blob: 49c08f07c96901193efcd960c5d9634c78d82924 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* USB FTDI SIO driver
*
* Copyright (C) 2009 - 2013
* Johan Hovold (jhovold@gmail.com)
* Copyright (C) 1999 - 2001
* Greg Kroah-Hartman (greg@kroah.com)
* Bill Ryder (bryder@sgi.com)
* Copyright (C) 2002
* Kuba Ober (kuba@mareimbrium.org)
*
* See Documentation/usb/usb-serial.rst for more information on using this
* driver
*
* See http://ftdi-usb-sio.sourceforge.net for up to date testing info
* and extra documentation
*
* Change entries from 2004 and earlier can be found in versions of this
* file in kernel versions prior to the 2.6.24 release.
*
*/
/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
/* Thanx to FTDI for so kindly providing details of the protocol required */
/* to talk to the device */
/* Thanx to gkh and the rest of the usb dev group for all code I have
assimilated :-) */
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include <linux/gpio/driver.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
#include "ftdi_sio_ids.h"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
struct ftdi_private {
enum ftdi_chip_type chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
int custom_divisor; /* custom_divisor kludge, this is for
baud_base (different from what goes to the
chip!) */
u16 last_set_data_value; /* the last data state set - needed for doing
* a break
*/
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
char prev_status; /* Used for TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
unsigned int latency; /* latency setting in use */
unsigned short max_packet_size;
struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
#ifdef CONFIG_GPIOLIB
struct gpio_chip gc;
struct mutex gpio_lock; /* protects GPIO state */
bool gpio_registered; /* is the gpiochip in kernel registered */
bool gpio_used; /* true if the user requested a gpio */
u8 gpio_altfunc; /* which pins are in gpio mode */
u8 gpio_output; /* pin directions cache */
u8 gpio_value; /* pin value for outputs */
#endif
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
int (*probe)(struct usb_serial *);
/* Special settings for probed ports. */
void (*port_probe)(struct ftdi_private *);
};
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static int ftdi_stmclite_probe(struct usb_serial *serial);
static int ftdi_8u2232c_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
static const struct ftdi_sio_quirk ftdi_jtag_quirk = {
.probe = ftdi_jtag_probe,
};
static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
.probe = ftdi_NDI_device_setup,
};
static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
};
static const struct ftdi_sio_quirk ftdi_stmclite_quirk = {
.probe = ftdi_stmclite_probe,
};
static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
.probe = ftdi_8u2232c_probe,
};
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
* o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
* o 230400 at 12MHz
* so .. 8U232AM's baudrate setting codes are different
* - it has a two byte status code.
* - it returns characters every 16ms (the FTDI does it every 40ms)
*
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
* combinations in both tables.
* FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
* but I don't know if those ever went into mass production. [Ian Abbott]
*/
/*
* Device ID not listed? Test it using
* /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
*/
static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
{ USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2WI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX3_PID) },
/*
* ELV devices:
*/
{ USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
{ USB_DEVICE(TESTO_VID, TESTO_1_PID) },
{ USB_DEVICE(TESTO_VID, TESTO_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
/* Papouch devices based on FTDI chip */
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
USB_CLASS_VENDOR_SPEC,
USB_SUBCLASS_VENDOR_SPEC, 0x00) },
{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
{ USB_DEVICE(PI_VID, PI_C866_PID) },
{ USB_DEVICE(PI_VID, PI_C663_PID) },
{ USB_DEVICE(PI_VID, PI_C725_PID) },
{ USB_DEVICE(PI_VID, PI_E517_PID) },
{ USB_DEVICE(PI_VID, PI_C863_PID) },
{ USB_DEVICE(PI_VID, PI_E861_PID) },
{ USB_DEVICE(PI_VID, PI_C867_PID) },
{ USB_DEVICE(PI_VID, PI_E609_PID) },
{ USB_DEVICE(PI_VID, PI_E709_PID) },
{ USB_DEVICE(PI_VID, PI_100F_PID) },
{ USB_DEVICE(PI_VID, PI_1011_PID) },
{ USB_DEVICE(PI_VID, PI_1012_PID) },
{ USB_DEVICE(PI_VID, PI_1013_PID) },
{ USB_DEVICE(PI_VID, PI_1014_PID) },
{ USB_DEVICE(PI_VID, PI_1015_PID) },
{ USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
/* Cressi Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) },
/* Brainboxes Devices */
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_159_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_235_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_320_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
/* ekey Devices */
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
/* Infineon Devices */
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
/* GE Healthcare devices */
{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
/* Active Research (Actisense) devices */
{ USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
/* ICP DAS I-756xU devices */
