Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1 | /* |
| 2 | * MUSB OTG driver defines |
| 3 | * |
| 4 | * Copyright 2005 Mentor Graphics Corporation |
| 5 | * Copyright (C) 2005-2006 by Texas Instruments |
| 6 | * Copyright (C) 2006-2007 Nokia Corporation |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 20 | * 02110-1301 USA |
| 21 | * |
| 22 | * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| 23 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 24 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 25 | * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 26 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 27 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 28 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 29 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 30 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 31 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 32 | * |
| 33 | */ |
| 34 | |
| 35 | #ifndef __MUSB_CORE_H__ |
| 36 | #define __MUSB_CORE_H__ |
| 37 | |
| 38 | #include <linux/slab.h> |
| 39 | #include <linux/list.h> |
| 40 | #include <linux/interrupt.h> |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 41 | #include <linux/errno.h> |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 42 | #include <linux/timer.h> |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 43 | #include <linux/clk.h> |
| 44 | #include <linux/device.h> |
| 45 | #include <linux/usb/ch9.h> |
| 46 | #include <linux/usb/gadget.h> |
| 47 | #include <linux/usb.h> |
| 48 | #include <linux/usb/otg.h> |
| 49 | #include <linux/usb/musb.h> |
| 50 | |
| 51 | struct musb; |
| 52 | struct musb_hw_ep; |
| 53 | struct musb_ep; |
| 54 | |
Cliff Cai | 0ded2f1 | 2010-01-28 20:43:44 -0500 | [diff] [blame] | 55 | /* Helper defines for struct musb->hwvers */ |
| 56 | #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) |
| 57 | #define MUSB_HWVERS_MINOR(x) (x & 0x3ff) |
| 58 | #define MUSB_HWVERS_RC 0x8000 |
| 59 | #define MUSB_HWVERS_1300 0x52C |
| 60 | #define MUSB_HWVERS_1400 0x590 |
| 61 | #define MUSB_HWVERS_1800 0x720 |
| 62 | #define MUSB_HWVERS_1900 0x784 |
| 63 | #define MUSB_HWVERS_2000 0x800 |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 64 | |
| 65 | #include "musb_debug.h" |
| 66 | #include "musb_dma.h" |
| 67 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 68 | #include "musb_io.h" |
| 69 | #include "musb_regs.h" |
| 70 | |
| 71 | #include "musb_gadget.h" |
| 72 | #include "../core/hcd.h" |
| 73 | #include "musb_host.h" |
| 74 | |
| 75 | |
| 76 | |
| 77 | #ifdef CONFIG_USB_MUSB_OTG |
| 78 | |
| 79 | #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) |
| 80 | #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) |
| 81 | #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) |
| 82 | |
| 83 | /* NOTE: otg and peripheral-only state machines start at B_IDLE. |
| 84 | * OTG or host-only go to A_IDLE when ID is sensed. |
| 85 | */ |
| 86 | #define is_peripheral_active(m) (!(m)->is_host) |
| 87 | #define is_host_active(m) ((m)->is_host) |
| 88 | |
| 89 | #else |
| 90 | #define is_peripheral_enabled(musb) is_peripheral_capable() |
| 91 | #define is_host_enabled(musb) is_host_capable() |
| 92 | #define is_otg_enabled(musb) 0 |
| 93 | |
| 94 | #define is_peripheral_active(musb) is_peripheral_capable() |
| 95 | #define is_host_active(musb) is_host_capable() |
| 96 | #endif |
| 97 | |
| 98 | #if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL) |
| 99 | /* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always |
| 100 | * override that choice selection (often USB_GADGET_DUMMY_HCD). |
| 101 | */ |
| 102 | #ifndef CONFIG_USB_GADGET_MUSB_HDRC |
| 103 | #error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC |
| 104 | #endif |
| 105 | #endif /* need MUSB gadget selection */ |
| 106 | |
Mike Frysinger | b20cf90 | 2009-09-16 21:10:53 -0400 | [diff] [blame] | 107 | #ifndef CONFIG_HAVE_CLK |
| 108 | /* Dummy stub for clk framework */ |
| 109 | #define clk_get(dev, id) NULL |
| 110 | #define clk_put(clock) do {} while (0) |
| 111 | #define clk_enable(clock) do {} while (0) |
