drivers/staging/panel/panel.c

/*
 * Front panel driver for Linux
 * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad)
 * connected to a parallel printer port.
 *
 * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit
 * serial module compatible with Samsung's KS0074. The pins may be connected in
 * any combination, everything is programmable.
 *
 * The keypad consists in a matrix of push buttons connecting input pins to
 * data output pins or to the ground. The combinations have to be hard-coded
 * in the driver, though several profiles exist and adding new ones is easy.
 *
 * Several profiles are provided for commonly found LCD+keypad modules on the
 * market, such as those found in Nexcom's appliances.
 *
 * FIXME:
 *      - the initialization/deinitialization process is very dirty and should
 *        be rewritten. It may even be buggy.
 *
 * TODO:
 *	- document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs)
 *      - make the LCD a part of a virtual screen of Vx*Vy
 *	- make the inputs list smp-safe
 *      - change the keyboard to a double mapping : signals -> key_id -> values
 *        so that applications can change values without knowing signals
 *
 */

#include <linux/module.h>

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/parport.h>
#include <linux/version.h>
#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/utsrelease.h>

#include <linux/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>

#define LCD_MINOR		156
#define KEYPAD_MINOR		185

#define PANEL_VERSION		"0.9.5"

#define LCD_MAXBYTES		256	/* max burst write */

#define KEYPAD_BUFFER		64
#define INPUT_POLL_TIME		(HZ/50)	/* poll the keyboard this every second */
#define KEYPAD_REP_START	(10)	/* a key starts to repeat after this times INPUT_POLL_TIME */
#define KEYPAD_REP_DELAY	(2)	/* a key repeats this times INPUT_POLL_TIME */

#define FLASH_LIGHT_TEMPO	(200)	/* keep the light on this times INPUT_POLL_TIME for each flash */

/* converts an r_str() input to an active high, bits string : 000BAOSE */
#define PNL_PINPUT(a)		((((unsigned char)(a)) ^ 0x7F) >> 3)

#define PNL_PBUSY		0x80	/* inverted input, active low */
#define PNL_PACK		0x40	/* direct input, active low */
#define PNL_POUTPA		0x20	/* direct input, active high */
#define PNL_PSELECD		0x10	/* direct input, active high */
#define PNL_PERRORP		0x08	/* direct input, active low */

#define PNL_PBIDIR		0x20	/* bi-directional ports */
#define PNL_PINTEN		0x10	/* high to read data in or-ed with data out */
#define PNL_PSELECP		0x08	/* inverted output, active low */
#define PNL_PINITP		0x04	/* direct output, active low */
#define PNL_PAUTOLF		0x02	/* inverted output, active low */
#define PNL_PSTROBE		0x01	/* inverted output */

#define PNL_PD0			0x01
#define PNL_PD1			0x02
#define PNL_PD2			0x04
#define PNL_PD3			0x08
#define PNL_PD4			0x10
#define PNL_PD5			0x20
#define PNL_PD6			0x40
#define PNL_PD7			0x80

#define PIN_NONE		0
#define PIN_STROBE		1
#define PIN_D0			2
#define PIN_D1			3
#define PIN_D2			4
#define PIN_D3			5
#define PIN_D4			6
#define PIN_D5			7
#define PIN_D6			8
#define PIN_D7			9
#define PIN_AUTOLF		14
#define PIN_INITP		16
#define PIN_SELECP		17
#define PIN_NOT_SET		127

#define LCD_FLAG_S		0x0001
#define LCD_FLAG_ID		0x0002
#define LCD_FLAG_B		0x0004	/* blink on */
#define LCD_FLAG_C		0x0008	/* cursor on */
#define LCD_FLAG_D		0x0010	/* display on */
#define LCD_FLAG_F		0x0020	/* large font mode */
#define LCD_FLAG_N		0x0040	/* 2-rows mode */
#define LCD_FLAG_L		0x0080	/* backlight enabled */

#define LCD_ESCAPE_LEN		24	/* 24 chars max for an LCD escape command */
#define LCD_ESCAPE_CHAR	27	/* use char 27 for escape command */

/* macros to simplify use of the parallel port */
#define r_ctr(x)        (parport_read_control((x)->port))
#define r_dtr(x)        (parport_read_data((x)->port))
#define r_str(x)        (parport_read_status((x)->port))
#define w_ctr(x, y)     do { parport_write_control((x)->port, (y)); } while (0)
#define w_dtr(x, y)     do { parport_write_data((x)->port, (y)); } while (0)

/* this defines which bits are to be used and which ones to be ignored */
static __u8 scan_mask_o;	/* logical or of the output bits involved in the scan matrix */
static __u8 scan_mask_i;	/* logical or of the input bits involved in the scan matrix */

typedef __u64 pmask_t;

enum input_type {
	INPUT_TYPE_STD,
	INPUT_TYPE_KBD,
};

enum input_state {
	INPUT_ST_LOW,
	INPUT_ST_RISING,
	INPUT_ST_HIGH,
	INPUT_ST_FALLING,
};

struct logical_input {
	struct list_head list;
	pmask_t mask;
	pmask_t value;
	enum input_type type;
	enum input_state state;
	__u8 rise_time, fall_time;
	__u8 rise_timer, fall_timer, high_timer;

	union {
		struct {	/* this structure is valid when type == INPUT_TYPE_STD */
			void (*press_fct) (int);
			void (*release_fct) (int);
			int press_data;
			int release_data;
		} std;
		struct {	/* this structure is valid when type == INPUT_TYPE_KBD */
			/* strings can be full-length (ie. non null-terminated) */
			char press_str[sizeof(void *) + sizeof(int)];
			char repeat_str[sizeof(void *) + sizeof(int)];
			char release_str[sizeof(void *) + sizeof(int)];
		} kbd;
	} u;
};

LIST_HEAD(logical_inputs);	/* list of all defined logical inputs */

/* physical contacts history
 * Physical contacts are a 45 bits string of 9 groups of 5 bits each.
 * The 8 lower groups correspond to output bits 0 to 7, and the 9th group
 * corresponds to the ground.
 * Within each group, bits are stored in the same order as read on the port :
 * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0).
 * So, each __u64 (or pmask_t) is represented like this :
 * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
 * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
 */
static pmask_t phys_read;	/* what has just been read from the I/O ports */
static pmask_t phys_read_prev;	/* previous phys_read */
static pmask_t phys_curr;	/* stabilized phys_read (phys_read|phys_read_prev) */
static pmask_t phys_prev;	/* previous phys_curr */
static char inputs_stable;	/* 0 means that at least one logical signal needs be computed */

/* these variables are specific to the keypad */
static char keypad_buffer[KEYPAD_BUFFER];
static int keypad_buflen;
static int keypad_start;
static char keypressed;
static wait_queue_head_t keypad_read_wait;

/* lcd-specific variables */
static unsigned long int lcd_flags;	/* contains the LCD config state */
static unsigned long int lcd_addr_x;	/* contains the LCD X offset */
static unsigned long int lcd_addr_y;	/* contains the LCD Y offset */
static char lcd_escape[LCD_ESCAPE_LEN + 1];	/* current escape sequence, 0 terminated */
static int lcd_escape_len = -1;	/* not in escape state. >=0 = escape cmd len */

/*
 * Bit masks to convert LCD signals to parallel port outputs.
 * _d_ are values for data port, _c_ are for control port.
 * [0] = signal OFF, [1] = signal ON, [2] = mask
 */
#define BIT_CLR		0
#define BIT_SET		1
#define BIT_MSK		2
#define BIT_STATES	3
/*
 * one entry for each bit on the LCD
 */
#define LCD_BIT_E	0
#define LCD_BIT_RS	1
#define LCD_BIT_RW	2
#define LCD_BIT_BL	3
#define LCD_BIT_CL	4
#define LCD_BIT_DA	5
#define LCD_BITS	6

/*
 * each bit can be either connected to a DATA or CTRL port
 */
#define LCD_PORT_C	0
#define LCD_PORT_D	1
#define LCD_PORTS	2

static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];

/*
 * LCD protocols
 */
#define LCD_PROTO_PARALLEL      0
#define LCD_PROTO_SERIAL        1

/*
 * LCD character sets
 */
#define LCD_CHARSET_NORMAL      0
#define LCD_CHARSET_KS0074      1

/*
 * LCD types
 */
#define LCD_TYPE_NONE		0
#define LCD_TYPE_OLD		1
#define LCD_TYPE_KS0074		2
#define LCD_TYPE_HANTRONIX	3
#define LCD_TYPE_NEXCOM		4
#define LCD_TYPE_CUSTOM		5

