| ################################################################################ |
| # |
| # qemu |
| # |
| ################################################################################ |
| |
| # When updating the version, check whether the list of supported targets |
| # needs to be updated. |
| QEMU_VERSION = 9.0.0 |
| QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.xz |
| QEMU_SITE = https://download.qemu.org |
| QEMU_SELINUX_MODULES = qemu virt |
| QEMU_LICENSE = GPL-2.0, LGPL-2.1, MIT, BSD-3-Clause, BSD-2-Clause, Others/BSD-1c |
| QEMU_LICENSE_FILES = COPYING COPYING.LIB |
| # NOTE: there is no top-level license file for non-(L)GPL licenses; |
| # the non-(L)GPL license texts are specified in the affected |
| # individual source files. |
| QEMU_CPE_ID_VENDOR = qemu |
| |
| # Need to ignore the following CVEs because the CPE database does |
| # not have an entry for the 8.1.1 version yet. |
| QEMU_IGNORE_CVES += CVE-2023-4135 |
| QEMU_IGNORE_CVES += CVE-2023-3354 |
| QEMU_IGNORE_CVES += CVE-2023-3180 |
| |
| #------------------------------------------------------------- |
| |
| # The build system is now partly based on Meson. |
| # However, building is still done with configure and make as in previous versions of QEMU. |
| |
| # Target-qemu |
| QEMU_DEPENDENCIES = \ |
| host-meson \ |
| host-pkgconf \ |
| host-python3 \ |
| host-python-distlib \ |
| libglib2 \ |
| zlib |
| |
| # Need the LIBS variable because librt and libm are |
| # not automatically pulled. :-( |
| QEMU_LIBS = -lrt -lm |
| |
| QEMU_OPTS = |
| |
| QEMU_VARS = LIBTOOL=$(HOST_DIR)/bin/libtool |
| |
| # If we want to build all emulation targets, we just need to either enable -user |
| # and/or -system emulation appropriately. |
| # Otherwise, if we want only a subset of targets, we must still enable all of |
| # them, so that QEMU properly builds a list of default targets from which it |
| # checks if the specified sub-set is valid. |
| |
| ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y) |
| QEMU_DEPENDENCIES += pixman |
| QEMU_OPTS += --enable-system |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_AARCH64) += aarch64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_ALPHA) += alpha-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_ARM) += arm-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_AVR) += avr-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_CRIS) += cris-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_HPPA) += hppa-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_I386) += i386-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_LOONGARCH64) += loongarch64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_M68K) += m68k-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MICROBLAZE) += microblaze-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MICROBLAZEEL) += microblazeel-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS) += mips-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS64) += mips64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS64EL) += mips64el-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPSEL) += mipsel-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_NIOS2) += nios2-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_OR1K) += or1k-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_PPC) += ppc-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_PPC64) += ppc64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_RISCV32) += riscv32-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_