Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | menu "Code maturity level options" |
| 2 | |
| 3 | config EXPERIMENTAL |
| 4 | bool "Prompt for development and/or incomplete code/drivers" |
| 5 | ---help--- |
| 6 | Some of the various things that Linux supports (such as network |
| 7 | drivers, file systems, network protocols, etc.) can be in a state |
| 8 | of development where the functionality, stability, or the level of |
| 9 | testing is not yet high enough for general use. This is usually |
| 10 | known as the "alpha-test" phase among developers. If a feature is |
| 11 | currently in alpha-test, then the developers usually discourage |
| 12 | uninformed widespread use of this feature by the general public to |
| 13 | avoid "Why doesn't this work?" type mail messages. However, active |
| 14 | testing and use of these systems is welcomed. Just be aware that it |
| 15 | may not meet the normal level of reliability or it may fail to work |
| 16 | in some special cases. Detailed bug reports from people familiar |
| 17 | with the kernel internals are usually welcomed by the developers |
| 18 | (before submitting bug reports, please read the documents |
| 19 | <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>, |
| 20 | <file:Documentation/BUG-HUNTING>, and |
| 21 | <file:Documentation/oops-tracing.txt> in the kernel source). |
| 22 | |
| 23 | This option will also make obsoleted drivers available. These are |
| 24 | drivers that have been replaced by something else, and/or are |
| 25 | scheduled to be removed in a future kernel release. |
| 26 | |
| 27 | Unless you intend to help test and develop a feature or driver that |
| 28 | falls into this category, or you have a situation that requires |
| 29 | using these features, you should probably say N here, which will |
| 30 | cause the configurator to present you with fewer choices. If |
| 31 | you say Y here, you will be offered the choice of using features or |
| 32 | drivers that are currently considered to be in the alpha-test phase. |
| 33 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 34 | config BROKEN |
| 35 | bool |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 36 | |
| 37 | config BROKEN_ON_SMP |
| 38 | bool |
| 39 | depends on BROKEN || !SMP |
| 40 | default y |
| 41 | |
| 42 | config LOCK_KERNEL |
| 43 | bool |
| 44 | depends on SMP || PREEMPT |
| 45 | default y |
| 46 | |
| 47 | config INIT_ENV_ARG_LIMIT |
| 48 | int |
| 49 | default 32 if !USERMODE |
| 50 | default 128 if USERMODE |
| 51 | help |
Randy Dunlap | 34ad92c2 | 2005-10-30 15:01:46 -0800 | [diff] [blame] | 52 | Maximum of each of the number of arguments and environment |
| 53 | variables passed to init from the kernel command line. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 54 | |
| 55 | endmenu |
| 56 | |
| 57 | menu "General setup" |
| 58 | |
| 59 | config LOCALVERSION |
| 60 | string "Local version - append to kernel release" |
| 61 | help |
| 62 | Append an extra string to the end of your kernel version. |
| 63 | This will show up when you type uname, for example. |
| 64 | The string you set here will be appended after the contents of |
| 65 | any files with a filename matching localversion* in your |
| 66 | object and source tree, in that order. Your total string can |
| 67 | be a maximum of 64 characters. |
| 68 | |
Ryan Anderson | aaebf43 | 2005-07-31 04:57:49 -0400 | [diff] [blame] | 69 | config LOCALVERSION_AUTO |
| 70 | bool "Automatically append version information to the version string" |
| 71 | default y |
| 72 | help |
| 73 | This will try to automatically determine if the current tree is a |
| 74 | release tree by looking for git tags that |
| 75 | belong to the current top of tree revision. |
| 76 | |
| 77 | A string of the format -gxxxxxxxx will be added to the localversion |
| 78 | if a git based tree is found. The string generated by this will be |
| 79 | appended after any matching localversion* files, and after the value |
| 80 | set in CONFIG_LOCALVERSION |
| 81 | |
| 82 | Note: This requires Perl, and a git repository, but not necessarily |
| 83 | the git or cogito tools to be installed. |
| 84 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 85 | config SWAP |
| 86 | bool "Support for paging of anonymous memory (swap)" |
