Merge branch 'next/board' of git://git.linaro.org/people/arnd/arm-soc
* 'next/board' of git://git.linaro.org/people/arnd/arm-soc: (34 commits)
ep93xx: add support Vision EP9307 SoM
ARM: mxs: Add initial support for DENX MX28
ARM: EXYNOS4: Add support SMDK4412 Board
ARM: EXYNOS4: Add MCT support for EXYNOS4412
ARM: EXYNOS4: Add functions for gic interrupt handling
ARM: EXYNOS4: Add support clock for EXYNOS4412
ARM: EXYNOS4: Add support new EXYNOS4412 SoC
ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212
ARM: EXYNOS4: Add support PPI in external GIC
ARM: EXYNOS4: convert boot_params to atag_offset
ixp4xx: support omicron ixp425 based boards
ARM: EXYNOS4: Add support SMDK4212 Board
ARM: EXYNOS4: Add support PM for EXYNOS4212
ARM: EXYNOS4: Add support clock for EXYNOS4212
ARM: EXYNOS4: Add support new EXYNOS4212 SoC
at91: USB-A9G20 C01 & C11 board support
at91: merge board USB-A9260 and USB-A9263 together
at91: add support for RSIs EWS board
ARM: SAMSUNG: Fix mask value for S5P64X0 CPU IDs
ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs
...
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3..cd40bb5 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d..6ee781b 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..04a85c5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@
help
Select this if you are using the eco920 board
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
@@ -381,6 +386,14 @@
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..d992dd5 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
@@ -53,7 +54,7 @@
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 0000000..e927df0
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ * Copyright (C)
+ * 2005 SAN People,
+ * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+ .ports = 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("24c01", 0x50),
+ }
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB6,
+ .active_low = 0,
+ },
+ {
+ .name = "led1",
+ .gpio = AT91_PIN_PB7,
+ .active_low = 0,
+ },
+ {
+ .name = "led2",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 0,
+ },
+ {
+ .name = "led3",
+ .gpio = AT91_PIN_PB9,
+ .active_low = 0,
+ },
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+ { /* DataFlash chip 1*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+ { /* DataFlash chip 2*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M - (3 * SZ_128K)
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_8M
+ },
+ {
+ .name = "kernelupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "rootupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 9 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+ .width = 2,
+ .parts = rsiews_nor_partitions,
+ .nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_16M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rsiews_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rsiews_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ /* Ethernet */
+ at91_add_device_eth(&rsi_ews_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&rsi_ews_usbh_data);
+ /* I2C */
+ at91_add_device_i2c(rsi_ews_i2c_devices,
+ ARRAY_SIZE(rsi_ews_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(rsi_ews_spi_devices,
+ ARRAY_SIZE(rsi_ews_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ /* NOR Flash */
+ platform_device_register(&rsiews_nor_flash);
+ /* LEDs */
+ at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+ /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = rsi_ews_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index bac9b65..0000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Uboot & Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 0,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
deleted file mode 100644
index 5bd7357..0000000
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.00 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB11,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- }
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Linux Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
new file mode 100644
index 0000000..5852d3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 Calao-systems
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.00 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB11,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+static void __init ek_add_device_udc(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+ at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+ irqreturn_t (*detect_int)(int, void *), void *data)
+{
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+ return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+ .init = at91_mmc_spi_init,
+ .exit = at91_mmc_spi_exit,
+ .detect_delay = 100, /* msecs */
+};
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info usb_a9263_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ }
+#endif
+};
+
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &at91_mmc_spi_pdata,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+ if (machine_is_usb_a9263())
+ at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+ else if (machine_is_usb_a9g20())
+ at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+};
+
+static void __init ek_add_device_eth(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+ at91_add_device_eth(&ek_macb_data);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "barebox",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ }, {
+ .name = "bareboxenv",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "bareboxenv2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 4 * SZ_1M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+};
+
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+ ek_nand_data.rdy_pin = AT91_PIN_PC13;
+ ek_nand_data.enable_pin = AT91_PIN_PC14;
+ }
+
+ /* configure chip-select 3 (NAND) */
+ if (machine_is_usb_a9g20())
+ sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ else
+ sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rv3029c2", 0x56),
+ },
+};
+
+static void __init ek_add_device_leds(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_leds[0].active_low = 0;
+
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ ek_add_device_udc();
+ /* SPI */
+ ek_add_device_spi();
+ /* Ethernet */
+ ek_add_device_eth();
+ /* NAND */
+ ek_add_device_nand();
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ ek_add_device_leds();
+
+ if (machine_is_usb_a9g20()) {
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ } else {
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+ | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+ }
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+ /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..85820ad 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK 133000000
+#else
#define AT91SAM9_MASTER_CLOCK 132096000
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18..97a2493 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
+config MACH_VISION_EP9307
+ bool "Support Vision Engraving Systems EP9307 SoM"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Vision Engraving Systems EP9307 SoM.
