Gregory CLEMENT | eb59e09 | 2018-03-15 17:06:28 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Device Tree file for NETGEAR ReadyNAS NV+ v2 |
| 4 | * |
| 5 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 10 | #include "kirkwood.dtsi" |
| 11 | #include "kirkwood-6282.dtsi" |
| 12 | |
| 13 | / { |
| 14 | model = "NETGEAR ReadyNAS NV+ v2"; |
| 15 | compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; |
| 16 | |
| 17 | memory { /* 256 MB */ |
| 18 | device_type = "memory"; |
| 19 | reg = <0x00000000 0x10000000>; |
| 20 | }; |
| 21 | |
| 22 | chosen { |
| 23 | bootargs = "console=ttyS0,115200n8 earlyprintk"; |
Sebastian Hesselbarth | ab83361 | 2014-04-30 14:56:30 +0200 | [diff] [blame] | 24 | stdout-path = &uart0; |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 25 | }; |
| 26 | |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 27 | ocp@f1000000 { |
Sebastian Hesselbarth | a9483969 | 2014-04-30 14:56:32 +0200 | [diff] [blame] | 28 | pinctrl: pin-controller@10000 { |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 29 | pmx_button_power: pmx-button-power { |
| 30 | marvell,pins = "mpp47"; |
| 31 | marvell,function = "gpio"; |
| 32 | }; |
| 33 | |
| 34 | pmx_button_backup: pmx-button-backup { |
| 35 | marvell,pins = "mpp45"; |
| 36 | marvell,function = "gpio"; |
| 37 | }; |
| 38 | |
| 39 | pmx_button_reset: pmx-button-reset { |
| 40 | marvell,pins = "mpp13"; |
| 41 | marvell,function = "gpio"; |
| 42 | }; |
| 43 | |
| 44 | pmx_led_blue_power: pmx-led-blue-power { |
| 45 | marvell,pins = "mpp31"; |
| 46 | marvell,function = "gpio"; |
| 47 | }; |
| 48 | |
| 49 | pmx_led_blue_backup: pmx-led-blue-backup { |
| 50 | marvell,pins = "mpp22"; |
| 51 | marvell,function = "gpio"; |
| 52 | }; |
| 53 | |
| 54 | pmx_led_blue_disk1: pmx-led-blue-disk1 { |
| 55 | marvell,pins = "mpp20"; |
| 56 | marvell,function = "gpio"; |
| 57 | }; |
| 58 | |
| 59 | pmx_led_blue_disk2: pmx-led-blue-disk2 { |
| 60 | marvell,pins = "mpp23"; |
| 61 | marvell,function = "gpio"; |
| 62 | }; |
| 63 | |
| 64 | pmx_led_blue_disk3: pmx-led-blue-disk3 { |
| 65 | marvell,pins = "mpp24"; |
| 66 | marvell,function = "gpio"; |
| 67 | }; |
| 68 | |
| 69 | pmx_led_blue_disk4: pmx-led-blue-disk4 { |
| 70 | marvell,pins = "mpp29"; |
| 71 | marvell,function = "gpio"; |
| 72 | }; |
| 73 | |
| 74 | pmx_poweroff: pmx-poweroff { |
| 75 | marvell,pins = "mpp30"; |
| 76 | marvell,function = "gpio"; |
| 77 | }; |
| 78 | }; |
| 79 | |
| 80 | clocks { |
| 81 | g762_clk: g762-oscillator { |
| 82 | compatible = "fixed-clock"; |
| 83 | #clock-cells = <0>; |
| 84 | clock-frequency = <8192>; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | i2c@11000 { |
| 89 | status = "okay"; |
| 90 | |
| 91 | rs5c372a: rs5c372a@32 { |
| 92 | compatible = "ricoh,rs5c372a"; |
| 93 | reg = <0x32>; |
| 94 | }; |
| 95 | |
| 96 | g762: g762@3e { |
| 97 | compatible = "gmt,g762"; |
| 98 | reg = <0x3e>; |
| 99 | clocks = <&g762_clk>; /* input clock */ |
| 100 | fan_gear_mode = <0>; |
| 101 | fan_startv = <1>; |
| 102 | pwm_polarity = <0>; |
| 103 | }; |
| 104 | }; |
| 105 | |
| 106 | serial@12000 { |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 107 | status = "okay"; |
| 108 | }; |
| 109 | |
| 110 | sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */ |
| 111 | status = "okay"; |
| 112 | nr-ports = <1>; |
| 113 | }; |
| 114 | }; |
| 115 | |
| 116 | gpio-leds { |
| 117 | compatible = "gpio-leds"; |
| 118 | pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup |
| 119 | &pmx_led_blue_disk1 &pmx_led_blue_disk2 |
| 120 | &pmx_led_blue_disk3 &pmx_led_blue_disk3 >; |
| 121 | pinctrl-names = "default"; |
| 122 | |
| 123 | power_led { |
| 124 | label = "status:blue:power_led"; |
| 125 | gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; |
