| /* |
| * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef PLATFORM_H |
| #define PLATFORM_H |
| |
| #include <stdint.h> |
| |
| #include <lib/psci/psci.h> |
| #if defined(SPD_spmd) |
| #include <services/spm_core_manifest.h> |
| #endif |
| #if TRNG_SUPPORT |
| #include "plat_trng.h" |
| #endif |
| #include <drivers/fwu/fwu_metadata.h> |
| |
| /******************************************************************************* |
| * Forward declarations |
| ******************************************************************************/ |
| struct auth_img_desc_s; |
| struct meminfo; |
| struct image_info; |
| struct entry_point_info; |
| struct image_desc; |
| struct bl_load_info; |
| struct bl_params; |
| struct mmap_region; |
| struct spm_mm_boot_info; |
| struct sp_res_desc; |
| enum fw_enc_status_t; |
| |
| /******************************************************************************* |
| * plat_get_rotpk_info() flags |
| ******************************************************************************/ |
| #define ROTPK_IS_HASH (1 << 0) |
| /* Flag used to skip verification of the certificate ROTPK while the platform |
| ROTPK is not deployed */ |
| #define ROTPK_NOT_DEPLOYED (1 << 1) |
| |
| /******************************************************************************* |
| * plat_get_enc_key_info() flags |
| ******************************************************************************/ |
| /* |
| * Flag used to notify caller that information provided in key buffer is an |
| * identifier rather than an actual key. |
| */ |
| #define ENC_KEY_IS_IDENTIFIER (1 << 0) |
| |
| /******************************************************************************* |
| * Function declarations |
| ******************************************************************************/ |
| /******************************************************************************* |
| * Mandatory common functions |
| ******************************************************************************/ |
| unsigned int plat_get_syscnt_freq2(void); |
| |
| int plat_get_image_source(unsigned int image_id, |
| uintptr_t *dev_handle, |
| uintptr_t *image_spec); |
| uintptr_t plat_get_ns_image_entrypoint(void); |
| unsigned int plat_my_core_pos(void); |
| int plat_core_pos_by_mpidr(u_register_t mpidr); |
| int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size); |
| |
| #if STACK_PROTECTOR_ENABLED |
| /* |
| * Return a new value to be used for the stack protection's canary. |
| * |
| * Ideally, this value is a random number that is impossible to predict by an |
| * attacker. |
| */ |
| u_register_t plat_get_stack_protector_canary(void); |
| #endif /* STACK_PROTECTOR_ENABLED */ |
| |
| /******************************************************************************* |
| * Mandatory interrupt management functions |
| ******************************************************************************/ |
| uint32_t plat_ic_get_pending_interrupt_id(void); |
| uint32_t plat_ic_get_pending_interrupt_type(void); |
| uint32_t plat_ic_acknowledge_interrupt(void); |
| uint32_t plat_ic_get_interrupt_type(uint32_t id); |
| void plat_ic_end_of_interrupt(uint32_t id); |
| uint32_t plat_interrupt_type_to_line(uint32_t type, |
| uint32_t security_state); |
| |
| /******************************************************************************* |
| * Optional interrupt management functions, depending on chosen EL3 components. |
| ******************************************************************************/ |
| unsigned int plat_ic_get_running_priority(void); |
| int plat_ic_is_spi(unsigned int id); |
| int plat_ic_is_ppi(unsigned int id); |
| int plat_ic_is_sgi(unsigned int id); |
| unsigned int plat_ic_get_interrupt_active(unsigned int id); |
| void plat_ic_disable_interrupt(unsigned int id); |
| void plat_ic_enable_interrupt(unsigned int id); |
| int plat_ic_has_interrupt_type(unsigned int type); |
| void plat_ic_set_interrupt_type(unsigned int id, unsigned int type); |
| void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority); |
| void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target); |
| void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode, |
| u_register_t mpidr); |
| void plat_ic_set_interrupt_pending(unsigned int id); |
| void plat_ic_clear_interrupt_pending(unsigned int id); |
| unsigned int plat_ic_set_priority_mask(unsigned int mask); |
| unsigned int plat_ic_get_interrupt_id(unsigned int raw); |
| |
| /******************************************************************************* |
| * Optional common functions (may be overridden) |
| ******************************************************************************/ |
| uintptr_t plat_get_my_stack(void); |
| void plat_report_exception(unsigned int exception_type); |
| int plat_crash_console_init(void); |
| int plat_crash_console_putc(int c); |
| void plat_crash_console_flush(void); |
| void plat_error_handler(int err) __dead2; |
| void plat_panic_handler(void) __dead2; |
| const char *plat_log_get_prefix(unsigned int log_level); |
| void bl2_plat_preload_setup(void); |
| int plat_try_next_boot_source(void); |
| |
| /******************************************************************************* |