+
choice
prompt "Select a UART for early kernel messages"
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2..574209d9 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 0000000..d96e4db
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE 0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+ {
+ .virtual = VISION_VIRT_BASE,
+ .pfn = __phys_to_pfn(VISION_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init vision_map_io(void)
+{
+ ep93xx_map_io();
+
+ iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+ int err;
+
+ err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+ EP93XX_SYSCON_DEVCFG_RASONP3 |
+ EP93XX_SYSCON_DEVCFG_EXVC);
+
+ return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+ gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+ if (blank_mode)
+ gpio_set_value(VISION_LCD_ENABLE, 0);
+ else
+ gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+ .setup = vision_lcd_setup,
+ .teardown = vision_lcd_teardown,
+ .blank = vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+ .gpio_base = PCA9539_74_GPIO_BASE,
+ .irq_base = EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+ .gpio_base = PCA9539_75_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+ .gpio_base = PCA9539_76_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+ .gpio_base = PCA9539_77_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = IRQ_EP93XX_EXT1,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &pca953x_74_gpio_data,
+ .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x75),
+ .platform_data = &pca953x_75_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x76),
+ .platform_data = &pca953x_76_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x77),
+ .platform_data = &pca953x_77_gpio_data,
+ },
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+ {
+ .name = "SPI bootstrap",
+ .offset = 0,
+ .size = SZ_4K,
+ }, {
+ .name = "Bootstrap config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4K,
+ }, {
+ .name = "System config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+ .name = "SPI Flash",
+ .parts = vision_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+ .setup = vision_spi_flash_hw_setup,
+ .cleanup = vision_spi_flash_hw_cleanup,
+ .cs_control = vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+ { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+ { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+ irqreturn_t (*func)(int, void *), void *pdata)
+{
+ int err;
+
+ err = gpio_request_array(vision_spi_mmc_gpios,
+ ARRAY_SIZE(vision_spi_mmc_gpios));
+ if (err)
+ return err;
+
+ err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+ if (err)
+ goto exit_err;
+
+ err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+ IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+ if (err)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+ return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+ free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+ return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+ return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+ .init = vision_spi_mmc_init,
+ .exit = vision_spi_mmc_exit,
+ .get_ro = vision_spi_mmc_get_ro,
+ .get_cd = vision_spi_mmc_get_cd,
+ .detect_delay = 100,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+ .setup = vision_spi_mmc_hw_setup,
+ .cleanup = vision_spi_mmc_hw_cleanup,
+ .cs_control = vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+ {
+ .modalias = "sst25l",
+ .platform_data = &vision_spi_flash_data,
+ .controller_data = &vision_spi_flash_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "mmc_spi",
+ .platform_data = &vision_spi_mmc_data,
+ .controller_data = &vision_spi_mmc_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+ .num_chipselect = ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+ ep93xx_register_eth(&vision_eth_data, 1);
+ ep93xx_register_fb(&ep93xxfb_info);
+ ep93xx_register_pwm(1, 0);
+
+ /*
+ * Request the gpio expander's interrupt gpio line now to prevent
+ * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+ */
+ if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+ "pca9539:74"))
+ pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+ ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+ ARRAY_SIZE(vision_i2c_info));
+ ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+ ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .map_io = vision_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 1760ee7..a652735 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -16,6 +16,16 @@
help
Enable EXYNOS4210 CPU support
+config SOC_EXYNOS4212
+ bool
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool
+ help
+ Enable EXYNOS4412 SoC support
+
config EXYNOS4_MCT
bool
default y
@@ -112,6 +122,8 @@
menu "EXYNOS4 Machines"
+comment "EXYNOS4210 Boards"
+
config MACH_SMDKC210
bool "SMDKC210"
select MACH_SMDKV310
@@ -204,6 +216,48 @@
help
Machine support for Samsung Mobile NURI Board.
