| Lichee RV dock |
| =============== |
| |
| Lichee RV Dock is a RISC-V Linux development kits with high integration, small |
| size and affordable price designed for opensource developer. It's equipped with |
| HDMI interface and it supports many screen by its screen convert board. It's |
| also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module, |
| an analog microphone and a speaker jack interface. |
| |
| How to build |
| ============ |
| |
| $ make sipeed_lichee_rv_dock_defconfig |
| $ make |
| |
| Wifi |
| ========== |
| |
| Edit board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf or |
| /etc/wpa_supplicant.conf once connected to the board: |
| |
| * Replace YOURSSID with your AP ssid |
| * Replace YOURPASSWD with your AP password |
| |
| Bluetooth |
| ========== |
| |
| To make the device discoverable and pairable, once connected to the board: |
| |
| * bluetoothctl power on |
| * bluetoothctl discoverable yes |
| * bluetoothctl pairable yes |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Connect a TTL UART to the debug connector, insert the microSD card and |
| plug in a USB-C cable to the PWR connector to boot the system. |