| 112 | #define clk_disable(clock) do {} while (0) |
| 113 | #endif |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 114 | |
| 115 | #ifdef CONFIG_PROC_FS |
| 116 | #include <linux/fs.h> |
| 117 | #define MUSB_CONFIG_PROC_FS |
| 118 | #endif |
| 119 | |
| 120 | /****************************** PERIPHERAL ROLE *****************************/ |
| 121 | |
| 122 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 123 | |
| 124 | #define is_peripheral_capable() (1) |
| 125 | |
| 126 | extern irqreturn_t musb_g_ep0_irq(struct musb *); |
| 127 | extern void musb_g_tx(struct musb *, u8); |
| 128 | extern void musb_g_rx(struct musb *, u8); |
| 129 | extern void musb_g_reset(struct musb *); |
| 130 | extern void musb_g_suspend(struct musb *); |
| 131 | extern void musb_g_resume(struct musb *); |
| 132 | extern void musb_g_wakeup(struct musb *); |
| 133 | extern void musb_g_disconnect(struct musb *); |
| 134 | |
| 135 | #else |
| 136 | |
| 137 | #define is_peripheral_capable() (0) |
| 138 | |
| 139 | static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| 140 | static inline void musb_g_reset(struct musb *m) {} |
| 141 | static inline void musb_g_suspend(struct musb *m) {} |
| 142 | static inline void musb_g_resume(struct musb *m) {} |
| 143 | static inline void musb_g_wakeup(struct musb *m) {} |
| 144 | static inline void musb_g_disconnect(struct musb *m) {} |
| 145 | |
| 146 | #endif |
| 147 | |
| 148 | /****************************** HOST ROLE ***********************************/ |
| 149 | |
| 150 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 151 | |
| 152 | #define is_host_capable() (1) |
| 153 | |
| 154 | extern irqreturn_t musb_h_ep0_irq(struct musb *); |
| 155 | extern void musb_host_tx(struct musb *, u8); |
| 156 | extern void musb_host_rx(struct musb *, u8); |
| 157 | |
| 158 | #else |
| 159 | |
| 160 | #define is_host_capable() (0) |
| 161 | |
| 162 | static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| 163 | static inline void musb_host_tx(struct musb *m, u8 e) {} |
| 164 | static inline void musb_host_rx(struct musb *m, u8 e) {} |
| 165 | |
| 166 | #endif |
| 167 | |
| 168 | |
| 169 | /****************************** CONSTANTS ********************************/ |
| 170 | |
| 171 | #ifndef MUSB_C_NUM_EPS |
| 172 | #define MUSB_C_NUM_EPS ((u8)16) |
| 173 | #endif |
| 174 | |
| 175 | #ifndef MUSB_MAX_END0_PACKET |
| 176 | #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE) |
| 177 | #endif |
| 178 | |
| 179 | /* host side ep0 states */ |
| 180 | enum musb_h_ep0_state { |
| 181 | MUSB_EP0_IDLE, |
| 182 | MUSB_EP0_START, /* expect ack of setup */ |
| 183 | MUSB_EP0_IN, /* expect IN DATA */ |
| 184 | MUSB_EP0_OUT, /* expect ack of OUT DATA */ |
| 185 | MUSB_EP0_STATUS, /* expect ack of STATUS */ |
| 186 | } __attribute__ ((packed)); |
| 187 | |
| 188 | /* peripheral side ep0 states */ |
| 189 | enum musb_g_ep0_state { |
Sergei Shtylyov | a5073b5 | 2009-03-27 12:52:43 -0700 | [diff] [blame] | 190 | MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */ |
| 191 | MUSB_EP0_STAGE_SETUP, /* received SETUP */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 192 | MUSB_EP0_STAGE_TX, /* IN data */ |
| 193 | MUSB_EP0_STAGE_RX, /* OUT data */ |
| 194 | MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ |
| 195 | MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */ |
| 196 | MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ |
| 197 | } __attribute__ ((packed)); |
| 198 | |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 199 | /* |
| 200 | * OTG protocol constants. See USB OTG 1.3 spec, |
| 201 | * sections 5.5 "Device Timings" and 6.6.5 "Timers". |
| 202 | */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 203 | #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 204 | #define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */ |
| 205 | #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ |
| 206 | #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ |
| 207 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 208 | |
