| /* |
| * Copyright (c) 2014 Redpine Signals Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/firmware.h> |
| #include <net/bluetooth/bluetooth.h> |
| #include "rsi_mgmt.h" |
| #include "rsi_hal.h" |
| #include "rsi_sdio.h" |
| #include "rsi_common.h" |
| |
| /* FLASH Firmware */ |
| static struct ta_metadata metadata_flash_content[] = { |
| {"flash_content", 0x00010000}, |
| {"rsi/rs9113_wlan_qspi.rps", 0x00010000}, |
| {"rsi/rs9113_wlan_bt_dual_mode.rps", 0x00010000}, |
| {"flash_content", 0x00010000}, |
| {"rsi/rs9113_ap_bt_dual_mode.rps", 0x00010000}, |
| |
| }; |
| |
| static struct ta_metadata metadata[] = {{"pmemdata_dummy", 0x00000000}, |
| {"rsi/rs9116_wlan.rps", 0x00000000}, |
| {"rsi/rs9116_wlan_bt_classic.rps", 0x00000000}, |
| {"rsi/pmemdata_dummy", 0x00000000}, |
| {"rsi/rs9116_wlan_bt_classic.rps", 0x00000000} |
| }; |
| |
| int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = common->priv; |
| int status; |
| |
| if (common->coex_mode > 1) |
| mutex_lock(&common->tx_bus_mutex); |
| |
| status = adapter->host_intf_ops->write_pkt(common->priv, |
| skb->data, skb->len); |
| |
| if (common->coex_mode > 1) |
| mutex_unlock(&common->tx_bus_mutex); |
| |
| return status; |
| } |
| |
| int rsi_prepare_mgmt_desc(struct rsi_common *common, struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = common->priv; |
| struct ieee80211_hdr *wh = NULL; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_conf *conf = &adapter->hw->conf; |
| struct ieee80211_vif *vif; |
| struct rsi_mgmt_desc *mgmt_desc; |
| struct skb_info *tx_params; |
| struct rsi_xtended_desc *xtend_desc = NULL; |
| u8 header_size; |
| u32 dword_align_bytes = 0; |
| |
| if (skb->len > MAX_MGMT_PKT_SIZE) { |
| rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__); |
| return -EINVAL; |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| tx_params = (struct skb_info *)info->driver_data; |
| vif = tx_params->vif; |
| |
| /* Update header size */ |
| header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc); |
| if (header_size > skb_headroom(skb)) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to add extended descriptor\n", |
| __func__); |
| return -ENOSPC; |
| } |
| skb_push(skb, header_size); |
| dword_align_bytes = ((unsigned long)skb->data & 0x3f); |
| if (dword_align_bytes > skb_headroom(skb)) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to add dword align\n", __func__); |
| return -ENOSPC; |
| } |
| skb_push(skb, dword_align_bytes); |
| header_size += dword_align_bytes; |
| |
| tx_params->internal_hdr_size = header_size; |
| memset(&skb->data[0], 0, header_size); |
| wh = (struct ieee80211_hdr *)&skb->data[header_size]; |
| |
| mgmt_desc = (struct rsi_mgmt_desc *)skb->data; |
| xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ]; |
| |
| rsi_set_len_qno(&mgmt_desc->len_qno, (skb->len - FRAME_DESC_SZ), |
| RSI_WIFI_MGMT_Q); |
| mgmt_desc->frame_type = TX_DOT11_MGMT; |
| mgmt_desc->header_len = MIN_802_11_HDR_LEN; |
| mgmt_desc->xtend_desc_size = header_size - FRAME_DESC_SZ; |
| |
| if (ieee80211_is_probe_req(wh->frame_control)) |
| mgmt_desc->frame_info = cpu_to_le16(RSI_INSERT_SEQ_IN_FW); |
| mgmt_desc->frame_info |= cpu_to_le16(RATE_INFO_ENABLE); |
| if (is_broadcast_ether_addr(wh->addr1)) |
| mgmt_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT); |
| |
| mgmt_desc->seq_ctrl = |
| cpu_to_le16(IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl))); |
| if ((common->band == NL80211_BAND_2GHZ) && !common->p2p_enabled) |
| mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_1); |
| else |
| mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_6); |
| |
| if (conf_is_ht40(conf)) |
| mgmt_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE); |
| |
| if (ieee80211_is_probe_resp(wh->frame_control)) { |
| mgmt_desc->misc_flags |= (RSI_ADD_DELTA_TSF_VAP_ID | |
| RSI_FETCH_RETRY_CNT_FRM_HST); |
| #define PROBE_RESP_RETRY_CNT 3 |
| xtend_desc->retry_cnt = PROBE_RESP_RETRY_CNT; |
| } |
| |
| if (((vif->type == NL80211_IFTYPE_AP) || |
| (vif->type == NL80211_IFTYPE_P2P_GO)) && |
| (ieee80211_is_action(wh->frame_control))) { |
| struct rsi_sta *rsta = rsi_find_sta(common, wh->addr1); |
| |
| if (rsta) |
| mgmt_desc->sta_id = tx_params->sta_id; |
| else |
| return -EINVAL; |
