plat/arm/board/tc/include/platform_def.h - trusted-firmware-a - Git at Google

 /*
  * Copyright (c) 2020-2021, Arm Limited. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #ifndef PLATFORM_DEF_H
 #define PLATFORM_DEF_H

 #include <lib/utils_def.h>
 #include <lib/xlat_tables/xlat_tables_defs.h>
 #include <plat/arm/board/common/board_css_def.h>
 #include <plat/arm/board/common/v2m_def.h>
 #include <plat/arm/common/arm_def.h>
 #include <plat/arm/common/arm_spm_def.h>
 #include <plat/arm/css/common/css_def.h>
 #include <plat/arm/soc/common/soc_css_def.h>
 #include <plat/common/common_def.h>

 #define PLATFORM_CORE_COUNT		8

 #define PLAT_ARM_TRUSTED_SRAM_SIZE	0x00080000	/* 512 KB */

 /*
  * The top 16MB of ARM_DRAM1 is configured as secure access only using the TZC,
  * its base is ARM_AP_TZC_DRAM1_BASE.
  *
  * Reserve 32MB below ARM_AP_TZC_DRAM1_BASE for:
  *   - BL32_BASE when SPD_spmd is enabled
  *   - Region to load Trusted OS
  */
 #define TC_TZC_DRAM1_BASE		(ARM_AP_TZC_DRAM1_BASE -	\
 					 TC_TZC_DRAM1_SIZE)
 #define TC_TZC_DRAM1_SIZE		UL(0x02000000)	/* 32 MB */
 #define TC_TZC_DRAM1_END		(TC_TZC_DRAM1_BASE +		\
 					 TC_TZC_DRAM1_SIZE - 1)

 #define TC_NS_DRAM1_BASE		ARM_DRAM1_BASE
 #define TC_NS_DRAM1_SIZE		(ARM_DRAM1_SIZE -		\
 					 ARM_TZC_DRAM1_SIZE -		\
 					 TC_TZC_DRAM1_SIZE)
 #define TC_NS_DRAM1_END		(TC_NS_DRAM1_BASE +		\
 					 TC_NS_DRAM1_SIZE - 1)

 /*
  * Mappings for TC DRAM1 (non-secure) and TC TZC DRAM1 (secure)
  */
 #define TC_MAP_NS_DRAM1		MAP_REGION_FLAT(		\
 						TC_NS_DRAM1_BASE,	\
 						TC_NS_DRAM1_SIZE,	\
 						MT_MEMORY | MT_RW | MT_NS)


 #define TC_MAP_TZC_DRAM1		MAP_REGION_FLAT(		\
 						TC_TZC_DRAM1_BASE,	\
 						TC_TZC_DRAM1_SIZE,	\
 						MT_MEMORY | MT_RW | MT_SECURE)

 #define PLAT_HW_CONFIG_DTB_BASE	ULL(0x83000000)
 #define PLAT_HW_CONFIG_DTB_SIZE	ULL(0x8000)

 #define PLAT_DTB_DRAM_NS MAP_REGION_FLAT(	\
 					PLAT_HW_CONFIG_DTB_BASE,	\
 					PLAT_HW_CONFIG_DTB_SIZE,	\
 					MT_MEMORY | MT_RO | MT_NS)
 /*
  * Max size of SPMC is 2MB for tc. With SPMD enabled this value corresponds to
  * max size of BL32 image.
  */
 #if defined(SPD_spmd)
 #define PLAT_ARM_SPMC_BASE		TC_TZC_DRAM1_BASE
 #define PLAT_ARM_SPMC_SIZE		UL(0x200000)  /* 2 MB */
 #endif