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC2
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+
endmenu
comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index e3e93ea..c9b2e1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@
# Core support for EXYNOS4 system
-obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@@ -30,6 +32,10 @@
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
# device support
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 0000000..b9d5ef6
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKSRC_LCD1),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_LCD1),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+ /* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "sataphy",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+ return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+ .suspend = exynos4210_clock_suspend,
+ .resume = exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+ int ptr;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+ clk_mout_mpll.reg_src.shift = 8;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 0000000..77d5dec
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+ .sources = clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &clk_src_mpll_user,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+ /* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+ /* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+ return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+ .suspend = exynos4212_clock_suspend,
+ .resume = exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+ int ptr;
+
+ /* usbphy1 is removed */
+ clkset_group_list[4] = NULL;
+
+ /* mout_mpll_user is used */
+ clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+ clk_mout_mpll.reg_src.shift = 12;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 86964d2..0d59be3 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -20,26 +21,93 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
-static struct clk clk_sclk_hdmi27m = {
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
@@ -58,12 +126,7 @@
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
@@ -103,12 +166,12 @@
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
@@ -133,7 +196,7 @@
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
@@ -141,7 +204,7 @@
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
@@ -149,12 +212,13 @@
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+ /* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@
/* Core list of CMU_CORE side */
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
@@ -284,12 +348,12 @@
/* Core list of CMU_TOP side */
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
@@ -321,7 +385,7 @@
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
@@ -360,7 +424,7 @@
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
@@ -410,16 +474,6 @@
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sataphy",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
@@ -449,11 +503,6 @@
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
.name = "pdma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@
}
};
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@
[8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
@@ -967,25 +1016,6 @@
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
@@ -1114,7 +1144,13 @@
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
@@ -1124,10 +1160,10 @@
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
@@ -1151,14 +1187,29 @@
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
@@ -1193,6 +1244,28 @@
/* Nothing here yet */
};
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
void __init exynos4_register_clocks(void)
{
int ptr;
@@ -1208,5 +1281,6 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ register_syscore_ops(&exynos4_clock_syscore_ops);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc..a348434 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
+unsigned int gic_bank_offset __read_mostly;
+
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -121,6 +118,24 @@
},
};
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static void exynos4_idle(void)
{
if (!need_resched())
@@ -143,6 +158,11 @@
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@@ -170,24 +190,37 @@
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
exynos4_register_clocks();
exynos4_setup_clocks();
}
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
@@ -223,7 +256,11 @@
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
/* L2X0 Prefetch Control */
__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 006a4f4..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
+ mov \tmp, #0
+
+ mrc p15, 0, \base, c0, c0, 5
+ and \base, \base, #3
+ cmp \base, #0
+ beq 1f
+
+ ldr \tmp, =gic_bank_offset
+ ldr \tmp, [\tmp]
+ cmp \base, #1
+ beq 1f
+
+ cmp \base, #2
+ addeq \tmp, \tmp, \tmp
+ addne \tmp, \tmp, \tmp, LSL #1
+
+1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
- mrc p15, 0, \tmp, c0, c0, 5
- and \tmp, \tmp, #3
- cmp \tmp, #1
- addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+ add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 0000000..a07fcbf
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..2d3f6bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..9f97eb8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -61,7 +62,6 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb..6c37ebe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+#include <plat/cpu.h>
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
-
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C930) : \
+ S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C960) : \
+ S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14004) : \
+ S5P_CLKREG(0x10008))
#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14108) : \
+ S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x1410C) : \
+ S5P_CLKREG(0x1010C))
#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c843..80dd02a 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 0000000..b5f6f38
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 0000000..fcf2e0e
