blob: 0e9d426fe4f2b21bc20e21b5c7e41cc2a2ae7572 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Ingenic JZ47xx NAND driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/jz4780-nemc.h>
#include "ingenic_ecc.h"
#define DRV_NAME "ingenic-nand"
struct jz_soc_info {
unsigned long data_offset;
unsigned long addr_offset;
unsigned long cmd_offset;
const struct mtd_ooblayout_ops *oob_layout;
};
struct ingenic_nand_cs {
unsigned int bank;
void __iomem *base;
};
struct ingenic_nfc {
struct device *dev;
struct ingenic_ecc *ecc;
const struct jz_soc_info *soc_info;
struct nand_controller controller;
unsigned int num_banks;
struct list_head chips;
struct ingenic_nand_cs cs[];
};
struct ingenic_nand {
struct nand_chip chip;
struct list_head chip_list;
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
};
static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
}
static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
{
return container_of(ctrl, struct ingenic_nfc, controller);
}
static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section || !ecc->total)
return -ERANGE;
oobregion->length = ecc->total;
oobregion->offset = 12;
return 0;
}
static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section)
return -ERANGE;
oobregion->length = mtd->oobsize - ecc->total - 12;
oobregion->offset = 12 + ecc->total;
return 0;
}
static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
.ecc = qi_lb60_ooblayout_ecc,
.free = qi_lb60_ooblayout_free,
};
static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section || !ecc->total)
return -ERANGE;
oobregion->length = ecc->total;
oobregion->offset = 3;
return 0;
}
static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section)
return -ERANGE;
oobregion->length = mtd->oobsize - ecc->total - 3;
oobregion->offset = 3 + ecc->total;
return 0;
}
static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
.ecc = jz4725b_ooblayout_ecc,
.free = jz4725b_ooblayout_free,
};
static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
nand->reading = (mode == NAND_ECC_READ);
}
static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
u8 *ecc_code)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
struct ingenic_ecc_params params;
/*
* Don't need to generate the ECC when reading, the ECC engine does it
* for us as part of decoding/correction.
*/
if (nand->reading)
return 0;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return ingenic_ecc_calculate(nfc->ecc, &params, dat, ecc_code);
}
static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
u8 *read_ecc, u8 *calc_ecc)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
struct ingenic_ecc_params params;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return ingenic_ecc_correct(nfc->ecc, &params, dat, read_ecc);
}
static int ingenic_nand_attach_chip(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
int eccbytes;
if (chip->ecc.strength == 4) {
/* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
chip->ecc.bytes = 9;
} else {
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
}
switch (chip->ecc.engine_type) {
case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
}
chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
case NAND_ECC_ENGINE_TYPE_SOFT:
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
chip->ecc.engine_type);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
if (eccbytes > mtd->oobsize - 2) {
dev_err(nfc->dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
/*
* The generic layout for BBT markers will most likely overlap with our
* ECC bytes in the OOB, so move the BBT markers outside the OOB area.
*/
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
/* For legacy reasons we use a different layout on the qi,lb60 board. */
if (of_machine_is_compatible("qi,lb60"))
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
else if (nfc->soc_info->oob_layout)
mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
else
mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
static int ingenic_nand_exec_instr(struct nand_chip *chip,
struct ingenic_nand_cs *cs,
const struct nand_op_instr *instr)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
unsigned int i;
switch (instr->type) {
case NAND_OP_CMD_INSTR:
writeb(instr->ctx.cmd.opcode,
cs->base + nfc->soc_info->cmd_offset);
return 0;
case NAND_OP_ADDR_INSTR:
for (i = 0; i < instr->ctx.addr.naddrs; i++)
writeb(instr->ctx.addr.addrs[i],
cs->base + nfc->soc_info->addr_offset);
return 0;
case NAND_OP_DATA_IN_INSTR:
if (instr->ctx.data.force_8bit ||
!(chip->options & NAND_BUSWIDTH_16))
ioread8_rep(cs->base + nfc->soc_info->data_offset,
instr->ctx.data.buf.in,
instr->ctx.data.len);
else
ioread16_rep(cs->base + nfc->soc_info->data_offset,
instr->ctx.data.buf.in,
instr->ctx.data.len);
return 0;
case NAND_OP_DATA_OUT_INSTR:
if (instr->ctx.data.force_8bit ||
!(chip->options & NAND_BUSWIDTH_16))
iowrite8_rep(cs->base + nfc->soc_info->data_offset,
instr->ctx.data.buf.out,
instr->ctx.data.len);
else
iowrite16_rep(cs->base + nfc->soc_info->data_offset,
instr->ctx.data.buf.out,
instr->ctx.data.len);
return 0;
case NAND_OP_WAITRDY_INSTR:
if (!nand->busy_gpio)
return nand_soft_waitrdy(chip,
instr->ctx.waitrdy.timeout_ms);
return nand_gpio_waitrdy(chip, nand->busy_gpio,
instr->ctx.waitrdy.timeout_ms);
default:
break;
}
return -EINVAL;
}
static int ingenic_nand_exec_op(struct nand_chip *chip,
const struct nand_operation *op,
