| <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> |
| <html> |
| <!-- This file documents the GNU Assembler "as". |
| |
| Copyright (C) 1991-2013 Free Software Foundation, Inc. |
| |
| Permission is granted to copy, distribute and/or modify this document |
| under the terms of the GNU Free Documentation License, Version 1.3 |
| or any later version published by the Free Software Foundation; |
| with no Invariant Sections, with no Front-Cover Texts, and with no |
| Back-Cover Texts. A copy of the license is included in the |
| section entitled "GNU Free Documentation License". |
| --> |
| <!-- Created by GNU Texinfo 5.2, http://www.gnu.org/software/texinfo/ --> |
| <head> |
| <title>Using as: M68HC11-Syntax</title> |
| |
| <meta name="description" content="Using as: M68HC11-Syntax"> |
| <meta name="keywords" content="Using as: M68HC11-Syntax"> |
| <meta name="resource-type" content="document"> |
| <meta name="distribution" content="global"> |
| <meta name="Generator" content="makeinfo"> |
| <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> |
| <link href="index.html#Top" rel="start" title="Top"> |
| <link href="AS-Index.html#AS-Index" rel="index" title="AS Index"> |
| <link href="index.html#SEC_Contents" rel="contents" title="Table of Contents"> |
| <link href="M68HC11_002dDependent.html#M68HC11_002dDependent" rel="up" title="M68HC11-Dependent"> |
| <link href="M68HC11_002dModifiers.html#M68HC11_002dModifiers" rel="next" title="M68HC11-Modifiers"> |
| <link href="M68HC11_002dOpts.html#M68HC11_002dOpts" rel="prev" title="M68HC11-Opts"> |
| <style type="text/css"> |
| <!-- |
| a.summary-letter {text-decoration: none} |
| blockquote.smallquotation {font-size: smaller} |
| div.display {margin-left: 3.2em} |
| div.example {margin-left: 3.2em} |
| div.indentedblock {margin-left: 3.2em} |
| div.lisp {margin-left: 3.2em} |
| div.smalldisplay {margin-left: 3.2em} |
| div.smallexample {margin-left: 3.2em} |
| div.smallindentedblock {margin-left: 3.2em; font-size: smaller} |
| div.smalllisp {margin-left: 3.2em} |
| kbd {font-style:oblique} |
| pre.display {font-family: inherit} |
| pre.format {font-family: inherit} |
| pre.menu-comment {font-family: serif} |
| pre.menu-preformatted {font-family: serif} |
| pre.smalldisplay {font-family: inherit; font-size: smaller} |
| pre.smallexample {font-size: smaller} |
| pre.smallformat {font-family: inherit; font-size: smaller} |
| pre.smalllisp {font-size: smaller} |
| span.nocodebreak {white-space:nowrap} |
| span.nolinebreak {white-space:nowrap} |
| span.roman {font-family:serif; font-weight:normal} |
| span.sansserif {font-family:sans-serif; font-weight:normal} |
| ul.no-bullet {list-style: none} |
| --> |
| </style> |
| |
| |
| </head> |
| |
| <body lang="en" bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#800080" alink="#FF0000"> |
| <a name="M68HC11_002dSyntax"></a> |
| <div class="header"> |
| <p> |
| Next: <a href="M68HC11_002dModifiers.html#M68HC11_002dModifiers" accesskey="n" rel="next">M68HC11-Modifiers</a>, Previous: <a href="M68HC11_002dOpts.html#M68HC11_002dOpts" accesskey="p" rel="prev">M68HC11-Opts</a>, Up: <a href="M68HC11_002dDependent.html#M68HC11_002dDependent" accesskey="u" rel="up">M68HC11-Dependent</a> [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="AS-Index.html#AS-Index" title="Index" rel="index">Index</a>]</p> |
| </div> |
| <hr> |
| <a name="Syntax-17"></a> |
| <h4 class="subsection">9.24.2 Syntax</h4> |
| |
| <a name="index-M68HC11-syntax"></a> |
| <a name="index-syntax_002c-M68HC11"></a> |
| |
| <p>In the M68HC11 syntax, the instruction name comes first and it may |
| be followed by one or several operands (up to three). Operands are |
| separated by comma (‘<samp>,</samp>’). In the normal mode, |
| <code>as</code> will complain if too many operands are specified for |
| a given instruction. In the MRI mode (turned on with ‘<samp>-M</samp>’ option), |
| it will treat them as comments. Example: |
| </p> |
| <div class="smallexample"> |
| <pre class="smallexample">inx |
| lda #23 |
| bset 2,x #4 |
| brclr *bot #8 foo |
| </pre></div> |
| |
| <a name="index-line-comment-character_002c-M68HC11"></a> |
| <a name="index-M68HC11-line-comment-character"></a> |
| <p>The presence of a ‘<samp>;</samp>’ character or a ‘<samp>!</samp>’ character anywhere |
| on a line indicates the start of a comment that extends to the end of |
| that line. |
| </p> |
