blob: f5581db0ba9bacb040d5328866ab2bc47b2029e0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
developing this code.
This contains the functions to handle the dma.
Copyright (C) 2007-2009 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
#include <asm/io.h>
#include "dwmac1000.h"
#include "dwmac_dma.h"
static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
{
u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
int i;
pr_info("dwmac1000: Master AXI performs %s burst length\n",
!(value & DMA_AXI_UNDEF) ? "fixed" : "any");
if (axi->axi_lpi_en)
value |= DMA_AXI_EN_LPI;
if (axi->axi_xit_frm)
value |= DMA_AXI_LPI_XIT_FRM;
value &= ~DMA_AXI_WR_OSR_LMT;
value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
DMA_AXI_WR_OSR_LMT_SHIFT;
value &= ~DMA_AXI_RD_OSR_LMT;
value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
DMA_AXI_RD_OSR_LMT_SHIFT;
/* Depending on the UNDEF bit the Master AXI will perform any burst
* length according to the BLEN programmed (by default all BLEN are
* set).
*/
for (i = 0; i < AXI_BLEN; i++) {
switch (axi->axi_blen[i]) {
case 256:
value |= DMA_AXI_BLEN256;
break;
case 128:
value |= DMA_AXI_BLEN128;
break;
case 64:
value |= DMA_AXI_BLEN64;
break;
case 32:
value |= DMA_AXI_BLEN32;
break;
case 16:
value |= DMA_AXI_BLEN16;
break;
case 8:
value |= DMA_AXI_BLEN8;
break;
case 4:
value |= DMA_AXI_BLEN4;
break;
}
}
writel(value, ioaddr + DMA_AXI_BUS_MODE);
}
static void dwmac1000_dma_init(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, int atds)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
/*
* Set the DMA PBL (Programmable Burst Length) mode.
*
* Note: before stmmac core 3.50 this mode bit was 4xPBL, and
* post 3.5 mode bit acts as 8*PBL.
*/
if (dma_cfg->pblx8)
value |= DMA_BUS_MODE_MAXPBL;
value |= DMA_BUS_MODE_USP;
value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
/* Set the Fixed burst mode */
if (dma_cfg->fixed_burst)
value |= DMA_BUS_MODE_FB;
/* Mixed Burst has no effect when fb is set */
if (dma_cfg->mixed_burst)
value |= DMA_BUS_MODE_MB;
if (atds)
value |= DMA_BUS_MODE_ATDS;
if (dma_cfg->aal)
value |= DMA_BUS_MODE_AAL;
writel(value, ioaddr + DMA_BUS_MODE);
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
}
static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
dma_addr_t dma_rx_phy, u32 chan)
{
/* RX descriptor base address list must be written into DMA CSR3 */
writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
}
static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
dma_addr_t dma_tx_phy, u32 chan)
{
/* TX descriptor base address list must be written into DMA CSR4 */
writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
}
static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
{
csr6 &= ~DMA_CONTROL_RFA_MASK;
csr6 &= ~DMA_CONTROL_RFD_MASK;
/* Leave flow control disabled if receive fifo size is less than
* 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
* and send XON when 2K less than full.
*/
if (rxfifosz < 4096) {
csr6 &= ~DMA_CONTROL_EFC;
pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
rxfifosz);
} else {
csr6 |= DMA_CONTROL_EFC;
csr6 |= RFA_FULL_MINUS_1K;
csr6 |= RFD_FULL_MINUS_2K;
}
return csr6;
}
static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
u32 channel, int fifosz, u8 qmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
if (mode == SF_DMA_MODE) {
pr_debug("GMAC: enable RX store and forward mode\n");
csr6 |= DMA_CONTROL_RSF;
} else {
pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
csr6 &= ~DMA_CONTROL_RSF;
csr6 &= DMA_CONTROL_TC_RX_MASK;
if (mode <= 32)
csr6 |= DMA_CONTROL_RTC_32;
else if (mode <= 64)
csr6 |= DMA_CONTROL_RTC_64;
else if (mode <= 96)
csr6 |= DMA_CONTROL_RTC_96;
else
csr6 |= DMA_CONTROL_RTC_128;
}
/* Configure flow control based on rx fifo size */
csr6 = dwmac1000_configure_fc(csr6, fifosz);
writel(csr6, ioaddr + DMA_CONTROL);
}
static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
u32 channel, int fifosz, u8 qmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
if (mode == SF_DMA_MODE) {
pr_debug("GMAC: enable TX store and forward mode\n");
/* Transmit COE type 2 cannot be done in cut-through mode. */
csr6 |= DMA_CONTROL_TSF;
/* Operating on second frame increase the performance
* especially when transmit store-and-forward is used.
*/
csr6 |= DMA_CONTROL_OSF;
} else {
pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
/* Set the transmit threshold */
if (mode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
else if (mode <= 64)
csr6 |= DMA_CONTROL_TTC_64;
else if (mode <= 128)
csr6 |= DMA_CONTROL_TTC_128;
else if (mode <= 192)
csr6 |= DMA_CONTROL_TTC_192;
else
csr6 |= DMA_CONTROL_TTC_256;
}
writel(csr6, ioaddr + DMA_CONTROL);
}
static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
{
int i;
for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
if ((i < 12) || (i > 17))
reg_space[DMA_BUS_MODE / 4 + i] =
readl(ioaddr + DMA_BUS_MODE + i * 4);
}
static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
struct dma_features *dma_cap)
{
u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
if (!hw_cap) {
/* 0x00000000 is the value read on old hardware that does not
* implement this register
*/
return -EOPNOTSUPP;
}
dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
/* MMC */
dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
/* IEEE 1588-2002 */
dma_cap->time_stamp =
(hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
/* IEEE 1588-2008 */
dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
/* 802.3az - Energy-Efficient Ethernet (EEE) */
dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
/* TX and RX csum */
dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
/* TX and RX number of channels */
dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
/* Alternate (enhanced) DESC mode */
dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
return 0;
}
static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
u32 queue)
{
writel(riwt, ioaddr + DMA_RX_WATCHDOG);
}
const struct stmmac_dma_ops dwmac1000_dma_ops = {
.reset = dwmac_dma_reset,
.init = dwmac1000_dma_init,
.init_rx_chan = dwmac1000_dma_init_rx,
.init_tx_chan = dwmac1000_dma_init_tx,
.axi = dwmac1000_dma_axi,
.dump_regs = dwmac1000_dump_dma_regs,
.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
.enable_dma_transmission = dwmac_enable_dma_transmission,
.enable_dma_irq = dwmac_enable_dma_irq,
.disable_dma_irq = dwmac_disable_dma_irq,
.start_tx = dwmac_dma_start_tx,
.stop_tx = dwmac_dma_stop_tx,
.start_rx = dwmac_dma_start_rx,
.stop_rx = dwmac_dma_stop_rx,
.dma_interrupt = dwmac_dma_interrupt,
.get_hw_feature = dwmac1000_get_hw_feature,
.rx_watchdog = dwmac1000_rx_watchdog,
};