| } |
| mgmt_desc->rate_info |= |
| cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) & |
| RSI_DESC_VAP_ID_MASK); |
| |
| return 0; |
| } |
| |
| /* This function prepares descriptor for given data packet */ |
| int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = common->priv; |
| struct ieee80211_vif *vif; |
| struct ieee80211_hdr *wh = NULL; |
| struct ieee80211_tx_info *info; |
| struct skb_info *tx_params; |
| struct rsi_data_desc *data_desc; |
| struct rsi_xtended_desc *xtend_desc; |
| u8 ieee80211_size = MIN_802_11_HDR_LEN; |
| u8 header_size; |
| u8 vap_id = 0; |
| u8 dword_align_bytes; |
| u16 seq_num; |
| |
| info = IEEE80211_SKB_CB(skb); |
| vif = info->control.vif; |
| tx_params = (struct skb_info *)info->driver_data; |
| |
| header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc); |
| if (header_size > skb_headroom(skb)) { |
| rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__); |
| return -ENOSPC; |
| } |
| skb_push(skb, header_size); |
| dword_align_bytes = ((unsigned long)skb->data & 0x3f); |
| if (header_size > skb_headroom(skb)) { |
| rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__); |
| return -ENOSPC; |
| } |
| skb_push(skb, dword_align_bytes); |
| header_size += dword_align_bytes; |
| |
| tx_params->internal_hdr_size = header_size; |
| data_desc = (struct rsi_data_desc *)skb->data; |
| memset(data_desc, 0, header_size); |
| |
| xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ]; |
| wh = (struct ieee80211_hdr *)&skb->data[header_size]; |
| seq_num = IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl)); |
| |
| data_desc->xtend_desc_size = header_size - FRAME_DESC_SZ; |
| |
| if (ieee80211_is_data_qos(wh->frame_control)) { |
| ieee80211_size += 2; |
| data_desc->mac_flags |= cpu_to_le16(RSI_QOS_ENABLE); |
| } |
| |
| if (((vif->type == NL80211_IFTYPE_STATION) || |
| (vif->type == NL80211_IFTYPE_P2P_CLIENT)) && |
| (adapter->ps_state == PS_ENABLED)) |
| wh->frame_control |= cpu_to_le16(RSI_SET_PS_ENABLE); |
| |
| if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) && |
| info->control.hw_key) { |
| if (rsi_is_cipher_wep(common)) |
| ieee80211_size += 4; |
| else |
| ieee80211_size += 8; |
| data_desc->mac_flags |= cpu_to_le16(RSI_ENCRYPT_PKT); |
| } |
| rsi_set_len_qno(&data_desc->len_qno, (skb->len - FRAME_DESC_SZ), |
| RSI_WIFI_DATA_Q); |
| data_desc->header_len = ieee80211_size; |
| |
| if (common->min_rate != RSI_RATE_AUTO) { |
| /* Send fixed rate */ |
| data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE); |
| data_desc->rate_info = cpu_to_le16(common->min_rate); |
| |
| if (conf_is_ht40(&common->priv->hw->conf)) |
| data_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE); |
| |
| if ((common->vif_info[0].sgi) && (common->min_rate & 0x100)) { |
| /* Only MCS rates */ |
| data_desc->rate_info |= |
| cpu_to_le16(ENABLE_SHORTGI_RATE); |
| } |
| } |
| |
| if (skb->protocol == cpu_to_be16(ETH_P_PAE)) { |
| rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n"); |
| |
| data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE); |
| if (common->band == NL80211_BAND_5GHZ) |
| data_desc->rate_info = cpu_to_le16(RSI_RATE_6); |
| else |
| data_desc->rate_info = cpu_to_le16(RSI_RATE_1); |
| data_desc->mac_flags |= cpu_to_le16(RSI_REKEY_PURPOSE); |
| data_desc->misc_flags |= RSI_FETCH_RETRY_CNT_FRM_HST; |
| #define EAPOL_RETRY_CNT 15 |
| xtend_desc->retry_cnt = EAPOL_RETRY_CNT; |
| |
| if (common->eapol4_confirm) |
| skb->priority = VO_Q; |
| else |
| rsi_set_len_qno(&data_desc->len_qno, |
| (skb->len - FRAME_DESC_SZ), |
| RSI_WIFI_MGMT_Q); |
| if (((skb->len - header_size) == EAPOL4_PACKET_LEN) || |
| ((skb->len - header_size) == EAPOL4_PACKET_LEN - 2)) { |
| data_desc->misc_flags |= |
| RSI_DESC_REQUIRE_CFM_TO_HOST; |
| xtend_desc->confirm_frame_type = EAPOL4_CONFIRM; |
| } |
| } |
| |
| data_desc->mac_flags |= cpu_to_le16(seq_num & 0xfff); |
| data_desc->qid_tid = ((skb->priority & 0xf) | |
| ((tx_params->tid & 0xf) << 4)); |
| data_desc->sta_id = tx_params->sta_id; |
| |
| if ((is_broadcast_ether_addr(wh->addr1)) || |
| (is_multicast_ether_addr(wh->addr1))) { |
| data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE); |
| data_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT); |
| data_desc->sta_id = vap_id; |