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+ REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_SMDK4X12",
+ .min_uV = 925000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
+ .regulators = smdk4x12_max8997_regulators,
+
+ .buck1_voltage[0] = 1100000, /* 1.1V */
+ .buck1_voltage[1] = 1100000, /* 1.1V */
+ .buck1_voltage[2] = 1100000, /* 1.1V */
+ .buck1_voltage[3] = 1100000, /* 1.1V */
+ .buck1_voltage[4] = 1100000, /* 1.1V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1100000, /* 1.1V */
+ .buck5_voltage[1] = 1100000, /* 1.1V */
+ .buck5_voltage[2] = 1100000, /* 1.1V */
+ .buck5_voltage[3] = 1100000, /* 1.1V */
+ .buck5_voltage[4] = 1100000, /* 1.1V */
+ .buck5_voltage[5] = 1100000, /* 1.1V */
+ .buck5_voltage[6] = 1100000, /* 1.1V */
+ .buck5_voltage[7] = 1100000, /* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", 0x66),
+ .platform_data = &smdk4x12_max8997_pdata,
+ }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+ KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+ .keymap = smdk4x12_keymap,
+ .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+ .keymap_data = &smdk4x12_keymap_data,
+ .rows = 2,
+ .cols = 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c3,
+ &s3c_device_i2c7,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+ clk_xusbxti.rate = 24000000;
+
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
+ s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, smdk4x12_i2c_devs0,
+ ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, smdk4x12_i2c_devs1,
+ ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, smdk4x12_i2c_devs3,
+ ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+ s3c_i2c7_set_platdata(NULL);
+ i2c_register_board_info(7, smdk4x12_i2c_devs7,
+ ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+ samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+ samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+ s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+ platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 582b874..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
#include <linux/delay.h>
#include <linux/percpu.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
+static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
+ char name[10];
};
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
static void exynos4_mct_write(unsigned int value, void *addr)
{
@@ -42,57 +54,53 @@
__raw_writel(value, addr);
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 16; /* G_TCON write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 0; /* G_COMP0_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 1; /* G_COMP0_U write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 0; /* G_CNT_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 1; /* G_CNT_U write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L0_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L1_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L0_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L1_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L0_ICNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L1_ICNTB write status */
- break;
- default:
- return;
+ if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+ u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+ switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+ case (u32) MCT_L_TCON_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case (u32) MCT_L_ICNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case (u32) MCT_L_TCNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
}
/* Wait maximum 1 ms until written values are applied */
@@ -321,9 +329,8 @@
}
}
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
- struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
/*
@@ -335,7 +342,20 @@
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
@@ -360,14 +380,10 @@
mct_tick[cpu].evt = evt;
- if (cpu == 0) {
- mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
- evt->name = "mct_tick0";
- } else {
- mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
- evt->name = "mct_tick1";
- }
+ mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+ evt->name = mct_tick[cpu].name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
@@ -384,15 +400,19 @@
exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
- if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ if (mct_int_type == MCT_INT_SPI) {
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ }
} else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ gic_enable_ppi(IRQ_MCT_LOCALTIMER);
}
}
@@ -422,6 +442,11 @@
static void __init exynos4_timer_init(void)
{
+ if (soc_is_exynos4210())
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 0c90896..782dcf1 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@
static void __cpuinit exynos4_gic_secondary_init(void)
{
void __iomem *dist_base = S5P_VA_GIC_DIST +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
int i;
/*
@@ -216,5 +220,6 @@
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
}
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca94..62e4f43 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@
{ .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
@@ -49,6 +48,10 @@
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4210_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+};
+
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(S5P_EPLL_CON0),
SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@
};
static struct sleep_save exynos4_core_save[] = {
- /* CMU side */
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+ if (soc_is_exynos4210())
+ s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
}
static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5..fd5e7b6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
+config MACH_DEVIXP
+ bool "Omicron DEVIXP"
+ help
+ Say 'Y' here if you want your kernel to support the DEVIXP
+ board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+ bool "Omicron MICCPT"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the MICCPT
+ board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+ bool "Omicron MIC256"
+ help
+ Say 'Y' here if you want your kernel to support the MIC256
+ board from OMICRON electronics GmbH.
