plat/nxp/common/setup/ls_bl2_el3_setup.c

/*
 * Copyright 2018-2020 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 */

#include <assert.h>

#include <common/desc_image_load.h>
#include <dcfg.h>
#ifdef POLICY_FUSE_PROVISION
#include <fuse_io.h>
#endif
#include <mmu_def.h>
#include <plat_common.h>
#ifdef NXP_NV_SW_MAINT_LAST_EXEC_DATA
#include <plat_nv_storage.h>
#endif

#pragma weak bl2_el3_early_platform_setup
#pragma weak bl2_el3_plat_arch_setup
#pragma weak bl2_el3_plat_prepare_exit

static dram_regions_info_t dram_regions_info  = {0};

/*******************************************************************************
 * Return the pointer to the 'dram_regions_info structure of the DRAM.
 * This structure is populated after init_ddr().
 ******************************************************************************/
dram_regions_info_t *get_dram_regions_info(void)
{
	return &dram_regions_info;
}

#ifdef DDR_INIT
static void populate_dram_regions_info(void)
{
	long long dram_remain_size = dram_regions_info.total_dram_size;
	uint8_t reg_id = 0U;

	dram_regions_info.region[reg_id].addr = NXP_DRAM0_ADDR;
	dram_regions_info.region[reg_id].size =
			dram_remain_size > NXP_DRAM0_MAX_SIZE ?
				NXP_DRAM0_MAX_SIZE : dram_remain_size;

	if (dram_regions_info.region[reg_id].size != NXP_DRAM0_SIZE) {
		ERROR("Incorrect DRAM0 size is defined in platform_def.h\n");
	}

	dram_remain_size -= dram_regions_info.region[reg_id].size;
	dram_regions_info.region[reg_id].size -= (NXP_SECURE_DRAM_SIZE
						+ NXP_SP_SHRD_DRAM_SIZE);

	assert(dram_regions_info.region[reg_id].size > 0);

	/* Reducing total dram size by 66MB */
	dram_regions_info.total_dram_size -= (NXP_SECURE_DRAM_SIZE
						+ NXP_SP_SHRD_DRAM_SIZE);

#if defined(NXP_DRAM1_ADDR) && defined(NXP_DRAM1_MAX_SIZE)
	if (dram_remain_size > 0) {
		reg_id++;
		dram_regions_info.region[reg_id].addr = NXP_DRAM1_ADDR;
		dram_regions_info.region[reg_id].size =
				dram_remain_size > NXP_DRAM1_MAX_SIZE ?
					NXP_DRAM1_MAX_SIZE : dram_remain_size;
		dram_remain_size -= dram_regions_info.region[reg_id].size;
	}
#endif
#if defined(NXP_DRAM2_ADDR) && defined(NXP_DRAM2_MAX_SIZE)
	if (dram_remain_size > 0) {
		reg_id++;
		dram_regions_info.region[reg_id].addr = NXP_DRAM1_ADDR;
		dram_regions_info.region[reg_id].size =
				dram_remain_size > NXP_DRAM1_MAX_SIZE ?
					NXP_DRAM1_MAX_SIZE : dram_remain_size;
		dram_remain_size -= dram_regions_info.region[reg_id].size;
	}
#endif
	reg_id++;
	dram_regions_info.num_dram_regions = reg_id;
}
#endif

#ifdef IMAGE_BL32
/*******************************************************************************
 * Gets SPSR for BL32 entry
 ******************************************************************************/
static uint32_t ls_get_spsr_for_bl32_entry(void)
{
	/*
	 * The Secure Payload Dispatcher service is responsible for
	 * setting the SPSR prior to entry into the BL32 image.
	 */
	return 0U;
}
#endif

/*******************************************************************************
 * Gets SPSR for BL33 entry
 ******************************************************************************/
#ifndef AARCH32
static uint32_t ls_get_spsr_for_bl33_entry(void)
{
	unsigned int mode;
	uint32_t spsr;

	/* Figure out what mode we enter the non-secure world in */
	mode = (el_implemented(2) != EL_IMPL_NONE) ? MODE_EL2 : MODE_EL1;

	/*
	 * TODO: Consider the possibility of specifying the SPSR in
	 * the FIP ToC and allowing the platform to have a say as
	 * well.
	 */
	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
	return spsr;
}
#else
/*******************************************************************************
 * Gets SPSR for BL33 entry
 ******************************************************************************/
static uint32_t ls_get_spsr_for_bl33_entry(void)
{
	unsigned int hyp_status, mode, spsr;

	hyp_status = GET_VIRT_EXT(read_id_pfr1());

	mode = (hyp_status) ? MODE32_hyp : MODE32_svc;

