| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor |
| * |
| * Author: Christian Eggers <ceggers@arri.de> |
| * |
| * Copyright (c) 2020 ARRI Lighting |
| * |
| * Color light sensor with 16-bit channels for x, y, z and temperature); |
| * 7-bit I2C slave address 0x74 .. 0x77. |
| * |
| * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/pm.h> |
| #include <linux/units.h> |
| |
| #define AS73211_DRV_NAME "as73211" |
| |
| /* AS73211 configuration registers */ |
| #define AS73211_REG_OSR 0x0 |
| #define AS73211_REG_AGEN 0x2 |
| #define AS73211_REG_CREG1 0x6 |
| #define AS73211_REG_CREG2 0x7 |
| #define AS73211_REG_CREG3 0x8 |
| |
| /* AS73211 output register bank */ |
| #define AS73211_OUT_OSR_STATUS 0 |
| #define AS73211_OUT_TEMP 1 |
| #define AS73211_OUT_MRES1 2 |
| #define AS73211_OUT_MRES2 3 |
| #define AS73211_OUT_MRES3 4 |
| |
| #define AS73211_OSR_SS BIT(7) |
| #define AS73211_OSR_PD BIT(6) |
| #define AS73211_OSR_SW_RES BIT(3) |
| #define AS73211_OSR_DOS_MASK GENMASK(2, 0) |
| #define AS73211_OSR_DOS_CONFIG FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2) |
| #define AS73211_OSR_DOS_MEASURE FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3) |
| |
| #define AS73211_AGEN_DEVID_MASK GENMASK(7, 4) |
| #define AS73211_AGEN_DEVID(x) FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x)) |
| #define AS73211_AGEN_MUT_MASK GENMASK(3, 0) |
| #define AS73211_AGEN_MUT(x) FIELD_PREP(AS73211_AGEN_MUT_MASK, (x)) |
| |
| #define AS73211_CREG1_GAIN_MASK GENMASK(7, 4) |
| #define AS73211_CREG1_GAIN_1 11 |
| #define AS73211_CREG1_TIME_MASK GENMASK(3, 0) |
| |
| #define AS73211_CREG3_CCLK_MASK GENMASK(1, 0) |
| |
| #define AS73211_OSR_STATUS_OUTCONVOF BIT(15) |
| #define AS73211_OSR_STATUS_MRESOF BIT(14) |
| #define AS73211_OSR_STATUS_ADCOF BIT(13) |
| #define AS73211_OSR_STATUS_LDATA BIT(12) |
| #define AS73211_OSR_STATUS_NDATA BIT(11) |
| #define AS73211_OSR_STATUS_NOTREADY BIT(10) |
| |
| #define AS73211_SAMPLE_FREQ_BASE 1024000 |
| |
| #define AS73211_SAMPLE_TIME_NUM 15 |
| #define AS73211_SAMPLE_TIME_MAX_MS BIT(AS73211_SAMPLE_TIME_NUM - 1) |
| |
| /* Available sample frequencies are 1.024MHz multiplied by powers of two. */ |
| static const int as73211_samp_freq_avail[] = { |
| AS73211_SAMPLE_FREQ_BASE * 1, |
| AS73211_SAMPLE_FREQ_BASE * 2, |
| AS73211_SAMPLE_FREQ_BASE * 4, |
| AS73211_SAMPLE_FREQ_BASE * 8, |
| }; |
| |
| static const int as73211_hardwaregain_avail[] = { |
| 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, |
| }; |
| |
| /** |
| * struct as73211_data - Instance data for one AS73211 |
| * @client: I2C client. |
| * @osr: Cached Operational State Register. |
| * @creg1: Cached Configuration Register 1. |
| * @creg2: Cached Configuration Register 2. |
| * @creg3: Cached Configuration Register 3. |
| * @mutex: Keeps cached registers in sync with the device. |
| * @completion: Completion to wait for interrupt. |
| * @int_time_avail: Available integration times (depend on sampling frequency). |
| */ |
| struct as73211_data { |
| struct i2c_client *client; |
| u8 osr; |
| u8 creg1; |
| u8 creg2; |
| u8 creg3; |
| struct mutex mutex; |
| struct completion completion; |
| int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2]; |
| }; |
| |
| #define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \ |
| .type = IIO_INTENSITY, \ |
| .modified = 1, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \ |
| .info_mask_shared_by_type = \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ |
| BIT(IIO_CHAN_INFO_INT_TIME), \ |
| .info_mask_shared_by_type_available = \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ |
| BIT(IIO_CHAN_INFO_INT_TIME), \ |
| .channel2 = IIO_MOD_##_color, \ |
| .address = _addr, \ |
| .scan_index = _si, \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_LE, \ |
| }, \ |
| } |
| |
| #define AS73211_OFFSET_TEMP_INT (-66) |
| #define AS73211_OFFSET_TEMP_MICRO 900000 |
| #define AS73211_SCALE_TEMP_INT 0 |
| #define AS73211_SCALE_TEMP_MICRO 50000 |
| |
| #define AS73211_SCALE_X 277071108 /* nW/m^2 */ |
| #define AS73211_SCALE_Y 298384270 /* nW/m^2 */ |