+
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc3..eded94c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
@@ -25,6 +26,9 @@
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
+obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1..eb945a9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2())
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV 4
+#define IRQ_LINES 4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+
+void __init miccpt_pci_preinit(void)
+{
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[IRQ_LINES] = {
+ IXP4XX_GPIO_IRQ(INTA),
+ IXP4XX_GPIO_IRQ(INTB),
+ IXP4XX_GPIO_IRQ(INTC),
+ IXP4XX_GPIO_IRQ(INTD)
+ };
+
+ if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+ return pci_irq_table[(slot + pin - 2) % 4];
+
+ return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = miccpt_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+ if (machine_is_miccpt())
+ pci_common_init(&miccpt_pci);
+ return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 0000000..3b6a81a6
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ * Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition omixp_partitions[] = {
+ {
+ .name = "Recovery Bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ }, {
+ .name = "Calibration Data",
+ .size = 0x00020000,
+ .offset = 0x00020000,
+ }, {
+ .name = "Recovery FPGA",
+ .size = 0x00020000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Release Bootloader",
+ .size = 0x00020000,
+ .offset = 0x00060000,
+ }, {
+ .name = "Release FPGA",
+ .size = 0x00020000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Kernel",
+ .size = 0x00160000,
+ .offset = 0x000a0000,
+ }, {
+ .name = "Filesystem",
+ .size = 0x00C00000,
+ .offset = 0x00200000,
+ }, {
+ .name = "Persistent Storage",
+ .size = 0x00200000,
+ .offset = 0x00E00000,
+ },
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = omixp_partitions,
+ .nr_parts = ARRAY_SIZE(omixp_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device omixp_flash_device[] = {
+ {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &omixp_flash_data[0],
+ },
+ .resource = &omixp_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "IXP4XX-Flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &omixp_flash_data[1],
+ },
+ .resource = &omixp_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ * ttyS0 .. UART2
+ * ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ /* list termination */
+ }
+};
+
+static struct platform_device omixp_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = omixp_uart_data,
+ .num_resources = 2,
+ .resource = omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+ {
+ .name = "LED-A",
+ .gpio = 7,
+ },
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+ .num_leds = ARRAY_SIZE(mic256_led_pins),
+ .leds = mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ },
+};
+
+static struct platform_device ixdp425_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_eth,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_eth + 1,
+ },
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &mic256_leds,
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &omixp_flash_device[1],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+ ixp4xx_sys_init();
+
+ /* 16MiB Boot Flash */
+ omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+ omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
+
+ /* 32 MiB Data Flash */
+ omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ if (machine_is_devixp())
+ platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+ else if (machine_is_miccpt())
+ platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+ else if (machine_is_mic256())
+ platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..ea5ec0f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -64,8 +64,25 @@
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
+config MODULE_M28
+ bool
+ select SOC_IMX28
+ select LEDS_GPIO_REGISTER
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_FEC
+ select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_OCOTP
+
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
+config MACH_M28EVK
+ bool "Support DENX M28EVK Platform"
+ select MODULE_M28
+
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index ea8dcb7..8c93b24 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index ba53227..7fa1ac4 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -738,11 +738,17 @@
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
- /* Extra fec clock setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- reg &= ~BM_CLKCTRL_ENET_SLEEP;
- reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * Extra fec clock setting
+ * The DENX M28 uses an external clock source
+ * and the clock output must not be enabled
+ */
+ if (!machine_is_m28evk()) {
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ reg &= ~BM_CLKCTRL_ENET_SLEEP;
+ reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ }
/*
* 480 MHz seems too high to be ssp clock source directly,
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 5aa5f75..0d2d2b4 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
+ machine_is_m28evk() || \
machine_is_tx28() || \
0)
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf65..6777674 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