bool check_only)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
struct ingenic_nand_cs *cs;
unsigned int i;
int ret = 0;
if (check_only)
return 0;
cs = &nfc->cs[op->cs];
jz4780_nemc_assert(nfc->dev, cs->bank, true);
for (i = 0; i < op->ninstrs; i++) {
ret = ingenic_nand_exec_instr(chip, cs, &op->instrs[i]);
if (ret)
break;
if (op->instrs[i].delay_ns)
ndelay(op->instrs[i].delay_ns);
}
jz4780_nemc_assert(nfc->dev, cs->bank, false);
return ret;
}
static const struct nand_controller_ops ingenic_nand_controller_ops = {
.attach_chip = ingenic_nand_attach_chip,
.exec_op = ingenic_nand_exec_op,
};
static int ingenic_nand_init_chip(struct platform_device *pdev,
struct ingenic_nfc *nfc,
struct device_node *np,
unsigned int chipnr)
{
struct device *dev = &pdev->dev;
struct ingenic_nand *nand;
struct ingenic_nand_cs *cs;
struct nand_chip *chip;
struct mtd_info *mtd;
const __be32 *reg;
int ret = 0;
cs = &nfc->cs[chipnr];
reg = of_get_property(np, "reg", NULL);
if (!reg)
return -EINVAL;
cs->bank = be32_to_cpu(*reg);
jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
cs->base = devm_platform_ioremap_resource(pdev, chipnr);
if (IS_ERR(cs->base))
return PTR_ERR(cs->base);
nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
if (!nand)
return -ENOMEM;
nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
if (IS_ERR(nand->busy_gpio)) {
ret = PTR_ERR(nand->busy_gpio);
dev_err(dev, "failed to request busy GPIO: %d\n", ret);
return ret;
}
/*
* The rb-gpios semantics was undocumented and qi,lb60 (along with
* the ingenic driver) got it wrong. The active state encodes the
* NAND ready state, which is high level. Since there's no signal
* inverter on this board, it should be active-high. Let's fix that
* here for older DTs so we can re-use the generic nand_gpio_waitrdy()
* helper, and be consistent with what other drivers do.
*/
if (of_machine_is_compatible("qi,lb60") &&
gpiod_is_active_low(nand->busy_gpio))
gpiod_toggle_active_low(nand->busy_gpio);
nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
if (IS_ERR(nand->wp_gpio)) {
ret = PTR_ERR(nand->wp_gpio);
dev_err(dev, "failed to request WP GPIO: %d\n", ret);
return ret;
}
chip = &nand->chip;
mtd = nand_to_mtd(chip);
mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
cs->bank);
if (!mtd->name)
return -ENOMEM;
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
chip->controller->ops = &ingenic_nand_controller_ops;
ret = nand_scan(chip, 1);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
nand_cleanup(chip);
return ret;
}
list_add_tail(&nand->chip_list, &nfc->chips);
return 0;
}
static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
{
struct ingenic_nand *ingenic_chip;
struct nand_chip *chip;
int ret;
while (!list_empty(&nfc->chips)) {
ingenic_chip = list_first_entry(&nfc->chips,
struct ingenic_nand, chip_list);
chip = &ingenic_chip->chip;
ret = mtd_device_unregister(nand_to_mtd(chip));
WARN_ON(ret);
nand_cleanup(chip);
list_del(&ingenic_chip->chip_list);
}
}
static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
int i = 0;
int ret;
int num_chips = of_get_child_count(dev->of_node);
if (num_chips > nfc->num_banks) {
dev_err(dev, "found %d chips but only %d banks\n",
num_chips, nfc->num_banks);
return -EINVAL;
}
for_each_child_of_node(dev->of_node, np) {
ret = ingenic_nand_init_chip(pdev, nfc, np, i);
if (ret) {
ingenic_nand_cleanup_chips(nfc);
of_node_put(np);
return ret;
}
i++;
}
return 0;
}
static int ingenic_nand_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int num_banks;
struct ingenic_nfc *nfc;
int ret;
num_banks = jz4780_nemc_num_banks(dev);
if (num_banks == 0) {
dev_err(dev, "no banks found\n");
return -ENODEV;
}
nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
if (!nfc)
return -ENOMEM;
nfc->soc_info = device_get_match_data(dev);
if (!nfc->soc_info)
return -EINVAL;
/*
* Check for ECC HW before we call nand_scan_ident, to prevent us from
* having to call it again if the ECC driver returns -EPROBE_DEFER.
*/
nfc->ecc = of_ingenic_ecc_get(dev->of_node);
if (IS_ERR(nfc->ecc))
return PTR_ERR(nfc->ecc);
nfc->dev = dev;
nfc->num_banks = num_banks;
nand_controller_init(&nfc->controller);
INIT_LIST_HEAD(&nfc->chips);
ret = ingenic_nand_init_chips(nfc, pdev);
if (ret) {
if (nfc->ecc)
ingenic_ecc_release(nfc->ecc);
return ret;
}
platform_set_drvdata(pdev, nfc);
return 0;
}
static int ingenic_nand_remove(struct platform_device *pdev)
{
struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
if (nfc->ecc)
ingenic_ecc_release(nfc->ecc);
ingenic_nand_cleanup_chips(nfc);
return 0;
}
static const struct jz_soc_info jz4740_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
};
static const struct jz_soc_info jz4725b_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
.oob_layout = &jz4725b_ooblayout_ops,
};
static const struct jz_soc_info jz4780_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00400000,
.addr_offset = 0x00800000,
};
static const struct of_device_id ingenic_nand_dt_match[] = {
{ .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
{ .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
{},
};
MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
static struct platform_driver ingenic_nand_driver = {
.probe = ingenic_nand_probe,
.remove = ingenic_nand_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(ingenic_nand_dt_match),
},
};
module_platform_driver(ingenic_nand_driver);
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
MODULE_LICENSE("GPL v2");