blob: f20ae3c963cb3f6080a5f68b8a3b86ca06b51c05 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# Temperature sensor drivers
#
menu "Temperature sensors"
config IQS620AT_TEMP
tristate "Azoteq IQS620AT temperature sensor"
depends on MFD_IQS62X || COMPILE_TEST
help
Say Y here if you want to build support for the Azoteq IQS620AT
temperature sensor.
To compile this driver as a module, choose M here: the module
will be called iqs620at-temp.
config LTC2983
tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for the LTC2983 Multi-Sensor
high accuracy digital temperature measurement system.
To compile this driver as a module, choose M here: the module
will be called ltc2983.
config MAXIM_THERMOCOUPLE
tristate "Maxim thermocouple sensors"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the Maxim series of
thermocouple sensors connected via SPI.
Supported sensors:
* MAX6675
* MAX31855
This driver can also be built as a module. If so, the module will
be called maxim_thermocouple.
config HID_SENSOR_TEMP
tristate "HID Environmental temperature sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
Say yes here to build support for the HID SENSOR
temperature driver
To compile this driver as a module, choose M here: the module
will be called hid-sensor-temperature.
config MLX90614
tristate "MLX90614 contact-less infrared sensor"
depends on I2C
help
If you say yes here you get support for the Melexis
MLX90614 contact-less infrared sensor connected with I2C.
This driver can also be built as a module. If so, the module will
be called mlx90614.
config MLX90632
tristate "MLX90632 contact-less infrared sensor with medical accuracy"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for the Melexis
MLX90632 contact-less infrared sensor with medical accuracy
connected with I2C.
This driver can also be built as a module. If so, the module will
be called mlx90632.
config TMP006
tristate "TMP006 infrared thermopile sensor"
depends on I2C
help
If you say yes here you get support for the Texas Instruments
TMP006 infrared thermopile sensor.
This driver can also be built as a module. If so, the module will
be called tmp006.
config TMP007
tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
depends on I2C
help
If you say yes here you get support for the Texas Instruments
TMP007 infrared thermopile sensor with Integrated Math Engine.
This driver can also be built as a module. If so, the module will
be called tmp007.
config TMP117
tristate "TMP117 Digital temperature sensor with integrated NV memory"
depends on I2C
help
If you say yes here you get support for the Texas Instruments
TMP117 Digital temperature sensor with integrated NV memory.
This driver can also be built as a module. If so, the module will
be called tmp117.
config TSYS01
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
depends on I2C
select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
TSYS01 I2C temperature sensor.
This driver can also be built as a module. If so, the module will
be called tsys01.
config TSYS02D
tristate "Measurement Specialties TSYS02D temperature sensor"
depends on I2C
select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
TSYS02D temperature sensor.
This driver can also be built as a module. If so, the module will
be called tsys02d.
config MAX31856
tristate "MAX31856 thermocouple sensor"
depends on SPI
help
If you say yes here you get support for MAX31856
thermocouple sensor chip connected via SPI.
This driver can also be built as a module. If so, the module
will be called max31856.
endmenu