+ case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 0000000..3b1681e
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+ /* auart0 */
+ MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+ /* auart3 */
+ MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+ /* fec1 */
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+ /* flexcan0 */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* flexcan1 */
+ MX28_PAD_GPMI_CE2N__CAN1_TX,
+ MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* mxsfb (lcdif) */
+ MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+ MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+ /* nand */
+ MX28_PAD_GPMI_D00__GPMI_D0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D01__GPMI_D1 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D02__GPMI_D2 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D03__GPMI_D3 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D04__GPMI_D4 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D05__GPMI_D5 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D06__GPMI_D6 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D07__GPMI_D7 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_ALE__GPMI_ALE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_CLE__GPMI_CLE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+ /* Backlight */
+ MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+ {
+ .name = "user-led1",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED1,
+ },
+ {
+ .name = "user-led2",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED2,
+ },
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+ .leds = m28evk_leds,
+ .num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+ {
+ /* fec0 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ }, {
+ /* fec1 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ },
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+ int i;
+ u32 val;
+ const u32 *ocotp = mxs_get_ocotp();
+
+ if (!ocotp) {
+ pr_err("%s: timeout when reading fec mac from OCOTP\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code DENX OUI (C0:E5:4E) here.
+ */
+ for (i = 0; i < 2; i++) {
+ val = ocotp[i * 4];
+ mx28_fec_pdata[i].mac[0] = 0xC0;
+ mx28_fec_pdata[i].mac[1] = 0xE5;
+ mx28_fec_pdata[i].mac[2] = 0x4E;
+ mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+ mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+ mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+ }
+
+ return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+ {
+ .name = "Ampire AM-800480R2TMQW-T01H",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30066, /* picosecond (33.26 MHz) */
+ .left_margin = 0,
+ .right_margin = 256,
+ .upper_margin = 0,
+ .lower_margin = 45,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
+ },
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+ .mode_list = m28evk_video_modes,
+ .mode_count = ARRAY_SIZE(m28evk_video_modes),
+ .default_bpp = 16,
+ .ld_intf_width = STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+ .byte_len = 16384,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+ {
+ I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
+ .platform_data = &m28evk_eeprom,
+ },
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
+static void __init m28evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+ mx28_add_duart();
+ mx28_add_auart0();
+ mx28_add_auart3();
+
+ if (!m28evk_fec_get_mac()) {
+ mx28_add_fec(0, &mx28_fec_pdata[0]);
+ mx28_add_fec(1, &mx28_fec_pdata[1]);
+ }
+
+ mx28_add_flexcan(0, NULL);
+ mx28_add_flexcan(1, NULL);
+
+ mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+ mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+ mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &m28evk_led_data);
+
+ /* I2C */
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+ ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+ .init = m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .init_machine = m28evk_init,
+ .timer = &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 8dc0576..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -44,16 +44,16 @@
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x36400000,
- .idmask = 0xfffff000,
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_clocks = s3c6400_init_clocks,
.init_uarts = s3c6400_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
- .idcode = 0x36410100,
- .idmask = 0xffffff00,
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_clocks = s3c6410_init_clocks,
.init_uarts = s3c6410_init_uarts,
@@ -141,23 +141,15 @@
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
init_consistent_dma_size(SZ_8M);
- idcode = __raw_readl(S3C_VA_SYS + 0x118);
- if (!idcode) {
- /* S3C6400 has the ID register in a different place,
- * and needs a write before it can be read. */
+ /* detect cpu id */
+ s3c64xx_init_cpu();
- __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
- idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
- }
-
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e8..1fd9c79 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
+#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
@@ -185,11 +186,8 @@
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
- unsigned int id;
struct s3c64xx_spi_info *pd;
