| // SPDX-License-Identifier: (GPL-2.0-only OR MIT) |
| /* |
| * Copyright 2024 NXP |
| */ |
| |
| #include <dt-bindings/dma/fsl-edma.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| #include "imx95-clock.h" |
| #include "imx95-pinfunc.h" |
| #include "imx95-power.h" |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| A55_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l0>; |
| }; |
| |
| A55_1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x100>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l1>; |
| }; |
| |
| A55_2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x200>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l2>; |
| }; |
| |
| A55_3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x300>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l3>; |
| }; |
| |
| A55_4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x400>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l4>; |
| }; |
| |
| A55_5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x500>; |
| power-domains = <&scmi_perf IMX95_PERF_A55>; |
| power-domain-names = "perf"; |
| enable-method = "psci"; |
| #cooling-cells = <2>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l5>; |
| }; |
| |
| l2_cache_l0: l2-cache-l0 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l1: l2-cache-l1 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l2: l2-cache-l2 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l3: l2-cache-l3 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l4: l2-cache-l4 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l5: l2-cache-l5 { |
| compatible = "cache"; |
| cache-size = <65536>; |
| cache-line-size = <64>; |
| cache-sets = <256>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l3_cache: l3-cache { |
| compatible = "cache"; |
| cache-size = <524288>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&A55_0>; |
| }; |
| |
| core1 { |
| cpu = <&A55_1>; |
| }; |
| |
| core2 { |
| cpu = <&A55_2>; |
| }; |
| |
| core3 { |
| cpu = <&A55_3>; |
| }; |
| |
| core4 { |
| cpu = <&A55_4>; |
| }; |
| |
| core5 { |
| cpu = <&A55_5>; |
| }; |
| }; |
| }; |
| }; |
| |
| dummy: clock-dummy { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| clock-output-names = "dummy"; |
| }; |
| |
| clk_ext1: clock-ext1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133000000>; |
| clock-output-names = "clk_ext1"; |
| }; |
| |
| sai1_mclk: clock-sai-mclk1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency= <0>; |
| clock-output-names = "sai1_mclk"; |
| }; |
| |
| sai2_mclk: clock-sai-mclk2 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency= <0>; |
| clock-output-names = "sai2_mclk"; |
| }; |
| |
| sai3_mclk: clock-sai-mclk3 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency= <0>; |
| clock-output-names = "sai3_mclk"; |
| }; |
| |
| sai4_mclk: clock-sai-mclk4 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency= <0>; |
| clock-output-names = "sai4_mclk"; |
| }; |
| |
| sai5_mclk: clock-sai-mclk5 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency= <0>; |
| clock-output-names = "sai5_mclk"; |
| }; |
| |
| osc_24m: clock-24m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc_24m"; |
| }; |
| |
| sram1: sram@204c0000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x204c0000 0x0 0x18000>; |
| ranges = <0x0 0x0 0x204c0000 0x18000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| firmware { |
| scmi { |
| compatible = "arm,scmi"; |
| mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>; |
| shmem = <&scmi_buf0>, <&scmi_buf1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| scmi_devpd: protocol@11 { |
| reg = <0x11>; |
| #power-domain-cells = <1>; |
| }; |
| |
| scmi_perf: protocol@13 { |
| reg = <0x13>; |
| #power-domain-cells = <1>; |
| }; |
| |
| scmi_clk: protocol@14 { |
| reg = <0x14>; |
| #clock-cells = <1>; |
| }; |
| |
| scmi_sensor: protocol@15 { |
| reg = <0x15>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| scmi_iomuxc: protocol@19 { |
| reg = <0x19>; |
| }; |
| |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a55-pmu"; |
| interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| thermal_zones: thermal-zones { |
| a55-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <2000>; |
| thermal-sensors = <&scmi_sensor 1>; |
| |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_crit0: trip1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; |
| clock-frequency = <24000000>; |
| arm,no-tick-in-suspend; |
| interrupt-parent = <&gic>; |
| }; |
| |
| gic: interrupt-controller@48000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0 0x48000000 0 0x10000>, |
| <0 0x48060000 0 0xc0000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| dma-noncoherent; |
| ranges; |
| |
| its: msi-controller@48040000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0 0x48040000 0 0x20000>; |
| msi-controller; |
| #msi-cells = <1>; |
| dma-noncoherent; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| aips2: bus@42000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x0 0x42000000 0x0 0x800000>; |
| ranges = <0x42000000 0x0 0x42000000 0x8000000>, |
| <0x28000000 0x0 0x28000000 0x10000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| edma2: dma-controller@42000000 { |
| compatible = "fsl,imx95-edma5"; |
| reg = <0x42000000 0x210000>; |
