| /* |
| * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef PLATFORM_DEF_H |
| #define PLATFORM_DEF_H |
| |
| #include <common/tbbr/tbbr_img_def.h> |
| #include <lib/utils_def.h> |
| #include <lib/xlat_tables/xlat_tables_defs.h> |
| #include <plat/arm/board/common/v2m_def.h> |
| #include <plat/arm/common/arm_spm_def.h> |
| #include <plat/arm/common/smccc_def.h> |
| #include <plat/common/common_def.h> |
| #include <plat/arm/soc/common/soc_css_def.h> |
| |
| #define ARM_ROTPK_HEADER_LEN 19 |
| #define ARM_ROTPK_HASH_LEN 32 |
| |
| /* Special value used to verify platform parameters from BL2 to BL31 */ |
| #define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) |
| |
| /* PL011 UART related constants */ |
| #ifdef V2M_IOFPGA_UART0_CLK_IN_HZ |
| #undef V2M_IOFPGA_UART0_CLK_IN_HZ |
| #endif |
| |
| #ifdef V2M_IOFPGA_UART1_CLK_IN_HZ |
| #undef V2M_IOFPGA_UART1_CLK_IN_HZ |
| #endif |
| |
| #define V2M_IOFPGA_UART0_CLK_IN_HZ 50000000 |
| #define V2M_IOFPGA_UART1_CLK_IN_HZ 50000000 |
| |
| /* Core/Cluster/Thread counts for diphda */ |
| #define DIPHDA_CLUSTER_COUNT U(1) |
| #define DIPHDA_MAX_CPUS_PER_CLUSTER U(4) |
| #define DIPHDA_MAX_PE_PER_CPU U(1) |
| #define DIPHDA_PRIMARY_CPU U(0) |
| |
| #define PLAT_ARM_CLUSTER_COUNT DIPHDA_CLUSTER_COUNT |
| |
| #define PLATFORM_CORE_COUNT (PLAT_ARM_CLUSTER_COUNT * \ |
| DIPHDA_MAX_CPUS_PER_CLUSTER * \ |
| DIPHDA_MAX_PE_PER_CPU) |
| |
| /* UART related constants */ |
| #define PLAT_ARM_BOOT_UART_BASE 0x1a510000 |
| #define PLAT_ARM_BOOT_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ |
| #define PLAT_ARM_RUN_UART_BASE 0x1a520000 |
| #define PLAT_ARM_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ |
| #define ARM_CONSOLE_BAUDRATE 115200 |
| #define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_RUN_UART_BASE |
| #define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_RUN_UART_CLK_IN_HZ |
| |
| /* Memory related constants */ |
| |
| /* SRAM (CVM) memory layout |
| * |
| * <ARM_TRUSTED_SRAM_BASE> |
| * |
| * partition size: sizeof(meminfo_t) = 16 bytes |
| * |
| * content: memory info area used by the next BL |
| * |
| * <ARM_FW_CONFIG_BASE> |
| * |
| * partition size: 4080 bytes |
| * |
| * <ARM_BL2_MEM_DESC_BASE> |
| * |
| * partition size: 4 KB |
| * |
| * content: |
| * |
| * Area where BL2 copies the images descriptors |
| * |
| * <ARM_BL_RAM_BASE> = <BL32_BASE> |
| * |
| * partition size: 688 KB |
| * |
| * content: |
| * |
| * BL32 (optee-os) |
| * |
| * <DIPHDA_TOS_FW_CONFIG_BASE> = 0x20ae000 |
| * |
| * partition size: 8 KB |
| * |
| * content: |
| * |
| * BL32 config (TOS_FW_CONFIG) |
| * |
| * <BL31_BASE> |
| * |
| * partition size: 140 KB |
| * |
| * content: |
| * |
| * BL31 |
| * |
| * <BL2_SIGNATURE_BASE> |
| * |
| * partition size: 4 KB |
| * |
| * content: |
| * |
| * MCUBOOT data needed to verify TF-A BL2 |
| * |
| * <BL2_BASE> |
| * |
| * partition size: 176 KB |
| * |
| * content: |
| * |
| * BL2 |
| * |
| * <ARM_NS_SHARED_RAM_BASE> = <ARM_TRUSTED_SRAM_BASE> + 1 MB |
| * |
| * partition size: 3 MB |
| * |
| * content: |
| * |
| * BL33 (u-boot) |