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
/* EZPrototypes devices */
{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
/* Sienna devices */
{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
/* IDS GmbH devices */
{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
/* FreeCalypso USB adapters */
{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table_combined);
static const char *ftdi_chip_name[] = {
[SIO] = "SIO", /* the serial part of FT8U100AX */
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
[FT2232H] = "FT2232H",
[FT4232H] = "FT4232H",
[FT232H] = "FT232H",
[FTX] = "FT-X"
};
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* End TIOCMIWAIT */
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static void ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static void ftdi_process_read_urb(struct urb *urb);
static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
void *dest, size_t size);
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int ftdi_tiocmget(struct tty_struct *tty);
static int ftdi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
static int set_serial_info(struct tty_struct *tty,
struct serial_struct *ss);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static bool ftdi_tx_empty(struct usb_serial_port *port);
static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static u32 ftdi_232bm_baud_to_divisor(int baud);
static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
static u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
.owner = THIS_MODULE,
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
.id_table = id_table_combined,
.num_ports = 1,
.bulk_in_size = 512,
.bulk_out_size = 256,
.probe = ftdi_sio_probe,
.port_probe = ftdi_sio_port_probe,
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.dtr_rts = ftdi_dtr_rts,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.process_read_urb = ftdi_process_read_urb,
.prepare_write_buffer = ftdi_prepare_write_buffer,
.tiocmget = ftdi_tiocmget,
.tiocmset = ftdi_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.ioctl = ftdi_ioctl,
.get_serial = get_serial_info,
.set_serial = set_serial_info,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
&ftdi_sio_device, NULL
};
#define WDR_TIMEOUT 5000 /* default urb timeout */
#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
/*
* ***************************************************************************
* Utility functions
* ***************************************************************************
*/
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
unsigned short int divisor;
/* divisor shifted 3 bits to the left */
int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
if ((divisor3 & 0x7) == 7)
divisor3++; /* round x.7/8 up to x+1 */
divisor = divisor3 >> 3;
divisor3 &= 0x7;
if (divisor3 == 1)
divisor |= 0xc000; /* +0.125 */
else if (divisor3 >= 4)
divisor |= 0x4000; /* +0.5 */
else if (divisor3 != 0)
divisor |= 0x8000; /* +0.25 */
else if (divisor == 1)
divisor = 0; /* special case for maximum baud rate */
return divisor;
}
static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
return ftdi_232am_baud_base_to_divisor(baud, 48000000);
}
static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
u32 divisor;
/* divisor shifted 3 bits to the left */
int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1) /* 1.0 */
divisor = 0;
else if (divisor == 0x4001) /* 1.5 */
divisor = 1;
return divisor;
}
static u32 ftdi_232bm_baud_to_divisor(int baud)
{
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
u32 divisor;
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1) /* 1.0 */
divisor = 0;
else if (divisor == 0x4001) /* 1.5 */
divisor = 1;
/*
* Set this bit to turn off a divide by 2.5 on baud rate generator
* This enables baud rates up to 12Mbaud but cannot reach below 1200
* baud with this bit set
*/
divisor |= 0x00020000;
return divisor;
}
static u32 ftdi_2232h_baud_to_divisor(int baud)
{
return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
}
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
static int update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
unsigned value;
int rv;
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__);
return 0; /* no change */
}
clear &= ~set; /* 'set' takes precedence over 'clear' */
value = 0;
if (clear & TIOCM_DTR)
value |= FTDI_SIO_SET_DTR_LOW;
if (clear & TIOCM_RTS)
value |= FTDI_SIO_SET_RTS_LOW;
if (set & TIOCM_DTR)
value |= FTDI_SIO_SET_DTR_HIGH;
if (set & TIOCM_RTS)
value |= FTDI_SIO_SET_RTS_HIGH;
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
value, priv->interface,
NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n",
__func__,
(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
rv = usb_translate_errors(rv);
} else {
dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__,
(set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
/* FIXME: locking on last_dtr_rts */
priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
}
return rv;
}
static u32 get_ftdi_divisor(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
u32 div_value = 0;
int div_okay = 1;
int baud;
baud = tty_get_baud_rate(tty);
dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud);
/*
* Observe deprecated async-compatible custom_divisor hack, update
* baudrate if needed.