| 87 | depends on MMU |
| 88 | default y |
| 89 | help |
| 90 | This option allows you to choose whether you want to have support |
Jesper Juhl | 92c3504 | 2006-01-15 02:40:08 +0100 | [diff] [blame] | 91 | for so called swap devices or swap files in your kernel that are |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 92 | used to provide more virtual memory than the actual RAM present |
| 93 | in your computer. If unsure say Y. |
| 94 | |
| 95 | config SYSVIPC |
| 96 | bool "System V IPC" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 97 | ---help--- |
| 98 | Inter Process Communication is a suite of library functions and |
| 99 | system calls which let processes (running programs) synchronize and |
| 100 | exchange information. It is generally considered to be a good thing, |
| 101 | and some programs won't run unless you say Y here. In particular, if |
| 102 | you want to run the DOS emulator dosemu under Linux (read the |
| 103 | DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>), |
| 104 | you'll need to say Y here. |
| 105 | |
| 106 | You can find documentation about IPC with "info ipc" and also in |
| 107 | section 6.4 of the Linux Programmer's Guide, available from |
| 108 | <http://www.tldp.org/guides.html>. |
| 109 | |
| 110 | config POSIX_MQUEUE |
| 111 | bool "POSIX Message Queues" |
| 112 | depends on NET && EXPERIMENTAL |
| 113 | ---help--- |
| 114 | POSIX variant of message queues is a part of IPC. In POSIX message |
| 115 | queues every message has a priority which decides about succession |
| 116 | of receiving it by a process. If you want to compile and run |
| 117 | programs written e.g. for Solaris with use of its POSIX message |
| 118 | queues (functions mq_*) say Y here. To use this feature you will |
| 119 | also need mqueue library, available from |
| 120 | <http://www.mat.uni.torun.pl/~wrona/posix_ipc/> |
| 121 | |
| 122 | POSIX message queues are visible as a filesystem called 'mqueue' |
| 123 | and can be mounted somewhere if you want to do filesystem |
| 124 | operations on message queues. |
| 125 | |
| 126 | If unsure, say Y. |
| 127 | |
| 128 | config BSD_PROCESS_ACCT |
| 129 | bool "BSD Process Accounting" |
| 130 | help |
| 131 | If you say Y here, a user level program will be able to instruct the |
| 132 | kernel (via a special system call) to write process accounting |
| 133 | information to a file: whenever a process exits, information about |
| 134 | that process will be appended to the file by the kernel. The |
| 135 | information includes things such as creation time, owning user, |
| 136 | command name, memory usage, controlling terminal etc. (the complete |
| 137 | list is in the struct acct in <file:include/linux/acct.h>). It is |
| 138 | up to the user level program to do useful things with this |
| 139 | information. This is generally a good idea, so say Y. |
| 140 | |
| 141 | config BSD_PROCESS_ACCT_V3 |
| 142 | bool "BSD Process Accounting version 3 file format" |
| 143 | depends on BSD_PROCESS_ACCT |
| 144 | default n |
| 145 | help |
| 146 | If you say Y here, the process accounting information is written |
| 147 | in a new file format that also logs the process IDs of each |
| 148 | process and it's parent. Note that this file format is incompatible |
| 149 | with previous v0/v1/v2 file formats, so you will need updated tools |
| 150 | for processing it. A preliminary version of these tools is available |
| 151 | at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>. |
| 152 | |
| 153 | config SYSCTL |
| 154 | bool "Sysctl support" |
| 155 | ---help--- |
| 156 | The sysctl interface provides a means of dynamically changing |
| 157 | certain kernel parameters and variables on the fly without requiring |
| 158 | a recompile of the kernel or reboot of the system. The primary |
| 159 | interface consists of a system call, but if you say Y to "/proc |
| 160 | file system support", a tree of modifiable sysctl entries will be |
| 161 | generated beneath the /proc/sys directory. They are explained in the |
| 162 | files in <file:Documentation/sysctl/>. Note that enabling this |
| 163 | option will enlarge the kernel by at least 8 KB. |
| 164 | |
| 165 | As it is generally a good thing, you should say Y here unless |