 /*
  * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
  * plat_arm_mmap array defined for each BL stage.
  */
 #if defined(IMAGE_BL31)
 # if SPM_MM
 #  define PLAT_ARM_MMAP_ENTRIES		9
 #  define MAX_XLAT_TABLES		7
 #  define PLAT_SP_IMAGE_MMAP_REGIONS	7
 #  define PLAT_SP_IMAGE_MAX_XLAT_TABLES	10
 # else
 #  define PLAT_ARM_MMAP_ENTRIES		8
 #  define MAX_XLAT_TABLES		8
 # endif
 #elif defined(IMAGE_BL32)
 # define PLAT_ARM_MMAP_ENTRIES		8
 # define MAX_XLAT_TABLES		5
 #elif !USE_ROMLIB
 # define PLAT_ARM_MMAP_ENTRIES		11
 # define MAX_XLAT_TABLES		7
 #else
 # define PLAT_ARM_MMAP_ENTRIES		12
 # define MAX_XLAT_TABLES		6
 #endif

 /*
  * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
  * plus a little space for growth.
  */
 #define PLAT_ARM_MAX_BL1_RW_SIZE	0xC000

 /*
  * PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
  */

 #if USE_ROMLIB
 #define PLAT_ARM_MAX_ROMLIB_RW_SIZE	0x1000
 #define PLAT_ARM_MAX_ROMLIB_RO_SIZE	0xe000
 #else
 #define PLAT_ARM_MAX_ROMLIB_RW_SIZE	0
 #define PLAT_ARM_MAX_ROMLIB_RO_SIZE	0
 #endif

 /*
  * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
  * little space for growth.
  */
 #if TRUSTED_BOARD_BOOT
 # define PLAT_ARM_MAX_BL2_SIZE		0x20000
 #else
 # define PLAT_ARM_MAX_BL2_SIZE		0x14000
 #endif

 /*
  * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
  * calculated using the current BL31 PROGBITS debug size plus the sizes of
  * BL2 and BL1-RW
  */
 #define PLAT_ARM_MAX_BL31_SIZE		0x3F000

 /*
  * Size of cacheable stacks
  */
 #if defined(IMAGE_BL1)
 # if TRUSTED_BOARD_BOOT
 #  define PLATFORM_STACK_SIZE		0x1000
 # else
 #  define PLATFORM_STACK_SIZE		0x440
 # endif
 #elif defined(IMAGE_BL2)
 # if TRUSTED_BOARD_BOOT
 #  define PLATFORM_STACK_SIZE		0x1000
 # else
 #  define PLATFORM_STACK_SIZE		0x400
 # endif
 #elif defined(IMAGE_BL2U)
 # define PLATFORM_STACK_SIZE		0x400
 #elif defined(IMAGE_BL31)
 # if SPM_MM
 #  define PLATFORM_STACK_SIZE		0x500
 # else
 #  define PLATFORM_STACK_SIZE		0x400
 # endif
 #elif defined(IMAGE_BL32)
 # define PLATFORM_STACK_SIZE		0x440
 #endif


 #define TC_DEVICE_BASE			0x21000000
 #define TC_DEVICE_SIZE			0x5f000000

 // TC_MAP_DEVICE covers different peripherals
 // available to the platform
 #define TC_MAP_DEVICE	MAP_REGION_FLAT(		\
 					TC_DEVICE_BASE,	\
 					TC_DEVICE_SIZE,	\
 					MT_DEVICE | MT_RW | MT_SECURE)


 #define TC_FLASH0_RO	MAP_REGION_FLAT(V2M_FLASH0_BASE,\
 						V2M_FLASH0_SIZE,	\
 						MT_DEVICE | MT_RO | MT_SECURE)

 #define PLAT_ARM_NSTIMER_FRAME_ID	0

 #define PLAT_ARM_TRUSTED_ROM_BASE	0x0
 #define PLAT_ARM_TRUSTED_ROM_SIZE	0x00080000	/* 512KB */

 #define PLAT_ARM_NSRAM_BASE		0x06000000
 #define PLAT_ARM_NSRAM_SIZE		0x00080000	/* 512KB */

