blob: 9d16cf925483744813ab5804f573a1d464673f4a [file] [log] [blame]
Alok Kataria851b1642009-10-13 14:51:05 -07001/*
2 * VMware PVSCSI header file
3 *
Arvind Kumara2713cc2014-03-08 12:51:12 -08004 * Copyright (C) 2008-2014, VMware, Inc. All Rights Reserved.
Alok Kataria851b1642009-10-13 14:51:05 -07005 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; version 2 of the License and no later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13 * NON INFRINGEMENT. See the GNU General Public License for more
14 * details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19 *
Alok Kataria851b1642009-10-13 14:51:05 -070020 */
21
22#ifndef _VMW_PVSCSI_H_
23#define _VMW_PVSCSI_H_
24
25#include <linux/types.h>
26
David Jefferyaac173e2016-10-28 12:27:26 -040027#define PVSCSI_DRIVER_VERSION_STRING "1.0.7.0-k"
Alok Kataria851b1642009-10-13 14:51:05 -070028
29#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
30
31#define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */
32
Alok Kataria851b1642009-10-13 14:51:05 -070033#define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0
34
35/*
36 * host adapter status/error codes
37 */
38enum HostBusAdapterStatus {
Arvind Kumara9310732012-03-08 15:48:53 +053039 BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
40 BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
41 BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
42 BTSTAT_DATA_UNDERRUN = 0x0c,
43 BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
44 BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
45 BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
46 BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
47 * requested by target */
48 BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
49 * first CCB */
50 BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
51 * list */
52 BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
53 BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
54 * rejected by target */
55 BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
56 * host adapter */
57 BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
58 BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
59 * sent a SCSI RST */
60 BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
61 BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
62 * RST */
63 BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
64 * (w/o tag) */
65 BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
66 BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
67 BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
68 BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
69 BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
70};
71
72/*
73 * SCSI device status values.
74 */
75enum ScsiDeviceStatus {
76 SDSTAT_GOOD = 0x00, /* No errors. */
77 SDSTAT_CHECK = 0x02, /* Check condition. */
Alok Kataria851b1642009-10-13 14:51:05 -070078};
79
80/*
81 * Register offsets.
82 *
83 * These registers are accessible both via i/o space and mm i/o.
84 */
85
86enum PVSCSIRegOffset {
87 PVSCSI_REG_OFFSET_COMMAND = 0x0,
88 PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4,
89 PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8,
90 PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100,
91 PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104,
92 PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108,
93 PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c,
94 PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c,
95 PVSCSI_REG_OFFSET_INTR_MASK = 0x2010,
96 PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
97 PVSCSI_REG_OFFSET_DEBUG = 0x3018,
98 PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018,
99};
100
101/*
102 * Virtual h/w commands.
103 */
104
105enum PVSCSICommands {
106 PVSCSI_CMD_FIRST = 0, /* has to be first */
107
108 PVSCSI_CMD_ADAPTER_RESET = 1,
109 PVSCSI_CMD_ISSUE_SCSI = 2,
110 PVSCSI_CMD_SETUP_RINGS = 3,
111 PVSCSI_CMD_RESET_BUS = 4,
112 PVSCSI_CMD_RESET_DEVICE = 5,
113 PVSCSI_CMD_ABORT_CMD = 6,
114 PVSCSI_CMD_CONFIG = 7,
115 PVSCSI_CMD_SETUP_MSG_RING = 8,
116 PVSCSI_CMD_DEVICE_UNPLUG = 9,
Rishi Mehta2a815b52014-03-11 13:51:33 -0700117 PVSCSI_CMD_SETUP_REQCALLTHRESHOLD = 10,
Alok Kataria851b1642009-10-13 14:51:05 -0700118
Rishi Mehta2a815b52014-03-11 13:51:33 -0700119 PVSCSI_CMD_LAST = 11 /* has to be last */
Alok Kataria851b1642009-10-13 14:51:05 -0700120};
121
122/*
123 * Command descriptor for PVSCSI_CMD_RESET_DEVICE --
124 */
125
126struct PVSCSICmdDescResetDevice {
127 u32 target;
128 u8 lun[8];
129} __packed;
130
131/*
Arvind Kumara9310732012-03-08 15:48:53 +0530132 * Command descriptor for PVSCSI_CMD_CONFIG --
133 */
134
135struct PVSCSICmdDescConfigCmd {
136 u64 cmpAddr;
137 u64 configPageAddress;
138 u32 configPageNum;
139 u32 _pad;
140} __packed;
141
Rishi Mehta2a815b52014-03-11 13:51:33 -0700142/*
143 * Command descriptor for PVSCSI_CMD_SETUP_REQCALLTHRESHOLD --
144 */
145
146struct PVSCSICmdDescSetupReqCall {
147 u32 enable;
148} __packed;
149
Arvind Kumara9310732012-03-08 15:48:53 +0530150enum PVSCSIConfigPageType {
151 PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
152 PVSCSI_CONFIG_PAGE_PHY = 0x1959,
153 PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
154};
155
156enum PVSCSIConfigPageAddressType {
157 PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
158 PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
159 PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
160};
161
162/*
Alok Kataria851b1642009-10-13 14:51:05 -0700163 * Command descriptor for PVSCSI_CMD_ABORT_CMD --
164 *
165 * - currently does not support specifying the LUN.