| 166 | building a kernel for install/rescue disks or your system is very |
| 167 | limited in memory. |
| 168 | |
| 169 | config AUDIT |
| 170 | bool "Auditing support" |
Chris Wright | 804a6a49 | 2005-05-11 10:52:45 +0100 | [diff] [blame] | 171 | depends on NET |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 172 | help |
| 173 | Enable auditing infrastructure that can be used with another |
| 174 | kernel subsystem, such as SELinux (which requires this for |
| 175 | logging of avc messages output). Does not do system-call |
| 176 | auditing without CONFIG_AUDITSYSCALL. |
| 177 | |
| 178 | config AUDITSYSCALL |
| 179 | bool "Enable system-call auditing support" |
Martin Schwidefsky | 347a8dc | 2006-01-06 00:19:28 -0800 | [diff] [blame] | 180 | depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 181 | default y if SECURITY_SELINUX |
| 182 | help |
| 183 | Enable low-overhead system-call auditing infrastructure that |
| 184 | can be used independently or with another kernel subsystem, |
| 185 | such as SELinux. |
| 186 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 187 | config IKCONFIG |
| 188 | bool "Kernel .config support" |
| 189 | ---help--- |
| 190 | This option enables the complete Linux kernel ".config" file |
| 191 | contents to be saved in the kernel. It provides documentation |
| 192 | of which kernel options are used in a running kernel or in an |
| 193 | on-disk kernel. This information can be extracted from the kernel |
| 194 | image file with the script scripts/extract-ikconfig and used as |
| 195 | input to rebuild the current kernel or to build another kernel. |
| 196 | It can also be extracted from a running kernel by reading |
| 197 | /proc/config.gz if enabled (below). |
| 198 | |
| 199 | config IKCONFIG_PROC |
| 200 | bool "Enable access to .config through /proc/config.gz" |
| 201 | depends on IKCONFIG && PROC_FS |
| 202 | ---help--- |
| 203 | This option enables access to the kernel configuration file |
| 204 | through /proc/config.gz. |
| 205 | |
| 206 | config CPUSETS |
| 207 | bool "Cpuset support" |
| 208 | depends on SMP |
| 209 | help |
Randy Dunlap | d9fd8a6 | 2005-07-27 11:45:11 -0700 | [diff] [blame] | 210 | This option will let you create and manage CPUSETs which |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 211 | allow dynamically partitioning a system into sets of CPUs and |
| 212 | Memory Nodes and assigning tasks to run only within those sets. |
| 213 | This is primarily useful on large SMP or NUMA systems. |
| 214 | |
| 215 | Say N if unsure. |
| 216 | |
Jens Axboe | b86ff981 | 2006-03-23 19:56:55 +0100 | [diff] [blame^] | 217 | config RELAY |
| 218 | bool "Kernel->user space relay support (formerly relayfs)" |
| 219 | help |
| 220 | This option enables support for relay interface support in |
| 221 | certain file systems (such as debugfs). |
| 222 | It is designed to provide an efficient mechanism for tools and |
| 223 | facilities to relay large amounts of data from kernel space to |
| 224 | user space. |
| 225 | |
| 226 | If unsure, say N. |
| 227 | |
Sam Ravnborg | dbec486 | 2005-08-10 20:44:50 +0200 | [diff] [blame] | 228 | source "usr/Kconfig" |
| 229 | |
Matt Mackall | e585e47 | 2006-01-08 01:05:24 -0800 | [diff] [blame] | 230 | config UID16 |
| 231 | bool "Enable 16-bit UID system calls" if EMBEDDED |
Adrian Bunk | 2308acc | 2006-01-09 20:51:26 -0800 | [diff] [blame] | 232 | depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION) |
Matt Mackall | e585e47 | 2006-01-08 01:05:24 -0800 | [diff] [blame] | 233 | default y |
| 234 | help |
| 235 | This enables the legacy 16-bit UID syscall wrappers. |
| 236 | |
Matt Mackall | 64ca900 | 2006-01-08 01:05:26 -0800 | [diff] [blame] | 237 | config VM86 |
| 238 | depends X86 |
| 239 | default y |
| 240 | bool "Enable VM86 support" if EMBEDDED |
| 241 | help |
| 242 | This option is required by programs like DOSEMU to run 16-bit legacy |
| 243 | code on X86 processors. It also may be needed by software like |
| 244 | XFree86 to initialize some video cards via BIOS. Disabling this |
| 245 | option saves about 6k. |
| 246 | |
Linus Torvalds | c45b4f1 | 2005-12-14 18:52:21 -0800 | [diff] [blame] | 247 | config CC_OPTIMIZE_FOR_SIZE |