 #define PLAT_ARM_DRAM2_BASE		ULL(0x8080000000)
 #define PLAT_ARM_DRAM2_SIZE		ULL(0x180000000)

 #define PLAT_ARM_G1S_IRQ_PROPS(grp)	CSS_G1S_IRQ_PROPS(grp)
 #define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)

 #define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SP_IMAGE_NS_BUF_BASE +	\
 					 PLAT_SP_IMAGE_NS_BUF_SIZE)

 /*******************************************************************************
  * Memprotect definitions
  ******************************************************************************/
 /* PSCI memory protect definitions:
  * This variable is stored in a non-secure flash because some ARM reference
  * platforms do not have secure NVRAM. Real systems that provided MEM_PROTECT
  * support must use a secure NVRAM to store the PSCI MEM_PROTECT definitions.
  */
 #define PLAT_ARM_MEM_PROT_ADDR		(V2M_FLASH0_BASE + \
 					 V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)

 /*Secure Watchdog Constants */
 #define SBSA_SECURE_WDOG_BASE		UL(0x2A480000)
 #define SBSA_SECURE_WDOG_TIMEOUT	UL(100)

 #define PLAT_ARM_SCMI_CHANNEL_COUNT	1

 #define PLAT_ARM_CLUSTER_COUNT		U(1)
 #define PLAT_MAX_CPUS_PER_CLUSTER	U(8)
 #define PLAT_MAX_PE_PER_CPU		U(1)

 #define PLAT_CSS_MHU_BASE		UL(0x45400000)
 #define PLAT_MHUV2_BASE			PLAT_CSS_MHU_BASE

 #define CSS_SYSTEM_PWR_DMN_LVL		ARM_PWR_LVL2
 #define PLAT_MAX_PWR_LVL		ARM_PWR_LVL1

 /*
  * Physical and virtual address space limits for MMU in AARCH64
  */
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)

 /* GIC related constants */
 #define PLAT_ARM_GICD_BASE		UL(0x30000000)
 #define PLAT_ARM_GICC_BASE		UL(0x2C000000)
 #define PLAT_ARM_GICR_BASE		UL(0x30080000)

 /*
  * PLAT_CSS_MAX_SCP_BL2_SIZE is calculated using the current
  * SCP_BL2 size plus a little space for growth.
  */
 #define PLAT_CSS_MAX_SCP_BL2_SIZE	0x20000

 /*
  * PLAT_CSS_MAX_SCP_BL2U_SIZE is calculated using the current
  * SCP_BL2U size plus a little space for growth.
  */
 #define PLAT_CSS_MAX_SCP_BL2U_SIZE	0x20000

 /* TZC Related Constants */
 #define PLAT_ARM_TZC_BASE		UL(0x25000000)
 #define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)

 #define TZC400_OFFSET			UL(0x1000000)
 #define TZC400_COUNT			4

 #define TZC400_BASE(n)			(PLAT_ARM_TZC_BASE + \
 					 (n * TZC400_OFFSET))

 #define TZC_NSAID_DEFAULT		U(0)

 #define PLAT_ARM_TZC_NS_DEV_ACCESS	\
 		(TZC_REGION_ACCESS_RDWR(TZC_NSAID_DEFAULT))

 /*
  * The first region below, TC_TZC_DRAM1_BASE (0xfd000000) to
  * ARM_SCP_TZC_DRAM1_END (0xffffffff) will mark the last 48 MB of DRAM as
  * secure. The second region gives non secure access to rest of DRAM.
  */
 #define TC_TZC_REGIONS_DEF						\
 	{TC_TZC_DRAM1_BASE, ARM_SCP_TZC_DRAM1_END,			\
 		TZC_REGION_S_RDWR, PLAT_ARM_TZC_NS_DEV_ACCESS},		\
 	{TC_NS_DRAM1_BASE, TC_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \
 		PLAT_ARM_TZC_NS_DEV_ACCESS}

 /* virtual address used by dynamic mem_protect for chunk_base */
 #define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)