/*
 * keypad types
 */
#define KEYPAD_TYPE_NONE	0
#define KEYPAD_TYPE_OLD		1
#define KEYPAD_TYPE_NEW		2
#define KEYPAD_TYPE_NEXCOM	3

/*
 * panel profiles
 */
#define PANEL_PROFILE_CUSTOM	0
#define PANEL_PROFILE_OLD	1
#define PANEL_PROFILE_NEW	2
#define PANEL_PROFILE_HANTRONIX	3
#define PANEL_PROFILE_NEXCOM	4
#define PANEL_PROFILE_LARGE	5

/*
 * Construct custom config from the kernel's configuration
 */
#define DEFAULT_PROFILE         PANEL_PROFILE_LARGE
#define DEFAULT_PARPORT         0
#define DEFAULT_LCD             LCD_TYPE_OLD
#define DEFAULT_KEYPAD          KEYPAD_TYPE_OLD
#define DEFAULT_LCD_WIDTH       40
#define DEFAULT_LCD_BWIDTH      40
#define DEFAULT_LCD_HWIDTH      64
#define DEFAULT_LCD_HEIGHT      2
#define DEFAULT_LCD_PROTO       LCD_PROTO_PARALLEL

#define DEFAULT_LCD_PIN_E       PIN_AUTOLF
#define DEFAULT_LCD_PIN_RS      PIN_SELECP
#define DEFAULT_LCD_PIN_RW      PIN_INITP
#define DEFAULT_LCD_PIN_SCL     PIN_STROBE
#define DEFAULT_LCD_PIN_SDA     PIN_D0
#define DEFAULT_LCD_PIN_BL      PIN_NOT_SET
#define DEFAULT_LCD_CHARSET     LCD_CHARSET_NORMAL

#ifdef CONFIG_PANEL_PROFILE
#undef DEFAULT_PROFILE
#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
#endif

#ifdef CONFIG_PANEL_PARPORT
#undef DEFAULT_PARPORT
#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
#endif

#if DEFAULT_PROFILE == 0	/* custom */
#ifdef CONFIG_PANEL_KEYPAD
#undef DEFAULT_KEYPAD
#define DEFAULT_KEYPAD CONFIG_PANEL_KEYPAD
#endif

#ifdef CONFIG_PANEL_LCD
#undef DEFAULT_LCD
#define DEFAULT_LCD CONFIG_PANEL_LCD
#endif

#ifdef CONFIG_PANEL_LCD_WIDTH
#undef DEFAULT_LCD_WIDTH
#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH
#endif

#ifdef CONFIG_PANEL_LCD_BWIDTH
#undef DEFAULT_LCD_BWIDTH
#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH
#endif

#ifdef CONFIG_PANEL_LCD_HWIDTH
#undef DEFAULT_LCD_HWIDTH
#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
#endif

#ifdef CONFIG_PANEL_LCD_HEIGHT
#undef DEFAULT_LCD_HEIGHT
#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
#endif

#ifdef CONFIG_PANEL_LCD_PROTO
#undef DEFAULT_LCD_PROTO
#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO
#endif

#ifdef CONFIG_PANEL_LCD_PIN_E
#undef DEFAULT_LCD_PIN_E
#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E
#endif

#ifdef CONFIG_PANEL_LCD_PIN_RS
#undef DEFAULT_LCD_PIN_RS
#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS
#endif

#ifdef CONFIG_PANEL_LCD_PIN_RW
#undef DEFAULT_LCD_PIN_RW
#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW
#endif

#ifdef CONFIG_PANEL_LCD_PIN_SCL
#undef DEFAULT_LCD_PIN_SCL
#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL
#endif

#ifdef CONFIG_PANEL_LCD_PIN_SDA
#undef DEFAULT_LCD_PIN_SDA
#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA
#endif

#ifdef CONFIG_PANEL_LCD_PIN_BL
#undef DEFAULT_LCD_PIN_BL
#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
#endif

#ifdef CONFIG_PANEL_LCD_CHARSET
#undef DEFAULT_LCD_CHARSET
#define DEFAULT_LCD_CHARSET
#endif

#endif /* DEFAULT_PROFILE == 0 */

/* global variables */
static int keypad_open_cnt;	/* #times opened */
static int lcd_open_cnt;	/* #times opened */
static struct pardevice *pprt;

static int lcd_initialized;
static int keypad_initialized;

static int light_tempo;

static char lcd_must_clear;
static char lcd_left_shift;
static char init_in_progress;

static void (*lcd_write_cmd) (int);
static void (*lcd_write_data) (int);
static void (*lcd_clear_fast) (void);

static DEFINE_SPINLOCK(pprt_lock);
static struct timer_list scan_timer;

MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");

static int parport = -1;
module_param(parport, int, 0000);
MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");

static int lcd_height = -1;
module_param(lcd_height, int, 0000);
MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");

static int lcd_width = -1;
module_param(lcd_width, int, 0000);
MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD");

static int lcd_bwidth = -1;	/* internal buffer width (usually 40) */
module_param(lcd_bwidth, int, 0000);
MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)");

static int lcd_hwidth = -1;	/* hardware buffer width (usually 64) */
module_param(lcd_hwidth, int, 0000);
MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");

static int lcd_enabled = -1;
module_param(lcd_enabled, int, 0000);
MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");

static int keypad_enabled = -1;
module_param(keypad_enabled, int, 0000);
MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");

static int lcd_type = -1;
module_param(lcd_type, int, 0000);
MODULE_PARM_DESC(lcd_type,
		 "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");

static int lcd_proto = -1;
module_param(lcd_proto, int, 0000);
MODULE_PARM_DESC(lcd_proto, "LCD communication: 0=parallel (//), 1=serial");

static int lcd_charset = -1;
module_param(lcd_charset, int, 0000);
MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");

static int keypad_type = -1;
module_param(keypad_type, int, 0000);
MODULE_PARM_DESC(keypad_type,
		 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");

static int profile = DEFAULT_PROFILE;
module_param(profile, int, 0000);
MODULE_PARM_DESC(profile,
		 "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; 4=16x2 nexcom; default=40x2, old kp");

/*
 * These are the parallel port pins the LCD control signals are connected to.
 * Set this to 0 if the signal is not used. Set it to its opposite value
 * (negative) if the signal is negated. -MAXINT is used to indicate that the
 * pin has not been explicitly specified.
 *
 * WARNING! no check will be performed about collisions with keypad !
 */

static int lcd_e_pin  = PIN_NOT_SET;
module_param(lcd_e_pin, int, 0000);
MODULE_PARM_DESC(lcd_e_pin,
		 "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");

static int lcd_rs_pin = PIN_NOT_SET;
module_param(lcd_rs_pin, int, 0000);
MODULE_PARM_DESC(lcd_rs_pin,
		 "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");

static int lcd_rw_pin = PIN_NOT_SET;
module_param(lcd_rw_pin, int, 0000);
MODULE_PARM_DESC(lcd_rw_pin,
		 "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");

static int lcd_bl_pin = PIN_NOT_SET;
module_param(lcd_bl_pin, int, 0000);
MODULE_PARM_DESC(lcd_bl_pin,
		 "# of the // port pin connected to LCD backlight, with polarity (-17..17)");

static int lcd_da_pin = PIN_NOT_SET;
module_param(lcd_da_pin, int, 0000);
MODULE_PARM_DESC(lcd_da_pin,
		 "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");

static int lcd_cl_pin = PIN_NOT_SET;
module_param(lcd_cl_pin, int, 0000);
MODULE_PARM_DESC(lcd_cl_pin,
		 "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");

static unsigned char *lcd_char_conv;

/* for some LCD drivers (ks0074) we need a charset conversion table. */
static unsigned char lcd_char_conv_ks0074[256] = {
	/*          0|8   1|9   2|A   3|B   4|C   5|D   6|E   7|F */
	/* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
	/* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
	/* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
	/* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
	/* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27,
	/* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
	/* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
	/* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
	/* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
	/* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
	/* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
	/* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4,
	/* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
	/* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
	/* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
	/* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20,
	/* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
	/* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
	/* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
	/* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
	/* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f,
	/* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96,
	/* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd,
	/* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60,
	/* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9,
	/* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3,
	/* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78,
	/* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe,
	/* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8,
	/* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69,
	/* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25,
	/* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79,
};

char old_keypad_profile[][4][9] = {
	{"S0", "Left\n", "Left\n", ""},
	{"S1", "Down\n", "Down\n", ""},
	{"S2", "Up\n", "Up\n", ""},
	{"S3", "Right\n", "Right\n", ""},
	{"S4", "Esc\n", "Esc\n", ""},
	{"S5", "Ret\n", "Ret\n", ""},
	{"", "", "", ""}
};

