| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2020 Amarula Solutions(India) |
| * Author: Jagan Teki <jagan@amarulasolutions.com> |
| */ |
| |
| #include <drm/drm_of.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_mipi_dsi.h> |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #define HACTIVE_LI 0x20 |
| #define VACTIVE_LI 0x21 |
| #define VACTIVE_HACTIVE_HI 0x22 |
| #define HFP_LI 0x23 |
| #define HSYNC_LI 0x24 |
| #define HBP_LI 0x25 |
| #define HFP_HSW_HBP_HI 0x26 |
| #define VFP 0x27 |
| #define VSYNC 0x28 |
| #define VBP 0x29 |
| |
| struct chipone { |
| struct device *dev; |
| struct drm_bridge bridge; |
| struct drm_bridge *panel_bridge; |
| struct gpio_desc *enable_gpio; |
| struct regulator *vdd1; |
| struct regulator *vdd2; |
| struct regulator *vdd3; |
| }; |
| |
| static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct chipone, bridge); |
| } |
| |
| static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge) |
| { |
| return &bridge->encoder->crtc->state->adjusted_mode; |
| } |
| |
| static inline int chipone_dsi_write(struct chipone *icn, const void *seq, |
| size_t len) |
| { |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev); |
| |
| return mipi_dsi_generic_write(dsi, seq, len); |
| } |
| |
| #define ICN6211_DSI(icn, seq...) \ |
| { \ |
| const u8 d[] = { seq }; \ |
| chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \ |
| } |
| |
| static void chipone_enable(struct drm_bridge *bridge) |
| { |
| struct chipone *icn = bridge_to_chipone(bridge); |
| struct drm_display_mode *mode = bridge_to_mode(bridge); |
| |
| ICN6211_DSI(icn, 0x7a, 0xc1); |
| |
| ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff); |
| |
| ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff); |
| |
| /** |
| * lsb nibble: 2nd nibble of hdisplay |
| * msb nibble: 2nd nibble of vdisplay |
| */ |
| ICN6211_DSI(icn, VACTIVE_HACTIVE_HI, |
| ((mode->hdisplay >> 8) & 0xf) | |
| (((mode->vdisplay >> 8) & 0xf) << 4)); |
| |
| ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay); |
| |
| ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start); |
| |
| ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end); |
| |
| ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00); |
| |
| ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay); |
| |
| ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start); |
| |
| ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end); |
| |
| /* dsi specific sequence */ |
| ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80); |
| ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28); |
| ICN6211_DSI(icn, 0xb5, 0xa0); |
| ICN6211_DSI(icn, 0x5c, 0xff); |
| ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01); |
| ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92); |
| ICN6211_DSI(icn, 0x6b, 0x71); |
| ICN6211_DSI(icn, 0x69, 0x2b); |
| ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40); |
| ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98); |
| |
| /* icn6211 specific sequence */ |
| ICN6211_DSI(icn, 0xb6, 0x20); |
| ICN6211_DSI(icn, 0x51, 0x20); |
| ICN6211_DSI(icn, 0x09, 0x10); |
| |
| usleep_range(10000, 11000); |
| } |
| |
| static void chipone_pre_enable(struct drm_bridge *bridge) |
| { |
| struct chipone *icn = bridge_to_chipone(bridge); |
| int ret; |
| |
| if (icn->vdd1) { |
| ret = regulator_enable(icn->vdd1); |
| if (ret) |
| DRM_DEV_ERROR(icn->dev, |
| "failed to enable VDD1 regulator: %d\n", ret); |
| } |
| |
| if (icn->vdd2) { |
| ret = regulator_enable(icn->vdd2); |
| if (ret) |
| DRM_DEV_ERROR(icn->dev, |
| "failed to enable VDD2 regulator: %d\n", ret); |
| } |
| |
| if (icn->vdd3) { |
| ret = regulator_enable(icn->vdd3); |
| if (ret) |
| DRM_DEV_ERROR(icn->dev, |
| "failed to enable VDD3 regulator: %d\n", ret); |
