REG_TEMP3_CONFIG, |
| 1441 | tmp & 0xfe); |
| 1442 | } |
| 1443 | |
| 1444 | /* Start monitoring */ |
| 1445 | tmp = w83791d_read(client, W83791D_REG_CONFIG) & 0xf7; |
| 1446 | w83791d_write(client, W83791D_REG_CONFIG, tmp | 0x01); |
| 1447 | } |
| 1448 | } |
| 1449 | |
| 1450 | data->vrm = vid_which_vrm(); |
| 1451 | } |
| 1452 | |
| 1453 | static struct w83791d_data *w83791d_update_device(struct device *dev) |
| 1454 | { |
| 1455 | struct i2c_client *client = to_i2c_client(dev); |
| 1456 | struct w83791d_data *data = i2c_get_clientdata(client); |
| 1457 | int i, j; |
| 1458 | u8 reg_array_tmp[3]; |
Marc Hulsman | ad02ad8 | 2008-08-06 22:41:04 +0200 | [diff] [blame] | 1459 | u8 vbat_reg; |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1460 | |
| 1461 | mutex_lock(&data->update_lock); |
| 1462 | |
| 1463 | if (time_after(jiffies, data->last_updated + (HZ * 3)) |
| 1464 | || !data->valid) { |
| 1465 | dev_dbg(dev, "Starting w83791d device update\n"); |
| 1466 | |
| 1467 | /* Update the voltages measured value and limits */ |
| 1468 | for (i = 0; i < NUMBER_OF_VIN; i++) { |
| 1469 | data->in[i] = w83791d_read(client, |
| 1470 | W83791D_REG_IN[i]); |
| 1471 | data->in_max[i] = w83791d_read(client, |
| 1472 | W83791D_REG_IN_MAX[i]); |
| 1473 | data->in_min[i] = w83791d_read(client, |
| 1474 | W83791D_REG_IN_MIN[i]); |
| 1475 | } |
| 1476 | |
| 1477 | /* Update the fan counts and limits */ |
| 1478 | for (i = 0; i < NUMBER_OF_FANIN; i++) { |
| 1479 | /* Update the Fan measured value and limits */ |
| 1480 | data->fan[i] = w83791d_read(client, |
| 1481 | W83791D_REG_FAN[i]); |
| 1482 | data->fan_min[i] = w83791d_read(client, |
| 1483 | W83791D_REG_FAN_MIN[i]); |
| 1484 | } |
| 1485 | |
| 1486 | /* Update the fan divisor */ |
| 1487 | for (i = 0; i < 3; i++) { |
| 1488 | reg_array_tmp[i] = w83791d_read(client, |
| 1489 | W83791D_REG_FAN_DIV[i]); |
| 1490 | } |
| 1491 | data->fan_div[0] = (reg_array_tmp[0] >> 4) & 0x03; |
| 1492 | data->fan_div[1] = (reg_array_tmp[0] >> 6) & 0x03; |
| 1493 | data->fan_div[2] = (reg_array_tmp[1] >> 6) & 0x03; |
| 1494 | data->fan_div[3] = reg_array_tmp[2] & 0x07; |
| 1495 | data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; |
| 1496 | |
Marc Hulsman | ad02ad8 | 2008-08-06 22:41:04 +0200 | [diff] [blame] | 1497 | /* The fan divisor for fans 0-2 get bit 2 from |
| 1498 | bits 5-7 respectively of vbat register */ |
| 1499 | vbat_reg = w83791d_read(client, W83791D_REG_VBAT); |
| 1500 | for (i = 0; i < 3; i++) |
| 1501 | data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; |
| 1502 | |
Marc Hulsman | 6495ce1 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1503 | /* Update PWM duty cycle */ |
| 1504 | for (i = 0; i < NUMBER_OF_PWM; i++) { |
| 1505 | data->pwm[i] = w83791d_read(client, |
| 1506 | W83791D_REG_PWM[i]); |
| 1507 | } |