/* signals, press, repeat, release */
char new_keypad_profile[][4][9] = {
	{"S0", "Left\n", "Left\n", ""},
	{"S1", "Down\n", "Down\n", ""},
	{"S2", "Up\n", "Up\n", ""},
	{"S3", "Right\n", "Right\n", ""},
	{"S4s5", "", "Esc\n", "Esc\n"},
	{"s4S5", "", "Ret\n", "Ret\n"},
	{"S4S5", "Help\n", "", ""},
	/* add new signals above this line */
	{"", "", "", ""}
};

/* signals, press, repeat, release */
char nexcom_keypad_profile[][4][9] = {
	{"a-p-e-", "Down\n", "Down\n", ""},
	{"a-p-E-", "Ret\n", "Ret\n", ""},
	{"a-P-E-", "Esc\n", "Esc\n", ""},
	{"a-P-e-", "Up\n", "Up\n", ""},
	/* add new signals above this line */
	{"", "", "", ""}
};

static char (*keypad_profile)[4][9] = old_keypad_profile;

/* FIXME: this should be converted to a bit array containing signals states */
static struct {
	unsigned char e;	/* parallel LCD E   (data latch on falling edge) */
	unsigned char rs;	/* parallel LCD RS  (0 = cmd, 1 = data) */
	unsigned char rw;	/* parallel LCD R/W (0 = W, 1 = R) */
	unsigned char bl;	/* parallel LCD backlight (0 = off, 1 = on) */
	unsigned char cl;	/* serial LCD clock (latch on rising edge) */
	unsigned char da;	/* serial LCD data */
} bits;

static void init_scan_timer(void);

/* sets data port bits according to current signals values */
static int set_data_bits(void)
{
	int val, bit;

	val = r_dtr(pprt);
	for (bit = 0; bit < LCD_BITS; bit++)
		val &= lcd_bits[LCD_PORT_D][bit][BIT_MSK];

	val |= lcd_bits[LCD_PORT_D][LCD_BIT_E][bits.e]
	    | lcd_bits[LCD_PORT_D][LCD_BIT_RS][bits.rs]
	    | lcd_bits[LCD_PORT_D][LCD_BIT_RW][bits.rw]
	    | lcd_bits[LCD_PORT_D][LCD_BIT_BL][bits.bl]
	    | lcd_bits[LCD_PORT_D][LCD_BIT_CL][bits.cl]
	    | lcd_bits[LCD_PORT_D][LCD_BIT_DA][bits.da];

	w_dtr(pprt, val);
	return val;
}

/* sets ctrl port bits according to current signals values */
static int set_ctrl_bits(void)
{
	int val, bit;

	val = r_ctr(pprt);
	for (bit = 0; bit < LCD_BITS; bit++)
		val &= lcd_bits[LCD_PORT_C][bit][BIT_MSK];

	val |= lcd_bits[LCD_PORT_C][LCD_BIT_E][bits.e]
	    | lcd_bits[LCD_PORT_C][LCD_BIT_RS][bits.rs]
	    | lcd_bits[LCD_PORT_C][LCD_BIT_RW][bits.rw]
	    | lcd_bits[LCD_PORT_C][LCD_BIT_BL][bits.bl]
	    | lcd_bits[LCD_PORT_C][LCD_BIT_CL][bits.cl]
	    | lcd_bits[LCD_PORT_C][LCD_BIT_DA][bits.da];

	w_ctr(pprt, val);
	return val;
}

/* sets ctrl & data port bits according to current signals values */
static void set_bits(void)
{
	set_data_bits();
	set_ctrl_bits();
}

/*
 * Converts a parallel port pin (from -25 to 25) to data and control ports
 * masks, and data and control port bits. The signal will be considered
 * unconnected if it's on pin 0 or an invalid pin (<-25 or >25).
 *
 * Result will be used this way :
 *   out(dport, in(dport) & d_val[2] | d_val[signal_state])
 *   out(cport, in(cport) & c_val[2] | c_val[signal_state])
 */
void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val)
{
	int d_bit, c_bit, inv;

	d_val[0] = c_val[0] = d_val[1] = c_val[1] = 0;
	d_val[2] = c_val[2] = 0xFF;

	if (pin == 0)
		return;

	inv = (pin < 0);
	if (inv)
		pin = -pin;

	d_bit = c_bit = 0;

	switch (pin) {
	case PIN_STROBE:	/* strobe, inverted */
		c_bit = PNL_PSTROBE;
		inv = !inv;
		break;
	case PIN_D0...PIN_D7:	/* D0 - D7 = 2 - 9 */
		d_bit = 1 << (pin - 2);
		break;
	case PIN_AUTOLF:	/* autofeed, inverted */
		c_bit = PNL_PAUTOLF;
		inv = !inv;
		break;
	case PIN_INITP:	/* init, direct */
		c_bit = PNL_PINITP;
		break;
	case PIN_SELECP:	/* select_in, inverted */
		c_bit = PNL_PSELECP;
		inv = !inv;
		break;
	default:		/* unknown pin, ignore */
		break;
	}

	if (c_bit) {
		c_val[2] &= ~c_bit;
		c_val[!inv] = c_bit;
	} else if (d_bit) {
		d_val[2] &= ~d_bit;
		d_val[!inv] = d_bit;
	}
}

/* sleeps that many milliseconds with a reschedule */
static void long_sleep(int ms)
{

	if (in_interrupt())
		mdelay(ms);
	else {
		current->state = TASK_INTERRUPTIBLE;
		schedule_timeout((ms * HZ + 999) / 1000);
	}
}

/* send a serial byte to the LCD panel. The caller is responsible for locking if needed. */
static void lcd_send_serial(int byte)
{
	int bit;

	/* the data bit is set on D0, and the clock on STROBE.
	 * LCD reads D0 on STROBE's rising edge.
	 */
	for (bit = 0; bit < 8; bit++) {
		bits.cl = BIT_CLR;	/* CLK low */
		set_bits();
		bits.da = byte & 1;
		set_bits();
		udelay(2);	/* maintain the data during 2 us before CLK up */
		bits.cl = BIT_SET;	/* CLK high */
		set_bits();
		udelay(1);	/* maintain the strobe during 1 us */
		byte >>= 1;
	}
}

/* turn the backlight on or off */
static void lcd_backlight(int on)
{
	if (lcd_bl_pin == PIN_NONE)
		return;

	/* The backlight is activated by seting the AUTOFEED line to +5V  */
	spin_lock(&pprt_lock);
	bits.bl = on;
	set_bits();
	spin_unlock(&pprt_lock);
}

/* send a command to the LCD panel in serial mode */
static void lcd_write_cmd_s(int cmd)
{
	spin_lock(&pprt_lock);
	lcd_send_serial(0x1F);	/* R/W=W, RS=0 */
	lcd_send_serial(cmd & 0x0F);
	lcd_send_serial((cmd >> 4) & 0x0F);
	udelay(40);		/* the shortest command takes at least 40 us */
	spin_unlock(&pprt_lock);
}

/* send data to the LCD panel in serial mode */
static void lcd_write_data_s(int data)
{
	spin_lock(&pprt_lock);
	lcd_send_serial(0x5F);	/* R/W=W, RS=1 */
	lcd_send_serial(data & 0x0F);
	lcd_send_serial((data >> 4) & 0x0F);
	udelay(40);		/* the shortest data takes at least 40 us */
	spin_unlock(&pprt_lock);
}

/* send a command to the LCD panel in 8 bits parallel mode */
static void lcd_write_cmd_p8(int cmd)
{
	spin_lock(&pprt_lock);
	/* present the data to the data port */
	w_dtr(pprt, cmd);
	udelay(20);		/* maintain the data during 20 us before the strobe */

	bits.e = BIT_SET;
	bits.rs = BIT_CLR;
	bits.rw = BIT_CLR;
	set_ctrl_bits();

	udelay(40);		/* maintain the strobe during 40 us */

	bits.e = BIT_CLR;
	set_ctrl_bits();

	udelay(120);		/* the shortest command takes at least 120 us */
	spin_unlock(&pprt_lock);
}

/* send data to the LCD panel in 8 bits parallel mode */
static void lcd_write_data_p8(int data)
{
	spin_lock(&pprt_lock);
	/* present the data to the data port */
	w_dtr(pprt, data);
	udelay(20);		/* maintain the data during 20 us before the strobe */

	bits.e = BIT_SET;
	bits.rs = BIT_SET;
	bits.rw = BIT_CLR;
	set_ctrl_bits();

	udelay(40);		/* maintain the strobe during 40 us */

	bits.e = BIT_CLR;
	set_ctrl_bits();

	udelay(45);		/* the shortest data takes at least 45 us */
	spin_unlock(&pprt_lock);
}

static void lcd_gotoxy(void)
{
	lcd_write_cmd(0x80	/* set DDRAM address */
		      | (lcd_addr_y ? lcd_hwidth : 0)
		      /* we force the cursor to stay at the end of the line if it wants to go farther */
		      | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x &
			 (lcd_hwidth - 1) : lcd_bwidth - 1));
}

static void lcd_print(char c)
{
	if (lcd_addr_x < lcd_bwidth) {
		if (lcd_char_conv != NULL)
			c = lcd_char_conv[(unsigned char)c];
		lcd_write_data(c);
		lcd_addr_x++;
	}
	/* prevents the cursor from wrapping onto the next line */
	if (lcd_addr_x == lcd_bwidth)
		lcd_gotoxy();
}