 #endif /* PLATFORM_DEF_H */
	/*
	* Copyright (c) 2020-2021, Arm Limited. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#ifndef PLATFORM_DEF_H
	#define PLATFORM_DEF_H

	#include <lib/utils_def.h>
	#include <lib/xlat_tables/xlat_tables_defs.h>
	#include <plat/arm/board/common/board_css_def.h>
	#include <plat/arm/board/common/v2m_def.h>
	#include <plat/arm/common/arm_def.h>
	#include <plat/arm/common/arm_spm_def.h>
	#include <plat/arm/css/common/css_def.h>
	#include <plat/arm/soc/common/soc_css_def.h>
	#include <plat/common/common_def.h>

	#define PLATFORM_CORE_COUNT 8

	#define PLAT_ARM_TRUSTED_SRAM_SIZE 0x00080000 /* 512 KB */

	/*
	* The top 16MB of ARM_DRAM1 is configured as secure access only using the TZC,
	* its base is ARM_AP_TZC_DRAM1_BASE.
	*
	* Reserve 32MB below ARM_AP_TZC_DRAM1_BASE for:
	* - BL32_BASE when SPD_spmd is enabled
	* - Region to load Trusted OS
	*/
	#define TC_TZC_DRAM1_BASE (ARM_AP_TZC_DRAM1_BASE - \
	TC_TZC_DRAM1_SIZE)
	#define TC_TZC_DRAM1_SIZE UL(0x02000000) /* 32 MB */
	#define TC_TZC_DRAM1_END (TC_TZC_DRAM1_BASE + \
	TC_TZC_DRAM1_SIZE - 1)

	#define TC_NS_DRAM1_BASE ARM_DRAM1_BASE
	#define TC_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
	ARM_TZC_DRAM1_SIZE - \
	TC_TZC_DRAM1_SIZE)
	#define TC_NS_DRAM1_END (TC_NS_DRAM1_BASE + \
	TC_NS_DRAM1_SIZE - 1)

	/*
	* Mappings for TC DRAM1 (non-secure) and TC TZC DRAM1 (secure)
	*/
	#define TC_MAP_NS_DRAM1 MAP_REGION_FLAT( \
	TC_NS_DRAM1_BASE, \
	TC_NS_DRAM1_SIZE, \
	MT_MEMORY \| MT_RW \| MT_NS)


	#define TC_MAP_TZC_DRAM1 MAP_REGION_FLAT( \
	TC_TZC_DRAM1_BASE, \
	TC_TZC_DRAM1_SIZE, \
	MT_MEMORY \| MT_RW \| MT_SECURE)

	#define PLAT_HW_CONFIG_DTB_BASE ULL(0x83000000)
	#define PLAT_HW_CONFIG_DTB_SIZE ULL(0x8000)

	#define PLAT_DTB_DRAM_NS MAP_REGION_FLAT( \
	PLAT_HW_CONFIG_DTB_BASE, \
	PLAT_HW_CONFIG_DTB_SIZE, \
	MT_MEMORY \| MT_RO \| MT_NS)
	/*
	* Max size of SPMC is 2MB for tc. With SPMD enabled this value corresponds to
	* max size of BL32 image.
	*/
	#if defined(SPD_spmd)
	#define PLAT_ARM_SPMC_BASE TC_TZC_DRAM1_BASE
	#define PLAT_ARM_SPMC_SIZE UL(0x200000) /* 2 MB */
	#endif

	/*
	* PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
	* plat_arm_mmap array defined for each BL stage.
	*/
	#if defined(IMAGE_BL31)
	# if SPM_MM
	# define PLAT_ARM_MMAP_ENTRIES 9
	# define MAX_XLAT_TABLES 7
	# define PLAT_SP_IMAGE_MMAP_REGIONS 7
	# define PLAT_SP_IMAGE_MAX_XLAT_TABLES 10
	# else
	# define PLAT_ARM_MMAP_ENTRIES 8
	# define MAX_XLAT_TABLES 8
	# endif
	#elif defined(IMAGE_BL32)
	# define PLAT_ARM_MMAP_ENTRIES 8
	# define MAX_XLAT_TABLES 5
	#elif !USE_ROMLIB
	# define PLAT_ARM_MMAP_ENTRIES 11
	# define MAX_XLAT_TABLES 7
	#else
	# define PLAT_ARM_MMAP_ENTRIES 12
	# define MAX_XLAT_TABLES 6
	#endif

