| Intro |
| ===== |
| |
| This directory contains a Buildroot configuration for building a |
| Pine64 PineCube. |
| |
| Board homepage: https://www.pine64.org/cube/ |
| Board wiki: https://wiki.pine64.org/wiki/PineCube |
| |
| How to build it |
| =============== |
| |
| $ make pine64_pinecube_defconfig |
| $ make |
| |
| Note: you will need access to the internet to download the required |
| sources. |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| $ sudo sync |
| |
| Insert the micro SDcard in your PineCube and power it up. The console |
| is on the serial port 2, 115200 8N1 (check Wiki for board pinout). |