| |
| if ((vif->type == NL80211_IFTYPE_AP) || |
| (vif->type == NL80211_IFTYPE_P2P_GO)) { |
| if (common->band == NL80211_BAND_5GHZ) |
| data_desc->rate_info = cpu_to_le16(RSI_RATE_6); |
| else |
| data_desc->rate_info = cpu_to_le16(RSI_RATE_1); |
| } |
| } |
| if (((vif->type == NL80211_IFTYPE_AP) || |
| (vif->type == NL80211_IFTYPE_P2P_GO)) && |
| (ieee80211_has_moredata(wh->frame_control))) |
| data_desc->frame_info |= cpu_to_le16(MORE_DATA_PRESENT); |
| |
| data_desc->rate_info |= |
| cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) & |
| RSI_DESC_VAP_ID_MASK); |
| |
| return 0; |
| } |
| |
| /* This function sends received data packet from driver to device */ |
| int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = common->priv; |
| struct ieee80211_vif *vif; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_bss_conf *bss; |
| int status = -EINVAL; |
| |
| if (!skb) |
| return 0; |
| if (common->iface_down) |
| goto err; |
| |
| info = IEEE80211_SKB_CB(skb); |
| if (!info->control.vif) |
| goto err; |
| vif = info->control.vif; |
| bss = &vif->bss_conf; |
| |
| if (((vif->type == NL80211_IFTYPE_STATION) || |
| (vif->type == NL80211_IFTYPE_P2P_CLIENT)) && |
| (!bss->assoc)) |
| goto err; |
| |
| status = rsi_send_pkt_to_bus(common, skb); |
| if (status) |
| rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", __func__); |
| |
| err: |
| ++common->tx_stats.total_tx_pkt_freed[skb->priority]; |
| rsi_indicate_tx_status(adapter, skb, status); |
| return status; |
| } |
| |
| /** |
| * rsi_send_mgmt_pkt() - This functions sends the received management packet |
| * from driver to device. |
| * @common: Pointer to the driver private structure. |
| * @skb: Pointer to the socket buffer structure. |
| * |
| * Return: status: 0 on success, -1 on failure. |
| */ |
| int rsi_send_mgmt_pkt(struct rsi_common *common, |
| struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = common->priv; |
| struct ieee80211_bss_conf *bss; |
| struct ieee80211_hdr *wh; |
| struct ieee80211_tx_info *info; |
| struct skb_info *tx_params; |
| struct rsi_mgmt_desc *mgmt_desc; |
| struct rsi_xtended_desc *xtend_desc; |
| int status = -E2BIG; |
| u8 header_size; |
| |
| info = IEEE80211_SKB_CB(skb); |
| tx_params = (struct skb_info *)info->driver_data; |
| header_size = tx_params->internal_hdr_size; |
| |
| if (tx_params->flags & INTERNAL_MGMT_PKT) { |
| status = adapter->host_intf_ops->write_pkt(common->priv, |
| (u8 *)skb->data, |
| skb->len); |
| if (status) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to write the packet\n", __func__); |
| } |
| dev_kfree_skb(skb); |
| return status; |
| } |
| |
| bss = &info->control.vif->bss_conf; |
| wh = (struct ieee80211_hdr *)&skb->data[header_size]; |
| mgmt_desc = (struct rsi_mgmt_desc *)skb->data; |
| xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ]; |
| |
| /* Indicate to firmware to give cfm for probe */ |
| if (ieee80211_is_probe_req(wh->frame_control) && !bss->assoc) { |
| rsi_dbg(INFO_ZONE, |
| "%s: blocking mgmt queue\n", __func__); |
| mgmt_desc->misc_flags = RSI_DESC_REQUIRE_CFM_TO_HOST; |
| xtend_desc->confirm_frame_type = PROBEREQ_CONFIRM; |
| common->mgmt_q_block = true; |
| rsi_dbg(INFO_ZONE, "Mgmt queue blocked\n"); |
| } |
| |
| status = rsi_send_pkt_to_bus(common, skb); |
| if (status) |
| rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__); |
| |
| rsi_indicate_tx_status(common->priv, skb, status); |
| return status; |
| } |
| |
| int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb) |
| { |
| int status = -EINVAL; |
| u8 header_size = 0; |
| struct rsi_bt_desc *bt_desc; |
| u8 queueno = ((skb->data[1] >> 4) & 0xf); |
| |
| if (queueno == RSI_BT_MGMT_Q) { |
| status = rsi_send_pkt_to_bus(common, skb); |
| if (status) |
| rsi_dbg(ERR_ZONE, "%s: Failed to write bt mgmt pkt\n", |
| __func__); |
| goto out; |
| } |
| header_size = FRAME_DESC_SZ; |
| if (header_size > skb_headroom(skb)) { |
| rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__); |
| status = -ENOSPC; |
| goto out; |
| } |
| skb_push(skb, header_size); |
| memset(skb->data, 0, header_size); |
| bt_desc = (struct rsi_bt_desc *)skb->data; |
| |
| rsi_set_len_qno(&bt_desc->len_qno, (skb->len - FRAME_DESC_SZ), |
| RSI_BT_DATA_Q); |