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@
switch (cntrlr) {
case 0:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944..0e5b3e6 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
@@ -133,11 +134,7 @@
static int __init s5p64x0_dma_init(void)
{
- unsigned int id;
-
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
- if (id == 0x50000)
+ if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b0..700dac6 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@
static int __init s5p64x0_gpiolib_init(void)
{
- unsigned int chipid;
-
- chipid = __raw_readl(S5P64X0_SYS_ID);
-
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
- if ((chipid & 0xff000) == 0x50000) {
+ if (soc_is_s5p6450()) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f..494e1a8 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
@@ -67,7 +68,7 @@
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 93c793f..f0bdc5e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -117,6 +118,7 @@
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
+ &tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
@@ -140,6 +142,7 @@
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
+ { "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..2225769 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,9 @@
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
{ .gpio = TEGRA_ULPI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_PWRN, .enable = true },
+ { .gpio = TEGRA_WIFI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_LED, .enable = true },
};
void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbc9e0e..55c55ba 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
@@ -45,10 +46,22 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
+ /* serial port on JP1 */
+ .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
+ .mapbase = TEGRA_UARTA_BASE,
+ .irq = INT_UARTA,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 216000000,
+ }, {
+ /* serial port on mini-pcie */
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -65,10 +78,48 @@
},
};
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+ .name = "wifi_rfkill",
+ .reset_gpio = TEGRA_WIFI_RST,
+ .shutdown_gpio = TEGRA_WIFI_PWRN,
+ .type = RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wifi_rfkill_platform_data,
+ },
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "wifi-led",
+ .default_trigger = "rfkill0",
+ .gpio = TEGRA_WIFI_LED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
- &tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_sdhci_device1,
+ &wifi_rfkill_device,
+ &leds_gpio,
};
static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
+ { "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
+
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "usbd", "clk_m", 12000000, false },
+ { "usb2", "clk_m", 12000000, false },
+ { "usb3", "clk_m", 12000000, false },
+
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index 42ce863..8aff06e 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -19,11 +19,19 @@
#include <mach/gpio-tegra.h>
+/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+
+/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
+/* WIFI */
+#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
+
void paz00_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..74f78b7 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -49,7 +49,7 @@
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -133,7 +133,7 @@
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -167,6 +167,8 @@
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_USB1, .enable = true },
};
void __init seaboard_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9e98ac7..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <sound/wm8903.h>
+
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -62,6 +66,12 @@
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "usbd", "clk_m", 12000000, true},
+ { "usb3", "clk_m", 12000000, true},
{ NULL, NULL, 0, 0},
};
@@ -117,6 +127,22 @@
.is_8bit = 1,
};
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+ .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+ .name = "tegra-snd-wm8903",
+ .id = 0,
+ .dev = {
+ .platform_data = &seaboard_audio_pdata,
+ },
+};
+
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
@@ -124,6 +150,10 @@
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@
I2C_BOARD_INFO("adt7461", 0x4c),
};
+static struct wm8903_platform_data wm8903_pdata = {
+ .irq_active_low = 0,
+ .micdet_cfg = 0,
+ .micdet_delay = 100,
+ .gpio_base = SEABOARD_GPIO_WM8903(0),
+ .gpio_cfg = {
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ 0,
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ },
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+ I2C_BOARD_INFO("wm8903", 0x1a),
+ .platform_data = &wm8903_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+ int gpio_status;
+
+ gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO FAILED\n");
+ WARN_ON(1);
+ }
+
+ gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+ WARN_ON(1);
+ }
+ gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+ platform_device_register(&tegra_ehci1_device);
+ platform_device_register(&tegra_ehci3_device);
+
+ return 0;
+}
+
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+ i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