*/
if (baud == 38400 &&
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
baud = priv->baud_base / priv->custom_divisor;
dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n",
__func__, priv->custom_divisor, baud);
}
if (!baud)
baud = 9600;
switch (priv->chip_type) {
case SIO: /* SIO chip */
switch (baud) {
case 300: div_value = ftdi_sio_b300; break;
case 600: div_value = ftdi_sio_b600; break;
case 1200: div_value = ftdi_sio_b1200; break;
case 2400: div_value = ftdi_sio_b2400; break;
case 4800: div_value = ftdi_sio_b4800; break;
case 9600: div_value = ftdi_sio_b9600; break;
case 19200: div_value = ftdi_sio_b19200; break;
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
} /* baud */
if (div_value == 0) {
dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
__func__, baud);
div_value = ftdi_sio_b9600;
baud = 9600;
div_okay = 0;
}
break;
case FT8U232AM: /* 8U232AM chip */
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
baud = 9600;
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
}
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
case FT232RL: /* FT232RL chip */
case FTX: /* FT-X series */
if (baud <= 3000000) {
u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
if (((product_id == FTDI_NDI_HUC_PID) ||
(product_id == FTDI_NDI_SPECTRA_SCU_PID) ||
(product_id == FTDI_NDI_FUTURE_2_PID) ||
(product_id == FTDI_NDI_FUTURE_3_PID) ||
(product_id == FTDI_NDI_AURORA_SCU_PID)) &&
(baud == 19200)) {
baud = 1200000;
}
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
}
break;
case FT2232H: /* FT2232H chip */
case FT4232H: /* FT4232H chip */
case FT232H: /* FT232H chip */
if ((baud <= 12000000) && (baud >= 1200)) {
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
}
break;
} /* priv->chip_type */
if (div_okay) {
dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n",
__func__, baud, (unsigned long)div_value,
ftdi_chip_name[priv->chip_type]);
}
tty_encode_baud_rate(tty, baud, baud);
return div_value;
}
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
u16 value;
u16 index;
u32 index_value;
int rv;
index_value = get_ftdi_divisor(tty, port);
value = (u16)index_value;
index = (u16)(index_value >> 16);
if (priv->chip_type == FT2232C || priv->chip_type == FT2232H ||
priv->chip_type == FT4232H || priv->chip_type == FT232H ||
priv->chip_type == FTX) {
/* Probably the BM type needs the MSB of the encoded fractional
* divider also moved like for the chips above. Any infos? */
index = (u16)((index << 8) | priv->interface);
}
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
value, index,
NULL, 0, WDR_SHORT_TIMEOUT);
return rv;
}
static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
int rv;
int l = priv->latency;
if (priv->chip_type == SIO || priv->chip_type == FT8U232AM)
return -EINVAL;
if (priv->flags & ASYNC_LOW_LATENCY)
l = 1;
dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
l, priv->interface,
NULL, 0, WDR_TIMEOUT);
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
}
static int _read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
u8 buf;
int rv;
rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0,
priv->interface, &buf, 1, WDR_TIMEOUT,
GFP_KERNEL);
if (rv == 0)
rv = buf;
return rv;
}
static int read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
int rv;
if (priv->chip_type == SIO || priv->chip_type == FT8U232AM)
return -EINVAL;
rv = _read_latency_timer(port);
if (rv < 0) {
dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
return rv;
}
priv->latency = rv;
return 0;
}
static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
ss->flags = priv->flags;
ss->baud_base = priv->baud_base;
ss->custom_divisor = priv->custom_divisor;
}
static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int old_flags, old_divisor;
mutex_lock(&priv->cfg_lock);
if (!capable(CAP_SYS_ADMIN)) {
if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) {
mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
}
old_flags = priv->flags;
old_divisor = priv->custom_divisor;
priv->flags = ss->flags & ASYNC_FLAGS;
priv->custom_divisor = ss->custom_divisor;
write_latency_timer(port);
if ((priv->flags ^ old_flags) & ASYNC_SPD_MASK ||
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
priv->custom_divisor != old_divisor)) {
/* warn about deprecation unless clearing */
if (priv->flags & ASYNC_SPD_MASK)
dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n");
change_speed(tty, port);
}
mutex_unlock(&priv->cfg_lock);
return 0;
}
static int get_lsr_info(struct usb_serial_port *port,
unsigned int __user *retinfo)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned int result = 0;
if (priv->transmit_empty)
result = TIOCSER_TEMT;
if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
return -EFAULT;
return 0;
}
/* Determine type of FTDI chip based on USB config and descriptor. */
static void ftdi_determine_type(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
unsigned version;
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
priv->baud_base = 48000000 / 2;
version = le16_to_cpu(udev->descriptor.bcdDevice);
interfaces = udev->actconfig->desc.bNumInterfaces;
dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__,
version, interfaces);
if (interfaces > 1) {
struct usb_interface *intf = serial->interface;
int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
/* Multiple interfaces.*/
if (version == 0x0800) {
priv->chip_type = FT4232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else if (version == 0x0700) {
priv->chip_type = FT2232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else
priv->chip_type = FT2232C;
/* Determine interface code. */
if (ifnum == 0)
priv->interface = INTERFACE_A;
else if (ifnum == 1)
priv->interface = INTERFACE_B;
else if (ifnum == 2)
priv->interface = INTERFACE_C;
else if (ifnum == 3)
priv->interface = INTERFACE_D;
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
dev_dbg(&port->dev,
"%s: something fishy - bcdDevice too low for multi-interface device\n",
__func__);
}
} else if (version < 0x200) {
/* Old device. Assume it's the original SIO. */
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
} else if (version < 0x400) {
/* Assume it's an FT8U232AM (or FT8U245AM) */
priv->chip_type = FT8U232AM;
/*
* It might be a BM type because of the iSerialNumber bug.
