| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS) |
| |
| maintainers: |
| - Krzysztof Kozlowski <krzk@kernel.org> |
| - Sylwester Nawrocki <s.nawrocki@samsung.com> |
| |
| properties: |
| compatible: |
| const: samsung,exynos5433-lpass |
| |
| '#address-cells': |
| const: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: sfr0_ctrl |
| |
| power-domains: |
| maxItems: 1 |
| |
| ranges: true |
| |
| reg: |
| minItems: 2 |
| maxItems: 2 |
| |
| '#size-cells': |
| const: 1 |
| |
| patternProperties: |
| "^dma-controller@[0-9a-f]+$": |
| $ref: /schemas/dma/arm,pl330.yaml |
| |
| "^i2s@[0-9a-f]+$": |
| $ref: /schemas/sound/samsung-i2s.yaml |
| |
| "^serial@[0-9a-f]+$": |
| $ref: /schemas/serial/samsung_uart.yaml |
| |
| required: |
| - compatible |
| - '#address-cells' |
| - clocks |
| - clock-names |
| - ranges |
| - reg |
| - '#size-cells' |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/exynos5433.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| audio-subsystem@11400000 { |
| compatible = "samsung,exynos5433-lpass"; |
| reg = <0x11400000 0x100>, <0x11500000 0x08>; |
| clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; |
| clock-names = "sfr0_ctrl"; |
| power-domains = <&pd_aud>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dma-controller@11420000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x11420000 0x1000>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_aud CLK_ACLK_DMAC>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| dma-channels = <8>; |
| dma-requests = <32>; |
| power-domains = <&pd_aud>; |
| }; |
| |
| i2s@11440000 { |
| compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; |
| reg = <0x11440000 0x100>; |
| dmas = <&adma 0>, <&adma 2>; |
| dma-names = "tx", "rx"; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, |
| <&cmu_aud CLK_SCLK_AUD_I2S>, |
| <&cmu_aud CLK_SCLK_I2S_BCLK>; |
| clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| #clock-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| power-domains = <&pd_aud>; |
| #sound-dai-cells = <1>; |
| }; |
| |
| serial@11460000 { |
| compatible = "samsung,exynos5433-uart"; |
| reg = <0x11460000 0x100>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_aud CLK_PCLK_AUD_UART>, |
| <&cmu_aud CLK_SCLK_AUD_UART>; |
| clock-names = "uart", "clk_uart_baud0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_aud_bus>; |
| power-domains = <&pd_aud>; |
| }; |
| }; |