| 209 | /*************************** REGISTER ACCESS ********************************/ |
| 210 | |
| 211 | /* Endpoint registers (other than dynfifo setup) can be accessed either |
| 212 | * directly with the "flat" model, or after setting up an index register. |
| 213 | */ |
| 214 | |
| 215 | #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \ |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 216 | || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 217 | /* REVISIT indexed access seemed to |
| 218 | * misbehave (on DaVinci) for at least peripheral IN ... |
| 219 | */ |
| 220 | #define MUSB_FLAT_REG |
| 221 | #endif |
| 222 | |
| 223 | /* TUSB mapping: "flat" plus ep0 special cases */ |
| 224 | #if defined(CONFIG_USB_TUSB6010) |
| 225 | #define musb_ep_select(_mbase, _epnum) \ |
| 226 | musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| 227 | #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET |
| 228 | |
| 229 | /* "flat" mapping: each endpoint has its own i/o address */ |
| 230 | #elif defined(MUSB_FLAT_REG) |
| 231 | #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum))) |
| 232 | #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET |
| 233 | |
| 234 | /* "indexed" mapping: INDEX register controls register bank select */ |
| 235 | #else |
| 236 | #define musb_ep_select(_mbase, _epnum) \ |
| 237 | musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| 238 | #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET |
| 239 | #endif |
| 240 | |
| 241 | /****************************** FUNCTIONS ********************************/ |
| 242 | |
| 243 | #define MUSB_HST_MODE(_musb)\ |
| 244 | { (_musb)->is_host = true; } |
| 245 | #define MUSB_DEV_MODE(_musb) \ |
| 246 | { (_musb)->is_host = false; } |
| 247 | |
| 248 | #define test_devctl_hst_mode(_x) \ |
| 249 | (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM) |
| 250 | |
| 251 | #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral") |
| 252 | |
| 253 | /******************************** TYPES *************************************/ |
| 254 | |
| 255 | /* |
| 256 | * struct musb_hw_ep - endpoint hardware (bidirectional) |
| 257 | * |
| 258 | * Ordered slightly for better cacheline locality. |
| 259 | */ |
| 260 | struct musb_hw_ep { |
| 261 | struct musb *musb; |
| 262 | void __iomem *fifo; |
| 263 | void __iomem *regs; |
| 264 | |
| 265 | #ifdef CONFIG_USB_TUSB6010 |
| 266 | void __iomem *conf; |
| 267 | #endif |
| 268 | |
| 269 | /* index in musb->endpoints[] */ |
| 270 | u8 epnum; |
| 271 | |
| 272 | /* hardware configuration, possibly dynamic */ |
| 273 | bool is_shared_fifo; |
| 274 | bool tx_double_buffered; |
| 275 | bool rx_double_buffered; |
| 276 | u16 max_packet_sz_tx; |
| 277 | u16 max_packet_sz_rx; |
| 278 | |
| 279 | struct dma_channel *tx_channel; |
| 280 | struct dma_channel *rx_channel; |
| 281 | |
| 282 | #ifdef CONFIG_USB_TUSB6010 |
| 283 | /* TUSB has "asynchronous" and "synchronous" dma modes */ |
| 284 | dma_addr_t fifo_async; |
| 285 | dma_addr_t fifo_sync; |
| 286 | void __iomem *fifo_sync_va; |
| 287 | #endif |
| 288 | |
| 289 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 290 | void __iomem *target_regs; |
| 291 | |
| 292 | /* currently scheduled peripheral endpoint */ |
| 293 | struct musb_qh *in_qh; |
| 294 | struct musb_qh *out_qh; |
| 295 | |
| 296 | u8 rx_reinit; |
| 297 | u8 tx_reinit; |
| 298 | #endif |
| 299 | |
| 300 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 301 | /* peripheral side */ |
| 302 | struct musb_ep ep_in; /* TX */ |
| 303 | struct musb_ep ep_out; /* RX */ |
| 304 | #endif |
| 305 | }; |
| 306 | |
| 307 | static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) |
| 308 | { |
| 309 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 310 | return next_request(&hw_ep->ep_in); |
| 311 | #else |
| 312 | return NULL; |
| 313 | #endif |
| 314 | } |
| 315 | |
| 316 | static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep) |
| 317 | { |
| 318 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 319 | return next_request(&hw_ep->ep_out); |
| 320 | #else |
| 321 | return NULL; |