| 248 | bool "Optimize for size (Look out for broken compilers!)" |
| 249 | default y |
| 250 | depends on ARM || H8300 || EXPERIMENTAL |
Linus Torvalds | c45b4f1 | 2005-12-14 18:52:21 -0800 | [diff] [blame] | 251 | help |
| 252 | Enabling this option will pass "-Os" instead of "-O2" to gcc |
| 253 | resulting in a smaller kernel. |
| 254 | |
| 255 | WARNING: some versions of gcc may generate incorrect code with this |
| 256 | option. If problems are observed, a gcc upgrade may be needed. |
| 257 | |
| 258 | If unsure, say N. |
| 259 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 260 | menuconfig EMBEDDED |
| 261 | bool "Configure standard kernel features (for small systems)" |
| 262 | help |
| 263 | This option allows certain base kernel options and settings |
| 264 | to be disabled or tweaked. This is for specialized |
| 265 | environments which can tolerate a "non-standard" kernel. |
| 266 | Only use this if you really know what you are doing. |
| 267 | |
| 268 | config KALLSYMS |
| 269 | bool "Load all symbols for debugging/kksymoops" if EMBEDDED |
| 270 | default y |
| 271 | help |
| 272 | Say Y here to let the kernel print out symbolic crash information and |
| 273 | symbolic stack backtraces. This increases the size of the kernel |
| 274 | somewhat, as all symbols have to be loaded into the kernel image. |
| 275 | |
| 276 | config KALLSYMS_ALL |
| 277 | bool "Include all symbols in kallsyms" |
| 278 | depends on DEBUG_KERNEL && KALLSYMS |
| 279 | help |
| 280 | Normally kallsyms only contains the symbols of functions, for nicer |
| 281 | OOPS messages. Some debuggers can use kallsyms for other |
Jesper Juhl | f9f97bc | 2005-07-20 05:43:05 +0200 | [diff] [blame] | 282 | symbols too: say Y here to include all symbols, if you need them |
| 283 | and you don't care about adding 300k to the size of your kernel. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 284 | |
| 285 | Say N. |
| 286 | |
| 287 | config KALLSYMS_EXTRA_PASS |
| 288 | bool "Do an extra kallsyms pass" |
| 289 | depends on KALLSYMS |
| 290 | help |
| 291 | If kallsyms is not working correctly, the build will fail with |
| 292 | inconsistent kallsyms data. If that occurs, log a bug report and |
| 293 | turn on KALLSYMS_EXTRA_PASS which should result in a stable build. |
| 294 | Always say N here unless you find a bug in kallsyms, which must be |
| 295 | reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while |
| 296 | you wait for kallsyms to be fixed. |
| 297 | |
Matt Mackall | d59745c | 2005-05-01 08:59:02 -0700 | [diff] [blame] | 298 | |
Greg Kroah-Hartman | 712f47c | 2005-11-16 11:27:07 -0800 | [diff] [blame] | 299 | config HOTPLUG |
| 300 | bool "Support for hot-pluggable devices" if EMBEDDED |
| 301 | default y |
| 302 | help |
| 303 | This option is provided for the case where no hotplug or uevent |
| 304 | capabilities is wanted by the kernel. You should only consider |
| 305 | disabling this option for embedded systems that do not use modules, a |
| 306 | dynamic /dev tree, or dynamic device discovery. Just say Y. |
| 307 | |
Matt Mackall | d59745c | 2005-05-01 08:59:02 -0700 | [diff] [blame] | 308 | config PRINTK |
| 309 | default y |
| 310 | bool "Enable support for printk" if EMBEDDED |
| 311 | help |
| 312 | This option enables normal printk support. Removing it |
| 313 | eliminates most of the message strings from the kernel image |
| 314 | and makes the kernel more or less silent. As this makes it |
| 315 | very difficult to diagnose system problems, saying N here is |
| 316 | strongly discouraged. |
| 317 | |
Matt Mackall | c8538a7 | 2005-05-01 08:59:01 -0700 | [diff] [blame] | 318 | config BUG |
| 319 | bool "BUG() support" if EMBEDDED |
| 320 | default y |
| 321 | help |
| 322 | Disabling this option eliminates support for BUG and WARN, reducing |
| 323 | the size of your kernel image and potentially quietly ignoring |
| 324 | numerous fatal conditions. You should only consider disabling this |
| 325 | option for embedded systems with no facilities for reporting errors. |
| 326 | Just say Y. |
| 327 | |
Matt Mackall | 708e9a7 | 2006-01-08 01:05:25 -0800 | [diff] [blame] | 328 | config ELF_CORE |
| 329 | default y |
| 330 | bool "Enable ELF core dumps" if EMBEDDED |
| 331 | help |
