Patrick Delaunay | 6a0bc35 | 2023-02-06 13:43:51 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver |
| 4 | * |
| 5 | * Copyright (C) 2022, STMicroelectronics - All Rights Reserved |
| 6 | */ |
| 7 | |
| 8 | #include <linux/tee_drv.h> |
| 9 | |
| 10 | #include "stm32-bsec-optee-ta.h" |
| 11 | |
| 12 | /* |
| 13 | * Read OTP memory |
| 14 | * |
| 15 | * [in] value[0].a OTP start offset in byte |
| 16 | * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock) |
| 17 | * [out] memref[1].buffer Output buffer to store read values |
| 18 | * [out] memref[1].size Size of OTP to be read |
| 19 | * |
| 20 | * Return codes: |
| 21 | * TEE_SUCCESS - Invoke command success |
| 22 | * TEE_ERROR_BAD_PARAMETERS - Incorrect input param |
| 23 | * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller |
| 24 | */ |
| 25 | #define PTA_BSEC_READ_MEM 0x0 |
| 26 | |
| 27 | /* |
| 28 | * Write OTP memory |
| 29 | * |
| 30 | * [in] value[0].a OTP start offset in byte |
| 31 | * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock) |
| 32 | * [in] memref[1].buffer Input buffer to read values |
| 33 | * [in] memref[1].size Size of OTP to be written |
| 34 | * |
| 35 | * Return codes: |
| 36 | * TEE_SUCCESS - Invoke command success |
| 37 | * TEE_ERROR_BAD_PARAMETERS - Incorrect input param |
| 38 | * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller |
| 39 | */ |
| 40 | #define PTA_BSEC_WRITE_MEM 0x1 |
| 41 | |
| 42 | /* value of PTA_BSEC access type = value[in] b */ |
| 43 | #define SHADOW_ACCESS 0 |
| 44 | #define FUSE_ACCESS 1 |
| 45 | #define LOCK_ACCESS 2 |
| 46 | |
| 47 | /* Bitfield definition for LOCK status */ |
| 48 | #define LOCK_PERM BIT(30) |
| 49 | |
| 50 | /* OP-TEE STM32MP BSEC TA UUID */ |
| 51 | static const uuid_t stm32mp_bsec_ta_uuid = |
| 52 | UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5, |
| 53 | 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03); |
| 54 | |
| 55 | /* |
| 56 | * Check whether this driver supports the BSEC TA in the TEE instance |
| 57 | * represented by the params (ver/data) to this function. |
| 58 | */ |
| 59 | static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver, |
| 60 | const void *data) |
| 61 | { |
| 62 | /* Currently this driver only supports GP compliant, OP-TEE based TA */ |
| 63 | if ((ver->impl_id == TEE_IMPL_ID_OPTEE) && |
| 64 | (ver->gen_caps & TEE_GEN_CAP_GP)) |
| 65 | return 1; |
| 66 | else |
| 67 | return 0; |
| 68 | } |
| 69 | |
| 70 | /* Open a session to OP-TEE for STM32MP BSEC TA */ |
| 71 | static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id) |
| 72 | { |
| 73 | struct tee_ioctl_open_session_arg sess_arg; |
| 74 | int rc; |
| 75 | |
| 76 | memset(&sess_arg, 0, sizeof(sess_arg)); |
| 77 | export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid); |
| 78 | sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; |
| 79 | sess_arg.num_params = 0; |
| 80 | |
| 81 | rc = tee_client_open_session(ctx, &sess_arg, NULL); |
| 82 | if ((rc < 0) || (sess_arg.ret != 0)) { |
| 83 | pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n", |
| 84 | __func__, sess_arg.ret, rc); |
| 85 | if (!rc) |
| 86 | rc = -EINVAL; |
| 87 | } else { |
| 88 | *id = sess_arg.session; |
| 89 | } |
| 90 | |
| 91 | return rc; |
| 92 | } |
| 93 | |
| 94 | /* close a session to OP-TEE for STM32MP BSEC TA */ |