| */ |
| |
| /* DDR memory */ |
| #define ARM_DRAM1_BASE UL(0x80000000) |
| #define ARM_DRAM1_SIZE UL(0x80000000) |
| #define ARM_DRAM1_END (ARM_DRAM1_BASE + \ |
| ARM_DRAM1_SIZE - 1) |
| |
| /* DRAM1 and DRAM2 are the same for diphda */ |
| #define ARM_DRAM2_BASE ARM_DRAM1_BASE |
| #define ARM_DRAM2_SIZE ARM_DRAM1_SIZE |
| #define ARM_DRAM2_END ARM_DRAM1_END |
| |
| #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE |
| #define ARM_NS_DRAM1_SIZE ARM_DRAM1_SIZE |
| #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \ |
| ARM_NS_DRAM1_SIZE - 1) |
| |
| /* The first 8 KB of Trusted SRAM are used as shared memory */ |
| #define ARM_TRUSTED_SRAM_BASE UL(0x02000000) |
| #define ARM_SHARED_RAM_SIZE UL(0x00002000) /* 8 KB */ |
| #define ARM_SHARED_RAM_BASE ARM_TRUSTED_SRAM_BASE |
| |
| /* The remaining Trusted SRAM is used to load the BL images */ |
| |
| #define PLAT_ARM_TRUSTED_SRAM_SIZE UL(0x00100000) /* 1 MB */ |
| |
| #define PLAT_ARM_MAX_BL2_SIZE UL(0x0002d000) /* 180 KB */ |
| |
| #define PLAT_ARM_MAX_BL31_SIZE UL(0x00023000) /* 140 KB */ |
| |
| #define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + \ |
| ARM_SHARED_RAM_SIZE) |
| #define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \ |
| ARM_SHARED_RAM_SIZE) |
| |
| #define BL2_SIGNATURE_SIZE UL(0x00001000) /* 4 KB */ |
| #define BL2_SIGNATURE_BASE (BL2_LIMIT - \ |
| PLAT_ARM_MAX_BL2_SIZE) |
| #define BL2_BASE (BL2_LIMIT - \ |
| PLAT_ARM_MAX_BL2_SIZE + \ |
| BL2_SIGNATURE_SIZE) |
| #define BL2_LIMIT (ARM_BL_RAM_BASE + \ |
| ARM_BL_RAM_SIZE) |
| |
| #define BL31_BASE (BL2_SIGNATURE_BASE - \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| #define BL31_LIMIT BL2_SIGNATURE_BASE |
| |
| #define DIPHDA_TOS_FW_CONFIG_BASE (BL31_BASE - \ |
| DIPHDA_TOS_FW_CONFIG_SIZE) |
| #define DIPHDA_TOS_FW_CONFIG_SIZE UL(0x00002000) /* 8 KB */ |
| #define DIPHDA_TOS_FW_CONFIG_LIMIT BL31_BASE |
| |
| #define BL32_BASE ARM_BL_RAM_BASE |
| #define PLAT_ARM_MAX_BL32_SIZE (DIPHDA_TOS_FW_CONFIG_BASE - \ |
| BL32_BASE) /* 688 KB */ |
| #define BL32_LIMIT (BL32_BASE + \ |
| PLAT_ARM_MAX_BL32_SIZE) |
| |
| /* SPD_spmd settings */ |
| |
| #define PLAT_ARM_SPMC_BASE BL32_BASE |
| #define PLAT_ARM_SPMC_SIZE PLAT_ARM_MAX_BL32_SIZE |
| |
| /* NS memory */ |
| |
| /* The last 3 MB of the SRAM is allocated to the non secure area */ |
| #define ARM_NS_SHARED_RAM_BASE (ARM_TRUSTED_SRAM_BASE + \ |
| PLAT_ARM_TRUSTED_SRAM_SIZE) |
| #define ARM_NS_SHARED_RAM_SIZE UL(0x00300000) /* 3 MB */ |
| |
| /* end of the definition of SRAM memory layout */ |
| |
| /* NOR Flash */ |
| |
| #define PLAT_ARM_FIP_BASE UL(0x08131000) |
| #define PLAT_ARM_FIP_MAX_SIZE UL(0x1ff000) /* 1.996 MB */ |
| |
| #define PLAT_ARM_NVM_BASE V2M_FLASH0_BASE |
| #define PLAT_ARM_NVM_SIZE UL(0x02000000) /* 32 MB */ |
| |
| #define PLAT_ARM_FLASH_IMAGE_BASE PLAT_ARM_FIP_BASE |
| #define PLAT_ARM_FLASH_IMAGE_MAX_SIZE PLAT_ARM_FIP_MAX_SIZE |
| |
| /* |
| * Some data must be aligned on the biggest cache line size in the platform. |
| * This is known only to the platform as it might have a combination of |
| * integrated and external caches. |
