| Khadas VIM3 |
| |
| Description |
| =========== |
| |
| This configuration builds a complete image for the Khadas VIM3 to be flashed |
| on an SD-card. |
| |
| How to build it |
| =============== |
| |
| Select the default configuration for the target: |
| $ make khadas_vim3_defconfig |
| |
| Optional: modify the configuration: |
| $ make menuconfig |
| |
| Build: |
| $ make |
| |
| Result of the build |
| =================== |
| output/images/ |
| +-- amlogic-boot-fip |
| + +-- build-fip.sh |
| + +-- g12a.inc |
| + `-- khadas-vim3 |
| + +-- acs.bin |
| + +-- acs_tool.py |
| + +-- aml_ddr.fw |
| + +-- aml_encrypt_g12b |
| + +-- bl2.bin |
| + +-- bl301.bin |
| + +-- bl30.bin |
| + +-- bl31.bin |
| + +-- bl31.img |
| + +-- blx_fix.sh |
| + +-- ddr3_1d.fw |
| + +-- ddr4_1d.fw |
| + +-- ddr4_2d.fw |
| + +-- diag_lpddr4.fw |
| + +-- lpddr3_1d.fw |
| + +-- lpddr4_1d.fw |
| + +-- lpddr4_2d.fw |
| + +-- Makefile |
| + `-- piei.fw |
| +-- boot.vfat |
| +-- extlinux |
| + `-- extlinux.conf |
| +-- fip |
| + +-- u-boot.bin |
| + +-- u-boot.bin.sd.bin |
| + +-- u-boot.bin.usb.bl2 |
| + `-- u-boot.bin.usb.tpl |
| +-- Image |
| +-- meson-g12b-a311d-khadas-vim3.dtb |
| +-- rootfs.ext2 |
| +-- rootfs.ext4 -> rootfs.ext2 |
| +-- rootfs.tar |
| +-- sdcard.img |
| `-- u-boot.bin |
| |
| The post-image script uses the files in the amlogic-boot-fip folder to sign |
| the bootloader image before integrating it into the sdcard image. |
| |
| To copy the image file to the sdcard use dd: |
| $ dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Tested hardware |
| =============== |
| Khadas vim3 (rev. 14) |