| 332 | Enable support for generating core dumps. Disabling saves about 4k. |
| 333 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 334 | config BASE_FULL |
| 335 | default y |
| 336 | bool "Enable full-sized data structures for core" if EMBEDDED |
| 337 | help |
| 338 | Disabling this option reduces the size of miscellaneous core |
| 339 | kernel data structures. This saves memory on small machines, |
| 340 | but may reduce performance. |
| 341 | |
| 342 | config FUTEX |
| 343 | bool "Enable futex support" if EMBEDDED |
| 344 | default y |
| 345 | help |
| 346 | Disabling this option will cause the kernel to be built without |
| 347 | support for "fast userspace mutexes". The resulting kernel may not |
| 348 | run glibc-based applications correctly. |
| 349 | |
| 350 | config EPOLL |
| 351 | bool "Enable eventpoll support" if EMBEDDED |
| 352 | default y |
| 353 | help |
| 354 | Disabling this option will cause the kernel to be built without |
| 355 | support for epoll family of system calls. |
| 356 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 357 | config SHMEM |
| 358 | bool "Use full shmem filesystem" if EMBEDDED |
| 359 | default y |
| 360 | depends on MMU |
| 361 | help |
| 362 | The shmem is an internal filesystem used to manage shared memory. |
| 363 | It is backed by swap and manages resource limits. It is also exported |
| 364 | to userspace as tmpfs if TMPFS is enabled. Disabling this |
| 365 | option replaces shmem and tmpfs with the much simpler ramfs code, |
| 366 | which may be appropriate on small systems without swap. |
| 367 | |
| 368 | config CC_ALIGN_FUNCTIONS |
| 369 | int "Function alignment" if EMBEDDED |
| 370 | default 0 |
| 371 | help |
| 372 | Align the start of functions to the next power-of-two greater than n, |
| 373 | skipping up to n bytes. For instance, 32 aligns functions |
| 374 | to the next 32-byte boundary, but 24 would align to the next |
| 375 | 32-byte boundary only if this can be done by skipping 23 bytes or less. |
| 376 | Zero means use compiler's default. |
| 377 | |
| 378 | config CC_ALIGN_LABELS |
| 379 | int "Label alignment" if EMBEDDED |
| 380 | default 0 |
| 381 | help |
| 382 | Align all branch targets to a power-of-two boundary, skipping |
| 383 | up to n bytes like ALIGN_FUNCTIONS. This option can easily |
| 384 | make code slower, because it must insert dummy operations for |
| 385 | when the branch target is reached in the usual flow of the code. |
| 386 | Zero means use compiler's default. |
| 387 | |
| 388 | config CC_ALIGN_LOOPS |
| 389 | int "Loop alignment" if EMBEDDED |
| 390 | default 0 |
| 391 | help |
| 392 | Align loops to a power-of-two boundary, skipping up to n bytes. |
| 393 | Zero means use compiler's default. |
| 394 | |
| 395 | config CC_ALIGN_JUMPS |
| 396 | int "Jump alignment" if EMBEDDED |
| 397 | default 0 |
| 398 | help |
| 399 | Align branch targets to a power-of-two boundary, for branch |
| 400 | targets where the targets can only be reached by jumping, |
| 401 | skipping up to n bytes like ALIGN_FUNCTIONS. In this case, |
| 402 | no dummy operations need be executed. |
| 403 | Zero means use compiler's default. |
| 404 | |
Matt Mackall | 10cef60 | 2006-01-08 01:01:45 -0800 | [diff] [blame] | 405 | config SLAB |
| 406 | default y |
| 407 | bool "Use full SLAB allocator" if EMBEDDED |
| 408 | help |
| 409 | Disabling this replaces the advanced SLAB allocator and |
| 410 | kmalloc support with the drastically simpler SLOB allocator. |
| 411 | SLOB is more space efficient but does not scale well and is |
| 412 | more susceptible to fragmentation. |
| 413 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 414 | endmenu # General setup |
| 415 | |
| 416 | config TINY_SHMEM |
| 417 | default !SHMEM |
| 418 | bool |
| 419 | |
| 420 | config BASE_SMALL |
| 421 | int |
| 422 | default 0 if BASE_FULL |
| 423 | default 1 if !BASE_FULL |
| 424 | |
Matt Mackall | 10cef60 | 2006-01-08 01:01:45 -0800 | [diff] [blame] | 425 | config SLOB |
| 426 | default !SLAB |
| 427 | bool |
| 428 | |
Adrian Bunk | fd27919 | 2006-01-16 22:13:59 -0800 | [diff] [blame] | 429 | config OBSOLETE_INTERMODULE |
| 430 | tristate |
| 431 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 432 | menu "Loadable module support" |
| 433 | |
| 434 | config MODULES |