| bt_desc->bt_pkt_type = cpu_to_le16(bt_cb(skb)->pkt_type); |
| |
| status = rsi_send_pkt_to_bus(common, skb); |
| if (status) |
| rsi_dbg(ERR_ZONE, "%s: Failed to write bt pkt\n", __func__); |
| |
| out: |
| dev_kfree_skb(skb); |
| return status; |
| } |
| |
| int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb) |
| { |
| struct rsi_hw *adapter = (struct rsi_hw *)common->priv; |
| struct rsi_data_desc *bcn_frm; |
| struct ieee80211_hw *hw = common->priv->hw; |
| struct ieee80211_conf *conf = &hw->conf; |
| struct ieee80211_vif *vif; |
| struct sk_buff *mac_bcn; |
| u8 vap_id = 0, i; |
| u16 tim_offset = 0; |
| |
| for (i = 0; i < RSI_MAX_VIFS; i++) { |
| vif = adapter->vifs[i]; |
| if (!vif) |
| continue; |
| if ((vif->type == NL80211_IFTYPE_AP) || |
| (vif->type == NL80211_IFTYPE_P2P_GO)) |
| break; |
| } |
| if (!vif) |
| return -EINVAL; |
| mac_bcn = ieee80211_beacon_get_tim(adapter->hw, |
| vif, |
| &tim_offset, NULL); |
| if (!mac_bcn) { |
| rsi_dbg(ERR_ZONE, "Failed to get beacon from mac80211\n"); |
| return -EINVAL; |
| } |
| |
| common->beacon_cnt++; |
| bcn_frm = (struct rsi_data_desc *)skb->data; |
| rsi_set_len_qno(&bcn_frm->len_qno, mac_bcn->len, RSI_WIFI_DATA_Q); |
| bcn_frm->header_len = MIN_802_11_HDR_LEN; |
| bcn_frm->frame_info = cpu_to_le16(RSI_DATA_DESC_MAC_BBP_INFO | |
| RSI_DATA_DESC_NO_ACK_IND | |
| RSI_DATA_DESC_BEACON_FRAME | |
| RSI_DATA_DESC_INSERT_TSF | |
| RSI_DATA_DESC_INSERT_SEQ_NO | |
| RATE_INFO_ENABLE); |
| bcn_frm->rate_info = cpu_to_le16(vap_id << 14); |
| bcn_frm->qid_tid = BEACON_HW_Q; |
| |
| if (conf_is_ht40_plus(conf)) { |
| bcn_frm->bbp_info = cpu_to_le16(LOWER_20_ENABLE); |
| bcn_frm->bbp_info |= cpu_to_le16(LOWER_20_ENABLE >> 12); |
| } else if (conf_is_ht40_minus(conf)) { |
| bcn_frm->bbp_info = cpu_to_le16(UPPER_20_ENABLE); |
| bcn_frm->bbp_info |= cpu_to_le16(UPPER_20_ENABLE >> 12); |
| } |
| |
| if (common->band == NL80211_BAND_2GHZ) |
| bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_1); |
| else |
| bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_6); |
| |
| if (mac_bcn->data[tim_offset + 2] == 0) |
| bcn_frm->frame_info |= cpu_to_le16(RSI_DATA_DESC_DTIM_BEACON); |
| |
| memcpy(&skb->data[FRAME_DESC_SZ], mac_bcn->data, mac_bcn->len); |
| skb_put(skb, mac_bcn->len + FRAME_DESC_SZ); |
| |
| dev_kfree_skb(mac_bcn); |
| |
| return 0; |
| } |
| |
| static void bl_cmd_timeout(struct timer_list *t) |
| { |
| struct rsi_hw *adapter = from_timer(adapter, t, bl_cmd_timer); |
| |
| adapter->blcmd_timer_expired = true; |
| del_timer(&adapter->bl_cmd_timer); |
| } |
| |
| static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout) |
| { |
| timer_setup(&adapter->bl_cmd_timer, bl_cmd_timeout, 0); |
| adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies); |
| |
| adapter->blcmd_timer_expired = false; |
| add_timer(&adapter->bl_cmd_timer); |
| |
| return 0; |
| } |
| |
| static int bl_stop_cmd_timer(struct rsi_hw *adapter) |
| { |
| adapter->blcmd_timer_expired = false; |
| if (timer_pending(&adapter->bl_cmd_timer)) |
| del_timer(&adapter->bl_cmd_timer); |
| |
| return 0; |
| } |
| |
| static int bl_write_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, |
| u16 *cmd_resp) |
| { |
| struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops; |
| u32 regin_val = 0, regout_val = 0; |
| u32 regin_input = 0; |
| u8 output = 0; |
| int status; |
| |
| regin_input = (REGIN_INPUT | adapter->priv->coex_mode); |
| |
| while (!adapter->blcmd_timer_expired) { |
| regin_val = 0; |
| status = hif_ops->master_reg_read(adapter, SWBL_REGIN, |
| ®in_val, 2); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %0x REGIN reading failed..\n", |
| __func__, cmd); |
| return status; |
| } |
| mdelay(1); |
| if ((regin_val >> 12) != REGIN_VALID) |
| break; |
| } |
| if (adapter->blcmd_timer_expired) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %0x REGIN reading timed out..\n", |
| __func__, cmd); |
| return -ETIMEDOUT; |
| } |
| |
| rsi_dbg(INFO_ZONE, |
| "Issuing write to Regin val:%0x sending cmd:%0x\n", |
| regin_val, (cmd | regin_input << 8)); |
| status = hif_ops->master_reg_write(adapter, SWBL_REGIN, |
| (cmd | regin_input << 8), 2); |
| if (status < 0) |
| return status; |
| mdelay(1); |
| |
| if (cmd == LOAD_HOSTED_FW || cmd == JUMP_TO_ZERO_PC) { |