| * Mandatory BL1 functions |
| ******************************************************************************/ |
| void bl1_early_platform_setup(void); |
| void bl1_plat_arch_setup(void); |
| void bl1_platform_setup(void); |
| struct meminfo *bl1_plat_sec_mem_layout(void); |
| |
| /******************************************************************************* |
| * Optional EL3 component functions in BL31 |
| ******************************************************************************/ |
| |
| /* SDEI platform functions */ |
| #if SDEI_SUPPORT |
| void plat_sdei_setup(void); |
| int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode); |
| void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr); |
| #endif |
| |
| void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie, |
| void *handle, uint64_t flags); |
| void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie, |
| void *handle, uint64_t flags); |
| |
| /* |
| * The following function is mandatory when the |
| * firmware update feature is used. |
| */ |
| int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size, |
| unsigned int flags); |
| |
| /******************************************************************************* |
| * Optional BL1 functions (may be overridden) |
| ******************************************************************************/ |
| /* |
| * The following functions are used for image loading process in BL1. |
| */ |
| void bl1_plat_set_ep_info(unsigned int image_id, |
| struct entry_point_info *ep_info); |
| /* |
| * The following functions are mandatory when firmware update |
| * feature is used and optional otherwise. |
| */ |
| unsigned int bl1_plat_get_next_image_id(void); |
| struct image_desc *bl1_plat_get_image_desc(unsigned int image_id); |
| |
| /* |
| * The following functions are used by firmware update |
| * feature and may optionally be overridden. |
| */ |
| __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved); |
| |
| /* |
| * This BL1 function can be used by the platforms to update/use image |
| * information for a given `image_id`. |
| */ |
| int bl1_plat_handle_pre_image_load(unsigned int image_id); |
| int bl1_plat_handle_post_image_load(unsigned int image_id); |
| |
| /******************************************************************************* |
| * Mandatory BL2 functions |
| ******************************************************************************/ |
| void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3); |
| void bl2_plat_arch_setup(void); |
| void bl2_platform_setup(void); |
| struct meminfo *bl2_plat_sec_mem_layout(void); |
| |
| /* |
| * This function can be used by the platforms to update/use image |
| * information for given `image_id`. |
| */ |
| int bl2_plat_handle_pre_image_load(unsigned int image_id); |
| int bl2_plat_handle_post_image_load(unsigned int image_id); |
| |
| /******************************************************************************* |
| * Optional BL2 functions (may be overridden) |
| ******************************************************************************/ |
| #if MEASURED_BOOT |
| void bl2_plat_mboot_init(void); |
| void bl2_plat_mboot_finish(void); |
| int plat_mboot_measure_image(unsigned int image_id); |
| #else |
| static inline void bl2_plat_mboot_init(void) |
| { |
| } |
| static inline void bl2_plat_mboot_finish(void) |
| { |
| } |
| static inline int plat_mboot_measure_image(unsigned int image_id __unused) |
| { |
| return 0; |
| } |
| #endif /* MEASURED_BOOT */ |
| |
| /******************************************************************************* |
| * Mandatory BL2 at EL3 functions: Must be implemented if BL2_AT_EL3 image is |
| * supported |
| ******************************************************************************/ |
| void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1, |
| u_register_t arg2, u_register_t arg3); |
| void bl2_el3_plat_arch_setup(void); |
| |
| /******************************************************************************* |
| * Optional BL2 at EL3 functions (may be overridden) |
| ******************************************************************************/ |
| void bl2_el3_plat_prepare_exit(void); |
| |
| /******************************************************************************* |
| * Mandatory BL2U functions. |
| ******************************************************************************/ |
| void bl2u_early_platform_setup(struct meminfo *mem_layout, |
| void *plat_info); |
| void bl2u_plat_arch_setup(void); |
| void bl2u_platform_setup(void); |
| |
| /******************************************************************************* |
| * Conditionally mandatory BL2U functions for CSS platforms. |
| ******************************************************************************/ |
| /* |
| * This function is used to perform any platform-specific actions required to |
| * handle the BL2U_SCP firmware. |
| */ |
| int bl2u_plat_handle_scp_bl2u(void); |
| |
| /******************************************************************************* |
| * Mandatory BL31 functions |
| ******************************************************************************/ |