| 322 | #endif |
| 323 | } |
| 324 | |
| 325 | /* |
| 326 | * struct musb - Driver instance data. |
| 327 | */ |
| 328 | struct musb { |
| 329 | /* device lock */ |
| 330 | spinlock_t lock; |
| 331 | struct clk *clock; |
| 332 | irqreturn_t (*isr)(int, void *); |
| 333 | struct work_struct irq_work; |
Anand Gadiyar | 32c3b94 | 2009-11-16 21:09:21 +0530 | [diff] [blame] | 334 | u16 hwvers; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 335 | |
| 336 | /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ |
| 337 | #define MUSB_PORT_STAT_RESUME (1 << 31) |
| 338 | |
| 339 | u32 port1_status; |
| 340 | |
| 341 | #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| 342 | unsigned long rh_timer; |
| 343 | |
| 344 | enum musb_h_ep0_state ep0_stage; |
| 345 | |
| 346 | /* bulk traffic normally dedicates endpoint hardware, and each |
| 347 | * direction has its own ring of host side endpoints. |
| 348 | * we try to progress the transfer at the head of each endpoint's |
| 349 | * queue until it completes or NAKs too much; then we try the next |
| 350 | * endpoint. |
| 351 | */ |
| 352 | struct musb_hw_ep *bulk_ep; |
| 353 | |
| 354 | struct list_head control; /* of musb_qh */ |
| 355 | struct list_head in_bulk; /* of musb_qh */ |
| 356 | struct list_head out_bulk; /* of musb_qh */ |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 357 | |
| 358 | struct timer_list otg_timer; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 359 | #endif |
| 360 | |
| 361 | /* called with IRQs blocked; ON/nonzero implies starting a session, |
| 362 | * and waiting at least a_wait_vrise_tmout. |
| 363 | */ |
| 364 | void (*board_set_vbus)(struct musb *, int is_on); |
| 365 | |
| 366 | struct dma_controller *dma_controller; |
| 367 | |
| 368 | struct device *controller; |
| 369 | void __iomem *ctrl_base; |
| 370 | void __iomem *mregs; |
| 371 | |
| 372 | #ifdef CONFIG_USB_TUSB6010 |
| 373 | dma_addr_t async; |
| 374 | dma_addr_t sync; |
| 375 | void __iomem *sync_va; |
| 376 | #endif |
| 377 | |
| 378 | /* passed down from chip/board specific irq handlers */ |
| 379 | u8 int_usb; |
| 380 | u16 int_rx; |
| 381 | u16 int_tx; |
| 382 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 383 | struct otg_transceiver *xceiv; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 384 | |
| 385 | int nIrq; |
Felipe Balbi | c48a515 | 2008-11-24 13:06:53 +0200 | [diff] [blame] | 386 | unsigned irq_wake:1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 387 | |
| 388 | struct musb_hw_ep endpoints[MUSB_C_NUM_EPS]; |
| 389 | #define control_ep endpoints |
| 390 | |
| 391 | #define VBUSERR_RETRY_COUNT 3 |
| 392 | u16 vbuserr_retry; |
| 393 | u16 epmask; |
| 394 | u8 nr_endpoints; |
| 395 | |
| 396 | u8 board_mode; /* enum musb_mode */ |
| 397 | int (*board_set_power)(int state); |
| 398 | |
| 399 | int (*set_clock)(struct clk *clk, int is_active); |
| 400 | |
| 401 | u8 min_power; /* vbus for periph, in mA/2 */ |
| 402 | |
| 403 | bool is_host; |
| 404 | |
| 405 | int a_wait_bcon; /* VBUS timeout in msecs */ |
| 406 | unsigned long idle_timeout; /* Next timeout in jiffies */ |
| 407 | |
| 408 | /* active means connected and not suspended */ |
| 409 | unsigned is_active:1; |
| 410 | |
| 411 | unsigned is_multipoint:1; |
| 412 | unsigned ignore_disconnect:1; /* during bus resets */ |
| 413 | |
Ajay Kumar Gupta | a483d70 | 2009-04-03 16:16:17 -0700 | [diff] [blame] | 414 | unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ |
| 415 | unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ |
Ajay Kumar Gupta | 51bf0d0 | 2009-12-28 13:40:41 +0200 | [diff] [blame] | 416 | unsigned dyn_fifo:1; /* dynamic FIFO supported? */ |
Ajay Kumar Gupta | a483d70 | 2009-04-03 16:16:17 -0700 | [diff] [blame] | 417 | |
Felipe Balbi | 7ed069c | 2009-12-15 11:08:39 +0200 | [diff] [blame] | 418 | unsigned bulk_split:1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 419 | #define can_bulk_split(musb,type) \ |
Felipe Balbi | 7ed069c | 2009-12-15 11:08:39 +0200 | [diff] [blame] | 420 | (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 421 | |
