| STM32MP157C-Odyssey |
| |
| Intro |
| ===== |
| |
| This configuration supports the STM32MP157C-Odyssey platform: |
| |
| https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/ |
| |
| How to build |
| ============ |
| |
| $ make stm32mp157c_odyssey_defconfig |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called |
| "sdcard.img" in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an microSD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Boot the board |
| ============== |
| |
| (1) Insert the microSD card in connector J21. |
| |
| (2) Connect to the UART connector J24 (located next the the DC jack |
| J24 and the battery connector J20) and run your serial communication |
| program on /dev/ttyACM0. |
| |
| (3) Plug a USB-C cable in J6 or a center-positive 12V jack into J17 |
| to power-up the board. |
| |
| (4) The system will start, with the console on UART. |
