Jason Cooper | 97fdd4e | 2013-08-06 15:01:19 +0000 | [diff] [blame] | 1 | #include "kirkwood.dtsi" |
| 2 | #include "kirkwood-6281.dtsi" |
Andrew Lunn | eee47b7 | 2013-07-17 18:51:49 +0200 | [diff] [blame] | 3 | |
| 4 | / { |
| 5 | model = "ZyXEL NSA310"; |
| 6 | |
| 7 | ocp@f1000000 { |
| 8 | pinctrl: pinctrl@10000 { |
| 9 | |
| 10 | pmx_usb_power_off: pmx-usb-power-off { |
| 11 | marvell,pins = "mpp21"; |
| 12 | marvell,function = "gpio"; |
| 13 | }; |
| 14 | pmx_pwr_off: pmx-pwr-off { |
| 15 | marvell,pins = "mpp48"; |
| 16 | marvell,function = "gpio"; |
| 17 | }; |
| 18 | |
| 19 | }; |
| 20 | |
| 21 | serial@12000 { |
| 22 | status = "ok"; |
| 23 | }; |
| 24 | |
| 25 | sata@80000 { |
| 26 | status = "okay"; |
| 27 | nr-ports = <2>; |
| 28 | }; |
| 29 | |
| 30 | nand@3000000 { |
| 31 | status = "okay"; |
| 32 | chip-delay = <35>; |
| 33 | |
| 34 | partition@0 { |
| 35 | label = "uboot"; |
| 36 | reg = <0x0000000 0x0100000>; |
| 37 | read-only; |
| 38 | }; |
| 39 | partition@100000 { |
| 40 | label = "uboot_env"; |
| 41 | reg = <0x0100000 0x0080000>; |
| 42 | }; |
| 43 | partition@180000 { |
| 44 | label = "key_store"; |
| 45 | reg = <0x0180000 0x0080000>; |
| 46 | }; |
| 47 | partition@200000 { |
| 48 | label = "info"; |
| 49 | reg = <0x0200000 0x0080000>; |
| 50 | }; |
| 51 | partition@280000 { |
| 52 | label = "etc"; |
| 53 | reg = <0x0280000 0x0a00000>; |
| 54 | }; |
| 55 | partition@c80000 { |
| 56 | label = "kernel_1"; |
| 57 | reg = <0x0c80000 0x0a00000>; |
| 58 | }; |
| 59 | partition@1680000 { |
| 60 | label = "rootfs1"; |
| 61 | reg = <0x1680000 0x2fc0000>; |
| 62 | }; |
| 63 | partition@4640000 { |
| 64 | label = "kernel_2"; |
| 65 | reg = <0x4640000 0x0a00000>; |
| 66 | }; |
| 67 | partition@5040000 { |
| 68 | label = "rootfs2"; |
| 69 | reg = <0x5040000 0x2fc0000>; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | pcie-controller { |
| 74 | status = "okay"; |
| 75 | |
| 76 | pcie@1,0 { |
| 77 | status = "okay"; |
| 78 | }; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | gpio_poweroff { |
| 83 | compatible = "gpio-poweroff"; |
| 84 | pinctrl-0 = <&pmx_pwr_off>; |
| 85 | pinctrl-names = "default"; |
| 86 | gpios = <&gpio1 16 0>; |
| 87 | }; |
| 88 | |
| 89 | regulators { |
| 90 | compatible = "simple-bus"; |
| 91 | #address-cells = <1>; |
| 92 | #size-cells = <0>; |
| 93 | pinctrl-0 = <&pmx_usb_power_off>; |
| 94 | pinctrl-names = "default"; |
| 95 | |
| 96 | usb0_power_off: regulator@1 { |
| 97 | compatible = "regulator-fixed"; |
| 98 | reg = <1>; |
| 99 | regulator-name = "USB Power Off"; |
| 100 | regulator-min-microvolt = <5000000>; |
| 101 | regulator-max-microvolt = <5000000>; |
| 102 | regulator-always-on; |
| 103 | regulator-boot-on; |
| 104 | gpio = <&gpio0 21 0>; |
| 105 | }; |
| 106 | }; |
| 107 | }; |