| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Wireless LAN device configuration |
| # |
| |
| menuconfig WLAN |
| bool "Wireless LAN" |
| depends on !S390 |
| depends on NET |
| select WIRELESS |
| default y |
| help |
| This section contains all the pre 802.11 and 802.11 wireless |
| device drivers. For a complete list of drivers and documentation |
| on them refer to the wireless wiki: |
| |
| https://wireless.wiki.kernel.org/en/users/Drivers |
| |
| if WLAN |
| |
| source "drivers/net/wireless/admtek/Kconfig" |
| source "drivers/net/wireless/ath/Kconfig" |
| source "drivers/net/wireless/atmel/Kconfig" |
| source "drivers/net/wireless/broadcom/Kconfig" |
| source "drivers/net/wireless/cisco/Kconfig" |
| source "drivers/net/wireless/intel/Kconfig" |
| source "drivers/net/wireless/intersil/Kconfig" |
| source "drivers/net/wireless/marvell/Kconfig" |
| source "drivers/net/wireless/mediatek/Kconfig" |
| source "drivers/net/wireless/microchip/Kconfig" |
| source "drivers/net/wireless/ralink/Kconfig" |
| source "drivers/net/wireless/realtek/Kconfig" |
| source "drivers/net/wireless/rsi/Kconfig" |
| source "drivers/net/wireless/st/Kconfig" |
| source "drivers/net/wireless/ti/Kconfig" |
| source "drivers/net/wireless/zydas/Kconfig" |
| source "drivers/net/wireless/quantenna/Kconfig" |
| |
| config PCMCIA_RAYCS |
| tristate "Aviator/Raytheon 2.4GHz wireless support" |
| depends on PCMCIA |
| select WIRELESS_EXT |
| select WEXT_SPY |
| select WEXT_PRIV |
| help |
| Say Y here if you intend to attach an Aviator/Raytheon PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. |
| Please read the file |
| <file:Documentation/networking/device_drivers/wifi/ray_cs.rst> for |
| details. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ray_cs. If unsure, say N. |
| |
| config PCMCIA_WL3501 |
| tristate "Planet WL3501 PCMCIA cards" |
| depends on CFG80211 && PCMCIA |
| select WIRELESS_EXT |
| select WEXT_SPY |
| help |
| A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. |
| It has basic support for Linux wireless extensions and initial |
| micro support for ethtool. |
| |
| config MAC80211_HWSIM |
| tristate "Simulated radio testing tool for mac80211" |
| depends on MAC80211 |
| help |
| This driver is a developer testing tool that can be used to test |
| IEEE 802.11 networking stack (mac80211) functionality. This is not |
| needed for normal wireless LAN usage and is only for testing. See |
| Documentation/networking/mac80211_hwsim for more information on how |
| to use this tool. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called mac80211_hwsim. If unsure, say N. |
| |
| config USB_NET_RNDIS_WLAN |
| tristate "Wireless RNDIS USB support" |
| depends on USB |
| depends on CFG80211 |
| select USB_NET_DRIVERS |
| select USB_USBNET |
| select USB_NET_CDCETHER |
| select USB_NET_RNDIS_HOST |
| help |
| This is a driver for wireless RNDIS devices. |
| These are USB based adapters found in devices such as: |
| |
| Buffalo WLI-U2-KG125S |
| U.S. Robotics USR5421 |
| Belkin F5D7051 |
| Linksys WUSB54GSv2 |
| Linksys WUSB54GSC |
| Asus WL169gE |
| Eminent EM4045 |
| BT Voyager 1055 |
| Linksys WUSB54GSv1 |
| U.S. Robotics USR5420 |
| BUFFALO WLI-USB-G54 |
| |
| All of these devices are based on Broadcom 4320 chip which is the |
| only wireless RNDIS chip known to date. |
| |
| If you choose to build a module, it'll be called rndis_wlan. |
| |
| config VIRT_WIFI |
| tristate "Wifi wrapper for ethernet drivers" |
| depends on CFG80211 |
| help |
| This option adds support for ethernet connections to appear as if they |
| are wifi connections through a special rtnetlink device. |
| |
| endif # WLAN |