| 1508 | |
Marc Hulsman | b5938f8 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1509 | /* Update PWM enable status */ |
| 1510 | for (i = 0; i < 2; i++) { |
| 1511 | reg_array_tmp[i] = w83791d_read(client, |
| 1512 | W83791D_REG_FAN_CFG[i]); |
| 1513 | } |
| 1514 | data->pwm_enable[0] = (reg_array_tmp[0] >> 2) & 0x03; |
| 1515 | data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03; |
| 1516 | data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03; |
| 1517 | |
Marc Hulsman | a5a4598 | 2008-10-17 17:51:17 +0200 | [diff] [blame] | 1518 | /* Update PWM target temperature */ |
| 1519 | for (i = 0; i < 3; i++) { |
| 1520 | data->temp_target[i] = w83791d_read(client, |
| 1521 | W83791D_REG_TEMP_TARGET[i]) & 0x7f; |
| 1522 | } |
| 1523 | |
| 1524 | /* Update PWM temperature tolerance */ |
| 1525 | for (i = 0; i < 2; i++) { |
| 1526 | reg_array_tmp[i] = w83791d_read(client, |
| 1527 | W83791D_REG_TEMP_TOL[i]); |
| 1528 | } |
| 1529 | data->temp_tolerance[0] = reg_array_tmp[0] & 0x0f; |
| 1530 | data->temp_tolerance[1] = (reg_array_tmp[0] >> 4) & 0x0f; |
| 1531 | data->temp_tolerance[2] = reg_array_tmp[1] & 0x0f; |
| 1532 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1533 | /* Update the first temperature sensor */ |
| 1534 | for (i = 0; i < 3; i++) { |
| 1535 | data->temp1[i] = w83791d_read(client, |
| 1536 | W83791D_REG_TEMP1[i]); |
| 1537 | } |
| 1538 | |
| 1539 | /* Update the rest of the temperature sensors */ |
| 1540 | for (i = 0; i < 2; i++) { |
| 1541 | for (j = 0; j < 3; j++) { |
| 1542 | data->temp_add[i][j] = |
| 1543 | (w83791d_read(client, |
| 1544 | W83791D_REG_TEMP_ADD[i][j * 2]) << 8) | |
| 1545 | w83791d_read(client, |
| 1546 | W83791D_REG_TEMP_ADD[i][j * 2 + 1]); |
| 1547 | } |
| 1548 | } |
| 1549 | |
| 1550 | /* Update the realtime status */ |
| 1551 | data->alarms = |
| 1552 | w83791d_read(client, W83791D_REG_ALARM1) + |
| 1553 | (w83791d_read(client, W83791D_REG_ALARM2) << 8) + |
| 1554 | (w83791d_read(client, W83791D_REG_ALARM3) << 16); |
| 1555 | |
| 1556 | /* Update the beep configuration information */ |
| 1557 | data->beep_mask = |
| 1558 | w83791d_read(client, W83791D_REG_BEEP_CTRL[0]) + |
| 1559 | (w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) + |
| 1560 | (w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16); |
| 1561 | |
Charles Spirakis | 125751cb | 2006-09-24 20:53:04 +0200 | [diff] [blame] | 1562 | /* Extract global beep enable flag */ |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1563 | data->beep_enable = |
| 1564 | (data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01; |
| 1565 | |
| 1566 | /* Update the cpu voltage information */ |
| 1567 | i = w83791d_read(client, W83791D_REG_VID_FANDIV); |
| 1568 | data->vid = i & 0x0f; |
| 1569 | data->vid |= (w83791d_read(client, W83791D_REG_DID_VID4) & 0x01) |
