| MX6X Udoo Neo board |
| =================== |
| http://www.udoo.org/udoo-neo/ |
| |
| Build: |
| ====== |
| |
| To build a minimal support for these boards: |
| |
| $ make mx6sx_udoo_neo_defconfig |
| $ make |
| |
| Files created in the output directory: |
| ====================================== |
| |
| output/images |
| . |
| ├── boot.scr |
| ├── imx6sx-udoo-neo-basic.dtb |
| ├── imx6sx-udoo-neo-extended.dtb |
| ├── imx6sx-udoo-neo-full.dtb |
| ├── rootfs.ext2 |
| ├── rootfs.ext4 -> rootfs.ext2 |
| ├── rootfs.tar |
| ├── sdcard.img |
| ├── SPL |
| ├── u-boot.bin |
| ├── u-boot.img |
| └── zImage |
| |
| Creating bootable SD card: |
| ========================== |
| |
| Buildroot prepares a bootable "sdcard.img" image in the output/images/ |
| directory, ready to be dumped on an SD card: |
| |
| dd if=output/images/sdcard.img of=/dev/<your-microsd-device> |
| |
| For details about the medium image layout, see the definition in |
| board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl. |
| |
| Booting: |
| ======== |
| |
| Serial console: |
| --------------- |
| The Udoo Neo features the serial console "UART1" on the pin header "P7". The |
| Uart pins are as follows (see board labels): |
| |
| pin 46: rx |
| pin 47: tx |
| |
| Baudrate for this board is 115200. |
| |
| Login: |
| ------ |
| Enter 'root' as login user, and the prompt is ready. |
| |
| Documentation: |
| ============== |
| |
| documentation link: |
| ------------------- |
| https://www.udoo.org/docs-neo/Introduction/Introduction.html |
| |
| forum link: |
| ----------- |
| https://www.udoo.org/forum/forums/udoo-neo.39/ |