* If iSerialNumber==0 and the latency timer is readable,
* assume it is BM type.
*/
if (udev->descriptor.iSerialNumber == 0 &&
_read_latency_timer(port) >= 0) {
dev_dbg(&port->dev,
"%s: has latency timer so not an AM type\n",
__func__);
priv->chip_type = FT232BM;
}
} else if (version < 0x600) {
/* Assume it's an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
} else if (version < 0x900) {
/* Assume it's an FT232RL */
priv->chip_type = FT232RL;
} else if (version < 0x1000) {
/* Assume it's an FT232H */
priv->chip_type = FT232H;
} else {
/* Assume it's an FT-X series device */
priv->chip_type = FTX;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
}
/*
* Determine the maximum packet size for the device. This depends on the chip
* type and the USB host capabilities. The value should be obtained from the
* device descriptor as the chip will use the appropriate values for the host.
*/
static void ftdi_set_max_packet_size(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_interface *interface = port->serial->interface;
struct usb_endpoint_descriptor *ep_desc;
unsigned num_endpoints;
unsigned i;
num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
if (!num_endpoints)
return;
/*
* NOTE: Some customers have programmed FT232R/FT245R devices
* with an endpoint size of 0 - not good. In this case, we
* want to override the endpoint descriptor setting and use a
* value of 64 for wMaxPacketSize.
*/
for (i = 0; i < num_endpoints; i++) {
ep_desc = &interface->cur_altsetting->endpoint[i].desc;
if (!ep_desc->wMaxPacketSize) {
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
dev_warn(&port->dev, "Overriding wMaxPacketSize on endpoint %d\n",
usb_endpoint_num(ep_desc));
}
}
/* Set max packet size based on last descriptor. */
priv->max_packet_size = usb_endpoint_maxp(ep_desc);
}
/*
* ***************************************************************************
* Sysfs Attribute
* ***************************************************************************
*/
static ssize_t latency_timer_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
if (priv->flags & ASYNC_LOW_LATENCY)
return sprintf(buf, "1\n");
else
return sprintf(buf, "%i\n", priv->latency);
}
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t latency_timer_store(struct device *dev,
struct device_attribute *attr,
const char *valbuf, size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
u8 v;
int rv;
if (kstrtou8(valbuf, 10, &v))
return -EINVAL;
priv->latency = v;
rv = write_latency_timer(port);
if (rv < 0)
return -EIO;
return count;
}
static DEVICE_ATTR_RW(latency_timer);
/* Write an event character directly to the FTDI register. The ASCII
value is in the low 8 bits, with the enable bit in the 9th bit. */
static ssize_t event_char_store(struct device *dev,
struct device_attribute *attr, const char *valbuf, size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
unsigned int v;
int rv;
if (kstrtouint(valbuf, 0, &v) || v >= 0x200)
return -EINVAL;
dev_dbg(&port->dev, "%s: setting event char = 0x%03x\n", __func__, v);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
v, priv->interface,
NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dev_dbg(&port->dev, "Unable to write event character: %i\n", rv);
return -EIO;
}
return count;
}
static DEVICE_ATTR_WO(event_char);
static int create_sysfs_attrs(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]);
retval = device_create_file(&port->dev, &dev_attr_event_char);
if ((!retval) &&
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
priv->chip_type == FT4232H ||
priv->chip_type == FT232H ||
priv->chip_type == FTX)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
}
return retval;
}
static void remove_sysfs_attrs(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
priv->chip_type == FT4232H ||
priv->chip_type == FT232H ||
priv->chip_type == FTX) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
}
#ifdef CONFIG_GPIOLIB
static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
int result;
u16 val;
result = usb_autopm_get_interface(serial->interface);
if (result)
return result;
val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
FTDI_SIO_SET_BITMODE_REQUEST,
FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
priv->interface, NULL, 0, WDR_TIMEOUT);
if (result < 0) {
dev_err(&serial->interface->dev,
"bitmode request failed for value 0x%04x: %d\n",
val, result);
}
usb_autopm_put_interface(serial->interface);
return result;
}
static int ftdi_set_cbus_pins(struct usb_serial_port *port)
{
return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS);
}
static int ftdi_exit_cbus_mode(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
priv->gpio_output = 0;
priv->gpio_value = 0;
return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET);
}
static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
mutex_lock(&priv->gpio_lock);