| #dma-cells = <3>; |
| dma-channels = <64>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "dma"; |
| }; |
| |
| edma3: dma-controller@42210000 { |
| compatible = "fsl,imx95-edma5"; |
| reg = <0x42210000 0x210000>; |
| #dma-cells = <3>; |
| dma-channels = <64>; |
| interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "dma"; |
| }; |
| |
| mu7: mailbox@42430000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x42430000 0x10000>; |
| interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| wdog3: watchdog@42490000 { |
| compatible = "fsl,imx93-wdt"; |
| reg = <0x42490000 0x10000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| timeout-sec = <40>; |
| status = "disabled"; |
| }; |
| |
| tpm3: pwm@424e0000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x424e0000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tpm4: pwm@424f0000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x424f0000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_TPM4>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tpm5: pwm@42500000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x42500000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_TPM5>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tpm6: pwm@42510000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x42510000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_TPM6>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| lpi2c3: i2c@42530000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x42530000 0x10000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C3>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c4: i2c@42540000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x42540000 0x10000>; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C4>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi3: spi@42550000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x42550000 0x10000>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI3>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi4: spi@42560000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x42560000 0x10000>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI4>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@42570000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x42570000 0x1000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART3>; |
| clock-names = "ipg"; |
| dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@42580000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x42580000 0x1000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART4>; |
| clock-names = "ipg"; |
| dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@42590000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x42590000 0x1000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART5>; |
| clock-names = "ipg"; |
| dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart6: serial@425a0000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x425a0000 0x1000>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART6>; |
| clock-names = "ipg"; |
| dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| flexcan2: can@425b0000 { |
| compatible = "fsl,imx95-flexcan"; |
| reg = <0x425b0000 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_CAN2>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <40000000>; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| flexcan3: can@42600000 { |
| compatible = "fsl,imx95-flexcan"; |
| reg = <0x42600000 0x10000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_CAN3>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <40000000>; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| flexspi1: spi@425e0000 { |
| compatible = "nxp,imx8mm-fspi"; |
| reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>; |
| reg-names = "fspi_base", "fspi_mmap"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>, |
| <&scmi_clk IMX95_CLK_FLEXSPI1>; |
| clock-names = "fspi_en", "fspi"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; |
| assigned-clock-rates = <200000000>; |
| status = "disabled"; |
| }; |
| |
| sai3: sai@42650000 { |
| compatible = "fsl,imx95-sai"; |
| reg = <0x42650000 0x10000>; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI3>, <&dummy>, |
| <&dummy>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai4: sai@42660000 { |
| compatible = "fsl,imx95-sai"; |
| reg = <0x42660000 0x10000>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI4>, <&dummy>, |
| <&dummy>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai5: sai@42670000 { |
| compatible = "fsl,imx95-sai"; |
| reg = <0x42670000 0x10000>; |
| interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI5>, <&dummy>, |
| <&dummy>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| xcvr: xcvr@42680000 { |
| compatible = "fsl,imx95-xcvr"; |
| reg = <0x42680000 0x800>, <0x42680800 0x400>, |
| <0x42680c00 0x080>, <0x42680e00 0x080>; |
| reg-names = "ram", "regs", "rxfifo", "txfifo"; |
| interrupts = /* XCVR IRQ 0 */ |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| /* XCVR IRQ 1 */ |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_SPDIF>, |
| <&dummy>, |
| <&scmi_clk IMX95_CLK_AUDIOXCVR>; |
| clock-names = "ipg", "phy", "spba", "pll_ipg"; |
| dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart7: serial@42690000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x42690000 0x1000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART7>; |
