blob: 5e1c3ddae5f83ae4380534668c1ed0a4bcf8e4db [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Freescale GPMI NAND Flash Driver
*
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*/
#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
#define __DRIVERS_MTD_NAND_GPMI_NAND_H
#include <linux/mtd/rawnand.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
struct resources {
void __iomem *gpmi_regs;
void __iomem *bch_regs;
unsigned int dma_low_channel;
unsigned int dma_high_channel;
struct clk *clock[GPMI_CLK_MAX];
};
/**
* struct bch_geometry - BCH geometry description.
* @gf_len: The length of Galois Field. (e.g., 13 or 14)
* @ecc_strength: A number that describes the strength of the ECC
* algorithm.
* @page_size: The size, in bytes, of a physical page, including
* both data and OOB.
* @metadata_size: The size, in bytes, of the metadata.
* @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
* the first chunk in the page includes both data and
* metadata, so it's a bit larger than this value.
* @ecc_chunk_count: The number of ECC chunks in the page,
* @payload_size: The size, in bytes, of the payload buffer.
* @auxiliary_size: The size, in bytes, of the auxiliary buffer.
* @auxiliary_status_offset: The offset into the auxiliary buffer at which
* the ECC status appears.
* @block_mark_byte_offset: The byte offset in the ECC-based page view at
* which the underlying physical block mark appears.
* @block_mark_bit_offset: The bit offset into the ECC-based page view at
* which the underlying physical block mark appears.
*/
struct bch_geometry {
unsigned int gf_len;
unsigned int ecc_strength;
unsigned int page_size;
unsigned int metadata_size;
unsigned int ecc_chunk_size;
unsigned int ecc_chunk_count;
unsigned int payload_size;
unsigned int auxiliary_size;
unsigned int auxiliary_status_offset;
unsigned int block_mark_byte_offset;
unsigned int block_mark_bit_offset;
};
/**
* struct boot_rom_geometry - Boot ROM geometry description.
* @stride_size_in_pages: The size of a boot block stride, in pages.
* @search_area_stride_exponent: The logarithm to base 2 of the size of a
* search area in boot block strides.
*/
struct boot_rom_geometry {
unsigned int stride_size_in_pages;
unsigned int search_area_stride_exponent;
};
enum gpmi_type {
IS_MX23,
IS_MX28,
IS_MX6Q,
IS_MX6SX,
IS_MX7D,
};
struct gpmi_devdata {
enum gpmi_type type;
int bch_max_ecc_strength;
int max_chain_delay; /* See the SDR EDO mode */
const char * const *clks;
const int clks_count;
};
/**
* struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
* @must_apply_timings: Whether controller timings have already been
* applied or not (useful only while there is
* support for only one chip select)
* @clk_rate: The clock rate that must be used to derive the
* following parameters
* @timing0: HW_GPMI_TIMING0 register
* @timing1: HW_GPMI_TIMING1 register
* @ctrl1n: HW_GPMI_CTRL1n register
*/
struct gpmi_nfc_hardware_timing {
bool must_apply_timings;
unsigned long int clk_rate;
u32 timing0;
u32 timing1;
u32 ctrl1n;
};
#define GPMI_MAX_TRANSFERS 8
struct gpmi_transfer {
u8 cmdbuf[8];
struct scatterlist sgl;
enum dma_data_direction direction;
};
struct gpmi_nand_data {
/* Devdata */
const struct gpmi_devdata *devdata;
/* System Interface */
struct device *dev;
struct platform_device *pdev;
/* Resources */
struct resources resources;
/* Flash Hardware */
struct gpmi_nfc_hardware_timing hw;
/* BCH */
struct bch_geometry bch_geometry;
struct completion bch_done;
/* NAND Boot issue */
bool swap_block_mark;
struct boot_rom_geometry rom_geometry;
/* MTD / NAND */
struct nand_controller base;
struct nand_chip nand;
struct gpmi_transfer transfers[GPMI_MAX_TRANSFERS];
int ntransfers;
bool bch;
uint32_t bch_flashlayout0;
uint32_t bch_flashlayout1;
char *data_buffer_dma;
void *auxiliary_virt;
dma_addr_t auxiliary_phys;
void *raw_buffer;
/* DMA channels */
#define DMA_CHANS 8
struct dma_chan *dma_chans[DMA_CHANS];
struct completion dma_done;
};
/* BCH : Status Block Completion Codes */
#define STATUS_GOOD 0x00
#define STATUS_ERASED 0xff
#define STATUS_UNCORRECTABLE 0xfe
/* Use the devdata to distinguish different Archs. */
#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
GPMI_IS_MX7D(x))
#define GPMI_IS_MXS(x) (GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
#endif