blob: b4680a1d0a068ed6c5d128c503ee5c2da9dfa476 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas Ethernet TSN End-station
maintainers:
- Niklas Söderlund <niklas.soderlund@ragnatech.se>
description:
The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1
Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY.
allOf:
- $ref: ethernet-controller.yaml#
properties:
compatible:
items:
- enum:
- renesas,r8a779g0-ethertsn # R-Car V4H
- const: renesas,rcar-gen4-ethertsn
reg:
items:
- description: TSN End Station target
- description: generalized Precision Time Protocol target
reg-names:
items:
- const: tsnes
- const: gptp
interrupts:
items:
- description: TX data interrupt
- description: RX data interrupt
interrupt-names:
items:
- const: tx
- const: rx
clocks:
maxItems: 1
power-domains:
maxItems: 1
resets:
maxItems: 1
phy-mode:
contains:
enum:
- mii
- rgmii
phy-handle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a PHY device.
rx-internal-delay-ps:
enum: [0, 1800]
default: 0
tx-internal-delay-ps:
enum: [0, 2000]
default: 0
mdio:
$ref: /schemas/net/mdio.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
- reg-names
- interrupts
- interrupt-names
- clocks
- power-domains
- resets
- phy-mode
- phy-handle
- mdio
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a779g0-sysc.h>
#include <dt-bindings/gpio/gpio.h>
tsn0: ethernet@e6460000 {
compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn";
reg = <0xe6460000 0x7000>,
<0xe6449000 0x500>;
reg-names = "tsnes", "gptp";
interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
clocks = <&cpg CPG_MOD 2723>;
power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
resets = <&cpg 2723>;
phy-mode = "rgmii";
tx-internal-delay-ps = <2000>;
phy-handle = <&phy3>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
reset-post-delay-us = <4000>;
phy3: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
};
};
};