| clock-names = "ipg"; |
| dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart8: serial@426a0000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x426a0000 0x1000>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART8>; |
| clock-names = "ipg"; |
| dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c5: i2c@426b0000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x426b0000 0x10000>; |
| interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C5>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c6: i2c@426c0000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x426c0000 0x10000>; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C6>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c7: i2c@426d0000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x426d0000 0x10000>; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C7>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c8: i2c@426e0000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x426e0000 0x10000>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C8>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi5: spi@426f0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x426f0000 0x10000>; |
| interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI5>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi6: spi@42700000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x42700000 0x10000>; |
| interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI6>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi7: spi@42710000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x42710000 0x10000>; |
| interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI7>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi8: spi@42720000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x42720000 0x10000>; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI8>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mu8: mailbox@42730000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x42730000 0x10000>; |
| interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| flexcan4: can@427c0000 { |
| compatible = "fsl,imx95-flexcan"; |
| reg = <0x427c0000 0x10000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_CAN4>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <40000000>; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| flexcan5: can@427d0000 { |
| compatible = "fsl,imx95-flexcan"; |
| reg = <0x427d0000 0x10000>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_CAN5>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <40000000>; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips3: bus@42800000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0 0x42800000 0 0x800000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x42800000 0x0 0x42800000 0x800000>; |
| |
| usdhc1: mmc@42850000 { |
| compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; |
| reg = <0x42850000 0x10000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_WAKEUPAXI>, |
| <&scmi_clk IMX95_CLK_USDHC1>; |
| clock-names = "ipg", "ahb", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| fsl,tuning-start-tap = <1>; |
| fsl,tuning-step= <2>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: mmc@42860000 { |
| compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; |
| reg = <0x42860000 0x10000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_WAKEUPAXI>, |
| <&scmi_clk IMX95_CLK_USDHC2>; |
| clock-names = "ipg", "ahb", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <4>; |
| fsl,tuning-start-tap = <1>; |
| fsl,tuning-step= <2>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: mmc@428b0000 { |
| compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; |
| reg = <0x428b0000 0x10000>; |
| interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_WAKEUPAXI>, |
| <&scmi_clk IMX95_CLK_USDHC3>; |
| clock-names = "ipg", "ahb", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <4>; |
| fsl,tuning-start-tap = <1>; |
| fsl,tuning-step= <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpio2: gpio@43810000 { |
| compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; |
| reg = <0x0 0x43810000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&scmi_iomuxc 0 4 32>; |
| }; |
| |
| gpio3: gpio@43820000 { |
| compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; |
| reg = <0x0 0x43820000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>, |
| <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>; |
| }; |
| |
| gpio4: gpio@43840000 { |
| compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; |
| reg = <0x0 0x43840000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>; |
| }; |
| |
| gpio5: gpio@43850000 { |
| compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; |
| reg = <0x0 0x43850000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, |
| <&scmi_clk IMX95_CLK_BUSWAKEUP>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>; |
| }; |
| |
| aips1: bus@44000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x0 0x44000000 0x0 0x800000>; |
| ranges = <0x44000000 0x0 0x44000000 0x800000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| edma1: dma-controller@44000000 { |
| compatible = "fsl,imx93-edma3"; |
| reg = <0x44000000 0x200000>; |
