| Pine64 Star64 |
| ============= |
| |
| The Star64 is a low-cost RISC-V 64-bit based platform, powered by a |
| Starfive JH7110 processor. |
| |
| https://wiki.pine64.org/wiki/STAR64 |
| |
| How to build |
| ============ |
| |
| $ make pine64_star64_defconfig |
| $ make |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX conv=fdatasync |
| |
| Preparing the board |
| =================== |
| |
| Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). |
| |
| Insert your SD card. |
| |
| Power-up the board using a 12V power supply. |