| 126 | linux,default-trigger = "default-on"; |
| 127 | }; |
| 128 | |
| 129 | backup_led { |
| 130 | label = "status:blue:backup_led"; |
| 131 | gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| 132 | }; |
| 133 | |
| 134 | disk1_led { |
| 135 | label = "status:blue:disk1_led"; |
| 136 | gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| 137 | }; |
| 138 | |
| 139 | disk2_led { |
| 140 | label = "status:blue:disk2_led"; |
| 141 | gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| 142 | }; |
| 143 | |
| 144 | disk3_led { |
| 145 | label = "status:blue:disk3_led"; |
| 146 | gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| 147 | }; |
| 148 | |
| 149 | disk4_led { |
| 150 | label = "status:blue:disk4_led"; |
| 151 | gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | gpio-keys { |
| 156 | compatible = "gpio-keys"; |
| 157 | pinctrl-0 = <&pmx_button_power &pmx_button_backup |
| 158 | &pmx_button_reset>; |
| 159 | pinctrl-names = "default"; |
| 160 | |
| 161 | power-button { |
| 162 | label = "Power Button"; |
| 163 | linux,code = <KEY_POWER>; |
| 164 | gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| 165 | }; |
| 166 | |
| 167 | reset-button { |
| 168 | label = "Reset Button"; |
| 169 | linux,code = <KEY_RESTART>; |
| 170 | gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| 171 | }; |
| 172 | |
| 173 | backup-button { |
| 174 | label = "Backup Button"; |
| 175 | linux,code = <KEY_COPY>; |
| 176 | gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 177 | }; |
| 178 | }; |
| 179 | |
| 180 | gpio-poweroff { |
| 181 | compatible = "gpio-poweroff"; |
| 182 | pinctrl-0 = <&pmx_poweroff>; |
| 183 | pinctrl-names = "default"; |
| 184 | gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; |
| 185 | }; |
| 186 | |
| 187 | regulators { |
| 188 | compatible = "simple-bus"; |
| 189 | #address-cells = <1>; |
| 190 | #size-cells = <0>; |
| 191 | |
Andrew Lunn | 49ad48c | 2016-04-03 04:03:50 +0200 | [diff] [blame] | 192 | usb3_regulator: usb3-regulator@1 { |
Arnaud Ebalard | 46ca506 | 2013-11-30 16:13:44 +0100 | [diff] [blame] | 193 | compatible = "regulator-fixed"; |
| 194 | reg = <1>; |
| 195 | regulator-name = "USB 3.0 Power"; |
| 196 | regulator-min-microvolt = <5000000>; |
| 197 | regulator-max-microvolt = <5000000>; |
| 198 | enable-active-high; |
| 199 | regulator-always-on; |
| 200 | regulator-boot-on; |
| 201 | gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| 202 | }; |
| 203 | }; |
| 204 | }; |
| 205 | |
| 206 | &nand { |
| 207 | status = "okay"; |
| 208 | |
| 209 | partition@0 { |
| 210 | label = "u-boot"; |
| 211 | reg = <0x0000000 0x180000>; |
| 212 | read-only; |
| 213 | }; |
| 214 | |
| 215 | partition@180000 { |
| 216 | label = "u-boot-env"; |
| 217 | reg = <0x180000 0x20000>; |
| 218 | }; |
| 219 | |
| 220 | partition@200000 { |
| 221 | label = "uImage"; |
| 222 | reg = <0x0200000 0x600000>; |
| 223 | }; |
| 224 | |
| 225 | partition@800000 { |
| 226 | label = "minirootfs"; |
| 227 | reg = <0x0800000 0x1000000>; |
| 228 | }; |
| 229 | |
| 230 | partition@1800000 { |
| 231 | label = "jffs2"; |
| 232 | reg = <0x1800000 0x6800000>; |
| 233 | }; |
| 234 | }; |
| 235 | |
| 236 | &mdio { |
| 237 | status = "okay"; |
| 238 | |
| 239 | ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
| 240 | device_type = "ethernet-phy"; |
| 241 | reg = <0>; |
| 242 | }; |
| 243 | }; |
| 244 | |
| 245 | ð0 { |
| 246 | status = "okay"; |
| 247 | |
| 248 | ethernet0-port@0 { |
| 249 | phy-handle = <ðphy0>; |
| 250 | }; |
| 251 | }; |
Andrew Lunn | eb13cf8 | 2016-04-03 04:03:47 +0200 | [diff] [blame] | 252 | |
| 253 | /* Connected to NEC uPD720200 USB 3.0 controller */ |
| 254 | &pciec { |
| 255 | status = "okay"; |
| 256 | }; |
| 257 | |
| 258 | &pcie0 { |
| 259 | status = "okay"; |
| 260 | }; |