| #define AS73211_SCALE_Z 160241927 /* nW/m^2 */ |
| |
| /* Channel order MUST match devices result register order */ |
| #define AS73211_SCAN_INDEX_TEMP 0 |
| #define AS73211_SCAN_INDEX_X 1 |
| #define AS73211_SCAN_INDEX_Y 2 |
| #define AS73211_SCAN_INDEX_Z 3 |
| #define AS73211_SCAN_INDEX_TS 4 |
| |
| #define AS73211_SCAN_MASK_COLOR ( \ |
| BIT(AS73211_SCAN_INDEX_X) | \ |
| BIT(AS73211_SCAN_INDEX_Y) | \ |
| BIT(AS73211_SCAN_INDEX_Z)) |
| |
| #define AS73211_SCAN_MASK_ALL ( \ |
| BIT(AS73211_SCAN_INDEX_TEMP) | \ |
| AS73211_SCAN_MASK_COLOR) |
| |
| static const struct iio_chan_spec as73211_channels[] = { |
| { |
| .type = IIO_TEMP, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .address = AS73211_OUT_TEMP, |
| .scan_index = AS73211_SCAN_INDEX_TEMP, |
| .scan_type = { |
| .sign = 'u', |
| .realbits = 16, |
| .storagebits = 16, |
| .endianness = IIO_LE, |
| } |
| }, |
| AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1), |
| AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2), |
| AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3), |
| IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS), |
| }; |
| |
| static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data) |
| { |
| /* |
| * Return integration time in units of 1024 clock cycles. Integration time |
| * in CREG1 is in powers of 2 (x 1024 cycles). |
| */ |
| return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1)); |
| } |
| |
| static unsigned int as73211_integration_time_us(struct as73211_data *data, |
| unsigned int integration_time_1024cyc) |
| { |
| /* |
| * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) |
| * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles) |
| * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC |
| * = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC |
| * = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000 |
| * In order to get rid of negative exponents, we extend the "fraction" |
| * by 2^3 (CREG3_CCLK,max = 3) |
| * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125 |
| */ |
| return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) * |
| integration_time_1024cyc * 125; |
| } |
| |
| static void as73211_integration_time_calc_avail(struct as73211_data *data) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(data->int_time_avail) / 2; i++) { |
| unsigned int time_us = as73211_integration_time_us(data, BIT(i)); |
| |
| data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC; |
| data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC; |
| } |
| } |
| |
| static unsigned int as73211_gain(struct as73211_data *data) |
| { |
| /* gain can be calculated from CREG1 as 2^(11 - CREG1_GAIN) */ |
| return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1)); |
| } |
| |
| /* must be called with as73211_data::mutex held. */ |
| static int as73211_req_data(struct as73211_data *data) |
| { |
| unsigned int time_us = as73211_integration_time_us(data, |
| as73211_integration_time_1024cyc(data)); |
| struct device *dev = &data->client->dev; |
| union i2c_smbus_data smbus_data; |
| u16 osr_status; |
| int ret; |
| |
| if (data->client->irq) |
| reinit_completion(&data->completion); |
| |
| /* |
| * During measurement, there should be no traffic on the i2c bus as the |
| * electrical noise would disturb the measurement process. |
| */ |
| i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT); |
| |
| data->osr &= ~AS73211_OSR_DOS_MASK; |
| data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS; |
| |
| smbus_data.byte = data->osr; |
| ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr, |
| data->client->flags, I2C_SMBUS_WRITE, |
| AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data); |
| if (ret < 0) { |
| i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT); |
| return ret; |
| } |
| |
| /* |
| * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional |
| * triggering of further measurements later. |
| */ |
| data->osr &= ~AS73211_OSR_SS; |
| |
| /* |
| * Add 33% extra margin for the timeout. fclk,min = fclk,typ - 27%. |
| */ |
| time_us += time_us / 3; |