RISCV64) += riscv64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_RX) += rx-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_S390X) += s390x-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SH4) += sh4-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SH4EB) += sh4eb-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SPARC) += sparc-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SPARC64) += sparc64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_TRICORE) += tricore-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_X86_64) += x86_64-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_XTENSA) += xtensa-softmmu |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_XTENSAEB) += xtensaeb-softmmu |
| else |
| QEMU_OPTS += --disable-system |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_LINUX_USER),y) |
| QEMU_OPTS += --enable-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_AARCH64) += aarch64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_AARCH64_BE) += aarch64_be-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_ALPHA) += alpha-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_ARM) += arm-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_ARMEB) += armeb-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_CRIS) += cris-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_HEXAGON) += hexagon-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_HPPA) += hppa-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_I386) += i386-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_LOONGARCH64) += loongarch64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_M68K) += m68k-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MICROBLAZE) += microblaze-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MICROBLAZEEL) += microblazeel-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS) += mips-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS64) += mips64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPS64EL) += mips64el-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPSEL) += mipsel-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPSN32) += mipsn32-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_MIPSN32EL) += mipsn32el-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_NIOS2) += nios2-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_OR1K) += or1k-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_PPC) += ppc-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_PPC64) += ppc64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_PPC64LE) += ppc64le-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_RISCV32) += riscv32-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_RISCV64) += riscv64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_S390X) += s390x-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SH4) += sh4-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SH4EB) += sh4eb-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SPARC) += sparc-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SPARC32PLUS) += sparc32plus-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_SPARC64) += sparc64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_X86_64) += x86_64-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_XTENSA) += xtensa-linux-user |
| QEMU_TARGET_LIST_$(BR2_PACKAGE_QEMU_TARGET_XTENSAEB) += xtensaeb-linux-user |
| else |
| QEMU_OPTS += --disable-linux-user |
| endif |
| |
| # Build the list of desired targets, if any. |
| ifeq ($(BR2_PACKAGE_QEMU_CHOOSE_TARGETS),y) |