| 1570 | << 4; |
| 1571 | |
| 1572 | data->last_updated = jiffies; |
| 1573 | data->valid = 1; |
| 1574 | } |
| 1575 | |
| 1576 | mutex_unlock(&data->update_lock); |
| 1577 | |
| 1578 | #ifdef DEBUG |
| 1579 | w83791d_print_debug(data, dev); |
| 1580 | #endif |
| 1581 | |
| 1582 | return data; |
| 1583 | } |
| 1584 | |
| 1585 | #ifdef DEBUG |
| 1586 | static void w83791d_print_debug(struct w83791d_data *data, struct device *dev) |
| 1587 | { |
| 1588 | int i = 0, j = 0; |
| 1589 | |
| 1590 | dev_dbg(dev, "======Start of w83791d debug values======\n"); |
| 1591 | dev_dbg(dev, "%d set of Voltages: ===>\n", NUMBER_OF_VIN); |
| 1592 | for (i = 0; i < NUMBER_OF_VIN; i++) { |
| 1593 | dev_dbg(dev, "vin[%d] is: 0x%02x\n", i, data->in[i]); |
| 1594 | dev_dbg(dev, "vin[%d] min is: 0x%02x\n", i, data->in_min[i]); |
| 1595 | dev_dbg(dev, "vin[%d] max is: 0x%02x\n", i, data->in_max[i]); |
| 1596 | } |
| 1597 | dev_dbg(dev, "%d set of Fan Counts/Divisors: ===>\n", NUMBER_OF_FANIN); |
| 1598 | for (i = 0; i < NUMBER_OF_FANIN; i++) { |
| 1599 | dev_dbg(dev, "fan[%d] is: 0x%02x\n", i, data->fan[i]); |
| 1600 | dev_dbg(dev, "fan[%d] min is: 0x%02x\n", i, data->fan_min[i]); |
| 1601 | dev_dbg(dev, "fan_div[%d] is: 0x%02x\n", i, data->fan_div[i]); |
| 1602 | } |
| 1603 | |
| 1604 | /* temperature math is signed, but only print out the |
| 1605 | bits that matter */ |
| 1606 | dev_dbg(dev, "%d set of Temperatures: ===>\n", NUMBER_OF_TEMPIN); |
| 1607 | for (i = 0; i < 3; i++) { |
| 1608 | dev_dbg(dev, "temp1[%d] is: 0x%02x\n", i, (u8) data->temp1[i]); |
| 1609 | } |
| 1610 | for (i = 0; i < 2; i++) { |
| 1611 | for (j = 0; j < 3; j++) { |
| 1612 | dev_dbg(dev, "temp_add[%d][%d] is: 0x%04x\n", i, j, |
| 1613 | (u16) data->temp_add[i][j]); |
| 1614 | } |
| 1615 | } |
| 1616 | |
| 1617 | dev_dbg(dev, "Misc Information: ===>\n"); |
| 1618 | dev_dbg(dev, "alarm is: 0x%08x\n", data->alarms); |
| 1619 | dev_dbg(dev, "beep_mask is: 0x%08x\n", data->beep_mask); |
| 1620 | dev_dbg(dev, "beep_enable is: %d\n", data->beep_enable); |
| 1621 | dev_dbg(dev, "vid is: 0x%02x\n", data->vid); |
| 1622 | dev_dbg(dev, "vrm is: 0x%02x\n", data->vrm); |
| 1623 | dev_dbg(dev, "=======End of w83791d debug values========\n"); |
| 1624 | dev_dbg(dev, "\n"); |
| 1625 | } |
| 1626 | #endif |
| 1627 | |
| 1628 | static int __init sensors_w83791d_init(void) |
| 1629 | { |
| 1630 | return i2c_add_driver(&w83791d_driver); |
| 1631 | } |
| 1632 | |
| 1633 | static void __exit sensors_w83791d_exit(void) |
| 1634 | { |
| 1635 | i2c_del_driver(&w83791d_driver); |
| 1636 | } |
| 1637 | |
| 1638 | MODULE_AUTHOR("Charles Spirakis <bezaur@gmail.com>"); |
| 1639 | MODULE_DESCRIPTION("W83791D driver"); |
| 1640 | MODULE_LICENSE("GPL"); |
| 1641 | |
| 1642 | module_init(sensors_w83791d_init); |
| 1643 | module_exit(sensors_w83791d_exit); |