if (!priv->gpio_used) {
/* Set default pin states, as we cannot get them from device */
priv->gpio_output = 0x00;
priv->gpio_value = 0x00;
result = ftdi_set_cbus_pins(port);
if (result) {
mutex_unlock(&priv->gpio_lock);
return result;
}
priv->gpio_used = true;
}
mutex_unlock(&priv->gpio_lock);
return 0;
}
static int ftdi_read_cbus_pins(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
u8 buf;
int result;
result = usb_autopm_get_interface(serial->interface);
if (result)
return result;
result = usb_control_msg_recv(serial->dev, 0,
FTDI_SIO_READ_PINS_REQUEST,
FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
priv->interface, &buf, 1, WDR_TIMEOUT,
GFP_KERNEL);
if (result == 0)
result = buf;
usb_autopm_put_interface(serial->interface);
return result;
}
static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
int result;
result = ftdi_read_cbus_pins(port);
if (result < 0)
return result;
return !!(result & BIT(gpio));
}
static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
mutex_lock(&priv->gpio_lock);
if (value)
priv->gpio_value |= BIT(gpio);
else
priv->gpio_value &= ~BIT(gpio);
ftdi_set_cbus_pins(port);
mutex_unlock(&priv->gpio_lock);
}
static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
int result;
result = ftdi_read_cbus_pins(port);
if (result < 0)
return result;
*bits = result & *mask;
return 0;
}
static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
mutex_lock(&priv->gpio_lock);
priv->gpio_value &= ~(*mask);
priv->gpio_value |= *bits & *mask;
ftdi_set_cbus_pins(port);
mutex_unlock(&priv->gpio_lock);
}
static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
return !(priv->gpio_output & BIT(gpio));
}
static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
mutex_lock(&priv->gpio_lock);
priv->gpio_output &= ~BIT(gpio);
result = ftdi_set_cbus_pins(port);
mutex_unlock(&priv->gpio_lock);
return result;
}
static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
int value)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
mutex_lock(&priv->gpio_lock);
priv->gpio_output |= BIT(gpio);
if (value)
priv->gpio_value |= BIT(gpio);
else
priv->gpio_value &= ~BIT(gpio);
result = ftdi_set_cbus_pins(port);
mutex_unlock(&priv->gpio_lock);
return result;
}
static int ftdi_gpio_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct usb_serial_port *port = gpiochip_get_data(gc);
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long map = priv->gpio_altfunc;
bitmap_complement(valid_mask, &map, ngpios);
if (bitmap_empty(valid_mask, ngpios))
dev_dbg(&port->dev, "no CBUS pin configured for GPIO\n");
else
dev_dbg(&port->dev, "CBUS%*pbl configured for GPIO\n", ngpios,
valid_mask);
return 0;
}
static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
u16 nbytes)
{
int read = 0;
if (addr % 2 != 0)
return -EINVAL;
if (nbytes % 2 != 0)
return -EINVAL;
/* Read EEPROM two bytes at a time */
while (read < nbytes) {
int rv;
rv = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
FTDI_SIO_READ_EEPROM_REQUEST,
FTDI_SIO_READ_EEPROM_REQUEST_TYPE,
0, (addr + read) / 2, dst + read, 2,
WDR_TIMEOUT);
if (rv < 2) {
if (rv >= 0)
return -EIO;
else
return rv;
}
read += rv;
}
return 0;
}
static int ftdi_gpio_init_ft232h(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
u16 cbus_config;
u8 *buf;
int ret;
int i;
buf = kmalloc(4, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4);
if (ret < 0)
goto out_free;
/*
* FT232H CBUS Memory Map
*
* 0x1a: X- (upper nibble -> AC5)
* 0x1b: -X (lower nibble -> AC6)
* 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8)
*/
cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4;
priv->gc.ngpio = 4;
priv->gpio_altfunc = 0xff;
for (i = 0; i < priv->gc.ngpio; ++i) {
if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO)
priv->gpio_altfunc &= ~BIT(i);
cbus_config >>= 4;
}
out_free:
kfree(buf);
return ret;
}
static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
u16 cbus_config;
u8 *buf;
int ret;
int i;
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2);
if (ret < 0)
goto out_free;
cbus_config = le16_to_cpup((__le16 *)buf);
dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config);
priv->gc.ngpio = 4;
priv->gpio_altfunc = 0xff;
for (i = 0; i < priv->gc.ngpio; ++i) {
if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO)
priv->gpio_altfunc &= ~BIT(i);
cbus_config >>= 4;
}
out_free:
kfree(buf);
return ret;
}
static int ftdi_gpio_init_ftx(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
const u16 cbus_cfg_addr = 0x1a;
const u16 cbus_cfg_size = 4;
u8 *cbus_cfg_buf;
int result;
u8 i;
cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL);
if (!cbus_cfg_buf)
return -ENOMEM;
result = ftdi_read_eeprom(serial, cbus_cfg_buf,
cbus_cfg_addr, cbus_cfg_size);
if (result < 0)
goto out_free;
/* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */
priv->gc.ngpio = 4;