| if (data->client->irq) { |
| ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us)); |
| if (!ret) { |
| dev_err(dev, "timeout waiting for READY IRQ\n"); |
| i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT); |
| return -ETIMEDOUT; |
| } |
| } else { |
| /* Wait integration time */ |
| usleep_range(time_us, 2 * time_us); |
| } |
| |
| i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT); |
| |
| ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| osr_status = ret; |
| if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) { |
| if (osr_status & AS73211_OSR_SS) { |
| dev_err(dev, "%s() Measurement has not stopped\n", __func__); |
| return -ETIME; |
| } |
| if (osr_status & AS73211_OSR_STATUS_NOTREADY) { |
| dev_err(dev, "%s() Data is not ready\n", __func__); |
| return -ENODATA; |
| } |
| if (!(osr_status & AS73211_OSR_STATUS_NDATA)) { |
| dev_err(dev, "%s() No new data available\n", __func__); |
| return -ENODATA; |
| } |
| if (osr_status & AS73211_OSR_STATUS_LDATA) { |
| dev_err(dev, "%s() Result buffer overrun\n", __func__); |
| return -ENOBUFS; |
| } |
| if (osr_status & AS73211_OSR_STATUS_ADCOF) { |
| dev_err(dev, "%s() ADC overflow\n", __func__); |
| return -EOVERFLOW; |
| } |
| if (osr_status & AS73211_OSR_STATUS_MRESOF) { |
| dev_err(dev, "%s() Measurement result overflow\n", __func__); |
| return -EOVERFLOW; |
| } |
| if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) { |
| dev_err(dev, "%s() Timer overflow\n", __func__); |
| return -EOVERFLOW; |
| } |
| dev_err(dev, "%s() Unexpected status value\n", __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct as73211_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: { |
| int ret; |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = as73211_req_data(data); |
| if (ret < 0) { |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| } |
| |
| ret = i2c_smbus_read_word_data(data->client, chan->address); |
| iio_device_release_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| return IIO_VAL_INT; |
| } |
| case IIO_CHAN_INFO_OFFSET: |
| *val = AS73211_OFFSET_TEMP_INT; |
| *val2 = AS73211_OFFSET_TEMP_MICRO; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_TEMP: |
| *val = AS73211_SCALE_TEMP_INT; |
| *val2 = AS73211_SCALE_TEMP_MICRO; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case IIO_INTENSITY: { |
| unsigned int scale; |
| |
| switch (chan->channel2) { |
| case IIO_MOD_X: |
| scale = AS73211_SCALE_X; |
| break; |
| case IIO_MOD_Y: |
| scale = AS73211_SCALE_Y; |
| break; |
| case IIO_MOD_Z: |
| scale = AS73211_SCALE_Z; |
| break; |
| default: |
| return -EINVAL; |
| } |
| scale /= as73211_gain(data); |
| scale /= as73211_integration_time_1024cyc(data); |
| *val = scale; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| }} |
| |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */ |
| *val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) * |
| AS73211_SAMPLE_FREQ_BASE; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *val = as73211_gain(data); |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_INT_TIME: { |
| unsigned int time_us; |
| |
| mutex_lock(&data->mutex); |
| time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data)); |
| mutex_unlock(&data->mutex); |
| *val = time_us / USEC_PER_SEC; |
| *val2 = time_us % USEC_PER_SEC; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| }} |
| } |
| |
| static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, long mask) |
| { |
| struct as73211_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *length = ARRAY_SIZE(as73211_samp_freq_avail); |
| *vals = as73211_samp_freq_avail; |
| *type = IIO_VAL_INT; |
| return IIO_AVAIL_LIST; |
| |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *length = ARRAY_SIZE(as73211_hardwaregain_avail); |
| *vals = as73211_hardwaregain_avail; |
| *type = IIO_VAL_INT; |
| return IIO_AVAIL_LIST; |
| |
| case IIO_CHAN_INFO_INT_TIME: |
| *length = ARRAY_SIZE(data->int_time_avail); |
| *vals = data->int_time_avail; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| return IIO_AVAIL_LIST; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int _as73211_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan __always_unused, |