166 * - _pad should be 0.
167 */
168
169struct PVSCSICmdDescAbortCmd {
170 u64 context;
171 u32 target;
172 u32 _pad;
173} __packed;
174
175/*
176 * Command descriptor for PVSCSI_CMD_SETUP_RINGS --
177 *
178 * Notes:
179 * - reqRingNumPages and cmpRingNumPages need to be power of two.
180 * - reqRingNumPages and cmpRingNumPages need to be different from 0,
181 * - reqRingNumPages and cmpRingNumPages need to be inferior to
182 * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
183 */
184
185#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32
186struct PVSCSICmdDescSetupRings {
187 u32 reqRingNumPages;
188 u32 cmpRingNumPages;
189 u64 ringsStatePPN;
190 u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
191 u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
192} __packed;
193
194/*
195 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
196 *
197 * Notes:
198 * - this command was not supported in the initial revision of the h/w
199 * interface. Before using it, you need to check that it is supported by
200 * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
201 * immediately after read the 'command status' register:
202 * * a value of -1 means that the cmd is NOT supported,
203 * * a value != -1 means that the cmd IS supported.
204 * If it's supported the 'command status' register should return:
205 * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
206 * - this command should be issued _after_ the usual SETUP_RINGS so that the
207 * RingsState page is already setup. If not, the command is a nop.
208 * - numPages needs to be a power of two,
209 * - numPages needs to be different from 0,
210 * - _pad should be zero.
211 */
212
213#define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16
214
215struct PVSCSICmdDescSetupMsgRing {
216 u32 numPages;
217 u32 _pad;
218 u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
219} __packed;
220
221enum PVSCSIMsgType {
222 PVSCSI_MSG_DEV_ADDED = 0,
223 PVSCSI_MSG_DEV_REMOVED = 1,
224 PVSCSI_MSG_LAST = 2,
225};
226
227/*
228 * Msg descriptor.
229 *
230 * sizeof(struct PVSCSIRingMsgDesc) == 128.
231 *
232 * - type is of type enum PVSCSIMsgType.
233 * - the content of args depend on the type of event being delivered.
234 */
235
236struct PVSCSIRingMsgDesc {
237 u32 type;
238 u32 args[31];
239} __packed;
240
241struct PVSCSIMsgDescDevStatusChanged {
242 u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
243 u32 bus;
244 u32 target;
245 u8 lun[8];
246 u32 pad[27];
247} __packed;
248
249/*
250 * Rings state.
251 *
252 * - the fields:
253 * . msgProdIdx,
254 * . msgConsIdx,
255 * . msgNumEntriesLog2,
256 * .. are only used once the SETUP_MSG_RING cmd has been issued.
257 * - '_pad' helps to ensure that the msg related fields are on their own
258 * cache-line.
259 */
260
261struct PVSCSIRingsState {
262 u32 reqProdIdx;
263 u32 reqConsIdx;
264 u32 reqNumEntriesLog2;
265
266 u32 cmpProdIdx;
267 u32 cmpConsIdx;
268 u32 cmpNumEntriesLog2;
269
Rishi Mehta2a815b52014-03-11 13:51:33 -0700270 u32 reqCallThreshold;
271
272 u8 _pad[100];
Alok Kataria851b1642009-10-13 14:51:05 -0700273
274 u32 msgProdIdx;
275 u32 msgConsIdx;
276 u32 msgNumEntriesLog2;
277} __packed;
278
279/*
280 * Request descriptor.
281 *
282 * sizeof(RingReqDesc) = 128
283 *
284 * - context: is a unique identifier of a command. It could normally be any
285 * 64bit value, however we currently store it in the serialNumber variable
286 * of struct SCSI_Command, so we have the following restrictions due to the
287 * way this field is handled in the vmkernel storage stack:
288 * * this value can't be 0,
289 * * the upper 32bit need to be 0 since serialNumber is as a u32.
290 * Currently tracked as PR 292060.
291 * - dataLen: contains the total number of bytes that need to be transferred.
292 * - dataAddr:
293 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
294 * s/g table segment, each s/g segment is entirely contained on a single
295 * page of physical memory,
296 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
297 * the buffer used for the DMA transfer,
298 * - flags:
299 * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
300 * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
301 * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
302 * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
303 * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
304 * 16bytes. To be specified.
