| # Architecture |
| BR2_aarch64=y |
| BR2_cortex_a72=y |
| |
| # patches |
| BR2_GLOBAL_PATCH_DIR="board/freescale/common/patches" |
| |
| # Toolchain |
| # Linux headers same as kernel, a 5.10 series |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y |
| |
| # System configuration |
| BR2_TARGET_GENERIC_HOSTNAME="ls1028a" |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y |
| BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" |
| BR2_SYSTEM_DHCP="eno0" |
| BR2_ROOTFS_OVERLAY="board/freescale/ls1028ardb/rootfs_overlay" |
| BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" |
| BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1028ardb/genimage.cfg" |
| |
| # Kernel |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,LSDK-21.08)/linux-LSDK-21.08.tar.gz" |
| BR2_LINUX_KERNEL_DEFCONFIG="imx_v8" |
| BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config" |
| BR2_LINUX_KERNEL_DTS_SUPPORT=y |
| BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb" |
| BR2_LINUX_KERNEL_INSTALL_TARGET=y |
| |
| # Target package |
| BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y |
| |
| # Filesystem |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| BR2_TARGET_ROOTFS_EXT2_SIZE="120M" |
| # BR2_TARGET_ROOTFS_TAR is not set |
| |
| # Bootloaders |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE=y |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,LSDK-21.08)/atf-LSDK-21.08.tar.gz" |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb" |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd" |
| BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl" |
| BR2_TARGET_UBOOT=y |
| BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y |
| BR2_TARGET_UBOOT_CUSTOM_TARBALL=y |
| BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,LSDK-21.08)/u-boot-LSDK-21.08.tar.gz" |
| BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1028ardb_tfa" |
| BR2_TARGET_UBOOT_NEEDS_DTC=y |
| |
| # Host utilities |
| BR2_PACKAGE_HOST_GENIMAGE=y |
| BR2_PACKAGE_HOST_QORIQ_RCW=y |
| BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin" |
