blob: 1d4d624492fcd02a089fa1c4ae72b7b7f0df937b [file] [log] [blame]
Jens Axboe3a65dfe2005-11-04 08:43:35 +01001#
2# Block layer core configuration
3#
Jan Engelhardt16ed0022007-07-10 12:24:11 +02004menuconfig BLOCK
David Rientjes6a108a12011-01-20 14:44:16 -08005 bool "Enable the block layer" if EXPERT
David Howells93614012006-09-30 20:45:40 +02006 default y
Omar Sandoval88459642016-09-17 08:38:44 -06007 select SBITMAP
David Howells93614012006-09-30 20:45:40 +02008 help
Nick Andrewee864182008-04-21 09:51:04 +02009 Provide block layer support for the kernel.
David Howells93614012006-09-30 20:45:40 +020010
Nick Andrewee864182008-04-21 09:51:04 +020011 Disable this option to remove the block layer support from the
12 kernel. This may be useful for embedded devices.
13
14 If this option is disabled:
15
16 - block device files will become unusable
17 - some filesystems (such as ext3) will become unavailable.
18
19 Also, SCSI character devices and USB storage will be disabled since
20 they make use of various block layer definitions and facilities.
David Howells93614012006-09-30 20:45:40 +020021
22 Say Y here unless you know you really don't want to mount disks and
23 suchlike.
24
25if BLOCK
26
Bartlomiej Zolnierkiewicz90c699a2009-06-19 08:08:50 +020027config LBDAF
28 bool "Support for large (2TB+) block devices and files"
Matthew Wilcoxe6243862006-12-04 03:38:31 -070029 depends on !64BIT
Bartlomiej Zolnierkiewiczdb29a6b2009-04-21 09:27:03 +020030 default y
Jens Axboe3a65dfe2005-11-04 08:43:35 +010031 help
Jens Axboeb3a6ffe2008-12-12 09:51:16 +010032 Enable block devices or files of size 2TB and larger.
Nick Andrewee864182008-04-21 09:51:04 +020033
34 This option is required to support the full capacity of large
35 (2TB+) block devices, including RAID, disk, Network Block Device,
36 Logical Volume Manager (LVM) and loopback.
Jens Axboeb3a6ffe2008-12-12 09:51:16 +010037
38 This option also enables support for single files larger than
39 2TB.
Nick Andrewee864182008-04-21 09:51:04 +020040
Theodore Ts'o4d783b02009-01-06 15:16:33 -050041 The ext4 filesystem requires that this feature be enabled in
42 order to support filesystems that have the huge_file feature
Bartlomiej Zolnierkiewiczdb29a6b2009-04-21 09:27:03 +020043 enabled. Otherwise, it will refuse to mount in the read-write
44 mode any filesystems that use the huge_file feature, which is
45 enabled by default by mke2fs.ext4.
Theodore Ts'o4d783b02009-01-06 15:16:33 -050046
Bartlomiej Zolnierkiewiczdb29a6b2009-04-21 09:27:03 +020047 The GFS2 filesystem also requires this feature.
48
49 If unsure, say Y.
Jens Axboe3a65dfe2005-11-04 08:43:35 +010050
Jens Axboe3d6392c2007-07-09 12:38:05 +020051config BLK_DEV_BSG
John Stoffel14d9fa32009-08-04 22:10:17 +020052 bool "Block layer SG support v4"
53 default y
54 help
Nick Andrewee864182008-04-21 09:51:04 +020055 Saying Y here will enable generic SG (SCSI generic) v4 support
56 for any block device.
FUJITA Tomonori319a7b72007-07-17 12:22:09 +020057
Nick Andrewee864182008-04-21 09:51:04 +020058 Unlike SG v3 (aka block/scsi_ioctl.c drivers/scsi/sg.c), SG v4
59 can handle complicated SCSI commands: tagged variable length cdbs
60 with bidirectional data transfers and generic request/response
61 protocols (e.g. Task Management Functions and SMP in Serial
62 Attached SCSI).
63
John Stoffel14d9fa32009-08-04 22:10:17 +020064 This option is required by recent UDEV versions to properly
65 access device serial numbers, etc.
66
67 If unsure, say Y.
Jens Axboe3d6392c2007-07-09 12:38:05 +020068
Mike Christieaa387cc2011-07-31 22:05:09 +020069config BLK_DEV_BSGLIB
70 bool "Block layer SG support v4 helper lib"
71 default n
72 select BLK_DEV_BSG
73 help
74 Subsystems will normally enable this if needed. Users will not
75 normally need to manually enable this.
76
77 If unsure, say N.
78
Martin K. Petersen7ba1ba12008-06-30 20:04:41 +020079config BLK_DEV_INTEGRITY
80 bool "Block layer data integrity support"
Martin K. Petersen2341c2f82014-09-26 19:20:07 -040081 select CRC_T10DIF if BLK_DEV_INTEGRITY
Martin K. Petersen7ba1ba12008-06-30 20:04:41 +020082 ---help---
83 Some storage devices allow extra information to be
84 stored/retrieved to help protect the data. The block layer
85 data integrity option provides hooks which can be used by
86 filesystems to ensure better data integrity.
87
88 Say yes here if you have a storage device that provides the
89 T10/SCSI Data Integrity Field or the T13/ATA External Path
90 Protection. If in doubt, say N.
91
Vivek Goyale43473b2010-09-15 17:06:35 -040092config BLK_DEV_THROTTLING
93 bool "Block layer bio throttling support"
Kees Cook8e42e0a2012-10-23 13:01:46 -070094 depends on BLK_CGROUP=y
Vivek Goyale43473b2010-09-15 17:06:35 -040095 default n
96 ---help---
97 Block layer bio throttling support. It can be used to limit
98 the IO rate to a device. IO rate policies are per cgroup and
99 one needs to mount and use blkio cgroup controller for creating
100 cgroups and specifying per device IO rate policies.
101
102 See Documentation/cgroups/blkio-controller.txt for more information.
103
Paul Gortmaker080506a2013-09-30 13:45:19 -0700104config BLK_CMDLINE_PARSER
Cai Zhiyongbab55412013-09-11 14:20:09 -0700105 bool "Block device command line partition parser"
106 default n
107 ---help---
Paul Gortmaker080506a2013-09-30 13:45:19 -0700108 Enabling this option allows you to specify the partition layout from
109 the kernel boot args. This is typically of use for embedded devices
110 which don't otherwise have any standardized method for listing the
111 partitions on a block device.
112
113 See Documentation/block/cmdline-partition.txt for more information.
Cai Zhiyongbab55412013-09-11 14:20:09 -0700114
Al Viro9be96f32011-09-16 00:25:05 -0400115menu "Partition Types"
116
117source "block/partitions/Kconfig"
118
119endmenu
120
Linus Torvalds2b9e0aa2007-10-12 17:58:36 -0700121endif # BLOCK
122
Jens Axboe99874d52007-10-12 12:50:41 +0200123config BLOCK_COMPAT
124 bool
Linus Torvalds2b9e0aa2007-10-12 17:58:36 -0700125 depends on BLOCK && COMPAT
Jens Axboe99874d52007-10-12 12:50:41 +0200126 default y
127
Stephen Rothwell8ec2ef22016-09-19 15:50:16 +1000128config BLK_MQ_PCI
129 bool
130 depends on BLOCK && PCI
131 default y
132
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100133source block/Kconfig.iosched