Felipe Balbi | 7ed069c | 2009-12-15 11:08:39 +0200 | [diff] [blame] | 422 | unsigned bulk_combine:1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 423 | #define can_bulk_combine(musb,type) \ |
Felipe Balbi | 7ed069c | 2009-12-15 11:08:39 +0200 | [diff] [blame] | 424 | (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 425 | |
| 426 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 427 | /* is_suspended means USB B_PERIPHERAL suspend */ |
| 428 | unsigned is_suspended:1; |
| 429 | |
| 430 | /* may_wakeup means remote wakeup is enabled */ |
| 431 | unsigned may_wakeup:1; |
| 432 | |
| 433 | /* is_self_powered is reported in device status and the |
| 434 | * config descriptor. is_bus_powered means B_PERIPHERAL |
| 435 | * draws some VBUS current; both can be true. |
| 436 | */ |
| 437 | unsigned is_self_powered:1; |
| 438 | unsigned is_bus_powered:1; |
| 439 | |
| 440 | unsigned set_address:1; |
| 441 | unsigned test_mode:1; |
| 442 | unsigned softconnect:1; |
| 443 | |
| 444 | u8 address; |
| 445 | u8 test_mode_nr; |
| 446 | u16 ackpend; /* ep0 */ |
| 447 | enum musb_g_ep0_state ep0_state; |
| 448 | struct usb_gadget g; /* the gadget */ |
| 449 | struct usb_gadget_driver *gadget_driver; /* its driver */ |
| 450 | #endif |
| 451 | |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 452 | struct musb_hdrc_config *config; |
| 453 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 454 | #ifdef MUSB_CONFIG_PROC_FS |
| 455 | struct proc_dir_entry *proc_entry; |
| 456 | #endif |
| 457 | }; |
| 458 | |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 459 | #ifdef CONFIG_PM |
| 460 | struct musb_csr_regs { |
| 461 | /* FIFO registers */ |
| 462 | u16 txmaxp, txcsr, rxmaxp, rxcsr; |
| 463 | u16 rxfifoadd, txfifoadd; |
| 464 | u8 txtype, txinterval, rxtype, rxinterval; |
| 465 | u8 rxfifosz, txfifosz; |
| 466 | u8 txfunaddr, txhubaddr, txhubport; |
| 467 | u8 rxfunaddr, rxhubaddr, rxhubport; |
| 468 | }; |
| 469 | |
| 470 | struct musb_context_registers { |
| 471 | |
Tony Lindgren | 9957dd9 | 2010-03-12 10:35:20 +0200 | [diff] [blame] | 472 | #ifdef CONFIG_PM |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 473 | u32 otg_sysconfig, otg_forcestandby; |
| 474 | #endif |
| 475 | u8 power; |
| 476 | u16 intrtxe, intrrxe; |
| 477 | u8 intrusbe; |
| 478 | u16 frame; |
| 479 | u8 index, testmode; |
| 480 | |
| 481 | u8 devctl, misc; |
| 482 | |
| 483 | struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; |
| 484 | }; |
| 485 | |
Tony Lindgren | 9957dd9 | 2010-03-12 10:35:20 +0200 | [diff] [blame] | 486 | #ifdef CONFIG_PM |
Felipe Balbi | 8573e6a | 2010-01-21 15:33:53 +0200 | [diff] [blame] | 487 | extern void musb_platform_save_context(struct musb *musb, |
| 488 | struct musb_context_registers *musb_context); |
| 489 | extern void musb_platform_restore_context(struct musb *musb, |
| 490 | struct musb_context_registers *musb_context); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 491 | #else |
Felipe Balbi | 8573e6a | 2010-01-21 15:33:53 +0200 | [diff] [blame] | 492 | #define musb_platform_save_context(m, x) do {} while (0) |
| 493 | #define musb_platform_restore_context(m, x) do {} while (0) |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 494 | #endif |
| 495 | |
| 496 | #endif |
| 497 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 498 | static inline void musb_set_vbus(struct musb *musb, int is_on) |
| 499 | { |
| 500 | musb->board_set_vbus(musb, is_on); |
| 501 | } |
| 502 | |
| 503 | #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| 504 | static inline struct musb *gadget_to_musb(struct usb_gadget *g) |
| 505 | { |
| 506 | return container_of(g, struct musb, g); |
| 507 | } |
| 508 | #endif |
| 509 | |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 510 | #ifdef CONFIG_BLACKFIN |
| 511 | static inline int musb_read_fifosize(struct musb *musb, |
| 512 | struct musb_hw_ep *hw_ep, u8 epnum) |
| 513 | { |
| 514 | musb->nr_endpoints++; |
| 515 | musb->epmask |= (1 << epnum); |
| 516 | |
| 517 | if (epnum < 5) { |
| 518 | hw_ep->max_packet_sz_tx = 128; |
| 519 | hw_ep->max_packet_sz_rx = 128; |