	/*
	* PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
	* plus a little space for growth.
	*/
	#define PLAT_ARM_MAX_BL1_RW_SIZE 0xC000

	/*
	* PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
	*/

	#if USE_ROMLIB
	#define PLAT_ARM_MAX_ROMLIB_RW_SIZE 0x1000
	#define PLAT_ARM_MAX_ROMLIB_RO_SIZE 0xe000
	#else
	#define PLAT_ARM_MAX_ROMLIB_RW_SIZE 0
	#define PLAT_ARM_MAX_ROMLIB_RO_SIZE 0
	#endif

	/*
	* PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
	* little space for growth.
	*/
	#if TRUSTED_BOARD_BOOT
	# define PLAT_ARM_MAX_BL2_SIZE 0x20000
	#else
	# define PLAT_ARM_MAX_BL2_SIZE 0x14000
	#endif

	/*
	* Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
	* calculated using the current BL31 PROGBITS debug size plus the sizes of
	* BL2 and BL1-RW
	*/
	#define PLAT_ARM_MAX_BL31_SIZE 0x3F000

	/*
	* Size of cacheable stacks
	*/
	#if defined(IMAGE_BL1)
	# if TRUSTED_BOARD_BOOT
	# define PLATFORM_STACK_SIZE 0x1000
	# else
	# define PLATFORM_STACK_SIZE 0x440
	# endif
	#elif defined(IMAGE_BL2)
	# if TRUSTED_BOARD_BOOT
	# define PLATFORM_STACK_SIZE 0x1000
	# else
	# define PLATFORM_STACK_SIZE 0x400
	# endif
	#elif defined(IMAGE_BL2U)
	# define PLATFORM_STACK_SIZE 0x400
	#elif defined(IMAGE_BL31)
	# if SPM_MM
	# define PLATFORM_STACK_SIZE 0x500
	# else
	# define PLATFORM_STACK_SIZE 0x400
	# endif
	#elif defined(IMAGE_BL32)
	# define PLATFORM_STACK_SIZE 0x440
	#endif


	#define TC_DEVICE_BASE 0x21000000
	#define TC_DEVICE_SIZE 0x5f000000

	// TC_MAP_DEVICE covers different peripherals
	// available to the platform
	#define TC_MAP_DEVICE MAP_REGION_FLAT( \
	TC_DEVICE_BASE, \
	TC_DEVICE_SIZE, \
	MT_DEVICE \| MT_RW \| MT_SECURE)


	#define TC_FLASH0_RO MAP_REGION_FLAT(V2M_FLASH0_BASE,\
	V2M_FLASH0_SIZE, \
	MT_DEVICE \| MT_RO \| MT_SECURE)

	#define PLAT_ARM_NSTIMER_FRAME_ID 0

	#define PLAT_ARM_TRUSTED_ROM_BASE 0x0
	#define PLAT_ARM_TRUSTED_ROM_SIZE 0x00080000 /* 512KB */

	#define PLAT_ARM_NSRAM_BASE 0x06000000
	#define PLAT_ARM_NSRAM_SIZE 0x00080000 /* 512KB */

	#define PLAT_ARM_DRAM2_BASE ULL(0x8080000000)
	#define PLAT_ARM_DRAM2_SIZE ULL(0x180000000)

	#define PLAT_ARM_G1S_IRQ_PROPS(grp) CSS_G1S_IRQ_PROPS(grp)
	#define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp)