@@ -161,6 +235,8 @@
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+ seaboard_ehci_init();
}
static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
+ seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+ tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
seaboard_common_init();
seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index 15b6c57..4c45d4c 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -19,6 +19,9 @@
#include <mach/gpio-tegra.h>
+#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
@@ -33,10 +36,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index e3d9ec2f..1a6617b 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
@@ -46,7 +45,8 @@
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6..3c63353 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode = 0x0;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
- idcode = s3c24xx_read_idcode_v5();
+ samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
- idcode = s3c24xx_read_idcode_v4();
+ samsung_cpu_id = s3c24xx_read_idcode_v4();
}
+ s3c24xx_init_cpu();
arm_pm_restart = s3c24xx_pm_restart;
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7..7b0a28f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x56440100,
- .idmask = 0xfffff000,
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
- .idcode = 0x36450000,
- .idmask = 0xfffff000,
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
}, {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
- .idcode = 0x43110000,
- .idmask = 0xfffff000,
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
.init_clocks = s5pv210_init_clocks,
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
}, {
- .idcode = 0x43210000,
- .idmask = 0xfffe0000,
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4412,
},
};
@@ -114,13 +132,13 @@
void __init s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr)
{
- unsigned long idcode;
-
/* initialize the io descriptors we need for initialization */
iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
- idcode = __raw_readl(cpuid_addr);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ /* detect cpu id and rev. */
+ s5p_init_cpu(cpuid_addr);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab..f680a14 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
extern void exynos4_setup_clocks(void);
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
extern int exynos4_init(void);
extern void exynos4_init_irq(void);
extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index ebc142c..3e21b94 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
* published by the Free Software Foundation.
*/
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
#define PLL45XX_MDIV_MASK (0x3FF)
#define PLL45XX_PDIV_MASK (0x3F)
#define PLL45XX_SDIV_MASK (0x7)
@@ -19,8 +72,6 @@
#define PLL45XX_PDIV_SHIFT (8)
#define PLL45XX_SDIV_SHIFT (0)
-#include <asm/div64.h>
-
enum pll45xx_type_t {
pll_4500,
pll_4502,
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 11059223..09adb84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@
# Objects we always build independent of SoC choice
-obj-y += init.o
+obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 0000000..81c06d4
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+ return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+ /* nothing here yet */
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!samsung_cpu_id) {
+ /*
+ * S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read.
+ */
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+ samsung_cpu_id = __raw_readl(cpuid_addr);
+ samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741..54f370f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
#ifndef __SAMSUNG_PLAT_CPU_H
#define __SAMSUNG_PLAT_CPU_H
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID 0x32400000
+#define S3C24XX_CPU_MASK 0xFFF00000
+
+#define S3C6400_CPU_ID 0x36400000
+#define S3C6410_CPU_ID 0x36410000
+#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK 0xFFFFF000
+
+#define S5P6440_CPU_ID 0x56440000
+#define S5P6450_CPU_ID 0x36450000
+#define S5P64XX_CPU_MASK 0xFFFFF000
+
+#define S5PC100_CPU_ID 0x43100000
+#define S5PC100_CPU_MASK 0xFFFFF000
+
+#define S5PV210_CPU_ID 0x43110000
+#define S5PV210_CPU_MASK 0xFFFFF000
+
+#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
+#define EXYNOS4412_CPU_ID 0xE4412200
+#define EXYNOS4_CPU_MASK 0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+ defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx() is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx() is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440() is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450() is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100() is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210() is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210() 0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210() is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412() is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412() 0
+#endif
+
+#define EXYNOS4210_REV_0 (0x0)
+#define EXYNOS4210_REV_1_0 (0x10)
+#define EXYNOS4210_REV_1_1 (0x11)
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
@@ -55,6 +160,12 @@
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