| QEMU_TARGET_LIST = $(strip $(QEMU_TARGET_LIST_y)) |
| ifeq ($(BR_BUILDING).$(QEMU_TARGET_LIST),y.) |
| $(error "No emulator target has ben chosen") |
| endif |
| QEMU_OPTS += --target-list="$(QEMU_TARGET_LIST)" |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y) |
| QEMU_OPTS += --disable-vhost-user |
| else |
| QEMU_OPTS += --enable-vhost-user |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_SLIRP),y) |
| QEMU_OPTS += --enable-slirp |
| QEMU_DEPENDENCIES += slirp |
| else |
| QEMU_OPTS += --disable-slirp |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_SDL),y) |
| QEMU_OPTS += --enable-sdl |
| QEMU_DEPENDENCIES += sdl2 |
| QEMU_VARS += SDL2_CONFIG=$(STAGING_DIR)/usr/bin/sdl2-config |
| else |
| QEMU_OPTS += --disable-sdl |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_FDT),y) |
| QEMU_OPTS += --enable-fdt |
| QEMU_DEPENDENCIES += dtc |
| else |
| QEMU_OPTS += --disable-fdt |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_TRACING),y) |
| QEMU_OPTS += --enable-trace-backends=log |
| else |
| QEMU_OPTS += --enable-trace-backends=nop |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_TOOLS),y) |
| QEMU_OPTS += --enable-tools |
| else |
| QEMU_OPTS += --disable-tools |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_GUEST_AGENT),y) |
| QEMU_OPTS += --enable-guest-agent |
| else |
| QEMU_OPTS += --disable-guest-agent |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBFUSE3),y) |
| QEMU_OPTS += --enable-fuse --enable-fuse-lseek |
| QEMU_DEPENDENCIES += libfuse3 |
| else |
| QEMU_OPTS += --disable-fuse --disable-fuse-lseek |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) |
| QEMU_OPTS += --enable-seccomp |
| QEMU_DEPENDENCIES += libseccomp |
| else |
| QEMU_OPTS += --disable-seccomp |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBSSH),y) |
| QEMU_OPTS += --enable-libssh |
| QEMU_DEPENDENCIES += libssh |
| else |
| QEMU_OPTS += --disable-libssh |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBUSB),y) |
| QEMU_OPTS += --enable-libusb |
| QEMU_DEPENDENCIES += libusb |
| else |
| QEMU_OPTS += --disable-libusb |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBVNCSERVER),y) |
| QEMU_OPTS += \ |
| --enable-vnc \ |
| --disable-vnc-sasl |
| QEMU_DEPENDENCIES += libvncserver |
| ifeq ($(BR2_PACKAGE_LIBPNG),y) |
| QEMU_OPTS += --enable-png |
| QEMU_DEPENDENCIES += libpng |
| else |
| QEMU_OPTS += --disable-png |
| endif |
| ifeq ($(BR2_PACKAGE_JPEG),y) |
| QEMU_OPTS += --enable-vnc-jpeg |
| QEMU_DEPENDENCIES += jpeg |
| else |
| QEMU_OPTS += --disable-vnc-jpeg |
| endif |
| else |
| QEMU_OPTS += --disable-vnc |
| endif |
| |
| ifeq ($(BR2_PACKAGE_NETTLE),y) |
| QEMU_OPTS += --enable-nettle |
| QEMU_DEPENDENCIES += nettle |
| else |
| QEMU_OPTS += --disable-nettle |
| endif |
| |
| ifeq ($(BR2_PACKAGE_NUMACTL),y) |
| QEMU_OPTS += --enable-numa |
| QEMU_DEPENDENCIES += numactl |
| else |
| QEMU_OPTS += --disable-numa |
| endif |
| |
| ifeq ($(BR2_PACKAGE_PIPEWIRE),y) |
| QEMU_OPTS += --enable-pipewire |
| QEMU_DEPENDENCIES += pipewire |
| else |
| QEMU_OPTS += --disable-pipewire |
| endif |
| |
| ifeq ($(BR2_PACKAGE_SPICE),y) |
| QEMU_OPTS += --enable-spice |
| QEMU_DEPENDENCIES += spice |
| else |
| QEMU_OPTS += --disable-spice |
| endif |
| |
| ifeq ($(BR2_PACKAGE_USBREDIR),y) |
| QEMU_OPTS += --enable-usb-redir |
| QEMU_DEPENDENCIES += usbredir |
| else |
| QEMU_OPTS += --disable-usb-redir |
| endif |
| |
| ifeq ($(BR2_STATIC_LIBS),y) |
| QEMU_OPTS += --static |
| endif |
| |
| ifeq ($(BR2_PACKAGE_QEMU_BLOBS),y) |