| #dma-cells = <3>; |
| dma-channels = <31>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| clock-names = "dma"; |
| }; |
| |
| mu1: mailbox@44220000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x44220000 0x10000>; |
| interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| tpm1: pwm@44310000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x44310000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tpm2: pwm@44320000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x44320000 0x1000>; |
| clocks = <&scmi_clk IMX95_CLK_TPM2>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| lpi2c1: i2c@44340000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x44340000 0x10000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C1>, |
| <&scmi_clk IMX95_CLK_BUSAON>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpi2c2: i2c@44350000 { |
| compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; |
| reg = <0x44350000 0x10000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPI2C2>, |
| <&scmi_clk IMX95_CLK_BUSAON>; |
| clock-names = "per", "ipg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi1: spi@44360000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x44360000 0x10000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI1>, |
| <&scmi_clk IMX95_CLK_BUSAON>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpspi2: spi@44370000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; |
| reg = <0x44370000 0x10000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPSPI2>, |
| <&scmi_clk IMX95_CLK_BUSAON>; |
| clock-names = "per", "ipg"; |
| dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@44380000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x44380000 0x1000>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART1>; |
| clock-names = "ipg"; |
| dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@44390000 { |
| compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", |
| "fsl,imx7ulp-lpuart"; |
| reg = <0x44390000 0x1000>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_LPUART2>; |
| clock-names = "ipg"; |
| dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| flexcan1: can@443a0000 { |
| compatible = "fsl,imx95-flexcan"; |
| reg = <0x443a0000 0x10000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>, |
| <&scmi_clk IMX95_CLK_CAN1>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <40000000>; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| sai1: sai@443b0000 { |
| compatible = "fsl,imx95-sai"; |
| reg = <0x443b0000 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI1>, <&dummy>, |
| <&dummy>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| micfil: micfil@44520000 { |
| compatible = "fsl,imx95-micfil", "fsl,imx93-micfil"; |
| reg = <0x44520000 0x10000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>, |
| <&scmi_clk IMX95_CLK_PDM>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&dummy>; |
| clock-names = "ipg_clk", "ipg_clk_app", |
| "pll8k", "pll11k", "clkext3"; |
| dmas = <&edma1 6 0 5>; |
| dma-names = "rx"; |
| status = "disabled"; |
| }; |
| |
| adc1: adc@44530000 { |
| compatible = "nxp,imx93-adc"; |
| reg = <0x44530000 0x10000>; |
| interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_ADC>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| mu2: mailbox@445b0000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x445b0000 0x1000>; |
| ranges; |
| interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #mbox-cells = <2>; |
| |
| sram0: sram@445b1000 { |
| compatible = "mmio-sram"; |
| reg = <0x445b1000 0x400>; |
| ranges = <0x0 0x445b1000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| scmi_buf0: scmi-sram-section@0 { |
| compatible = "arm,scmi-shmem"; |
| reg = <0x0 0x80>; |
| }; |
| |
| scmi_buf1: scmi-sram-section@80 { |
| compatible = "arm,scmi-shmem"; |
| reg = <0x80 0x80>; |
| }; |
| }; |
| |
| }; |
| |
| mu3: mailbox@445d0000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x445d0000 0x10000>; |
| interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| mu4: mailbox@445f0000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x445f0000 0x10000>; |
| interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| mu6: mailbox@44630000 { |
| compatible = "fsl,imx95-mu"; |
| reg = <0x44630000 0x10000>; |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| mailbox@47320000 { |
| compatible = "fsl,imx95-mu-v2x"; |
| reg = <0x0 0x47320000 0x0 0x10000>; |
| interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| }; |
| |
| mailbox@47350000 { |
| compatible = "fsl,imx95-mu-v2x"; |
| reg = <0x0 0x47350000 0x0 0x10000>; |
| interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| }; |
| |
| /* GPIO1 is under exclusive control of System Manager */ |
| gpio1: gpio@47400000 { |
| compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; |
| reg = <0x0 0x47400000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk IMX95_CLK_M33>, |
| <&scmi_clk IMX95_CLK_M33>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&scmi_iomuxc 0 112 16>; |
| status = "disabled"; |
| }; |
| |