| void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, |
| u_register_t arg2, u_register_t arg3); |
| void bl31_plat_arch_setup(void); |
| void bl31_platform_setup(void); |
| void bl31_plat_runtime_setup(void); |
| struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type); |
| |
| /******************************************************************************* |
| * Mandatory PSCI functions (BL31) |
| ******************************************************************************/ |
| int plat_setup_psci_ops(uintptr_t sec_entrypoint, |
| const struct plat_psci_ops **psci_ops); |
| const unsigned char *plat_get_power_domain_tree_desc(void); |
| |
| /******************************************************************************* |
| * Optional PSCI functions (BL31). |
| ******************************************************************************/ |
| void plat_psci_stat_accounting_start(const psci_power_state_t *state_info); |
| void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info); |
| u_register_t plat_psci_stat_get_residency(unsigned int lvl, |
| const psci_power_state_t *state_info, |
| unsigned int last_cpu_idx); |
| plat_local_state_t plat_get_target_pwr_state(unsigned int lvl, |
| const plat_local_state_t *states, |
| unsigned int ncpu); |
| |
| /******************************************************************************* |
| * Optional BL31 functions (may be overridden) |
| ******************************************************************************/ |
| void bl31_plat_enable_mmu(uint32_t flags); |
| |
| /******************************************************************************* |
| * Optional BL32 functions (may be overridden) |
| ******************************************************************************/ |
| void bl32_plat_enable_mmu(uint32_t flags); |
| |
| /******************************************************************************* |
| * Trusted Board Boot functions |
| ******************************************************************************/ |
| int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len, |
| unsigned int *flags); |
| int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr); |
| int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr); |
| int plat_set_nv_ctr2(void *cookie, const struct auth_img_desc_s *img_desc, |
| unsigned int nv_ctr); |
| int get_mbedtls_heap_helper(void **heap_addr, size_t *heap_size); |
| int plat_get_enc_key_info(enum fw_enc_status_t fw_enc_status, uint8_t *key, |
| size_t *key_len, unsigned int *flags, |
| const uint8_t *img_id, size_t img_id_len); |
| |
| /******************************************************************************* |
| * Secure Partitions functions |
| ******************************************************************************/ |
| const struct mmap_region *plat_get_secure_partition_mmap(void *cookie); |
| const struct spm_mm_boot_info *plat_get_secure_partition_boot_info( |
| void *cookie); |
| int plat_spm_sp_rd_load(struct sp_res_desc *rd, const void *ptr, size_t size); |
| int plat_spm_sp_get_next_address(void **sp_base, size_t *sp_size, |
| void **rd_base, size_t *rd_size); |
| #if defined(SPD_spmd) |
| int plat_spm_core_manifest_load(spmc_manifest_attribute_t *manifest, |
| const void *pm_addr); |
| #endif |
| /******************************************************************************* |
| * Mandatory BL image load functions(may be overridden). |
| ******************************************************************************/ |
| /* |
| * This function returns pointer to the list of images that the |
| * platform has populated to load. |
| */ |
| struct bl_load_info *plat_get_bl_image_load_info(void); |
| |
| /* |
| * This function returns a pointer to the shared memory that the |
| * platform has kept aside to pass trusted firmware related |
| * information that next BL image could need. |
| */ |
| struct bl_params *plat_get_next_bl_params(void); |
| |
| /* |
| * This function flushes to main memory all the params that are |
| * passed to next image. |
| */ |
| void plat_flush_next_bl_params(void); |
| |
| /* |
| * The below function enable Trusted Firmware components like SPDs which |
| * haven't migrated to the new platform API to compile on platforms which |
| * have the compatibility layer disabled. |
| */ |
| unsigned int platform_core_pos_helper(unsigned long mpidr); |
| |
| /* |
| * Optional function to get SOC version |
| */ |
| int32_t plat_get_soc_version(void); |
| |
| /* |
| * Optional function to get SOC revision |
| */ |
| int32_t plat_get_soc_revision(void); |
| |
| /* |
| * Optional function to check for SMCCC function availability for platform |
| */ |
| int32_t plat_is_smccc_feature_available(u_register_t fid); |
| |
| /******************************************************************************* |
| * FWU platform specific functions |
| ******************************************************************************/ |
| int plat_fwu_set_metadata_image_source(unsigned int image_id, |
| uintptr_t *dev_handle, |
| uintptr_t *image_spec); |
| void plat_fwu_set_images_source(struct fwu_metadata *metadata); |
| |
| #endif /* PLATFORM_H */ |