305 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the
306 * completion of the i/o. For guest OSes that use lowest priority message
307 * delivery mode (such as windows), we use this "hint" to deliver the
308 * completion action to the proper vcpu. For now, we can use the vcpuId of
309 * the processor that initiated the i/o as a likely candidate for the vcpu
310 * that will be waiting for the completion..
311 * - bus should be 0: we currently only support bus 0 for now.
312 * - unused should be zero'd.
313 */
314
315#define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0)
316#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1)
317#define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2)
318#define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3)
319#define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4)
320
321struct PVSCSIRingReqDesc {
322 u64 context;
323 u64 dataAddr;
324 u64 dataLen;
325 u64 senseAddr;
326 u32 senseLen;
327 u32 flags;
328 u8 cdb[16];
329 u8 cdbLen;
330 u8 lun[8];
331 u8 tag;
332 u8 bus;
333 u8 target;
Wentao Wangcf71d592022-06-02 08:57:00 +0000334 u16 vcpuHint;
335 u8 unused[58];
Alok Kataria851b1642009-10-13 14:51:05 -0700336} __packed;
337
338/*
339 * Scatter-gather list management.
340 *
341 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
342 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
343 * table segment.
344 *
345 * - each segment of the s/g table contain a succession of struct
346 * PVSCSISGElement.
347 * - each segment is entirely contained on a single physical page of memory.
348 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
349 * PVSCSISGElement.flags and in this case:
350 * * addr is the PA of the next s/g segment,
351 * * length is undefined, assumed to be 0.
352 */
353
354struct PVSCSISGElement {
355 u64 addr;
356 u32 length;
357 u32 flags;
358} __packed;
359
360/*
361 * Completion descriptor.
362 *
363 * sizeof(RingCmpDesc) = 32
364 *
365 * - context: identifier of the command. The same thing that was specified
366 * under "context" as part of struct RingReqDesc at initiation time,
367 * - dataLen: number of bytes transferred for the actual i/o operation,
368 * - senseLen: number of bytes written into the sense buffer,
369 * - hostStatus: adapter status,
370 * - scsiStatus: device status,
371 * - _pad should be zero.
372 */
373
374struct PVSCSIRingCmpDesc {
375 u64 context;
376 u64 dataLen;
377 u32 senseLen;
378 u16 hostStatus;
379 u16 scsiStatus;
380 u32 _pad[2];
381} __packed;
382
Arvind Kumara9310732012-03-08 15:48:53 +0530383struct PVSCSIConfigPageHeader {
384 u32 pageNum;
385 u16 numDwords;
386 u16 hostStatus;
387 u16 scsiStatus;
388 u16 reserved[3];
389} __packed;
390
391struct PVSCSIConfigPageController {
392 struct PVSCSIConfigPageHeader header;
393 u64 nodeWWN; /* Device name as defined in the SAS spec. */
394 u16 manufacturer[64];
395 u16 serialNumber[64];
396 u16 opromVersion[32];
397 u16 hwVersion[32];
398 u16 firmwareVersion[32];
399 u32 numPhys;
400 u8 useConsecutivePhyWWNs;
401 u8 reserved[3];
402} __packed;
403
Alok Kataria851b1642009-10-13 14:51:05 -0700404/*
405 * Interrupt status / IRQ bits.
406 */
407
408#define PVSCSI_INTR_CMPL_0 (1 << 0)
409#define PVSCSI_INTR_CMPL_1 (1 << 1)
410#define PVSCSI_INTR_CMPL_MASK MASK(2)
411
412#define PVSCSI_INTR_MSG_0 (1 << 2)
413#define PVSCSI_INTR_MSG_1 (1 << 3)
414#define PVSCSI_INTR_MSG_MASK (MASK(2) << 2)
415
416#define PVSCSI_INTR_ALL_SUPPORTED MASK(4)
417
418/*
419 * Number of MSI-X vectors supported.
420 */
421#define PVSCSI_MAX_INTRS 24
422
423/*
Alok Kataria851b1642009-10-13 14:51:05 -0700424 * Misc constants for the rings.
425 */
426
427#define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
428#define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
429#define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES
430
431#define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
432 (PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))
433
434#define PVSCSI_MAX_REQ_QUEUE_DEPTH \
435 (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)
436
437#define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1
438#define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
439#define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2
440#define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2
441#define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2
442
443enum PVSCSIMemSpace {
444 PVSCSI_MEM_SPACE_COMMAND_PAGE = 0,
445 PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1,
446 PVSCSI_MEM_SPACE_MISC_PAGE = 2,
447 PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4,
448 PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6,
449 PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7,
450};
451
452#define PVSCSI_MEM_SPACE_NUM_PAGES \
453 (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \
454 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \
455 PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \
456 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \
457 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)
458
459#define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
460
461#endif /* _VMW_PVSCSI_H_ */