| } |
| |
| gpiod_set_value(icn->enable_gpio, 1); |
| |
| usleep_range(10000, 11000); |
| } |
| |
| static void chipone_post_disable(struct drm_bridge *bridge) |
| { |
| struct chipone *icn = bridge_to_chipone(bridge); |
| |
| if (icn->vdd1) |
| regulator_disable(icn->vdd1); |
| |
| if (icn->vdd2) |
| regulator_disable(icn->vdd2); |
| |
| if (icn->vdd3) |
| regulator_disable(icn->vdd3); |
| |
| gpiod_set_value(icn->enable_gpio, 0); |
| } |
| |
| static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) |
| { |
| struct chipone *icn = bridge_to_chipone(bridge); |
| |
| return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags); |
| } |
| |
| static const struct drm_bridge_funcs chipone_bridge_funcs = { |
| .attach = chipone_attach, |
| .post_disable = chipone_post_disable, |
| .pre_enable = chipone_pre_enable, |
| .enable = chipone_enable, |
| }; |
| |
| static int chipone_parse_dt(struct chipone *icn) |
| { |
| struct device *dev = icn->dev; |
| struct drm_panel *panel; |
| int ret; |
| |
| icn->vdd1 = devm_regulator_get_optional(dev, "vdd1"); |
| if (IS_ERR(icn->vdd1)) { |
| ret = PTR_ERR(icn->vdd1); |
| if (ret == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| icn->vdd1 = NULL; |
| DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret); |
| } |
| |
| icn->vdd2 = devm_regulator_get_optional(dev, "vdd2"); |
| if (IS_ERR(icn->vdd2)) { |
| ret = PTR_ERR(icn->vdd2); |
| if (ret == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| icn->vdd2 = NULL; |
| DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret); |
| } |
| |
| icn->vdd3 = devm_regulator_get_optional(dev, "vdd3"); |
| if (IS_ERR(icn->vdd3)) { |
| ret = PTR_ERR(icn->vdd3); |
| if (ret == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| icn->vdd3 = NULL; |
| DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret); |
| } |
| |
| icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(icn->enable_gpio)) { |
| DRM_DEV_ERROR(dev, "failed to get enable GPIO\n"); |
| return PTR_ERR(icn->enable_gpio); |
| } |
| |
| ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); |
| if (ret) |
| return ret; |
| |
| icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel); |
| if (IS_ERR(icn->panel_bridge)) |
| return PTR_ERR(icn->panel_bridge); |
| |
| return 0; |
| } |
| |
| static int chipone_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct chipone *icn; |
| int ret; |
| |
| icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL); |
| if (!icn) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, icn); |
| icn->dev = dev; |
| |
| ret = chipone_parse_dt(icn); |
| if (ret) |
| return ret; |
| |
| icn->bridge.funcs = &chipone_bridge_funcs; |
| icn->bridge.type = DRM_MODE_CONNECTOR_DPI; |
| icn->bridge.of_node = dev->of_node; |
| |
| drm_bridge_add(&icn->bridge); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| drm_bridge_remove(&icn->bridge); |
| dev_err(dev, "failed to attach dsi\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int chipone_remove(struct mipi_dsi_device *dsi) |
| { |
| struct chipone *icn = mipi_dsi_get_drvdata(dsi); |
| |
| mipi_dsi_detach(dsi); |
| drm_bridge_remove(&icn->bridge); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id chipone_of_match[] = { |
| { .compatible = "chipone,icn6211", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, chipone_of_match); |
| |
| static struct mipi_dsi_driver chipone_driver = { |
| .probe = chipone_probe, |
| .remove = chipone_remove, |
| .driver = { |
| .name = "chipone-icn6211", |
| .owner = THIS_MODULE, |
| .of_match_table = chipone_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(chipone_driver); |
| |
| MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); |
| MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge"); |
| MODULE_LICENSE("GPL"); |