| ****************************************** |
| Xilinx VCK190 board - Versal |
| ****************************************** |
| |
| This document describes the Buildroot support for the VCK190 |
| board by Xilinx, based on Versal. It has been tested with the |
| VCK190 production board. |
| |
| Evaluation board features can be found here with the link below. |
| |
| VCK190: |
| https://www.xilinx.com/products/boards-and-kits/vck190.html |
| |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make versal_vck190_defconfig |
| |
| Compile everything and build the rootfs image: |
| |
| $ make |
| |
| Result of the build |
| ------------------- |
| |
| After building, you should get a tree like this: |
| |
| output/images/ |
| +-- boot.bin |
| +-- boot.vfat |
| +-- Image |
| +-- rootfs.ext2 |
| +-- rootfs.ext4 -> rootfs.ext2 |
| +-- sdcard.img |
| +-- system.dtb -> versal-vck190-rev1.1.dtb |
| `-- versal-vck190-rev1.1.dtb |
| |
| How to write the SD card |
| ======================== |
| |
| WARNING! This will destroy all the card content. Use with care! |
| |
| The sdcard.img file is a complete bootable image ready to be written |
| on the boot medium. To install it, simply copy the image to an SD |
| card: |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Where 'sdX' is the device node of the SD. |
| |
| Eject the SD card, insert it in the board, and power it up. |