| */ |
| #define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT) |
| #define ARM_CACHE_WRITEBACK_SHIFT 6 |
| |
| /* |
| * Define FW_CONFIG area base and limit. Leave enough space for BL2 meminfo. |
| * FW_CONFIG is intended to host the device tree. Currently, This area is not |
| * used because diphda platform doesn't use a device tree at TF-A level. |
| */ |
| #define ARM_FW_CONFIG_BASE (ARM_SHARED_RAM_BASE \ |
| + sizeof(meminfo_t)) |
| #define ARM_FW_CONFIG_LIMIT (ARM_SHARED_RAM_BASE \ |
| + (ARM_SHARED_RAM_SIZE >> 1)) |
| |
| /* |
| * Boot parameters passed from BL2 to BL31/BL32 are stored here |
| */ |
| #define ARM_BL2_MEM_DESC_BASE ARM_FW_CONFIG_LIMIT |
| #define ARM_BL2_MEM_DESC_LIMIT ARM_BL_RAM_BASE |
| |
| /* |
| * The max number of regions like RO(code), coherent and data required by |
| * different BL stages which need to be mapped in the MMU. |
| */ |
| #define ARM_BL_REGIONS 3 |
| #define PLAT_ARM_MMAP_ENTRIES 8 |
| #define MAX_XLAT_TABLES 5 |
| #define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \ |
| ARM_BL_REGIONS) |
| #define MAX_IO_DEVICES 2 |
| #define MAX_IO_HANDLES 3 |
| #define MAX_IO_BLOCK_DEVICES 1 |
| |
| /* GIC related constants */ |
| #define PLAT_ARM_GICD_BASE 0x1C010000 |
| #define PLAT_ARM_GICC_BASE 0x1C02F000 |
| |
| /* MHUv2 Secure Channel receiver and sender */ |
| #define PLAT_SDK700_MHU0_SEND 0x1B800000 |
| #define PLAT_SDK700_MHU0_RECV 0x1B810000 |
| |
| /* Timer/watchdog related constants */ |
| #define ARM_SYS_CNTCTL_BASE UL(0x1a200000) |
| #define ARM_SYS_CNTREAD_BASE UL(0x1a210000) |
| #define ARM_SYS_TIMCTL_BASE UL(0x1a220000) |
| |
| #define SYS_COUNTER_FREQ_IN_TICKS UL(50000000) /* 50MHz */ |
| |
| #define DIPHDA_IRQ_TZ_WDOG 32 |
| #define DIPHDA_IRQ_SEC_SYS_TIMER 34 |
| |
| #define PLAT_MAX_PWR_LVL 2 |
| /* |
| * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The |
| * power levels have a 1:1 mapping with the MPIDR affinity levels. |
| */ |
| #define ARM_PWR_LVL0 MPIDR_AFFLVL0 |
| #define ARM_PWR_LVL1 MPIDR_AFFLVL1 |
| #define ARM_PWR_LVL2 MPIDR_AFFLVL2 |
| |
| /* |
| * Macros for local power states in ARM platforms encoded by State-ID field |
| * within the power-state parameter. |
| */ |
| /* Local power state for power domains in Run state. */ |
| #define ARM_LOCAL_STATE_RUN U(0) |
| /* Local power state for retention. Valid only for CPU power domains */ |
| #define ARM_LOCAL_STATE_RET U(1) |
| /* Local power state for OFF/power-down. Valid for CPU and cluster |
| * power domains |
| */ |
| #define ARM_LOCAL_STATE_OFF U(2) |
| |
| #define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE |
| #define PLAT_ARM_NSTIMER_FRAME_ID U(1) |
| |
| #define PLAT_ARM_NS_IMAGE_BASE (ARM_NS_SHARED_RAM_BASE) |
| |
| #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32) |
| #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32) |
| |
| /* |
| * This macro defines the deepest retention state possible. A higher state |
| * ID will represent an invalid or a power down state. |
| */ |
| #define PLAT_MAX_RET_STATE 1 |
| |
| /* |