	#define PLAT_ARM_SP_IMAGE_STACK_BASE (PLAT_SP_IMAGE_NS_BUF_BASE + \
	PLAT_SP_IMAGE_NS_BUF_SIZE)

	/*******************************************************************************
	* Memprotect definitions
	******************************************************************************/
	/* PSCI memory protect definitions:
	* This variable is stored in a non-secure flash because some ARM reference
	* platforms do not have secure NVRAM. Real systems that provided MEM_PROTECT
	* support must use a secure NVRAM to store the PSCI MEM_PROTECT definitions.
	*/
	#define PLAT_ARM_MEM_PROT_ADDR (V2M_FLASH0_BASE + \
	V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)

	/Secure Watchdog Constants /
	#define SBSA_SECURE_WDOG_BASE UL(0x2A480000)
	#define SBSA_SECURE_WDOG_TIMEOUT UL(100)

	#define PLAT_ARM_SCMI_CHANNEL_COUNT 1

	#define PLAT_ARM_CLUSTER_COUNT U(1)
	#define PLAT_MAX_CPUS_PER_CLUSTER U(8)
	#define PLAT_MAX_PE_PER_CPU U(1)

	#define PLAT_CSS_MHU_BASE UL(0x45400000)
	#define PLAT_MHUV2_BASE PLAT_CSS_MHU_BASE

	#define CSS_SYSTEM_PWR_DMN_LVL ARM_PWR_LVL2
	#define PLAT_MAX_PWR_LVL ARM_PWR_LVL1

	/*
	* Physical and virtual address space limits for MMU in AARCH64
	*/
	#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 36)
	#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 36)

	/* GIC related constants */
	#define PLAT_ARM_GICD_BASE UL(0x30000000)
	#define PLAT_ARM_GICC_BASE UL(0x2C000000)
	#define PLAT_ARM_GICR_BASE UL(0x30080000)

	/*
	* PLAT_CSS_MAX_SCP_BL2_SIZE is calculated using the current
	* SCP_BL2 size plus a little space for growth.
	*/
	#define PLAT_CSS_MAX_SCP_BL2_SIZE 0x20000

	/*
	* PLAT_CSS_MAX_SCP_BL2U_SIZE is calculated using the current
	* SCP_BL2U size plus a little space for growth.
	*/
	#define PLAT_CSS_MAX_SCP_BL2U_SIZE 0x20000

	/* TZC Related Constants */
	#define PLAT_ARM_TZC_BASE UL(0x25000000)
	#define PLAT_ARM_TZC_FILTERS TZC_400_REGION_ATTR_FILTER_BIT(0)

	#define TZC400_OFFSET UL(0x1000000)
	#define TZC400_COUNT 4

	#define TZC400_BASE(n) (PLAT_ARM_TZC_BASE + \
	(n * TZC400_OFFSET))

	#define TZC_NSAID_DEFAULT U(0)

	#define PLAT_ARM_TZC_NS_DEV_ACCESS \
	(TZC_REGION_ACCESS_RDWR(TZC_NSAID_DEFAULT))

	/*
	* The first region below, TC_TZC_DRAM1_BASE (0xfd000000) to
	* ARM_SCP_TZC_DRAM1_END (0xffffffff) will mark the last 48 MB of DRAM as
	* secure. The second region gives non secure access to rest of DRAM.
	*/
	#define TC_TZC_REGIONS_DEF \
	{TC_TZC_DRAM1_BASE, ARM_SCP_TZC_DRAM1_END, \
	TZC_REGION_S_RDWR, PLAT_ARM_TZC_NS_DEV_ACCESS}, \
	{TC_NS_DRAM1_BASE, TC_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \
	PLAT_ARM_TZC_NS_DEV_ACCESS}

	/* virtual address used by dynamic mem_protect for chunk_base */
	#define PLAT_ARM_MEM_PROTEC_VA_FRAME UL(0xc0000000)

	#endif /* PLATFORM_DEF_H */