| /* JUMP_TO_ZERO_PC doesn't expect |
| * any response. So return from here |
| */ |
| return 0; |
| } |
| |
| while (!adapter->blcmd_timer_expired) { |
| regout_val = 0; |
| status = hif_ops->master_reg_read(adapter, SWBL_REGOUT, |
| ®out_val, 2); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %0x REGOUT reading failed..\n", |
| __func__, cmd); |
| return status; |
| } |
| mdelay(1); |
| if ((regout_val >> 8) == REGOUT_VALID) |
| break; |
| } |
| if (adapter->blcmd_timer_expired) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %0x REGOUT reading timed out..\n", |
| __func__, cmd); |
| return status; |
| } |
| |
| *cmd_resp = ((u16 *)®out_val)[0] & 0xffff; |
| |
| output = ((u8 *)®out_val)[0] & 0xff; |
| |
| status = hif_ops->master_reg_write(adapter, SWBL_REGOUT, |
| (cmd | REGOUT_INVALID << 8), 2); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %0x REGOUT writing failed..\n", |
| __func__, cmd); |
| return status; |
| } |
| mdelay(1); |
| |
| if (output != exp_resp) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Recvd resp %x for cmd %0x\n", |
| __func__, output, cmd); |
| return -EINVAL; |
| } |
| rsi_dbg(INFO_ZONE, |
| "%s: Recvd Expected resp %x for cmd %0x\n", |
| __func__, output, cmd); |
| |
| return 0; |
| } |
| |
| static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str) |
| { |
| u16 regout_val = 0; |
| u32 timeout; |
| int status; |
| |
| if ((cmd == EOF_REACHED) || (cmd == PING_VALID) || (cmd == PONG_VALID)) |
| timeout = BL_BURN_TIMEOUT; |
| else |
| timeout = BL_CMD_TIMEOUT; |
| |
| bl_start_cmd_timer(adapter, timeout); |
| status = bl_write_cmd(adapter, cmd, exp_resp, ®out_val); |
| if (status < 0) { |
| bl_stop_cmd_timer(adapter); |
| rsi_dbg(ERR_ZONE, |
| "%s: Command %s (%0x) writing failed..\n", |
| __func__, str, cmd); |
| return status; |
| } |
| bl_stop_cmd_timer(adapter); |
| return 0; |
| } |
| |
| #define CHECK_SUM_OFFSET 20 |
| #define LEN_OFFSET 8 |
| #define ADDR_OFFSET 16 |
| static int bl_write_header(struct rsi_hw *adapter, u8 *flash_content, |
| u32 content_size) |
| { |
| struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops; |
| struct bl_header *bl_hdr; |
| u32 write_addr, write_len; |
| int status; |
| |
| bl_hdr = kzalloc(sizeof(*bl_hdr), GFP_KERNEL); |
| if (!bl_hdr) |
| return -ENOMEM; |
| |
| bl_hdr->flags = 0; |
| bl_hdr->image_no = cpu_to_le32(adapter->priv->coex_mode); |
| bl_hdr->check_sum = |
| cpu_to_le32(*(u32 *)&flash_content[CHECK_SUM_OFFSET]); |
| bl_hdr->flash_start_address = |
| cpu_to_le32(*(u32 *)&flash_content[ADDR_OFFSET]); |
| bl_hdr->flash_len = cpu_to_le32(*(u32 *)&flash_content[LEN_OFFSET]); |
| write_len = sizeof(struct bl_header); |
| |
| if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) { |
| write_addr = PING_BUFFER_ADDRESS; |
| status = hif_ops->write_reg_multiple(adapter, write_addr, |
| (u8 *)bl_hdr, write_len); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to load Version/CRC structure\n", |
| __func__); |
| goto fail; |
| } |
| } else { |
| write_addr = PING_BUFFER_ADDRESS >> 16; |
| status = hif_ops->master_access_msword(adapter, write_addr); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Unable to set ms word to common reg\n", |
| __func__); |
| goto fail; |
| } |
| write_addr = RSI_SD_REQUEST_MASTER | |
| (PING_BUFFER_ADDRESS & 0xFFFF); |
| status = hif_ops->write_reg_multiple(adapter, write_addr, |
| (u8 *)bl_hdr, write_len); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to load Version/CRC structure\n", |
| __func__); |
| goto fail; |
| } |
| } |
| status = 0; |
| fail: |
| kfree(bl_hdr); |
| return status; |
| } |
| |
| static u32 read_flash_capacity(struct rsi_hw *adapter) |
| { |
| u32 flash_sz = 0; |
| |
| if ((adapter->host_intf_ops->master_reg_read(adapter, FLASH_SIZE_ADDR, |
| &flash_sz, 2)) < 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Flash size reading failed..\n", |
| __func__); |
| return 0; |
| } |
| rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz); |
| |
| return (flash_sz * 1024); /* Return size in kbytes */ |
| } |
| |
| static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size) |
| { |
| struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops; |
| u32 block_size = adapter->block_size; |
