| BR2_aarch64=y |
| BR2_cortex_a53=y |
| BR2_ARM_FPU_VFPV4=y |
| |
| BR2_TOOLCHAIN_BUILDROOT_CXX=y |
| |
| BR2_SYSTEM_DHCP="eth0" |
| |
| # Linux headers same as kernel, a 6.1 series |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y |
| |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz" |
| BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3" |
| |
| # Build the DTB from the kernel sources |
| BR2_LINUX_KERNEL_DTS_SUPPORT=y |
| BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus broadcom/bcm2837-rpi-3-b" |
| |
| BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y |
| |
| BR2_PACKAGE_RPI_FIRMWARE=y |
| BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y |
| BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y |
| BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3-64/config_3_64bit.txt" |
| |
| # Required tools to create the SD image |
| BR2_PACKAGE_HOST_DOSFSTOOLS=y |
| BR2_PACKAGE_HOST_GENIMAGE=y |
| BR2_PACKAGE_HOST_MTOOLS=y |
| |
| # Filesystem / image |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| BR2_TARGET_ROOTFS_EXT2_SIZE="120M" |
| # BR2_TARGET_ROOTFS_TAR is not set |
| BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh" |
| BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh" |
| |
| # Enable compressed kernel module support |
| BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y |
| BR2_PACKAGE_KMOD_TOOLS=y |
| BR2_PACKAGE_XZ=y |
| BR2_PACKAGE_KMOD=y |
| BR2_PACKAGE_HOST_KMOD_XZ=y |