| QEMU_OPTS += --enable-install-blobs |
| else |
| QEMU_OPTS += --disable-install-blobs |
| endif |
| |
| # Override CPP, as it expects to be able to call it like it'd |
| # call the compiler. |
| define QEMU_CONFIGURE_CMDS |
| unset TARGET_DIR; \ |
| cd $(@D); \ |
| LIBS='$(QEMU_LIBS)' \ |
| $(TARGET_CONFIGURE_OPTS) \ |
| $(TARGET_CONFIGURE_ARGS) \ |
| CPP="$(TARGET_CC) -E" \ |
| $(QEMU_VARS) \ |
| ./configure \ |
| --prefix=/usr \ |
| --cross-prefix=$(TARGET_CROSS) \ |
| --audio-drv-list= \ |
| --python=$(HOST_DIR)/bin/python3 \ |
| --ninja=$(HOST_DIR)/bin/ninja \ |
| --disable-alsa \ |
| --disable-bpf \ |
| --disable-brlapi \ |
| --disable-bsd-user \ |
| --disable-cap-ng \ |
| --disable-capstone \ |
| --disable-containers \ |
| --disable-coreaudio \ |
| --disable-curl \ |
| --disable-curses \ |
| --disable-dbus-display \ |
| --disable-docs \ |
| --disable-dsound \ |
| --disable-hvf \ |
| --disable-jack \ |
| --disable-libiscsi \ |
| --disable-linux-aio \ |
| --disable-linux-io-uring \ |
| --disable-malloc-trim \ |
| --disable-membarrier \ |
| --disable-mpath \ |
| --disable-netmap \ |
| --disable-opengl \ |
| --disable-oss \ |
| --disable-pa \ |
| --disable-plugins \ |
| --disable-rbd \ |
| --disable-sanitizers \ |
| --disable-selinux \ |
| --disable-sparse \ |
| --disable-strip \ |
| --disable-vde \ |
| --disable-vhost-crypto \ |
| --disable-vhost-user-blk-server \ |
| --disable-virtfs \ |
| --disable-whpx \ |
| --disable-xen \ |
| --enable-attr \ |
| --enable-kvm \ |
| --enable-vhost-net \ |
| --disable-download \ |
| --disable-hexagon-idef-parser \ |
| $(QEMU_OPTS) |
| endef |
| |
| define QEMU_BUILD_CMDS |
| unset TARGET_DIR; \ |
| $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) |
| endef |
| |
| define QEMU_INSTALL_TARGET_CMDS |
| unset TARGET_DIR; \ |
| $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(QEMU_MAKE_ENV) DESTDIR=$(TARGET_DIR) install |
| endef |
| |
| $(eval $(generic-package)) |
| |
| #------------------------------------------------------------- |
| # Host-qemu |
| |
| HOST_QEMU_DEPENDENCIES = \ |
| host-libglib2 \ |
| host-meson \ |
| host-pixman \ |
| host-pkgconf \ |
| host-python3 \ |
| host-python-distlib \ |
| host-slirp \ |
| host-zlib |
| |
| # BR ARCH qemu |
| # ------- ---- |
| # arm arm |
| # armeb armeb |
| # i486 i386 |
| # i586 i386 |
| # i686 i386 |
| # x86_64 x86_64 |
| # m68k m68k |
| # microblaze microblaze |
| # mips mips |
| # mipsel mipsel |
| # mips64 mips64 |
| # mips64el mips64el |
| # nios2 nios2 |
| # or1k or1k |
| # powerpc ppc |
| # powerpc64 ppc64 |
| # powerpc64le ppc64 (system) / ppc64le (usermode) |
| # sh2a not supported |
| # sh4 sh4 |
| # sh4eb sh4eb |
| # sh4a sh4 |
| # sh4aeb sh4eb |
| # sparc sparc |
| # sparc64 sparc64 |
| # xtensa xtensa |
| |
| HOST_QEMU_ARCH = $(ARCH) |
| ifeq ($(HOST_QEMU_ARCH),armeb) |
| HOST_QEMU_SYS_ARCH = arm |
| endif |
| ifeq ($(HOST_QEMU_ARCH),i486) |
| HOST_QEMU_ARCH = i386 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),i586) |
| HOST_QEMU_ARCH = i386 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),i686) |
| HOST_QEMU_ARCH = i386 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),powerpc) |
| HOST_QEMU_ARCH = ppc |
| endif |
| ifeq ($(HOST_QEMU_ARCH),powerpc64) |
| HOST_QEMU_ARCH = ppc64 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),powerpc64le) |
| HOST_QEMU_ARCH = ppc64le |
| HOST_QEMU_SYS_ARCH = ppc64 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),sh4a) |
| HOST_QEMU_ARCH = sh4 |
| endif |
| ifeq ($(HOST_QEMU_ARCH),sh4aeb) |