| 95 | static void stm32_bsec_ta_close_session(void *ctx, u32 id) |
| 96 | { |
| 97 | tee_client_close_session(ctx, id); |
| 98 | } |
| 99 | |
| 100 | /* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */ |
| 101 | int stm32_bsec_optee_ta_open(struct tee_context **ctx) |
| 102 | { |
| 103 | struct tee_context *tee_ctx; |
| 104 | u32 session_id; |
| 105 | int rc; |
| 106 | |
| 107 | /* Open context with TEE driver */ |
| 108 | tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL); |
| 109 | if (IS_ERR(tee_ctx)) { |
| 110 | rc = PTR_ERR(tee_ctx); |
| 111 | if (rc == -ENOENT) |
| 112 | return -EPROBE_DEFER; |
| 113 | pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc); |
| 114 | |
| 115 | return rc; |
| 116 | } |
| 117 | |
| 118 | /* Check STM32MP BSEC TA presence */ |
| 119 | rc = stm32_bsec_ta_open_session(tee_ctx, &session_id); |
| 120 | if (rc) { |
| 121 | tee_client_close_context(tee_ctx); |
| 122 | return rc; |
| 123 | } |
| 124 | |
| 125 | stm32_bsec_ta_close_session(tee_ctx, session_id); |
| 126 | |
| 127 | *ctx = tee_ctx; |
| 128 | |
| 129 | return 0; |
| 130 | } |
| 131 | |
| 132 | /* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */ |
| 133 | void stm32_bsec_optee_ta_close(void *ctx) |
| 134 | { |
| 135 | tee_client_close_context(ctx); |
| 136 | } |
| 137 | |
| 138 | /* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */ |
| 139 | int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset, |
| 140 | void *buf, size_t bytes) |
| 141 | { |
| 142 | struct tee_shm *shm; |
| 143 | struct tee_ioctl_invoke_arg arg; |
| 144 | struct tee_param param[2]; |
| 145 | u8 *shm_buf; |
| 146 | u32 start, num_bytes; |
| 147 | int ret; |
| 148 | u32 session_id; |
| 149 | |
| 150 | ret = stm32_bsec_ta_open_session(ctx, &session_id); |
| 151 | if (ret) |
| 152 | return ret; |
| 153 | |
| 154 | memset(&arg, 0, sizeof(arg)); |
| 155 | memset(¶m, 0, sizeof(param)); |
| 156 | |
| 157 | arg.func = PTA_BSEC_READ_MEM; |
| 158 | arg.session = session_id; |
| 159 | arg.num_params = 2; |
| 160 | |
| 161 | /* align access on 32bits */ |
| 162 | start = ALIGN_DOWN(offset, 4); |
| 163 | num_bytes = round_up(offset + bytes - start, 4); |
| 164 | param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT; |
| 165 | param[0].u.value.a = start; |
| 166 | param[0].u.value.b = SHADOW_ACCESS; |
| 167 | |
| 168 | shm = tee_shm_alloc_kernel_buf(ctx, num_bytes); |
| 169 | if (IS_ERR(shm)) { |
| 170 | ret = PTR_ERR(shm); |
| 171 | goto out_tee_session; |
| 172 | } |
| 173 | |
| 174 | param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; |
| 175 | param[1].u.memref.shm = shm; |
| 176 | param[1].u.memref.size = num_bytes; |
| 177 | |
| 178 | ret = tee_client_invoke_func(ctx, &arg, param); |
| 179 | if (ret < 0 || arg.ret != 0) { |
| 180 | pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", |
| 181 | arg.ret, ret); |
| 182 | if (!ret) |
| 183 | ret = -EIO; |
| 184 | } |
| 185 | if (!ret) { |
| 186 | shm_buf = tee_shm_get_va(shm, 0); |
| 187 | if (IS_ERR(shm_buf)) { |
| 188 | ret = PTR_ERR(shm_buf); |
| 189 | pr_err("tee_shm_get_va failed for transmit (%d)\n", ret); |
| 190 | } else { |
| 191 | /* read data from 32 bits aligned buffer */ |
| 192 | memcpy(buf, &shm_buf[offset % 4], bytes); |
| 193 | } |
| 194 | } |
| 195 | |
| 196 | tee_shm_free(shm); |
| 197 | |