| u32 cmd_addr; |
| u16 cmd_resp, cmd_req; |
| u8 *str; |
| int status; |
| |
| if (cmd == PING_WRITE) { |
| cmd_addr = PING_BUFFER_ADDRESS; |
| cmd_resp = PONG_AVAIL; |
| cmd_req = PING_VALID; |
| str = "PING_VALID"; |
| } else { |
| cmd_addr = PONG_BUFFER_ADDRESS; |
| cmd_resp = PING_AVAIL; |
| cmd_req = PONG_VALID; |
| str = "PONG_VALID"; |
| } |
| |
| status = hif_ops->load_data_master_write(adapter, cmd_addr, size, |
| block_size, addr); |
| if (status) { |
| rsi_dbg(ERR_ZONE, "%s: Unable to write blk at addr %0x\n", |
| __func__, *addr); |
| return status; |
| } |
| |
| status = bl_cmd(adapter, cmd_req, cmd_resp, str); |
| if (status) |
| return status; |
| |
| return 0; |
| } |
| |
| static int auto_fw_upgrade(struct rsi_hw *adapter, u8 *flash_content, |
| u32 content_size) |
| { |
| u8 cmd; |
| u32 temp_content_size, num_flash, index; |
| u32 flash_start_address; |
| int status; |
| |
| if (content_size > MAX_FLASH_FILE_SIZE) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Flash Content size is more than 400K %u\n", |
| __func__, MAX_FLASH_FILE_SIZE); |
| return -EINVAL; |
| } |
| |
| flash_start_address = *(u32 *)&flash_content[FLASH_START_ADDRESS]; |
| rsi_dbg(INFO_ZONE, "flash start address: %08x\n", flash_start_address); |
| |
| if (flash_start_address < FW_IMAGE_MIN_ADDRESS) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Fw image Flash Start Address is less than 64K\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| if (flash_start_address % FLASH_SECTOR_SIZE) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Flash Start Address is not multiple of 4K\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| if ((flash_start_address + content_size) > adapter->flash_capacity) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Flash Content will cross max flash size\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| temp_content_size = content_size; |
| num_flash = content_size / FLASH_WRITE_CHUNK_SIZE; |
| |
| rsi_dbg(INFO_ZONE, "content_size: %d, num_flash: %d\n", |
| content_size, num_flash); |
| |
| for (index = 0; index <= num_flash; index++) { |
| rsi_dbg(INFO_ZONE, "flash index: %d\n", index); |
| if (index != num_flash) { |
| content_size = FLASH_WRITE_CHUNK_SIZE; |
| rsi_dbg(INFO_ZONE, "QSPI content_size:%d\n", |
| content_size); |
| } else { |
| content_size = |
| temp_content_size % FLASH_WRITE_CHUNK_SIZE; |
| rsi_dbg(INFO_ZONE, |
| "Writing last sector content_size:%d\n", |
| content_size); |
| if (!content_size) { |
| rsi_dbg(INFO_ZONE, "instruction size zero\n"); |
| break; |
| } |
| } |
| |
| if (index % 2) |
| cmd = PING_WRITE; |
| else |
| cmd = PONG_WRITE; |
| |
| status = ping_pong_write(adapter, cmd, flash_content, |
| content_size); |
| if (status) { |
| rsi_dbg(ERR_ZONE, "%s: Unable to load %d block\n", |
| __func__, index); |
| return status; |
| } |
| |
| rsi_dbg(INFO_ZONE, |
| "%s: Successfully loaded %d instructions\n", |
| __func__, index); |
| flash_content += content_size; |
| } |
| |
| status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL, |
| "EOF_REACHED"); |
| if (status) |
| return status; |
| |
| rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n"); |
| return 0; |
| } |
| |
| static int rsi_hal_prepare_fwload(struct rsi_hw *adapter) |
| { |
| struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops; |
| u32 regout_val = 0; |
| int status; |
| |
| bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT); |
| |
| while (!adapter->blcmd_timer_expired) { |
| status = hif_ops->master_reg_read(adapter, SWBL_REGOUT, |
| ®out_val, |
| RSI_COMMON_REG_SIZE); |
| if (status < 0) { |
| bl_stop_cmd_timer(adapter); |
| rsi_dbg(ERR_ZONE, |
| "%s: REGOUT read failed\n", __func__); |
| return status; |
| } |
| mdelay(1); |
| if ((regout_val >> 8) == REGOUT_VALID) |
| break; |
| } |
| if (adapter->blcmd_timer_expired) { |
| rsi_dbg(ERR_ZONE, "%s: REGOUT read timedout\n", __func__); |
| rsi_dbg(ERR_ZONE, |
| "%s: Soft boot loader not present\n", __func__); |
| return -ETIMEDOUT; |
| } |
| bl_stop_cmd_timer(adapter); |
| |
| rsi_dbg(INFO_ZONE, "Received Board Version Number: %x\n", |
| (regout_val & 0xff)); |
| |
| status = hif_ops->master_reg_write(adapter, SWBL_REGOUT, |
| (REGOUT_INVALID | |
| REGOUT_INVALID << 8), |
| RSI_COMMON_REG_SIZE); |