/* fills the display with spaces and resets X/Y */
static void lcd_clear_fast_s(void)
{
	int pos;
	lcd_addr_x = lcd_addr_y = 0;
	lcd_gotoxy();

	spin_lock(&pprt_lock);
	for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
		lcd_send_serial(0x5F);	/* R/W=W, RS=1 */
		lcd_send_serial(' ' & 0x0F);
		lcd_send_serial((' ' >> 4) & 0x0F);
		udelay(40);	/* the shortest data takes at least 40 us */
	}
	spin_unlock(&pprt_lock);

	lcd_addr_x = lcd_addr_y = 0;
	lcd_gotoxy();
}

/* fills the display with spaces and resets X/Y */
static void lcd_clear_fast_p8(void)
{
	int pos;
	lcd_addr_x = lcd_addr_y = 0;
	lcd_gotoxy();

	spin_lock(&pprt_lock);
	for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
		/* present the data to the data port */
		w_dtr(pprt, ' ');
		udelay(20);	/* maintain the data during 20 us before the strobe */

		bits.e = BIT_SET;
		bits.rs = BIT_SET;
		bits.rw = BIT_CLR;
		set_ctrl_bits();

		udelay(40);	/* maintain the strobe during 40 us */

		bits.e = BIT_CLR;
		set_ctrl_bits();

		udelay(45);	/* the shortest data takes at least 45 us */
	}
	spin_unlock(&pprt_lock);

	lcd_addr_x = lcd_addr_y = 0;
	lcd_gotoxy();
}

/* clears the display and resets X/Y */
static void lcd_clear_display(void)
{
	lcd_write_cmd(0x01);	/* clear display */
	lcd_addr_x = lcd_addr_y = 0;
	/* we must wait a few milliseconds (15) */
	long_sleep(15);
}

static void lcd_init_display(void)
{

	lcd_flags = ((lcd_height > 1) ? LCD_FLAG_N : 0)
	    | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B;

	long_sleep(20);		/* wait 20 ms after power-up for the paranoid */

	lcd_write_cmd(0x30);	/* 8bits, 1 line, small fonts */
	long_sleep(10);
	lcd_write_cmd(0x30);	/* 8bits, 1 line, small fonts */
	long_sleep(10);
	lcd_write_cmd(0x30);	/* 8bits, 1 line, small fonts */
	long_sleep(10);

	lcd_write_cmd(0x30	/* set font height and lines number */
		      | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
		      | ((lcd_flags & LCD_FLAG_N) ? 8 : 0)
	    );
	long_sleep(10);

	lcd_write_cmd(0x08);	/* display off, cursor off, blink off */
	long_sleep(10);

	lcd_write_cmd(0x08	/* set display mode */
		      | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
		      | ((lcd_flags & LCD_FLAG_C) ? 2 : 0)
		      | ((lcd_flags & LCD_FLAG_B) ? 1 : 0)
	    );

	lcd_backlight((lcd_flags & LCD_FLAG_L) ? 1 : 0);

	long_sleep(10);

	lcd_write_cmd(0x06);	/* entry mode set : increment, cursor shifting */

	lcd_clear_display();
}

/*
 * These are the file operation function for user access to /dev/lcd
 * This function can also be called from inside the kernel, by
 * setting file and ppos to NULL.
 *
 */

static ssize_t lcd_write(struct file *file,
			 const char *buf, size_t count, loff_t *ppos)
{

	const char *tmp = buf;
	char c;

	for (; count-- > 0; (ppos ? (*ppos)++ : 0), ++tmp) {
		if (!in_interrupt() && (((count + 1) & 0x1f) == 0))
			schedule();	/* let's be a little nice with other processes that need some CPU */

		if (ppos == NULL && file == NULL)
			c = *tmp;	/* let's not use get_user() from the kernel ! */
		else if (get_user(c, tmp))
			return -EFAULT;

		/* first, we'll test if we're in escape mode */
		if ((c != '\n') && lcd_escape_len >= 0) {	/* yes, let's add this char to the buffer */
			lcd_escape[lcd_escape_len++] = c;
			lcd_escape[lcd_escape_len] = 0;
		} else {
			lcd_escape_len = -1;	/* aborts any previous escape sequence */

			switch (c) {
			case LCD_ESCAPE_CHAR:	/* start of an escape sequence */
				lcd_escape_len = 0;
				lcd_escape[lcd_escape_len] = 0;
				break;
			case '\b':	/* go back one char and clear it */
				if (lcd_addr_x > 0) {
					if (lcd_addr_x < lcd_bwidth)	/* check if we're not at the end of the line */
						lcd_write_cmd(0x10);	/* back one char */
					lcd_addr_x--;
				}
				lcd_write_data(' ');	/* replace with a space */
				lcd_write_cmd(0x10);	/* back one char again */
				break;
			case '\014':	/* quickly clear the display */
				lcd_clear_fast();
				break;
			case '\n':	/* flush the remainder of the current line and go to the
					   beginning of the next line */
				for (; lcd_addr_x < lcd_bwidth; lcd_addr_x++)
					lcd_write_data(' ');
				lcd_addr_x = 0;
				lcd_addr_y = (lcd_addr_y + 1) % lcd_height;
				lcd_gotoxy();
				break;
			case '\r':	/* go to the beginning of the same line */
				lcd_addr_x = 0;
				lcd_gotoxy();
				break;
			case '\t':	/* print a space instead of the tab */
				lcd_print(' ');
				break;
			default:	/* simply print this char */
				lcd_print(c);
				break;
			}
		}

		/* now we'll see if we're in an escape mode and if the current
		   escape sequence can be understood.
		 */
		if (lcd_escape_len >= 2) {	/* minimal length for an escape command */
			int processed = 0;	/* 1 means the command has been processed */

			if (!strcmp(lcd_escape, "[2J")) {	/* Clear the display */
				lcd_clear_fast();	/* clear display */
				processed = 1;
			} else if (!strcmp(lcd_escape, "[H")) {	/* Cursor to home */
				lcd_addr_x = lcd_addr_y = 0;
				lcd_gotoxy();
				processed = 1;
			}
			/* codes starting with ^[[L */
			else if ((lcd_escape_len >= 3) &&
				 (lcd_escape[0] == '[') && (lcd_escape[1] == 'L')) {	/* LCD special codes */

				char *esc = lcd_escape + 2;
				int oldflags = lcd_flags;

				/* check for display mode flags */
				switch (*esc) {
				case 'D':	/* Display ON */
					lcd_flags |= LCD_FLAG_D;
					processed = 1;
					break;
				case 'd':	/* Display OFF */
					lcd_flags &= ~LCD_FLAG_D;
					processed = 1;
					break;
				case 'C':	/* Cursor ON */
					lcd_flags |= LCD_FLAG_C;
					processed = 1;
					break;
				case 'c':	/* Cursor OFF */
					lcd_flags &= ~LCD_FLAG_C;
					processed = 1;
					break;
				case 'B':	/* Blink ON */
					lcd_flags |= LCD_FLAG_B;
					processed = 1;
					break;
				case 'b':	/* Blink OFF */
					lcd_flags &= ~LCD_FLAG_B;
					processed = 1;
					break;
				case '+':	/* Back light ON */
					lcd_flags |= LCD_FLAG_L;
					processed = 1;
					break;
				case '-':	/* Back light OFF */
					lcd_flags &= ~LCD_FLAG_L;
					processed = 1;
					break;
				case '*':	/* flash back light using the keypad timer */
					if (scan_timer.function != NULL) {
						if (light_tempo == 0
						    && ((lcd_flags & LCD_FLAG_L)
							== 0))
							lcd_backlight(1);
						light_tempo = FLASH_LIGHT_TEMPO;
					}
					processed = 1;
					break;
				case 'f':	/* Small Font */
					lcd_flags &= ~LCD_FLAG_F;
					processed = 1;
					break;
				case 'F':	/* Large Font */
					lcd_flags |= LCD_FLAG_F;
					processed = 1;
					break;
				case 'n':	/* One Line */
					lcd_flags &= ~LCD_FLAG_N;
					processed = 1;
					break;
				case 'N':	/* Two Lines */
					lcd_flags |= LCD_FLAG_N;
					break;