| int val, int val2, long mask) |
| { |
| struct as73211_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: { |
| int reg_bits, freq_kHz = val / HZ_PER_KHZ; /* 1024, 2048, ... */ |
| |
| /* val must be 1024 * 2^x */ |
| if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val || |
| !is_power_of_2(freq_kHz) || val2) |
| return -EINVAL; |
| |
| /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */ |
| reg_bits = ilog2(freq_kHz) - 10; |
| if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits)) |
| return -EINVAL; |
| |
| data->creg3 &= ~AS73211_CREG3_CCLK_MASK; |
| data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits); |
| as73211_integration_time_calc_avail(data); |
| |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| case IIO_CHAN_INFO_HARDWAREGAIN: { |
| unsigned int reg_bits; |
| |
| if (val < 0 || !is_power_of_2(val) || val2) |
| return -EINVAL; |
| |
| /* gain can be calculated from CREG1 as 2^(11 - CREG1_GAIN) */ |
| reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val); |
| if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits)) |
| return -EINVAL; |
| |
| data->creg1 &= ~AS73211_CREG1_GAIN_MASK; |
| data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits); |
| |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| case IIO_CHAN_INFO_INT_TIME: { |
| int val_us = val * USEC_PER_SEC + val2; |
| int time_ms; |
| int reg_bits; |
| |
| /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */ |
| int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)); |
| |
| /* |
| * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ |
| * = time_us * f_samp_1_024mhz / 1000 |
| */ |
| time_ms = (val_us * f_samp_1_024mhz) / 1000; /* 1 ms, 2 ms, ... (power of two) */ |
| if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS) |
| return -EINVAL; |
| |
| reg_bits = ilog2(time_ms); |
| if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits)) |
| return -EINVAL; /* not possible due to previous tests */ |
| |
| data->creg1 &= ~AS73211_CREG1_TIME_MASK; |
| data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits); |
| |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| |
| default: |
| return -EINVAL; |
| }} |
| } |
| |
| static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct as73211_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret < 0) |
| goto error_unlock; |
| |
| /* Need to switch to config mode ... */ |
| if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) { |
| data->osr &= ~AS73211_OSR_DOS_MASK; |
| data->osr |= AS73211_OSR_DOS_CONFIG; |
| |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr); |
| if (ret < 0) |
| goto error_release; |
| } |
| |
| ret = _as73211_write_raw(indio_dev, chan, val, val2, mask); |
| |
| error_release: |
| iio_device_release_direct_mode(indio_dev); |
| error_unlock: |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv) |
| { |
| struct as73211_data *data = iio_priv(priv); |
| |
| complete(&data->completion); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct as73211_data *data = iio_priv(indio_dev); |
| struct { |
| __le16 chan[4]; |
| s64 ts __aligned(8); |
| } scan; |
| int data_result, ret; |
| |
| mutex_lock(&data->mutex); |
| |
| data_result = as73211_req_data(data); |
| if (data_result < 0 && data_result != -EOVERFLOW) |
| goto done; /* don't push any data for errors other than EOVERFLOW */ |
| |
| if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) { |
| /* Optimization for reading all (color + temperature) channels */ |
| u8 addr = as73211_channels[0].address; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = data->client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = &addr, |
| }, |
| { |
| .addr = data->client->addr, |
| .flags = I2C_M_RD, |
| .len = sizeof(scan.chan), |
| .buf = (u8 *)&scan.chan, |
| }, |
| }; |
| |
| ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret < 0) |
| goto done; |
| } else { |
| /* Optimization for reading only color channels */ |
| |