| * This macro defines the deepest power down states possible. Any state ID |
| * higher than this is invalid. |
| */ |
| #define PLAT_MAX_OFF_STATE 2 |
| |
| #define PLATFORM_STACK_SIZE UL(0x440) |
| |
| #define DIPHDA_EXTERNAL_FLASH MAP_REGION_FLAT( \ |
| PLAT_ARM_NVM_BASE, \ |
| PLAT_ARM_NVM_SIZE, \ |
| MT_DEVICE | MT_RO | MT_SECURE) |
| |
| #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \ |
| ARM_SHARED_RAM_BASE, \ |
| ARM_SHARED_RAM_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| #define ARM_MAP_NS_SHARED_RAM MAP_REGION_FLAT( \ |
| ARM_NS_SHARED_RAM_BASE, \ |
| ARM_NS_SHARED_RAM_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| |
| #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \ |
| ARM_NS_DRAM1_BASE, \ |
| ARM_NS_DRAM1_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| |
| #define ARM_MAP_BL_RO MAP_REGION_FLAT( \ |
| BL_CODE_BASE, \ |
| BL_CODE_END \ |
| - BL_CODE_BASE, \ |
| MT_CODE | MT_SECURE), \ |
| MAP_REGION_FLAT( \ |
| BL_RO_DATA_BASE, \ |
| BL_RO_DATA_END \ |
| - BL_RO_DATA_BASE, \ |
| MT_RO_DATA | MT_SECURE) |
| #if USE_COHERENT_MEM |
| #define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \ |
| BL_COHERENT_RAM_BASE, \ |
| BL_COHERENT_RAM_END \ |
| - BL_COHERENT_RAM_BASE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| #endif |
| |
| /* |
| * Map the region for the optional device tree configuration with read and |
| * write permissions |
| */ |
| #define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT( \ |
| ARM_FW_CONFIG_BASE, \ |
| (ARM_FW_CONFIG_LIMIT- \ |
| ARM_FW_CONFIG_BASE), \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| #define DIPHDA_DEVICE_BASE (0x1A000000) |
| #define DIPHDA_DEVICE_SIZE (0x26000000) |
| #define DIPHDA_MAP_DEVICE MAP_REGION_FLAT( \ |
| DIPHDA_DEVICE_BASE, \ |
| DIPHDA_DEVICE_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #define ARM_IRQ_SEC_PHY_TIMER 29 |
| |
| #define ARM_IRQ_SEC_SGI_0 8 |
| #define ARM_IRQ_SEC_SGI_1 9 |
| #define ARM_IRQ_SEC_SGI_2 10 |
| #define ARM_IRQ_SEC_SGI_3 11 |
| #define ARM_IRQ_SEC_SGI_4 12 |
| #define ARM_IRQ_SEC_SGI_5 13 |
| #define ARM_IRQ_SEC_SGI_6 14 |
| #define ARM_IRQ_SEC_SGI_7 15 |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3 |
| * terminology. On a GICv2 system or mode, the lists will be merged and treated |
| * as Group 0 interrupts. |
| */ |
| #define ARM_G1S_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_EDGE) |
| |
| #define ARM_G0_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, (grp), \ |
| GIC_INTR_CFG_EDGE) |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 |
| * terminology. On a GICv2 system or mode, the lists will be merged and treated |
| * as Group 0 interrupts. |
| */ |
| #define PLAT_ARM_G1S_IRQ_PROPS(grp) \ |
| ARM_G1S_IRQ_PROPS(grp), \ |
| INTR_PROP_DESC(DIPHDA_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, \ |
| (grp), GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(DIPHDA_IRQ_SEC_SYS_TIMER, \ |
| GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL) |
| |
| #define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp) |
| |
| #endif /* PLATFORM_DEF_H */ |