| HOST_QEMU_ARCH = sh4eb |
| endif |
| HOST_QEMU_SYS_ARCH ?= $(HOST_QEMU_ARCH) |
| |
| HOST_QEMU_CFLAGS = $(HOST_CFLAGS) |
| |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE),y) |
| HOST_QEMU_TARGETS += $(HOST_QEMU_SYS_ARCH)-softmmu |
| HOST_QEMU_OPTS += --enable-system --enable-fdt |
| HOST_QEMU_CFLAGS += -I$(HOST_DIR)/include/libfdt |
| HOST_QEMU_DEPENDENCIES += host-dtc |
| else |
| HOST_QEMU_OPTS += --disable-system |
| endif |
| |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE),y) |
| HOST_QEMU_TARGETS += $(HOST_QEMU_ARCH)-linux-user |
| HOST_QEMU_OPTS += --enable-linux-user |
| |
| HOST_QEMU_HOST_SYSTEM_TYPE = $(shell uname -s) |
| ifneq ($(HOST_QEMU_HOST_SYSTEM_TYPE),Linux) |
| $(error "qemu-user can only be used on Linux hosts") |
| endif |
| |
| else # BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE |
| HOST_QEMU_OPTS += --disable-linux-user |
| endif # BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE |
| |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_VDE2),y) |
| HOST_QEMU_OPTS += --enable-vde |
| HOST_QEMU_DEPENDENCIES += host-vde2 |
| endif |
| |
| # virtfs-proxy-helper is the only user of libcap-ng. |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_VIRTFS),y) |
| HOST_QEMU_OPTS += --enable-virtfs --enable-cap-ng |
| HOST_QEMU_DEPENDENCIES += host-libcap-ng |
| else |
| HOST_QEMU_OPTS += --disable-virtfs --disable-cap-ng |
| endif |
| |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_USB),y) |
| HOST_QEMU_OPTS += --enable-libusb |
| HOST_QEMU_DEPENDENCIES += host-libusb |
| else |
| HOST_QEMU_OPTS += --disable-libusb |
| endif |
| |
| # Override CPP, as it expects to be able to call it like it'd |
| # call the compiler. |
| define HOST_QEMU_CONFIGURE_CMDS |
| unset TARGET_DIR; \ |
| cd $(@D); $(HOST_CONFIGURE_OPTS) CPP="$(HOSTCC) -E" \ |
| ./configure \ |
| --target-list="$(HOST_QEMU_TARGETS)" \ |
| --prefix="$(HOST_DIR)" \ |
| --interp-prefix=$(STAGING_DIR) \ |
| --cc="$(HOSTCC)" \ |
| --host-cc="$(HOSTCC)" \ |
| --extra-cflags="$(HOST_QEMU_CFLAGS)" \ |
| --extra-ldflags="$(HOST_LDFLAGS)" \ |
| --python=$(HOST_DIR)/bin/python3 \ |
| --ninja=$(HOST_DIR)/bin/ninja \ |
| --disable-alsa \ |
| --disable-bpf \ |
| --disable-bzip2 \ |
| --disable-containers \ |
| --disable-coreaudio \ |
| --disable-curl \ |
| --disable-dbus-display \ |
| --disable-docs \ |
| --disable-dsound \ |
| --disable-jack \ |
| --disable-libssh \ |
| --disable-linux-aio \ |
| --disable-linux-io-uring \ |
| --disable-netmap \ |
| --disable-oss \ |
| --disable-pa \ |
| --disable-pipewire \ |
| --disable-sdl \ |
| --disable-selinux \ |
| --disable-vde \ |
| --disable-vhost-user-blk-server \ |
| --disable-vnc-jpeg \ |
| --disable-plugins \ |
| --disable-png \ |
| --disable-vnc-sasl \ |
| --enable-slirp \ |
| --enable-tools \ |
| --disable-guest-agent \ |
| $(HOST_QEMU_OPTS) |
| endef |
| |
| define HOST_QEMU_BUILD_CMDS |
| unset TARGET_DIR; \ |
| $(HOST_MAKE_ENV) $(MAKE) -C $(@D) |
| endef |
| |
| define HOST_QEMU_INSTALL_CMDS |
| unset TARGET_DIR; \ |
| $(HOST_MAKE_ENV) $(MAKE) -C $(@D) install |
| endef |
| |
| # install symlink to qemu-system |
| ifeq ($(BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE),y) |
| define HOST_QEMU_POST_INSTALL_SYMLINK |
| ln -sf ./qemu-system-$(HOST_QEMU_ARCH) $(HOST_DIR)/bin/qemu-system |
| endef |
| HOST_QEMU_POST_INSTALL_HOOKS += HOST_QEMU_POST_INSTALL_SYMLINK |
| endif |
| |
| $(eval $(host-generic-package)) |
| |
| # variable used by other packages |
| QEMU_USER = $(HOST_DIR)/bin/qemu-$(HOST_QEMU_ARCH) |