| if (status < 0) |
| rsi_dbg(ERR_ZONE, "%s: REGOUT writing failed..\n", __func__); |
| else |
| rsi_dbg(INFO_ZONE, |
| "===> Device is ready to load firmware <===\n"); |
| |
| return status; |
| } |
| |
| static int rsi_load_9113_firmware(struct rsi_hw *adapter) |
| { |
| struct rsi_common *common = adapter->priv; |
| const struct firmware *fw_entry = NULL; |
| u32 content_size; |
| u16 tmp_regout_val = 0; |
| struct ta_metadata *metadata_p; |
| int status; |
| |
| status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS, |
| "AUTO_READ_CMD"); |
| if (status < 0) |
| return status; |
| |
| adapter->flash_capacity = read_flash_capacity(adapter); |
| if (adapter->flash_capacity <= 0) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Unable to read flash size from EEPROM\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| metadata_p = &metadata_flash_content[adapter->priv->coex_mode]; |
| |
| rsi_dbg(INIT_ZONE, "%s: Loading file %s\n", __func__, metadata_p->name); |
| adapter->fw_file_name = metadata_p->name; |
| |
| status = request_firmware(&fw_entry, metadata_p->name, adapter->device); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n", |
| __func__, metadata_p->name); |
| return status; |
| } |
| content_size = fw_entry->size; |
| rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", content_size); |
| |
| /* Get the firmware version */ |
| common->lmac_ver.ver.info.fw_ver[0] = |
| fw_entry->data[LMAC_VER_OFFSET_9113] & 0xFF; |
| common->lmac_ver.ver.info.fw_ver[1] = |
| fw_entry->data[LMAC_VER_OFFSET_9113 + 1] & 0xFF; |
| common->lmac_ver.major = |
| fw_entry->data[LMAC_VER_OFFSET_9113 + 2] & 0xFF; |
| common->lmac_ver.release_num = |
| fw_entry->data[LMAC_VER_OFFSET_9113 + 3] & 0xFF; |
| common->lmac_ver.minor = |
| fw_entry->data[LMAC_VER_OFFSET_9113 + 4] & 0xFF; |
| common->lmac_ver.patch_num = 0; |
| rsi_print_version(common); |
| |
| status = bl_write_header(adapter, (u8 *)fw_entry->data, content_size); |
| if (status) { |
| rsi_dbg(ERR_ZONE, |
| "%s: RPS Image header loading failed\n", |
| __func__); |
| goto fail; |
| } |
| |
| bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT); |
| status = bl_write_cmd(adapter, CHECK_CRC, CMD_PASS, &tmp_regout_val); |
| if (status) { |
| bl_stop_cmd_timer(adapter); |
| rsi_dbg(ERR_ZONE, |
| "%s: CHECK_CRC Command writing failed..\n", |
| __func__); |
| if ((tmp_regout_val & 0xff) == CMD_FAIL) { |
| rsi_dbg(ERR_ZONE, |
| "CRC Fail.. Proceeding to Upgrade mode\n"); |
| goto fw_upgrade; |
| } |
| } |
| bl_stop_cmd_timer(adapter); |
| |
| status = bl_cmd(adapter, POLLING_MODE, CMD_PASS, "POLLING_MODE"); |
| if (status) |
| goto fail; |
| |
| load_image_cmd: |
| status = bl_cmd(adapter, LOAD_HOSTED_FW, LOADING_INITIATED, |
| "LOAD_HOSTED_FW"); |
| if (status) |
| goto fail; |
| rsi_dbg(INFO_ZONE, "Load Image command passed..\n"); |
| goto success; |
| |
| fw_upgrade: |
| status = bl_cmd(adapter, BURN_HOSTED_FW, SEND_RPS_FILE, "FW_UPGRADE"); |
| if (status) |
| goto fail; |
| |
| rsi_dbg(INFO_ZONE, "Burn Command Pass.. Upgrading the firmware\n"); |
| |
| status = auto_fw_upgrade(adapter, (u8 *)fw_entry->data, content_size); |
| if (status == 0) { |
| rsi_dbg(ERR_ZONE, "Firmware upgradation Done\n"); |
| goto load_image_cmd; |
| } |
| rsi_dbg(ERR_ZONE, "Firmware upgrade failed\n"); |
| |
| status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS, |
| "AUTO_READ_MODE"); |
| if (status) |
| goto fail; |
| |
| success: |
| rsi_dbg(ERR_ZONE, "***** Firmware Loading successful *****\n"); |
| release_firmware(fw_entry); |
| return 0; |
| |
| fail: |
| rsi_dbg(ERR_ZONE, "##### Firmware loading failed #####\n"); |
| release_firmware(fw_entry); |
| return status; |
| } |
| |
| static int rsi_load_9116_firmware(struct rsi_hw *adapter) |
| { |
| struct rsi_common *common = adapter->priv; |
| struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops; |
| const struct firmware *fw_entry; |
| struct ta_metadata *metadata_p; |
| u8 *ta_firmware, *fw_p; |
| struct bootload_ds bootload_ds; |
| u32 instructions_sz, base_address; |
| u16 block_size = adapter->block_size; |
| u32 dest, len; |
| int status, cnt; |
| |
| rsi_dbg(INIT_ZONE, "***** Load 9116 TA Instructions *****\n"); |
| |
| if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) { |