| /* AS73211 starts reading at address 2 */ |
| ret = i2c_master_recv(data->client, |
| (char *)&scan.chan[1], 3 * sizeof(scan.chan[1])); |
| if (ret < 0) |
| goto done; |
| } |
| |
| if (data_result) { |
| /* |
| * Saturate all channels (in case of overflows). Temperature channel |
| * is not affected by overflows. |
| */ |
| scan.chan[1] = cpu_to_le16(U16_MAX); |
| scan.chan[2] = cpu_to_le16(U16_MAX); |
| scan.chan[3] = cpu_to_le16(U16_MAX); |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev)); |
| |
| done: |
| mutex_unlock(&data->mutex); |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct iio_info as73211_info = { |
| .read_raw = as73211_read_raw, |
| .read_avail = as73211_read_avail, |
| .write_raw = as73211_write_raw, |
| }; |
| |
| static int as73211_power(struct iio_dev *indio_dev, bool state) |
| { |
| struct as73211_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| |
| if (state) |
| data->osr &= ~AS73211_OSR_PD; |
| else |
| data->osr |= AS73211_OSR_PD; |
| |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr); |
| |
| mutex_unlock(&data->mutex); |
| |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void as73211_power_disable(void *data) |
| { |
| struct iio_dev *indio_dev = data; |
| |
| as73211_power(indio_dev, false); |
| } |
| |
| static int as73211_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct as73211_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| |
| mutex_init(&data->mutex); |
| init_completion(&data->completion); |
| |
| indio_dev->info = &as73211_info; |
| indio_dev->name = AS73211_DRV_NAME; |
| indio_dev->channels = as73211_channels; |
| indio_dev->num_channels = ARRAY_SIZE(as73211_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR); |
| if (ret < 0) |
| return ret; |
| data->osr = ret; |
| |
| /* reset device */ |
| data->osr |= AS73211_OSR_SW_RES; |
| ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR); |
| if (ret < 0) |
| return ret; |
| data->osr = ret; |
| |
| /* |
| * Reading AGEN is only possible after reset (AGEN is not available if |
| * device is in measurement mode). |
| */ |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN); |
| if (ret < 0) |
| return ret; |
| |
| /* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */ |
| if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) || |
| (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1); |
| if (ret < 0) |
| return ret; |
| data->creg1 = ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2); |
| if (ret < 0) |
| return ret; |
| data->creg2 = ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3); |
| if (ret < 0) |
| return ret; |
| data->creg3 = ret; |
| as73211_integration_time_calc_avail(data); |
| |
| ret = as73211_power(indio_dev, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL); |
| if (ret) |
| return ret; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, |
| as73211_ready_handler, |
| IRQF_ONESHOT, |
| client->name, indio_dev); |
| if (ret) |
| return ret; |
| } |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static int __maybe_unused as73211_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| |
| return as73211_power(indio_dev, false); |
| } |
| |
| static int __maybe_unused as73211_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| |
| return as73211_power(indio_dev, true); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume); |
| |
| static const struct of_device_id as73211_of_match[] = { |
| { .compatible = "ams,as73211" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, as73211_of_match); |
| |
| static const struct i2c_device_id as73211_id[] = { |
| { "as73211", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, as73211_id); |
| |
| static struct i2c_driver as73211_driver = { |
| .driver = { |
| .name = AS73211_DRV_NAME, |
| .of_match_table = as73211_of_match, |
| .pm = &as73211_pm_ops, |
| }, |
| .probe_new = as73211_probe, |
| .id_table = as73211_id, |
| }; |
| module_i2c_driver(as73211_driver); |
| |
| MODULE_AUTHOR("Christian Eggers <ceggers@arri.de>"); |
| MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver"); |
| MODULE_LICENSE("GPL"); |