| MangoPi MQ1RDW2 |
| =============== |
| |
| MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer. |
| It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated |
| 128MB DDR3-1600 RAM. |
| Board features: |
| - USB-OTG Type-C socket |
| - USB-HOST Type-C socket |
| - 2x 18 pin GPIO headers |
| - TF card slot |
| - RTL8723DS WiFi module with ext. antenna connector |
| - 40 pin RGB FPC connector |
| - 6 pin CTP FPC connector |
| - 24 pin DVP FPC connector |
| - onboard mic |
| - onboard audio amplifier |
| - FEL,reset button |
| |
| How to build |
| ============ |
| |
| $ make mangopi_mq1rdw2_defconfig |
| $ make |
| |
| Wifi |
| ========== |
| |
| Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or |
| /etc/wpa_supplicant.conf once connected to the board: |
| |
| * Replace YOURSSID with your AP ssid |
| * Replace YOURPASSWD with your AP password |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and |
| plug in a USB-C cable to the OTG or HOST connector to boot the system. |