| 435 | bool "Enable loadable module support" |
| 436 | help |
| 437 | Kernel modules are small pieces of compiled code which can |
| 438 | be inserted in the running kernel, rather than being |
| 439 | permanently built into the kernel. You use the "modprobe" |
| 440 | tool to add (and sometimes remove) them. If you say Y here, |
| 441 | many parts of the kernel can be built as modules (by |
| 442 | answering M instead of Y where indicated): this is most |
| 443 | useful for infrequently used options which are not required |
| 444 | for booting. For more information, see the man pages for |
| 445 | modprobe, lsmod, modinfo, insmod and rmmod. |
| 446 | |
| 447 | If you say Y here, you will need to run "make |
| 448 | modules_install" to put the modules under /lib/modules/ |
| 449 | where modprobe can find them (you may need to be root to do |
| 450 | this). |
| 451 | |
| 452 | If unsure, say Y. |
| 453 | |
| 454 | config MODULE_UNLOAD |
| 455 | bool "Module unloading" |
| 456 | depends on MODULES |
| 457 | help |
| 458 | Without this option you will not be able to unload any |
| 459 | modules (note that some modules may not be unloadable |
| 460 | anyway), which makes your kernel slightly smaller and |
| 461 | simpler. If unsure, say Y. |
| 462 | |
| 463 | config MODULE_FORCE_UNLOAD |
| 464 | bool "Forced module unloading" |
| 465 | depends on MODULE_UNLOAD && EXPERIMENTAL |
| 466 | help |
| 467 | This option allows you to force a module to unload, even if the |
| 468 | kernel believes it is unsafe: the kernel will remove the module |
| 469 | without waiting for anyone to stop using it (using the -f option to |
| 470 | rmmod). This is mainly for kernel developers and desperate users. |
| 471 | If unsure, say N. |
| 472 | |
| 473 | config OBSOLETE_MODPARM |
| 474 | bool |
| 475 | default y |
| 476 | depends on MODULES |
| 477 | help |
| 478 | You need this option to use module parameters on modules which |
| 479 | have not been converted to the new module parameter system yet. |
| 480 | If unsure, say Y. |
| 481 | |
| 482 | config MODVERSIONS |
Sam Ravnborg | 0d54164 | 2005-12-26 23:04:02 +0100 | [diff] [blame] | 483 | bool "Module versioning support" |
| 484 | depends on MODULES |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 485 | help |
| 486 | Usually, you have to use modules compiled with your kernel. |
| 487 | Saying Y here makes it sometimes possible to use modules |
| 488 | compiled for different kernels, by adding enough information |
| 489 | to the modules to (hopefully) spot any changes which would |
| 490 | make them incompatible with the kernel you are running. If |
| 491 | unsure, say N. |
| 492 | |
| 493 | config MODULE_SRCVERSION_ALL |
| 494 | bool "Source checksum for all modules" |
| 495 | depends on MODULES |
| 496 | help |
| 497 | Modules which contain a MODULE_VERSION get an extra "srcversion" |
| 498 | field inserted into their modinfo section, which contains a |
| 499 | sum of the source files which made it. This helps maintainers |
| 500 | see exactly which source was used to build a module (since |
| 501 | others sometimes change the module source without updating |
| 502 | the version). With this option, such a "srcversion" field |
| 503 | will be created for all modules. If unsure, say N. |
| 504 | |
| 505 | config KMOD |
| 506 | bool "Automatic kernel module loading" |
| 507 | depends on MODULES |
| 508 | help |
| 509 | Normally when you have selected some parts of the kernel to |
| 510 | be created as kernel modules, you must load them (using the |
| 511 | "modprobe" command) before you can use them. If you say Y |
| 512 | here, some parts of the kernel will be able to load modules |
| 513 | automatically: when a part of the kernel needs a module, it |
| 514 | runs modprobe with the appropriate arguments, thereby |
| 515 | loading the module if it is available. If unsure, say Y. |
| 516 | |
| 517 | config STOP_MACHINE |
| 518 | bool |
| 519 | default y |
| 520 | depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU |
| 521 | help |
| 522 | Need stop_machine() primitive. |
| 523 | endmenu |
Jens Axboe | 3a65dfe | 2005-11-04 08:43:35 +0100 | [diff] [blame] | 524 | |
| 525 | menu "Block layer" |
| 526 | source "block/Kconfig" |
| 527 | endmenu |