				case 'l':	/* Shift Cursor Left */
					if (lcd_addr_x > 0) {
						if (lcd_addr_x < lcd_bwidth)
							lcd_write_cmd(0x10);	/* back one char if not at end of line */
						lcd_addr_x--;
					}
					processed = 1;
					break;

				case 'r':	/* shift cursor right */
					if (lcd_addr_x < lcd_width) {
						if (lcd_addr_x < (lcd_bwidth - 1))
							lcd_write_cmd(0x14);	/* allow the cursor to pass the end of the line */
						lcd_addr_x++;
					}
					processed = 1;
					break;

				case 'L':	/* shift display left */
					lcd_left_shift++;
					lcd_write_cmd(0x18);
					processed = 1;
					break;

				case 'R':	/* shift display right */
					lcd_left_shift--;
					lcd_write_cmd(0x1C);
					processed = 1;
					break;

				case 'k':{	/* kill end of line */
						int x;
						for (x = lcd_addr_x; x < lcd_bwidth; x++)
							lcd_write_data(' ');
						lcd_gotoxy();	/* restore cursor position */
						processed = 1;
						break;
					}
				case 'I':	/* reinitialize display */
					lcd_init_display();
					lcd_left_shift = 0;
					processed = 1;
					break;

				case 'G':	/* Generator : LGcxxxxx...xx; */  {
						/* must have <c> between '0' and '7', representing the numerical
						 * ASCII code of the redefined character, and <xx...xx> a sequence
						 * of 16 hex digits representing 8 bytes for each character. Most
						 * LCDs will only use 5 lower bits of the 7 first bytes.
						 */

						unsigned char cgbytes[8];
						unsigned char cgaddr;
						int cgoffset;
						int shift;
						char value;
						int addr;

						if (strchr(esc, ';') == NULL)
							break;

						esc++;

						cgaddr = *(esc++) - '0';
						if (cgaddr > 7) {
							processed = 1;
							break;
						}

						cgoffset = 0;
						shift = 0;
						value = 0;
						while (*esc && cgoffset < 8) {
							shift ^= 4;
							if (*esc >= '0' && *esc <= '9')
								value |= (*esc - '0') << shift;
							else if (*esc >= 'A' && *esc <= 'Z')
								value |= (*esc - 'A' + 10) << shift;
							else if (*esc >= 'a' && *esc <= 'z')
								value |= (*esc - 'a' + 10) << shift;
							else {
								esc++;
								continue;
							}

							if (shift == 0) {
								cgbytes[cgoffset++] = value;
								value = 0;
							}

							esc++;
						}

						lcd_write_cmd(0x40 | (cgaddr * 8));
						for (addr = 0; addr < cgoffset; addr++)
							lcd_write_data(cgbytes[addr]);

						lcd_gotoxy();	/* ensures that we stop writing to CGRAM */
						processed = 1;
						break;
					}
				case 'x':	/* gotoxy : LxXXX[yYYY]; */
				case 'y':	/* gotoxy : LyYYY[xXXX]; */
					if (strchr(esc, ';') == NULL)
						break;

					while (*esc) {
						if (*esc == 'x') {
							esc++;
							lcd_addr_x = 0;
							while (isdigit(*esc)) {
								lcd_addr_x =
								    lcd_addr_x *
								    10 + (*esc -
									  '0');
								esc++;
							}
						} else if (*esc == 'y') {
							esc++;
							lcd_addr_y = 0;
							while (isdigit(*esc)) {
								lcd_addr_y =
								    lcd_addr_y *
								    10 + (*esc -
									  '0');
								esc++;
							}
						} else
							break;
					}

					lcd_gotoxy();
					processed = 1;
					break;
				}	/* end of switch */

				/* Check wether one flag was changed */
				if (oldflags != lcd_flags) {
					/* check wether one of B,C,D flags was changed */
					if ((oldflags ^ lcd_flags) &
					    (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
						/* set display mode */
						lcd_write_cmd(0x08 |
							      ((lcd_flags & LCD_FLAG_D) ? 4 : 0) |
							      ((lcd_flags & LCD_FLAG_C) ? 2 : 0) |
							      ((lcd_flags & LCD_FLAG_B) ? 1 : 0));
					/* check wether one of F,N flags was changed */
					else if ((oldflags ^ lcd_flags) &
						 (LCD_FLAG_F | LCD_FLAG_N))
						lcd_write_cmd(0x30 |
							      ((lcd_flags & LCD_FLAG_F) ? 4 : 0) |
							      ((lcd_flags & LCD_FLAG_N) ? 8 : 0));
					/* check wether L flag was changed */
					else if ((oldflags ^ lcd_flags) &
						 (LCD_FLAG_L)) {
						if (lcd_flags & (LCD_FLAG_L))
							lcd_backlight(1);
						else if (light_tempo == 0)	/* switch off the light only when the tempo lighting is gone */
							lcd_backlight(0);
					}
				}
			}

			/* LCD special escape codes */
			/* flush the escape sequence if it's been processed or if it is
			   getting too long. */
			if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN))
				lcd_escape_len = -1;
		}		/* escape codes */
	}

	return tmp - buf;
}

static int lcd_open(struct inode *inode, struct file *file)
{
	if (lcd_open_cnt)
		return -EBUSY;	/* open only once at a time */

	if (file->f_mode & FMODE_READ)	/* device is write-only */
		return -EPERM;

	if (lcd_must_clear) {
		lcd_clear_display();
		lcd_must_clear = 0;
	}
	lcd_open_cnt++;
	return 0;
}

static int lcd_release(struct inode *inode, struct file *file)
{
	lcd_open_cnt--;
	return 0;
}

static struct file_operations lcd_fops = {
	.write   = lcd_write,
	.open    = lcd_open,
	.release = lcd_release,
};

static struct miscdevice lcd_dev = {
	LCD_MINOR,
	"lcd",
	&lcd_fops
};

/* public function usable from the kernel for any purpose */
void panel_lcd_print(char *s)
{
	if (lcd_enabled && lcd_initialized)
		lcd_write(NULL, s, strlen(s), NULL);
}

/* initialize the LCD driver */
void lcd_init(void)
{
	switch (lcd_type) {
	case LCD_TYPE_OLD:	/* parallel mode, 8 bits */
		if (lcd_proto < 0)
			lcd_proto = LCD_PROTO_PARALLEL;
		if (lcd_charset < 0)
			lcd_charset = LCD_CHARSET_NORMAL;
		if (lcd_e_pin == PIN_NOT_SET)
			lcd_e_pin = PIN_STROBE;
		if (lcd_rs_pin == PIN_NOT_SET)
			lcd_rs_pin = PIN_AUTOLF;

		if (lcd_width < 0)
			lcd_width = 40;
		if (lcd_bwidth < 0)
			lcd_bwidth = 40;
		if (lcd_hwidth < 0)
			lcd_hwidth = 64;
		if (lcd_height < 0)
			lcd_height = 2;
		break;
	case LCD_TYPE_KS0074:	/* serial mode, ks0074 */
		if (lcd_proto < 0)
			lcd_proto = LCD_PROTO_SERIAL;
		if (lcd_charset < 0)
			lcd_charset = LCD_CHARSET_KS0074;
		if (lcd_bl_pin == PIN_NOT_SET)
			lcd_bl_pin = PIN_AUTOLF;
		if (lcd_cl_pin == PIN_NOT_SET)
			lcd_cl_pin = PIN_STROBE;
		if (lcd_da_pin == PIN_NOT_SET)
			lcd_da_pin = PIN_D0;

		if (lcd_width < 0)
			lcd_width = 16;
		if (lcd_bwidth < 0)
			lcd_bwidth = 40;
		if (lcd_hwidth < 0)
			lcd_hwidth = 16;
		if (lcd_height < 0)
			lcd_height = 2;
		break;
	case LCD_TYPE_NEXCOM:	/* parallel mode, 8 bits, generic */
		if (lcd_proto < 0)
			lcd_proto = LCD_PROTO_PARALLEL;
		if (lcd_charset < 0)
			lcd_charset = LCD_CHARSET_NORMAL;
		if (lcd_e_pin == PIN_NOT_SET)
			lcd_e_pin = PIN_AUTOLF;
		if (lcd_rs_pin == PIN_NOT_SET)
			lcd_rs_pin = PIN_SELECP;
		if (lcd_rw_pin == PIN_NOT_SET)
			lcd_rw_pin = PIN_INITP;

		if (lcd_width < 0)
			lcd_width = 16;
		if (lcd_bwidth < 0)
			lcd_bwidth = 40;
		if (lcd_hwidth < 0)
			lcd_hwidth = 64;
		if (lcd_height < 0)
			lcd_height = 2;
		break;
	case LCD_TYPE_CUSTOM:	/* customer-defined */
		if (lcd_proto < 0)
			lcd_proto = DEFAULT_LCD_PROTO;
		if (lcd_charset < 0)
			lcd_charset = DEFAULT_LCD_CHARSET;
		/* default geometry will be set later */
		break;
	case LCD_TYPE_HANTRONIX:	/* parallel mode, 8 bits, hantronix-like */
	default:
		if (lcd_proto < 0)
			lcd_proto = LCD_PROTO_PARALLEL;
		if (lcd_charset < 0)
			lcd_charset = LCD_CHARSET_NORMAL;
		if (lcd_e_pin == PIN_NOT_SET)
			lcd_e_pin = PIN_STROBE;
		if (lcd_rs_pin == PIN_NOT_SET)
			lcd_rs_pin = PIN_SELECP;

		if (lcd_width < 0)
			lcd_width = 16;
		if (lcd_bwidth < 0)
			lcd_bwidth = 40;
		if (lcd_hwidth < 0)
			lcd_hwidth = 64;
		if (lcd_height < 0)
			lcd_height = 2;
		break;
	}