| elemu0: mailbox@47520000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47520000 0x0 0x10000>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| elemu1: mailbox@47530000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47530000 0x0 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| elemu2: mailbox@47540000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47540000 0x0 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| elemu3: mailbox@47550000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47550000 0x0 0x10000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| }; |
| |
| elemu4: mailbox@47560000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47560000 0x0 0x10000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| elemu5: mailbox@47570000 { |
| compatible = "fsl,imx95-mu-ele"; |
| reg = <0x0 0x47570000 0x0 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| aips4: bus@49000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x0 0x49000000 0x0 0x800000>; |
| ranges = <0x49000000 0x0 0x49000000 0x800000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| smmu: iommu@490d0000 { |
| compatible = "arm,smmu-v3"; |
| reg = <0x490d0000 0x100000>; |
| interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; |
| #iommu-cells = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pcie0: pcie@4c300000 { |
| compatible = "fsl,imx95-pcie"; |
| reg = <0 0x4c300000 0 0x10000>, |
| <0 0x60100000 0 0xfe00000>, |
| <0 0x4c360000 0 0x10000>, |
| <0 0x4c340000 0 0x2000>; |
| reg-names = "dbi", "config", "atu", "app"; |
| ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>, |
| <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| linux,pci-domain = <0>; |
| bus-range = <0x00 0xff>; |
| num-lanes = <1>; |
| num-viewport = <8>; |
| interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_HSIO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; |
| assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| assigned-clock-rates = <3600000000>, <100000000>, <10000000>; |
| assigned-clock-parents = <0>, <0>, |
| <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; |
| fsl,max-link-speed = <3>; |
| status = "disabled"; |
| }; |
| |
| pcie0_ep: pcie-ep@4c300000 { |
| compatible = "fsl,imx95-pcie-ep"; |
| reg = <0 0x4c300000 0 0x10000>, |
| <0 0x4c360000 0 0x1000>, |
| <0 0x4c320000 0 0x1000>, |
| <0 0x4c340000 0 0x2000>, |
| <0 0x4c370000 0 0x10000>, |
| <0x9 0 1 0>; |
| reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space"; |
| num-lanes = <1>; |
| interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dma"; |
| clocks = <&scmi_clk IMX95_CLK_HSIO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; |
| assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| assigned-clock-rates = <3600000000>, <100000000>, <10000000>; |
| assigned-clock-parents = <0>, <0>, |
| <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@4c380000 { |
| compatible = "fsl,imx95-pcie"; |
| reg = <0 0x4c380000 0 0x10000>, |
| <8 0x80100000 0 0xfe00000>, |
| <0 0x4c3e0000 0 0x10000>, |
| <0 0x4c3c0000 0 0x2000>; |
| reg-names = "dbi", "config", "atu", "app"; |
| ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>, |
| <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| linux,pci-domain = <1>; |
| bus-range = <0x00 0xff>; |
| num-lanes = <1>; |
| num-viewport = <8>; |
| interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_HSIO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; |
| assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| assigned-clock-rates = <3600000000>, <100000000>, <10000000>; |
| assigned-clock-parents = <0>, <0>, |
| <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; |
| fsl,max-link-speed = <3>; |
| status = "disabled"; |
| }; |
| |
| pcie1_ep: pcie-ep@4c380000 { |
| compatible = "fsl,imx95-pcie-ep"; |
| reg = <0 0x4c380000 0 0x10000>, |
| <0 0x4c3e0000 0 0x1000>, |
| <0 0x4c3a0000 0 0x1000>, |
| <0 0x4c3c0000 0 0x2000>, |
| <0 0x4c3f0000 0 0x10000>, |
| <0xa 0 1 0>; |
| reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space"; |
| num-lanes = <1>; |
| interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dma"; |
| clocks = <&scmi_clk IMX95_CLK_HSIO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; |
| assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, |
| <&scmi_clk IMX95_CLK_HSIOPLL>, |
| <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; |
| assigned-clock-rates = <3600000000>, <100000000>, <10000000>; |
| assigned-clock-parents = <0>, <0>, |
| <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; |
| status = "disabled"; |
| }; |
| |
| netcmix_blk_ctrl: syscon@4c810000 { |
| compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon"; |
| reg = <0x0 0x4c810000 0x0 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>; |
| assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>; |
| assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; |
| assigned-clock-rates = <133333333>; |
| power-domains = <&scmi_devpd IMX95_PD_NETC>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@4c880000 { |
| compatible = "fsl,imx95-sai"; |
| reg = <0x0 0x4c880000 0x0 0x10000>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI2>, <&dummy>, |
| <&dummy>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| power-domains = <&scmi_devpd IMX95_PD_NETC>; |
| dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ddr-pmu@4e090dc0 { |
| compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu"; |
| reg = <0x0 0x4e090dc0 0x0 0x200>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