/* Determine which pins are configured for CBUS bitbanging */
priv->gpio_altfunc = 0xff;
for (i = 0; i < priv->gc.ngpio; ++i) {
if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO)
priv->gpio_altfunc &= ~BIT(i);
}
out_free:
kfree(cbus_cfg_buf);
return result;
}
static int ftdi_gpio_init(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
int result;
switch (priv->chip_type) {
case FT232H:
result = ftdi_gpio_init_ft232h(port);
break;
case FT232RL:
result = ftdi_gpio_init_ft232r(port);
break;
case FTX:
result = ftdi_gpio_init_ftx(port);
break;
default:
return 0;
}
if (result < 0)
return result;
mutex_init(&priv->gpio_lock);
priv->gc.label = "ftdi-cbus";
priv->gc.request = ftdi_gpio_request;
priv->gc.get_direction = ftdi_gpio_direction_get;
priv->gc.direction_input = ftdi_gpio_direction_input;
priv->gc.direction_output = ftdi_gpio_direction_output;
priv->gc.init_valid_mask = ftdi_gpio_init_valid_mask;
priv->gc.get = ftdi_gpio_get;
priv->gc.set = ftdi_gpio_set;
priv->gc.get_multiple = ftdi_gpio_get_multiple;
priv->gc.set_multiple = ftdi_gpio_set_multiple;
priv->gc.owner = THIS_MODULE;
priv->gc.parent = &serial->interface->dev;
priv->gc.base = -1;
priv->gc.can_sleep = true;
result = gpiochip_add_data(&priv->gc, port);
if (!result)
priv->gpio_registered = true;
return result;
}
static void ftdi_gpio_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
if (priv->gpio_registered) {
gpiochip_remove(&priv->gc);
priv->gpio_registered = false;
}
if (priv->gpio_used) {
/* Exiting CBUS-mode does not reset pin states. */
ftdi_exit_cbus_mode(port);
priv->gpio_used = false;
}
}
#else
static int ftdi_gpio_init(struct usb_serial_port *port)
{
return 0;
}
static void ftdi_gpio_remove(struct usb_serial_port *port) { }
#endif /* CONFIG_GPIOLIB */
/*
* ***************************************************************************
* FTDI driver specific functions
* ***************************************************************************
*/
/* Probe function to check for special devices */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
const struct ftdi_sio_quirk *quirk =
(struct ftdi_sio_quirk *)id->driver_info;
if (quirk && quirk->probe) {
int ret = quirk->probe(serial);
if (ret != 0)
return ret;
}
usb_set_serial_data(serial, (void *)id->driver_info);
return 0;
}
static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
struct ftdi_private *priv;
const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
int result;
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
mutex_init(&priv->cfg_lock);
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
ftdi_set_max_packet_size(port);
if (read_latency_timer(port) < 0)
priv->latency = 16;
write_latency_timer(port);
create_sysfs_attrs(port);
result = ftdi_gpio_init(port);
if (result < 0) {
dev_err(&port->serial->interface->dev,
"GPIO initialisation failed: %d\n",
result);
}
return 0;
}
/* Setup for the USB-UIRT device, which requires hardwired
* baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
{
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = 38400;
}
/* Setup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
{
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = 38400;
priv->force_rtscts = 1;
}
/*
* Module parameter to control latency timer for NDI FTDI-based USB devices.
* If this value is not set in /etc/modprobe.d/ its value will be set
* to 1ms.
*/
static int ndi_latency_timer = 1;
/* Setup for the NDI FTDI-based USB devices, which requires hardwired
* baudrate (19200 gets mapped to 1200000).
*
* Called from usbserial:serial_probe.
*/
static int ftdi_NDI_device_setup(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
if (latency == 0)
latency = 1;
if (latency > 99)
latency = 99;
dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency);
dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency);
/* FIXME: errors are not returned */
usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
latency, 0, NULL, 0, WDR_TIMEOUT);
return 0;
}
/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
*/
static int ftdi_jtag_probe(struct usb_serial *serial)
{
struct usb_interface *intf = serial->interface;
int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
if (ifnum == 0) {
dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
return 0;
}
static int ftdi_8u2232c_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems"))
return ftdi_jtag_probe(serial);
if (udev->product &&
(!strcmp(udev->product, "Arrow USB Blaster") ||
!strcmp(udev->product, "BeagleBone/XDS100V2") ||
!strcmp(udev->product, "SNAP Connect E10")))
return ftdi_jtag_probe(serial);
return 0;
}
/*
* First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
* ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
* can be accessed from userspace.
* The next two ports are enabled as UARTs by default, where port 2 is
* a conventional RS-232 UART.