	/* this is used to catch wrong and default values */
	if (lcd_width <= 0)
		lcd_width = DEFAULT_LCD_WIDTH;
	if (lcd_bwidth <= 0)
		lcd_bwidth = DEFAULT_LCD_BWIDTH;
	if (lcd_hwidth <= 0)
		lcd_hwidth = DEFAULT_LCD_HWIDTH;
	if (lcd_height <= 0)
		lcd_height = DEFAULT_LCD_HEIGHT;

	if (lcd_proto == LCD_PROTO_SERIAL) {	/* SERIAL */
		lcd_write_cmd = lcd_write_cmd_s;
		lcd_write_data = lcd_write_data_s;
		lcd_clear_fast = lcd_clear_fast_s;

		if (lcd_cl_pin == PIN_NOT_SET)
			lcd_cl_pin = DEFAULT_LCD_PIN_SCL;
		if (lcd_da_pin == PIN_NOT_SET)
			lcd_da_pin = DEFAULT_LCD_PIN_SDA;

	} else {		/* PARALLEL */
		lcd_write_cmd = lcd_write_cmd_p8;
		lcd_write_data = lcd_write_data_p8;
		lcd_clear_fast = lcd_clear_fast_p8;

		if (lcd_e_pin == PIN_NOT_SET)
			lcd_e_pin = DEFAULT_LCD_PIN_E;
		if (lcd_rs_pin == PIN_NOT_SET)
			lcd_rs_pin = DEFAULT_LCD_PIN_RS;
		if (lcd_rw_pin == PIN_NOT_SET)
			lcd_rw_pin = DEFAULT_LCD_PIN_RW;
	}

	if (lcd_bl_pin == PIN_NOT_SET)
		lcd_bl_pin = DEFAULT_LCD_PIN_BL;

	if (lcd_e_pin == PIN_NOT_SET)
		lcd_e_pin = PIN_NONE;
	if (lcd_rs_pin == PIN_NOT_SET)
		lcd_rs_pin = PIN_NONE;
	if (lcd_rw_pin == PIN_NOT_SET)
		lcd_rw_pin = PIN_NONE;
	if (lcd_bl_pin == PIN_NOT_SET)
		lcd_bl_pin = PIN_NONE;
	if (lcd_cl_pin == PIN_NOT_SET)
		lcd_cl_pin = PIN_NONE;
	if (lcd_da_pin == PIN_NOT_SET)
		lcd_da_pin = PIN_NONE;

	if (lcd_charset < 0)
		lcd_charset = DEFAULT_LCD_CHARSET;

	if (lcd_charset == LCD_CHARSET_KS0074)
		lcd_char_conv = lcd_char_conv_ks0074;
	else
		lcd_char_conv = NULL;

	if (lcd_bl_pin != PIN_NONE)
		init_scan_timer();

	pin_to_bits(lcd_e_pin, lcd_bits[LCD_PORT_D][LCD_BIT_E],
		    lcd_bits[LCD_PORT_C][LCD_BIT_E]);
	pin_to_bits(lcd_rs_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
		    lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
	pin_to_bits(lcd_rw_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
		    lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
	pin_to_bits(lcd_bl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
		    lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
	pin_to_bits(lcd_cl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
		    lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
	pin_to_bits(lcd_da_pin, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
		    lcd_bits[LCD_PORT_C][LCD_BIT_DA]);

	/* before this line, we must NOT send anything to the display.
	 * Since lcd_init_display() needs to write data, we have to
	 * enable mark the LCD initialized just before.
	 */
	lcd_initialized = 1;
	lcd_init_display();

	/* display a short message */
#ifdef CONFIG_PANEL_CHANGE_MESSAGE
#ifdef CONFIG_PANEL_BOOT_MESSAGE
	panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE);
#endif
#else
	panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\nPanel-"
			PANEL_VERSION);
#endif
	lcd_addr_x = lcd_addr_y = 0;
	lcd_must_clear = 1;	/* clear the display on the next device opening */
	lcd_gotoxy();
}

/*
 * These are the file operation function for user access to /dev/keypad
 */

static ssize_t keypad_read(struct file *file,
			   char *buf, size_t count, loff_t *ppos)
{

	unsigned i = *ppos;
	char *tmp = buf;

	if (keypad_buflen == 0) {
		if (file->f_flags & O_NONBLOCK)
			return -EAGAIN;

		interruptible_sleep_on(&keypad_read_wait);
		if (signal_pending(current))
			return -EINTR;
	}

	for (; count-- > 0 && (keypad_buflen > 0); ++i, ++tmp, --keypad_buflen) {
		put_user(keypad_buffer[keypad_start], tmp);
		keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
	}
	*ppos = i;

	return tmp - buf;
}

static int keypad_open(struct inode *inode, struct file *file)
{

	if (keypad_open_cnt)
		return -EBUSY;	/* open only once at a time */

	if (file->f_mode & FMODE_WRITE)	/* device is read-only */
		return -EPERM;

	keypad_buflen = 0;	/* flush the buffer on opening */
	keypad_open_cnt++;
	return 0;
}

static int keypad_release(struct inode *inode, struct file *file)
{
	keypad_open_cnt--;
	return 0;
}

static struct file_operations keypad_fops = {
	.read    = keypad_read,		/* read */
	.open    = keypad_open,		/* open */
	.release = keypad_release,	/* close */
};

static struct miscdevice keypad_dev = {
	KEYPAD_MINOR,
	"keypad",
	&keypad_fops
};

static void keypad_send_key(char *string, int max_len)
{
	if (init_in_progress)
		return;

	/* send the key to the device only if a process is attached to it. */
	if (keypad_open_cnt > 0) {
		while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) {
			keypad_buffer[(keypad_start + keypad_buflen++) %
				      KEYPAD_BUFFER] = *string++;
		}
		wake_up_interruptible(&keypad_read_wait);
	}
}

/* this function scans all the bits involving at least one logical signal, and puts the
 * results in the bitfield "phys_read" (one bit per established contact), and sets
 * "phys_read_prev" to "phys_read".
 *
 * Note: to debounce input signals, we will only consider as switched a signal which is
 * stable across 2 measures. Signals which are different between two reads will be kept
 * as they previously were in their logical form (phys_prev). A signal which has just
 * switched will have a 1 in (phys_read ^ phys_read_prev).
 */
static void phys_scan_contacts(void)
{
	int bit, bitval;
	char oldval;
	char bitmask;
	char gndmask;

	phys_prev = phys_curr;
	phys_read_prev = phys_read;
	phys_read = 0;		/* flush all signals */

	oldval = r_dtr(pprt) | scan_mask_o;	/* keep track of old value, with all outputs disabled */
	w_dtr(pprt, oldval & ~scan_mask_o);	/* activate all keyboard outputs (active low) */
	bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;	/* will have a 1 for each bit set to gnd */
	w_dtr(pprt, oldval);	/* disable all matrix signals */

	/* now that all outputs are cleared, the only active input bits are
	 * directly connected to the ground
	 */
	gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;	/* 1 for each grounded input */

	phys_read |= (pmask_t) gndmask << 40;	/* grounded inputs are signals 40-44 */

	if (bitmask != gndmask) {
		/* since clearing the outputs changed some inputs, we know that some
		 * input signals are currently tied to some outputs. So we'll scan them.
		 */
		for (bit = 0; bit < 8; bit++) {
			bitval = 1 << bit;

			if (!(scan_mask_o & bitval))	/* skip unused bits */
				continue;

			w_dtr(pprt, oldval & ~bitval);	/* enable this output */
			bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask;
			phys_read |= (pmask_t) bitmask << (5 * bit);
		}
		w_dtr(pprt, oldval);	/* disable all outputs */
	}
	/* this is easy: use old bits when they are flapping, use new ones when stable */
	phys_curr =
	    (phys_prev & (phys_read ^ phys_read_prev)) | (phys_read &
							  ~(phys_read ^
							    phys_read_prev));
}

static void panel_process_inputs(void)
{
	struct list_head *item;
	struct logical_input *input;