| <p>A ‘<samp>*</samp>’ or a ‘<samp>#</samp>’ character at the start of a line also |
| introduces a line comment, but these characters do not work elsewhere |
| on the line. If the first character of the line is a ‘<samp>#</samp>’ then as |
| well as starting a comment, the line could also be logical line number |
| directive (see <a href="Comments.html#Comments">Comments</a>) or a preprocessor control command |
| (see <a href="Preprocessing.html#Preprocessing">Preprocessing</a>). |
| </p> |
| <a name="index-line-separator_002c-M68HC11"></a> |
| <a name="index-statement-separator_002c-M68HC11"></a> |
| <a name="index-M68HC11-line-separator"></a> |
| <p>The M68HC11 assembler does not currently support a line separator |
| character. |
| </p> |
| <a name="index-M68HC11-addressing-modes"></a> |
| <a name="index-addressing-modes_002c-M68HC11"></a> |
| <p>The following addressing modes are understood for 68HC11 and 68HC12: |
| </p><dl compact="compact"> |
| <dt><em>Immediate</em></dt> |
| <dd><p>‘<samp>#<var>number</var></samp>’ |
| </p> |
| </dd> |
| <dt><em>Address Register</em></dt> |
| <dd><p>‘<samp><var>number</var>,X</samp>’, ‘<samp><var>number</var>,Y</samp>’ |
| </p> |
| <p>The <var>number</var> may be omitted in which case 0 is assumed. |
| </p> |
| </dd> |
| <dt><em>Direct Addressing mode</em></dt> |
| <dd><p>‘<samp>*<var>symbol</var></samp>’, or ‘<samp>*<var>digits</var></samp>’ |
| </p> |
| </dd> |
| <dt><em>Absolute</em></dt> |
| <dd><p>‘<samp><var>symbol</var></samp>’, or ‘<samp><var>digits</var></samp>’ |
| </p></dd> |
| </dl> |
| |
| <p>The M68HC12 has other more complex addressing modes. All of them |
| are supported and they are represented below: |
| </p> |
| <dl compact="compact"> |
| <dt><em>Constant Offset Indexed Addressing Mode</em></dt> |
| <dd><p>‘<samp><var>number</var>,<var>reg</var></samp>’ |
| </p> |
| <p>The <var>number</var> may be omitted in which case 0 is assumed. |
| The register can be either ‘<samp>X</samp>’, ‘<samp>Y</samp>’, ‘<samp>SP</samp>’ or |
| ‘<samp>PC</samp>’. The assembler will use the smaller post-byte definition |
| according to the constant value (5-bit constant offset, 9-bit constant |
| offset or 16-bit constant offset). If the constant is not known by |
| the assembler it will use the 16-bit constant offset post-byte and the value |
| will be resolved at link time. |
| </p> |
| </dd> |
| <dt><em>Offset Indexed Indirect</em></dt> |
| <dd><p>‘<samp>[<var>number</var>,<var>reg</var>]</samp>’ |
| </p> |
| <p>The register can be either ‘<samp>X</samp>’, ‘<samp>Y</samp>’, ‘<samp>SP</samp>’ or ‘<samp>PC</samp>’. |
| </p> |
| </dd> |
| <dt><em>Auto Pre-Increment/Pre-Decrement/Post-Increment/Post-Decrement</em></dt> |
| <dd><p>‘<samp><var>number</var>,-<var>reg</var></samp>’ |
| ‘<samp><var>number</var>,+<var>reg</var></samp>’ |
| ‘<samp><var>number</var>,<var>reg</var>-</samp>’ |
| ‘<samp><var>number</var>,<var>reg</var>+</samp>’ |
| </p> |
| <p>The number must be in the range ‘<samp>-8</samp>’..‘<samp>+8</samp>’ and must not be 0. |
| The register can be either ‘<samp>X</samp>’, ‘<samp>Y</samp>’, ‘<samp>SP</samp>’ or ‘<samp>PC</samp>’. |
| </p> |
| </dd> |
| <dt><em>Accumulator Offset</em></dt> |
| <dd><p>‘<samp><var>acc</var>,<var>reg</var></samp>’ |
| </p> |
| <p>The accumulator register can be either ‘<samp>A</samp>’, ‘<samp>B</samp>’ or ‘<samp>D</samp>’. |
| The register can be either ‘<samp>X</samp>’, ‘<samp>Y</samp>’, ‘<samp>SP</samp>’ or ‘<samp>PC</samp>’. |
| </p> |
| </dd> |
| <dt><em>Accumulator D offset indexed-indirect</em></dt> |
| <dd><p>‘<samp>[D,<var>reg</var>]</samp>’ |
| </p> |
| <p>The register can be either ‘<samp>X</samp>’, ‘<samp>Y</samp>’, ‘<samp>SP</samp>’ or ‘<samp>PC</samp>’. |
| </p> |
| </dd> |
| </dl> |
| |
| <p>For example: |
| </p> |
| <div class="smallexample"> |
| <pre class="smallexample">ldab 1024,sp |
| ldd [10,x] |
| orab 3,+x |
| stab -2,y- |
| ldx a,pc |
| sty [d,sp] |
| </pre></div> |
| |
| |
| <hr> |
| <div class="header"> |
| <p> |
| Next: <a href="M68HC11_002dModifiers.html#M68HC11_002dModifiers" accesskey="n" rel="next">M68HC11-Modifiers</a>, Previous: <a href="M68HC11_002dOpts.html#M68HC11_002dOpts" accesskey="p" rel="prev">M68HC11-Opts</a>, Up: <a href="M68HC11_002dDependent.html#M68HC11_002dDependent" accesskey="u" rel="up">M68HC11-Dependent</a> [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="AS-Index.html#AS-Index" title="Index" rel="index">Index</a>]</p> |
| </div> |
| |
| |
| |
| </body> |
| </html> |