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
struct usb_interface *intf = serial->interface;
int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
if (ifnum < 2) {
dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
return 0;
}
static void ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
ftdi_gpio_remove(port);
remove_sysfs_attrs(port);
kfree(priv);
}
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
priv->interface, NULL, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
if (tty)
ftdi_set_termios(tty, port, NULL);
return usb_serial_generic_open(tty, port);
}
static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
/* Disable flow control */
if (!on) {
if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, NULL, 0,
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
}
/* drop RTS and DTR */
if (on)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
else
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/* The SIO requires the first byte to have:
* B0 1
* B1 0
* B2..7 length of message excluding byte 0
*
* The new devices do not require this byte
*/
static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
void *dest, size_t size)
{
struct ftdi_private *priv;
int count;
unsigned long flags;
priv = usb_get_serial_port_data(port);
if (priv->chip_type == SIO) {
unsigned char *buffer = dest;
int i, len, c;
count = 0;
spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < size - 1; i += priv->max_packet_size) {
len = min_t(int, size - i, priv->max_packet_size) - 1;
c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
if (!c)
break;
port->icount.tx += c;
buffer[i] = (c << 2) + 1;
count += c + 1;
}
spin_unlock_irqrestore(&port->lock, flags);
} else {
count = kfifo_out_locked(&port->write_fifo, dest, size,
&port->lock);
port->icount.tx += count;
}
return count;
}
#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
static int ftdi_process_packet(struct usb_serial_port *port,
struct ftdi_private *priv, unsigned char *buf, int len)
{
unsigned char status;
bool brkint = false;
int i;
char flag;
if (len < 2) {
dev_dbg(&port->dev, "malformed packet\n");
return 0;
}
/* Compare new line status to the old one, signal if different/
N.B. packet may be processed more than once, but differences
are only processed once. */
status = buf[0] & FTDI_STATUS_B0_MASK;
if (status != priv->prev_status) {
char diff_status = status ^ priv->prev_status;
if (diff_status & FTDI_RS0_CTS)
port->icount.cts++;
if (diff_status & FTDI_RS0_DSR)
port->icount.dsr++;
if (diff_status & FTDI_RS0_RI)
port->icount.rng++;
if (diff_status & FTDI_RS0_RLSD) {
struct tty_struct *tty;
port->icount.dcd++;
tty = tty_port_tty_get(&port->port);
if (tty)
usb_serial_handle_dcd_change(port, tty,
status & FTDI_RS0_RLSD);
tty_kref_put(tty);
}
wake_up_interruptible(&port->port.delta_msr_wait);
priv->prev_status = status;
}
/* save if the transmitter is empty or not */
if (buf[1] & FTDI_RS_TEMT)
priv->transmit_empty = 1;
else
priv->transmit_empty = 0;
if (len == 2)
return 0; /* status only */
/*
* Break and error status must only be processed for packets with
* data payload to avoid over-reporting.
*/
flag = TTY_NORMAL;
if (buf[1] & FTDI_RS_ERR_MASK) {
/*
* Break takes precedence over parity, which takes precedence
* over framing errors. Note that break is only associated
* with the last character in the buffer and only when it's a
* NUL.
*/
if (buf[1] & FTDI_RS_BI && buf[len - 1] == '\0') {
port->icount.brk++;
brkint = true;
}
if (buf[1] & FTDI_RS_PE) {
flag = TTY_PARITY;
port->icount.parity++;
} else if (buf[1] & FTDI_RS_FE) {
flag = TTY_FRAME;
port->icount.frame++;
}
/* Overrun is special, not associated with a char */
if (buf[1] & FTDI_RS_OE) {
port->icount.overrun++;
tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
}
}
port->icount.rx += len - 2;
if (brkint || port->sysrq) {
for (i = 2; i < len; i++) {
if (brkint && i == len - 1) {
if (usb_serial_handle_break(port))
return len - 3;
flag = TTY_BREAK;
}
if (usb_serial_handle_sysrq_char(port, buf[i]))
continue;
tty_insert_flip_char(&port->port, buf[i], flag);
}
} else {
tty_insert_flip_string_fixed_flag(&port->port, buf + 2, flag,
len - 2);
}
return len - 2;
}
static void ftdi_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *data = urb->transfer_buffer;
int i;
int len;
int count = 0;
for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
len = min_t(int, urb->actual_length - i, priv->max_packet_size);
count += ftdi_process_packet(port, priv, &data[i], len);
}
if (count)
tty_flip_buffer_push(&port->port);
}
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
u16 value;
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
/* last_set_data_value NEVER has the break bit set in it */
if (break_state)
value = priv->last_set_data_value | FTDI_SIO_SET_BREAK;
else
value = priv->last_set_data_value;
if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
value , priv->interface,
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n",
__func__, break_state);
}
dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__,
break_state, value);
}
static bool ftdi_tx_empty(struct usb_serial_port *port)
{
unsigned char buf[2];
int ret;
ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
return false;
}
return true;
}
/* old_termios contains the original termios settings and tty->termios contains
* the new setting to be used
* WARNING: set_termios calls this with old_termios in kernel space
*/
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_device *dev = port->serial->dev;
struct device *ddev = &port->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
u16 value, index;
int ret;
/* Force baud rate if this device requires it, unless it is set to
B0. */
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__);
tty_encode_baud_rate(tty, priv->force_baud,
priv->force_baud);
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__);
termios->c_cflag |= CRTSCTS;
}
/*
* All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
* support CS5/6 and revert the CSIZE setting instead.