	/*
	 * TODO: Consider the possibility of specifying the SPSR in
	 * the FIP ToC and allowing the platform to have a say as
	 * well.
	 */
	spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
	return spsr;
}
#endif /* AARCH32 */

void bl2_el3_early_platform_setup(u_register_t arg0 __unused,
				  u_register_t arg1 __unused,
				  u_register_t arg2 __unused,
				  u_register_t arg3 __unused)
{
	/*
	 * SoC specific early init
	 * Any errata handling or SoC specific early initialization can
	 * be done here
	 * Set Counter Base Frequency in CNTFID0 and in cntfrq_el0.
	 * Initialize the interconnect.
	 * Enable coherency for primary CPU cluster
	 */
	soc_early_init();

	/* Initialise the IO layer and register platform IO devices */
	plat_io_setup();

	if (dram_regions_info.total_dram_size > 0) {
		populate_dram_regions_info();
	}

#ifdef NXP_NV_SW_MAINT_LAST_EXEC_DATA
	read_nv_app_data();
#if DEBUG
	const nv_app_data_t *nv_app_data = get_nv_data();

	INFO("Value of warm_reset flag = 0x%x\n", nv_app_data->warm_rst_flag);
	INFO("Value of WDT flag = 0x%x\n", nv_app_data->wdt_rst_flag);
#endif
#endif
}

/*******************************************************************************
 * Perform the very early platform specific architectural setup here. At the
 * moment this is only initializes the mmu in a quick and dirty way.
 ******************************************************************************/
void ls_bl2_el3_plat_arch_setup(void)
{
	unsigned int flags = 0U;
	/* Initialise the IO layer and register platform IO devices */
	ls_setup_page_tables(
#if SEPARATE_RW_AND_NOLOAD
			      BL2_START,
			      BL2_LIMIT - BL2_START,
#else
			      BL2_BASE,
			      (unsigned long)(&__BL2_END__) - BL2_BASE,
#endif
			      BL_CODE_BASE,
			      BL_CODE_END,
			      BL_RO_DATA_BASE,
			      BL_RO_DATA_END
#if USE_COHERENT_MEM
			      , BL_COHERENT_RAM_BASE,
			      BL_COHERENT_RAM_END
#endif
			      );

	if ((dram_regions_info.region[0].addr == 0)
		&& (dram_regions_info.total_dram_size == 0)) {
		flags = XLAT_TABLE_NC;
	}

#ifdef AARCH32
	enable_mmu_secure(0);
#else
	enable_mmu_el3(flags);
#endif
}

void bl2_el3_plat_arch_setup(void)
{
	ls_bl2_el3_plat_arch_setup();
}

void bl2_platform_setup(void)
{
	/*
	 * Perform platform setup before loading the image.
	 */
}

/* Handling image information by platform. */
int ls_bl2_handle_post_image_load(unsigned int image_id)
{
	int err = 0;
	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);

	assert(bl_mem_params);

	switch (image_id) {
	case BL31_IMAGE_ID:
		bl_mem_params->ep_info.args.arg3 =
					(u_register_t) &dram_regions_info;

		/* Pass the value of PORSR1 register in Argument 4 */
		bl_mem_params->ep_info.args.arg4 =
					(u_register_t)read_reg_porsr1();
		flush_dcache_range((uintptr_t)&dram_regions_info,
				sizeof(dram_regions_info));
		break;
#if defined(AARCH64) && defined(IMAGE_BL32)
	case BL32_IMAGE_ID:
		bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl32_entry();
		break;
#endif
	case BL33_IMAGE_ID:
		/* BL33 expects to receive the primary CPU MPID (through r0) */
		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
		bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl33_entry();
		break;
	}

	return err;
}

/*******************************************************************************
 * This function can be used by the platforms to update/use image
 * information for given `image_id`.
 ******************************************************************************/
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
	return ls_bl2_handle_post_image_load(image_id);
}

void bl2_el3_plat_prepare_exit(void)
{
	return soc_bl2_prepare_exit();
}

/* Called to do the dynamic initialization required
 * before loading the next image.
 */
void bl2_plat_preload_setup(void)
{

	soc_preload_setup();

	if (dram_regions_info.total_dram_size < NXP_DRAM0_SIZE) {
		NOTICE("ERROR: DRAM0 Size is not correctly configured.");
		assert(false);
	}

	if ((dram_regions_info.region[0].addr == 0)
		&& (dram_regions_info.total_dram_size > 0)) {
		populate_dram_regions_info();

		mmap_add_ddr_region_dynamically();
	}

	/* setup the memory region access permissions */
	soc_mem_access();

#ifdef POLICY_FUSE_PROVISION
	fip_fuse_provisioning((uintptr_t)FUSE_BUF, FUSE_SZ);
#endif
}