Thomas Gleixner | 2874c5f | 2019-05-27 08:55:01 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Paul Burton | 2967683 | 2016-09-28 16:30:56 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2016 Imagination Technologies |
Paul Burton | fb615d6 | 2017-10-25 17:04:33 -0700 | [diff] [blame] | 4 | * Author: Paul Burton <paul.burton@mips.com> |
Paul Burton | 2967683 | 2016-09-28 16:30:56 +0100 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #include <linux/delay.h> |
| 8 | #include <linux/io.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/pci.h> |
| 11 | #include <linux/pm.h> |
| 12 | |
| 13 | static struct pci_dev *pm_dev; |
| 14 | static resource_size_t io_offset; |
| 15 | |
| 16 | enum piix4_pm_io_reg { |
| 17 | PIIX4_FUNC3IO_PMSTS = 0x00, |
| 18 | #define PIIX4_FUNC3IO_PMSTS_PWRBTN_STS BIT(8) |
| 19 | PIIX4_FUNC3IO_PMCNTRL = 0x04, |
| 20 | #define PIIX4_FUNC3IO_PMCNTRL_SUS_EN BIT(13) |
| 21 | #define PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF (0x0 << 10) |
| 22 | }; |
| 23 | |
| 24 | #define PIIX4_SUSPEND_MAGIC 0x00120002 |
| 25 | |
| 26 | static const int piix4_pm_io_region = PCI_BRIDGE_RESOURCES; |
| 27 | |
| 28 | static void piix4_poweroff(void) |
| 29 | { |
| 30 | int spec_devid; |
| 31 | u16 sts; |
| 32 | |
| 33 | /* Ensure the power button status is clear */ |
| 34 | while (1) { |
| 35 | sts = inw(io_offset + PIIX4_FUNC3IO_PMSTS); |
| 36 | if (!(sts & PIIX4_FUNC3IO_PMSTS_PWRBTN_STS)) |
| 37 | break; |
| 38 | outw(sts, io_offset + PIIX4_FUNC3IO_PMSTS); |
| 39 | } |
| 40 | |
| 41 | /* Enable entry to suspend */ |
| 42 | outw(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF | PIIX4_FUNC3IO_PMCNTRL_SUS_EN, |
| 43 | io_offset + PIIX4_FUNC3IO_PMCNTRL); |
| 44 | |
| 45 | /* If the special cycle occurs too soon this doesn't work... */ |
| 46 | mdelay(10); |
| 47 | |
| 48 | /* |
| 49 | * The PIIX4 will enter the suspend state only after seeing a special |
| 50 | * cycle with the correct magic data on the PCI bus. Generate that |
| 51 | * cycle now. |
| 52 | */ |
| 53 | spec_devid = PCI_DEVID(0, PCI_DEVFN(0x1f, 0x7)); |
| 54 | pci_bus_write_config_dword(pm_dev->bus, spec_devid, 0, |
| 55 | PIIX4_SUSPEND_MAGIC); |
| 56 | |
| 57 | /* Give the system some time to power down, then error */ |
| 58 | mdelay(1000); |
| 59 | pr_emerg("Unable to poweroff system\n"); |
| 60 | } |
| 61 | |
| 62 | static int piix4_poweroff_probe(struct pci_dev *dev, |
| 63 | const struct pci_device_id *id) |
| 64 | { |
| 65 | int res; |
| 66 | |
| 67 | if (pm_dev) |
| 68 | return -EINVAL; |
| 69 | |
| 70 | /* Request access to the PIIX4 PM IO registers */ |
| 71 | res = pci_request_region(dev, piix4_pm_io_region, |
| 72 | "PIIX4 PM IO registers"); |
| 73 | if (res) { |
| 74 | dev_err(&dev->dev, "failed to request PM IO registers: %d\n", |
| 75 | res); |
| 76 | return res; |
| 77 | } |
| 78 | |
| 79 | pm_dev = dev; |
| 80 | io_offset = pci_resource_start(dev, piix4_pm_io_region); |
| 81 | pm_power_off = piix4_poweroff; |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | static void piix4_poweroff_remove(struct pci_dev *dev) |
| 87 | { |
| 88 | if (pm_power_off == piix4_poweroff) |
| 89 | pm_power_off = NULL; |
| 90 | |
| 91 | pci_release_region(dev, piix4_pm_io_region); |
| 92 | pm_dev = NULL; |
| 93 | } |
| 94 | |
| 95 | static const struct pci_device_id piix4_poweroff_ids[] = { |
| 96 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, |
| 97 | { 0 }, |
| 98 | }; |
| 99 | |
| 100 | static struct pci_driver piix4_poweroff_driver = { |
| 101 | .name = "piix4-poweroff", |
| 102 | .id_table = piix4_poweroff_ids, |
| 103 | .probe = piix4_poweroff_probe, |
| 104 | .remove = piix4_poweroff_remove, |
| 105 | }; |
| 106 | |
| 107 | module_pci_driver(piix4_poweroff_driver); |
Paul Burton | fb615d6 | 2017-10-25 17:04:33 -0700 | [diff] [blame] | 108 | MODULE_AUTHOR("Paul Burton <paul.burton@mips.com>"); |
Paul Burton | 2967683 | 2016-09-28 16:30:56 +0100 | [diff] [blame] | 109 | MODULE_LICENSE("GPL"); |