*
* CS5 however is used to control some smartcard readers which abuse
* this limitation to switch modes. Original FTDI chips fall back to
* eight data bits.
*
* TODO: Implement a quirk to only allow this with mentioned
* readers. One I know of (Argolis Smartreader V1)
* returns "USB smartcard server" as iInterface string.
* The vendor didn't bother with a custom VID/PID of
* course.
*/
if (C_CSIZE(tty) == CS6) {
dev_warn(ddev, "requested CSIZE setting not supported\n");
termios->c_cflag &= ~CSIZE;
if (old_termios)
termios->c_cflag |= old_termios->c_cflag & CSIZE;
else
termios->c_cflag |= CS8;
}
cflag = termios->c_cflag;
if (!old_termios)
goto no_skip;
if (old_termios->c_cflag == termios->c_cflag
&& old_termios->c_ispeed == termios->c_ispeed
&& old_termios->c_ospeed == termios->c_ospeed)
goto no_c_cflag_changes;
/* NOTE These routines can get interrupted by
ftdi_sio_read_bulk_callback - need to examine what this means -
don't see any problems yet */
if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
(termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
goto no_data_parity_stop_changes;
no_skip:
/* Set number of data bits, parity, stop bits */
value = 0;
value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
FTDI_SIO_SET_DATA_STOP_BITS_1);
if (cflag & PARENB) {
if (cflag & CMSPAR)
value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_MARK :
FTDI_SIO_SET_DATA_PARITY_SPACE;
else
value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_ODD :
FTDI_SIO_SET_DATA_PARITY_EVEN;
} else {
value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
switch (cflag & CSIZE) {
case CS5:
dev_dbg(ddev, "Setting CS5 quirk\n");
break;
case CS7:
value |= 7;
dev_dbg(ddev, "Setting CS7\n");
break;
default:
case CS8:
value |= 8;
dev_dbg(ddev, "Setting CS8\n");
break;
}
/* This is needed by the break command since it uses the same command
- but is or'ed with this value */
priv->last_set_data_value = value;
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
value , priv->interface,
NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n",
__func__);
}
/* Now do the baudrate */
no_data_parity_stop_changes:
if ((cflag & CBAUD) == B0) {
/* Disable flow control */
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(ddev, "%s error from disable flowcontrol urb\n",
__func__);
}
/* Drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
mutex_lock(&priv->cfg_lock);
if (change_speed(tty, port))
dev_err(ddev, "%s urb failed to set baudrate\n", __func__);
mutex_unlock(&priv->cfg_lock);
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
no_c_cflag_changes:
/* Set hardware-assisted flow control */
value = 0;
if (C_CRTSCTS(tty)) {
dev_dbg(&port->dev, "enabling rts/cts flow control\n");
index = FTDI_SIO_RTS_CTS_HS;
} else if (I_IXON(tty)) {
dev_dbg(&port->dev, "enabling xon/xoff flow control\n");
index = FTDI_SIO_XON_XOFF_HS;
value = STOP_CHAR(tty) << 8 | START_CHAR(tty);
} else {
dev_dbg(&port->dev, "disabling flow control\n");
index = FTDI_SIO_DISABLE_FLOW_CTRL;
}
index |= priv->interface;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
value, index, NULL, 0, WDR_TIMEOUT);
if (ret < 0)
dev_err(&port->dev, "failed to set flow control: %d\n", ret);
}
/*
* Get modem-control status.
*
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
int ret;
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/*
* The 8U232AM returns a two byte value (the SIO a 1 byte value) in
* the same format as the data returned from the in point.
*/
switch (priv->chip_type) {
case SIO:
len = 1;
break;
case FT8U232AM:
case FT232BM:
case FT2232C:
case FT232RL:
case FT2232H:
case FT4232H:
case FT232H:
case FTX:
len = 2;
break;
default:
ret = -EFAULT;
goto out;
}
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, len, WDR_TIMEOUT);
/* NOTE: We allow short responses and handle that below. */
if (ret < 1) {
dev_err(&port->dev, "failed to get modem status: %d\n", ret);
if (ret >= 0)
ret = -EIO;
ret = usb_translate_errors(ret);
goto out;
}
status[0] = buf[0];
if (ret > 1)
status[1] = buf[1];
else
status[1] = 0;
dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0],
status[1]);
out:
kfree(buf);
return ret;
}
static int ftdi_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char buf[2];
int ret;
ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;
ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
priv->last_dtr_rts;
return ret;
}
static int ftdi_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
return update_mctrl(port, set, clear);
}
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
void __user *argp = (void __user *)arg;
switch (cmd) {
case TIOCSERGETLSR:
return get_lsr_info(port, argp);
default:
break;
}
return -ENOIOCTLCMD;
}
module_usb_serial_driver(serial_drivers, id_table_combined);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(ndi_latency_timer, int, 0644);
MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");