| 198 | out_tee_session: |
| 199 | stm32_bsec_ta_close_session(ctx, session_id); |
| 200 | |
| 201 | return ret; |
| 202 | } |
| 203 | |
| 204 | /* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */ |
| 205 | int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower, |
| 206 | unsigned int offset, void *buf, size_t bytes) |
| 207 | { struct tee_shm *shm; |
| 208 | struct tee_ioctl_invoke_arg arg; |
| 209 | struct tee_param param[2]; |
| 210 | u8 *shm_buf; |
| 211 | int ret; |
| 212 | u32 session_id; |
| 213 | |
| 214 | ret = stm32_bsec_ta_open_session(ctx, &session_id); |
| 215 | if (ret) |
| 216 | return ret; |
| 217 | |
| 218 | /* Allow only writing complete 32-bits aligned words */ |
| 219 | if ((bytes % 4) || (offset % 4)) |
| 220 | return -EINVAL; |
| 221 | |
| 222 | memset(&arg, 0, sizeof(arg)); |
| 223 | memset(¶m, 0, sizeof(param)); |
| 224 | |
| 225 | arg.func = PTA_BSEC_WRITE_MEM; |
| 226 | arg.session = session_id; |
| 227 | arg.num_params = 2; |
| 228 | |
| 229 | param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT; |
| 230 | param[0].u.value.a = offset; |
| 231 | param[0].u.value.b = FUSE_ACCESS; |
| 232 | |
| 233 | shm = tee_shm_alloc_kernel_buf(ctx, bytes); |
| 234 | if (IS_ERR(shm)) { |
| 235 | ret = PTR_ERR(shm); |
| 236 | goto out_tee_session; |
| 237 | } |
| 238 | |
| 239 | param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; |
| 240 | param[1].u.memref.shm = shm; |
| 241 | param[1].u.memref.size = bytes; |
| 242 | |
| 243 | shm_buf = tee_shm_get_va(shm, 0); |
| 244 | if (IS_ERR(shm_buf)) { |
| 245 | ret = PTR_ERR(shm_buf); |
| 246 | pr_err("tee_shm_get_va failed for transmit (%d)\n", ret); |
| 247 | tee_shm_free(shm); |
| 248 | |
| 249 | goto out_tee_session; |
| 250 | } |
| 251 | |
| 252 | memcpy(shm_buf, buf, bytes); |
| 253 | |
| 254 | ret = tee_client_invoke_func(ctx, &arg, param); |
| 255 | if (ret < 0 || arg.ret != 0) { |
| 256 | pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret); |
| 257 | if (!ret) |
| 258 | ret = -EIO; |
| 259 | } |
| 260 | pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret); |
| 261 | |
| 262 | /* Lock the upper OTPs with ECC protection, word programming only */ |
| 263 | if (!ret && ((offset + bytes) >= (lower * 4))) { |
| 264 | u32 start, nb_lock; |
| 265 | u32 *lock = (u32 *)shm_buf; |
| 266 | int i; |
| 267 | |
| 268 | /* |
| 269 | * don't lock the lower OTPs, no ECC protection and incremental |
| 270 | * bit programming, a second write is allowed |
| 271 | */ |
| 272 | start = max_t(u32, offset, lower * 4); |
| 273 | nb_lock = (offset + bytes - start) / 4; |
| 274 | |
| 275 | param[0].u.value.a = start; |
| 276 | param[0].u.value.b = LOCK_ACCESS; |
| 277 | param[1].u.memref.size = nb_lock * 4; |
| 278 | |
| 279 | for (i = 0; i < nb_lock; i++) |
| 280 | lock[i] = LOCK_PERM; |
| 281 | |
| 282 | ret = tee_client_invoke_func(ctx, &arg, param); |
| 283 | if (ret < 0 || arg.ret != 0) { |
| 284 | pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret); |
| 285 | if (!ret) |
| 286 | ret = -EIO; |
| 287 | } |
| 288 | pr_debug("Lock upper OTPs %d to %d, ret=%d\n", |
| 289 | start / 4, start / 4 + nb_lock, ret); |
| 290 | } |
| 291 | |
| 292 | tee_shm_free(shm); |
| 293 | |
| 294 | out_tee_session: |
| 295 | stm32_bsec_ta_close_session(ctx, session_id); |
| 296 | |
| 297 | return ret; |
| 298 | } |