| 520 | } else { |
| 521 | hw_ep->max_packet_sz_tx = 1024; |
| 522 | hw_ep->max_packet_sz_rx = 1024; |
| 523 | } |
| 524 | hw_ep->is_shared_fifo = false; |
| 525 | |
| 526 | return 0; |
| 527 | } |
| 528 | |
| 529 | static inline void musb_configure_ep0(struct musb *musb) |
| 530 | { |
| 531 | musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; |
| 532 | musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; |
| 533 | musb->endpoints[0].is_shared_fifo = true; |
| 534 | } |
| 535 | |
| 536 | #else |
| 537 | |
| 538 | static inline int musb_read_fifosize(struct musb *musb, |
| 539 | struct musb_hw_ep *hw_ep, u8 epnum) |
| 540 | { |
Giuseppe GORGOGLIONE | 3223371 | 2009-02-24 15:27:34 -0800 | [diff] [blame] | 541 | void *mbase = musb->mregs; |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 542 | u8 reg = 0; |
| 543 | |
| 544 | /* read from core using indexed model */ |
Giuseppe GORGOGLIONE | 3223371 | 2009-02-24 15:27:34 -0800 | [diff] [blame] | 545 | reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE)); |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 546 | /* 0's returned when no more endpoints */ |
| 547 | if (!reg) |
| 548 | return -ENODEV; |
| 549 | |
| 550 | musb->nr_endpoints++; |
| 551 | musb->epmask |= (1 << epnum); |
| 552 | |
| 553 | hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f); |
| 554 | |
| 555 | /* shared TX/RX FIFO? */ |
| 556 | if ((reg & 0xf0) == 0xf0) { |
| 557 | hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx; |
| 558 | hw_ep->is_shared_fifo = true; |
| 559 | return 0; |
| 560 | } else { |
| 561 | hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4); |
| 562 | hw_ep->is_shared_fifo = false; |
| 563 | } |
| 564 | |
| 565 | return 0; |
| 566 | } |
| 567 | |
| 568 | static inline void musb_configure_ep0(struct musb *musb) |
| 569 | { |
| 570 | musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; |
| 571 | musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; |
Giuseppe GORGOGLIONE | 3223371 | 2009-02-24 15:27:34 -0800 | [diff] [blame] | 572 | musb->endpoints[0].is_shared_fifo = true; |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 573 | } |
| 574 | #endif /* CONFIG_BLACKFIN */ |
| 575 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 576 | |
| 577 | /***************************** Glue it together *****************************/ |
| 578 | |
| 579 | extern const char musb_driver_name[]; |
| 580 | |
| 581 | extern void musb_start(struct musb *musb); |
| 582 | extern void musb_stop(struct musb *musb); |
| 583 | |
| 584 | extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); |
| 585 | extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); |
| 586 | |
| 587 | extern void musb_load_testpacket(struct musb *); |
| 588 | |
| 589 | extern irqreturn_t musb_interrupt(struct musb *); |
| 590 | |
| 591 | extern void musb_platform_enable(struct musb *musb); |
| 592 | extern void musb_platform_disable(struct musb *musb); |
| 593 | |
| 594 | extern void musb_hnp_stop(struct musb *musb); |
| 595 | |
David Brownell | 96a274d | 2008-11-24 13:06:47 +0200 | [diff] [blame] | 596 | extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 597 | |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 598 | #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ |
Tony Lindgren | a8eb7ca | 2010-02-12 12:26:48 -0800 | [diff] [blame] | 599 | defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 600 | extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); |
| 601 | #else |
| 602 | #define musb_platform_try_idle(x, y) do {} while (0) |
| 603 | #endif |
| 604 | |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 605 | #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 606 | extern int musb_platform_get_vbus_status(struct musb *musb); |
| 607 | #else |
| 608 | #define musb_platform_get_vbus_status(x) 0 |
| 609 | #endif |
| 610 | |
| 611 | extern int __init musb_platform_init(struct musb *musb); |
| 612 | extern int musb_platform_exit(struct musb *musb); |
| 613 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 614 | #endif /* __MUSB_CORE_H__ */ |