#if 0
	printk(KERN_DEBUG
	       "entering panel_process_inputs with pp=%016Lx & pc=%016Lx\n",
	       phys_prev, phys_curr);
#endif

	keypressed = 0;
	inputs_stable = 1;
	list_for_each(item, &logical_inputs) {
		input = list_entry(item, struct logical_input, list);

		switch (input->state) {
		case INPUT_ST_LOW:
			if ((phys_curr & input->mask) != input->value)
				break;
			/* if all needed ones were already set previously, this means that
			 * this logical signal has been activated by the releasing of
			 * another combined signal, so we don't want to match.
			 * eg: AB -(release B)-> A -(release A)-> 0 : don't match A.
			 */
			if ((phys_prev & input->mask) == input->value)
				break;
			input->rise_timer = 0;
			input->state = INPUT_ST_RISING;
			/* no break here, fall through */
		case INPUT_ST_RISING:
			if ((phys_curr & input->mask) != input->value) {
				input->state = INPUT_ST_LOW;
				break;
			}
			if (input->rise_timer < input->rise_time) {
				inputs_stable = 0;
				input->rise_timer++;
				break;
			}
			input->high_timer = 0;
			input->state = INPUT_ST_HIGH;
			/* no break here, fall through */
		case INPUT_ST_HIGH:
#if 0
			/* FIXME:
			 * this is an invalid test. It tries to catch transitions from single-key
			 * to multiple-key, but doesn't take into account the contacts polarity.
			 * The only solution to the problem is to parse keys from the most complex
			 * to the simplest combinations, and mark them as 'caught' once a combination
			 * matches, then unmatch it for all other ones.
			 */

			/* try to catch dangerous transitions cases :
			 * someone adds a bit, so this signal was a false
			 * positive resulting from a transition. We should invalidate
			 * the signal immediately and not call the release function.
			 * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
			 */
			if (((phys_prev & input->mask) == input->value)
			    && ((phys_curr & input->mask) > input->value)) {
				input->state = INPUT_ST_LOW;	/* invalidate */
				break;
			}
#endif

			if ((phys_curr & input->mask) == input->value) {
				if ((input->type == INPUT_TYPE_STD)
				    && (input->high_timer == 0)) {
					input->high_timer++;
					if (input->u.std.press_fct != NULL)
						input->u.std.press_fct(input->u.
								       std.
								       press_data);
				} else if (input->type == INPUT_TYPE_KBD) {
					keypressed = 1;	/* will turn on the light */

					if (input->high_timer == 0) {
						if (input->u.kbd.press_str[0])
							keypad_send_key(input->
									u.kbd.
									press_str,
									sizeof
									(input->
									 u.kbd.
									 press_str));
					}

					if (input->u.kbd.repeat_str[0]) {
						if (input->high_timer >=
						    KEYPAD_REP_START) {
							input->high_timer -=
							    KEYPAD_REP_DELAY;
							keypad_send_key(input->
									u.kbd.
									repeat_str,
									sizeof
									(input->
									 u.kbd.
									 repeat_str));
						}
						inputs_stable = 0;	/* we will need to come back here soon */
					}

					if (input->high_timer < 255)
						input->high_timer++;
				}
				break;
			} else {
				/* else signal falling down. Let's fall through. */
				input->state = INPUT_ST_FALLING;
				input->fall_timer = 0;
			}
			/* no break here, fall through */
		case INPUT_ST_FALLING:
#if 0
			/* FIXME !!! same comment as above */
			if (((phys_prev & input->mask) == input->value)
			    && ((phys_curr & input->mask) > input->value)) {
				input->state = INPUT_ST_LOW;	/* invalidate */
				break;
			}
#endif

			if ((phys_curr & input->mask) == input->value) {
				if (input->type == INPUT_TYPE_KBD) {
					keypressed = 1;	/* will turn on the light */

					if (input->u.kbd.repeat_str[0]) {
						if (input->high_timer >= KEYPAD_REP_START)
							input->high_timer -= KEYPAD_REP_DELAY;
						keypad_send_key(input->u.kbd.repeat_str,
								sizeof(input->u.kbd.repeat_str));
						inputs_stable = 0;	/* we will need to come back here soon */
					}

					if (input->high_timer < 255)
						input->high_timer++;
				}
				input->state = INPUT_ST_HIGH;
				break;
			} else if (input->fall_timer >= input->fall_time) {
				/* call release event */
				if (input->type == INPUT_TYPE_STD) {
					if (input->u.std.release_fct != NULL)
						input->u.std.release_fct(input->u.std.release_data);

				} else if (input->type == INPUT_TYPE_KBD) {
					if (input->u.kbd.release_str[0])
						keypad_send_key(input->u.kbd.release_str,
								sizeof(input->u.kbd.release_str));
				}

				input->state = INPUT_ST_LOW;
				break;
			} else {
				input->fall_timer++;
				inputs_stable = 0;
				break;
			}
		}
	}
}

static void panel_scan_timer(void)
{
	if (keypad_enabled && keypad_initialized) {
		if (spin_trylock(&pprt_lock)) {
			phys_scan_contacts();
			spin_unlock(&pprt_lock);	/* no need for the parport anymore */
		}

		if (!inputs_stable || phys_curr != phys_prev)
			panel_process_inputs();
	}

	if (lcd_enabled && lcd_initialized) {
		if (keypressed) {
			if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
				lcd_backlight(1);
			light_tempo = FLASH_LIGHT_TEMPO;
		} else if (light_tempo > 0) {
			light_tempo--;
			if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
				lcd_backlight(0);
		}
	}

	mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME);
}

static void init_scan_timer(void)
{
	if (scan_timer.function != NULL)
		return;		/* already started */

	init_timer(&scan_timer);
	scan_timer.expires = jiffies + INPUT_POLL_TIME;
	scan_timer.data = 0;
	scan_timer.function = (void *)&panel_scan_timer;
	add_timer(&scan_timer);
}

/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
 * if <omask> or <imask> are non-null, they will be or'ed with the bits corresponding
 * to out and in bits respectively.
 * returns 1 if ok, 0 if error (in which case, nothing is written).
 */
static int input_name2mask(char *name, pmask_t *mask, pmask_t *value,
			   char *imask, char *omask)
{
	static char sigtab[10] = "EeSsPpAaBb";
	char im, om;
	pmask_t m, v;

	om = im = m = v = 0ULL;
	while (*name) {
		int in, out, bit, neg;
		for (in = 0; (in < sizeof(sigtab)) && (sigtab[in] != *name); in++)
			;
		if (in >= sizeof(sigtab))
			return 0;	/* input name not found */
		neg = (in & 1);	/* odd (lower) names are negated */
		in >>= 1;
		im |= (1 << in);

		name++;
		if (isdigit(*name)) {
			out = *name - '0';
			om |= (1 << out);
		} else if (*name == '-')
			out = 8;
		else
			return 0;	/* unknown bit name */

		bit = (out * 5) + in;

		m |= 1ULL << bit;
		if (!neg)
			v |= 1ULL << bit;
		name++;
	}
	*mask = m;
	*value = v;
	if (imask)
		*imask |= im;
	if (omask)
		*omask |= om;
	return 1;
}

/* tries to bind a key to the signal name <name>. The key will send the
 * strings <press>, <repeat>, <release> for these respective events.
 * Returns the pointer to the new key if ok, NULL if the key could not be bound.
 */
static struct logical_input *panel_bind_key(char *name, char *press,
					    char *repeat, char *release)
{
	struct logical_input *key;

	key = kmalloc(sizeof(struct logical_input), GFP_KERNEL);
	if (!key) {
		printk(KERN_ERR "panel: not enough memory\n");
		return NULL;
	}
	memset(key, 0, sizeof(struct logical_input));
	if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i,
			     &scan_mask_o))
		return NULL;

	key->type = INPUT_TYPE_KBD;
	key->state = INPUT_ST_LOW;
	key->rise_time = 1;
	key->fall_time = 1;

#if 0
	printk(KERN_DEBUG "bind: <%s> : m=%016Lx v=%016Lx\n", name, key->mask,
	       key->value);
#endif
	strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str));
	strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str));
	strncpy(key->u.kbd.release_str, release,
		sizeof(key->u.kbd.release_str));
	list_add(&key->list, &logical_inputs);
	return key;
}