| status = bl_cmd(adapter, POLLING_MODE, CMD_PASS, |
| "POLLING_MODE"); |
| if (status < 0) |
| return status; |
| } |
| |
| status = hif_ops->master_reg_write(adapter, MEM_ACCESS_CTRL_FROM_HOST, |
| RAM_384K_ACCESS_FROM_TA, |
| RSI_9116_REG_SIZE); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, "%s: Unable to access full RAM memory\n", |
| __func__); |
| return status; |
| } |
| |
| metadata_p = &metadata[adapter->priv->coex_mode]; |
| rsi_dbg(INIT_ZONE, "%s: loading file %s\n", __func__, metadata_p->name); |
| status = request_firmware(&fw_entry, metadata_p->name, adapter->device); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n", |
| __func__, metadata_p->name); |
| return status; |
| } |
| |
| ta_firmware = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); |
| if (!ta_firmware) { |
| status = -ENOMEM; |
| goto fail_release_fw; |
| } |
| fw_p = ta_firmware; |
| instructions_sz = fw_entry->size; |
| rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", instructions_sz); |
| |
| common->lmac_ver.major = ta_firmware[LMAC_VER_OFFSET_9116]; |
| common->lmac_ver.minor = ta_firmware[LMAC_VER_OFFSET_9116 + 1]; |
| common->lmac_ver.release_num = ta_firmware[LMAC_VER_OFFSET_9116 + 2]; |
| common->lmac_ver.patch_num = ta_firmware[LMAC_VER_OFFSET_9116 + 3]; |
| common->lmac_ver.ver.info.fw_ver[0] = |
| ta_firmware[LMAC_VER_OFFSET_9116 + 4]; |
| |
| if (instructions_sz % FW_ALIGN_SIZE) |
| instructions_sz += |
| (FW_ALIGN_SIZE - (instructions_sz % FW_ALIGN_SIZE)); |
| rsi_dbg(INFO_ZONE, "instructions_sz : %d\n", instructions_sz); |
| |
| if (*(u16 *)fw_p == RSI_9116_FW_MAGIC_WORD) { |
| memcpy(&bootload_ds, fw_p, sizeof(struct bootload_ds)); |
| fw_p += le16_to_cpu(bootload_ds.offset); |
| rsi_dbg(INFO_ZONE, "FW start = %x\n", *(u32 *)fw_p); |
| |
| cnt = 0; |
| do { |
| rsi_dbg(ERR_ZONE, "%s: Loading chunk %d\n", |
| __func__, cnt); |
| |
| dest = le32_to_cpu(bootload_ds.bl_entry[cnt].dst_addr); |
| len = le32_to_cpu(bootload_ds.bl_entry[cnt].control) & |
| RSI_BL_CTRL_LEN_MASK; |
| rsi_dbg(INFO_ZONE, "length %d destination %x\n", |
| len, dest); |
| |
| status = hif_ops->load_data_master_write(adapter, dest, |
| len, |
| block_size, |
| fw_p); |
| if (status < 0) { |
| rsi_dbg(ERR_ZONE, |
| "Failed to load chunk %d\n", cnt); |
| break; |
| } |
| fw_p += len; |
| if (le32_to_cpu(bootload_ds.bl_entry[cnt].control) & |
| RSI_BL_CTRL_LAST_ENTRY) |
| break; |
| cnt++; |
| } while (1); |
| } else { |
| base_address = metadata_p->address; |
| status = hif_ops->load_data_master_write(adapter, |
| base_address, |
| instructions_sz, |
| block_size, |
| ta_firmware); |
| } |
| if (status) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Unable to load %s blk\n", |
| __func__, metadata_p->name); |
| goto fail_free_fw; |
| } |
| |
| rsi_dbg(INIT_ZONE, "%s: Successfully loaded %s instructions\n", |
| __func__, metadata_p->name); |
| |
| if (adapter->rsi_host_intf == RSI_HOST_INTF_SDIO) { |
| if (hif_ops->ta_reset(adapter)) |
| rsi_dbg(ERR_ZONE, "Unable to put ta in reset\n"); |
| } else { |
| if (bl_cmd(adapter, JUMP_TO_ZERO_PC, |
| CMD_PASS, "JUMP_TO_ZERO") < 0) |
| rsi_dbg(INFO_ZONE, "Jump to zero command failed\n"); |
| else |
| rsi_dbg(INFO_ZONE, "Jump to zero command successful\n"); |
| } |
| |
| fail_free_fw: |
| kfree(ta_firmware); |
| fail_release_fw: |
| release_firmware(fw_entry); |
| |
| return status; |
| } |
| |
| int rsi_hal_device_init(struct rsi_hw *adapter) |
| { |
| struct rsi_common *common = adapter->priv; |
| int status; |
| |
| switch (adapter->device_model) { |
| case RSI_DEV_9113: |
| status = rsi_hal_prepare_fwload(adapter); |
| if (status < 0) |
| return status; |
| if (rsi_load_9113_firmware(adapter)) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to load TA instructions\n", |
| __func__); |
| return -EINVAL; |
| } |
| break; |
| case RSI_DEV_9116: |
| status = rsi_hal_prepare_fwload(adapter); |
| if (status < 0) |
| return status; |
| if (rsi_load_9116_firmware(adapter)) { |
| rsi_dbg(ERR_ZONE, |
| "%s: Failed to load firmware to 9116 device\n", |
| __func__); |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| common->fsm_state = FSM_CARD_NOT_READY; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(rsi_hal_device_init); |
| |