#if 0
/* tries to bind a callback function to the signal name <name>. The function
 * <press_fct> will be called with the <press_data> arg when the signal is
 * activated, and so on for <release_fct>/<release_data>
 * Returns the pointer to the new signal if ok, NULL if the signal could not be bound.
 */
static struct logical_input *panel_bind_callback(char *name,
						 void (*press_fct) (int),
						 int press_data,
						 void (*release_fct) (int),
						 int release_data)
{
	struct logical_input *callback;

	callback = kmalloc(sizeof(struct logical_input), GFP_KERNEL);
	if (!callback) {
		printk(KERN_ERR "panel: not enough memory\n");
		return NULL;
	}
	memset(callback, 0, sizeof(struct logical_input));
	if (!input_name2mask(name, &callback->mask, &callback->value,
			     &scan_mask_i, &scan_mask_o))
		return NULL;

	callback->type = INPUT_TYPE_STD;
	callback->state = INPUT_ST_LOW;
	callback->rise_time = 1;
	callback->fall_time = 1;
	callback->u.std.press_fct = press_fct;
	callback->u.std.press_data = press_data;
	callback->u.std.release_fct = release_fct;
	callback->u.std.release_data = release_data;
	list_add(&callback->list, &logical_inputs);
	return callback;
}
#endif

static void keypad_init(void)
{
	int keynum;
	init_waitqueue_head(&keypad_read_wait);
	keypad_buflen = 0;	/* flushes any eventual noisy keystroke */

	/* Let's create all known keys */

	for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) {
		panel_bind_key(keypad_profile[keynum][0],
			       keypad_profile[keynum][1],
			       keypad_profile[keynum][2],
			       keypad_profile[keynum][3]);
	}

	init_scan_timer();
	keypad_initialized = 1;
}

/**************************************************/
/* device initialization                          */
/**************************************************/

static int panel_notify_sys(struct notifier_block *this, unsigned long code,
			    void *unused)
{
	if (lcd_enabled && lcd_initialized) {
		switch (code) {
		case SYS_DOWN:
			panel_lcd_print
			    ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+");
			break;
		case SYS_HALT:
			panel_lcd_print
			    ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+");
			break;
		case SYS_POWER_OFF:
			panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+");
			break;
		default:
			break;
		}
	}
	return NOTIFY_DONE;
}

static struct notifier_block panel_notifier = {
	panel_notify_sys,
	NULL,
	0
};

static void panel_attach(struct parport *port)
{
	if (port->number != parport)
		return;

	if (pprt) {
		printk(KERN_ERR
		       "panel_attach(): port->number=%d parport=%d, already registered !\n",
		       port->number, parport);
		return;
	}

	pprt = parport_register_device(port, "panel", NULL, NULL,	/* pf, kf */
				       NULL,
				       /*PARPORT_DEV_EXCL */
				       0, (void *)&pprt);

	if (parport_claim(pprt)) {
		printk(KERN_ERR
		       "Panel: could not claim access to parport%d. Aborting.\n",
		       parport);
		return;
	}

	/* must init LCD first, just in case an IRQ from the keypad is generated at keypad init */
	if (lcd_enabled) {
		lcd_init();
		misc_register(&lcd_dev);
	}

	if (keypad_enabled) {
		keypad_init();
		misc_register(&keypad_dev);
	}
}

static void panel_detach(struct parport *port)
{
	if (port->number != parport)
		return;

	if (!pprt) {
		printk(KERN_ERR
		       "panel_detach(): port->number=%d parport=%d, nothing to unregister.\n",
		       port->number, parport);
		return;
	}

	if (keypad_enabled && keypad_initialized)
		misc_deregister(&keypad_dev);

	if (lcd_enabled && lcd_initialized)
		misc_deregister(&lcd_dev);

	parport_release(pprt);
	parport_unregister_device(pprt);
	pprt = NULL;
}

static struct parport_driver panel_driver = {
	.name = "panel",
	.attach = panel_attach,
	.detach = panel_detach,
};

/* init function */
int panel_init(void)
{
	/* for backwards compatibility */
	if (keypad_type < 0)
		keypad_type = keypad_enabled;

	if (lcd_type < 0)
		lcd_type = lcd_enabled;

	if (parport < 0)
		parport = DEFAULT_PARPORT;

	/* take care of an eventual profile */
	switch (profile) {
	case PANEL_PROFILE_CUSTOM:	/* custom profile */
		if (keypad_type < 0)
			keypad_type = DEFAULT_KEYPAD;
		if (lcd_type < 0)
			lcd_type = DEFAULT_LCD;
		break;
	case PANEL_PROFILE_OLD:	/* 8 bits, 2*16, old keypad */
		if (keypad_type < 0)
			keypad_type = KEYPAD_TYPE_OLD;
		if (lcd_type < 0)
			lcd_type = LCD_TYPE_OLD;
		if (lcd_width < 0)
			lcd_width = 16;
		if (lcd_hwidth < 0)
			lcd_hwidth = 16;
		break;
	case PANEL_PROFILE_NEW:	/* serial, 2*16, new keypad */
		if (keypad_type < 0)
			keypad_type = KEYPAD_TYPE_NEW;
		if (lcd_type < 0)
			lcd_type = LCD_TYPE_KS0074;
		break;
	case PANEL_PROFILE_HANTRONIX:	/* 8 bits, 2*16 hantronix-like, no keypad */
		if (keypad_type < 0)
			keypad_type = KEYPAD_TYPE_NONE;
		if (lcd_type < 0)
			lcd_type = LCD_TYPE_HANTRONIX;
		break;
	case PANEL_PROFILE_NEXCOM:	/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
		if (keypad_type < 0)
			keypad_type = KEYPAD_TYPE_NEXCOM;
		if (lcd_type < 0)
			lcd_type = LCD_TYPE_NEXCOM;
		break;
	case PANEL_PROFILE_LARGE:	/* 8 bits, 2*40, old keypad */
		if (keypad_type < 0)
			keypad_type = KEYPAD_TYPE_OLD;
		if (lcd_type < 0)
			lcd_type = LCD_TYPE_OLD;
		break;
	}

	lcd_enabled = (lcd_type > 0);
	keypad_enabled = (keypad_type > 0);

	switch (keypad_type) {
	case KEYPAD_TYPE_OLD:
		keypad_profile = old_keypad_profile;
		break;
	case KEYPAD_TYPE_NEW:
		keypad_profile = new_keypad_profile;
		break;
	case KEYPAD_TYPE_NEXCOM:
		keypad_profile = nexcom_keypad_profile;
		break;
	default:
		keypad_profile = NULL;
		break;
	}

	/* tells various subsystems about the fact that we are initializing */
	init_in_progress = 1;

	if (parport_register_driver(&panel_driver)) {
		printk(KERN_ERR
		       "Panel: could not register with parport. Aborting.\n");
		return -EIO;
	}

	if (!lcd_enabled && !keypad_enabled) {
		/* no device enabled, let's release the parport */
		if (pprt) {
			parport_release(pprt);
			parport_unregister_device(pprt);
		}
		parport_unregister_driver(&panel_driver);
		printk(KERN_ERR "Panel driver version " PANEL_VERSION
		       " disabled.\n");
		return -ENODEV;
	}

	register_reboot_notifier(&panel_notifier);

	if (pprt)
		printk(KERN_INFO "Panel driver version " PANEL_VERSION
		       " registered on parport%d (io=0x%lx).\n", parport,
		       pprt->port->base);
	else
		printk(KERN_INFO "Panel driver version " PANEL_VERSION
		       " not yet registered\n");
	/* tells various subsystems about the fact that initialization is finished */
	init_in_progress = 0;
	return 0;
}

static int __init panel_init_module(void)
{
	return panel_init();
}

static void __exit panel_cleanup_module(void)
{
	unregister_reboot_notifier(&panel_notifier);

	if (scan_timer.function != NULL)
		del_timer(&scan_timer);

	if (keypad_enabled)
		misc_deregister(&keypad_dev);

	if (lcd_enabled) {
		panel_lcd_print("\x0cLCD driver " PANEL_VERSION
				"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
		misc_deregister(&lcd_dev);
	}

	/* TODO: free all input signals */

	parport_release(pprt);
	parport_unregister_device(pprt);
	parport_unregister_driver(&panel_driver);
}

module_init(panel_init_module);
module_exit(panel_cleanup_module);
MODULE_AUTHOR("Willy Tarreau");
MODULE_LICENSE("GPL");

/*
 * Local variables:
 *  c-indent-level: 4
 *  tab-width: 8
 * End:
 */