| .. SPDX-License-Identifier: GPL-2.0 |
| |
| ===================== |
| Chrome OS ACPI Device |
| ===================== |
| |
| Hardware functionality specific to Chrome OS is exposed through a Chrome OS ACPI device. |
| The plug and play ID of a Chrome OS ACPI device is GGL0001 and the hardware ID is |
| GOOG0016. The following ACPI objects are supported: |
| |
| .. flat-table:: Supported ACPI Objects |
| :widths: 1 2 |
| :header-rows: 1 |
| |
| * - Object |
| - Description |
| |
| * - CHSW |
| - Chrome OS switch positions |
| |
| * - HWID |
| - Chrome OS hardware ID |
| |
| * - FWID |
| - Chrome OS firmware version |
| |
| * - FRID |
| - Chrome OS read-only firmware version |
| |
| * - BINF |
| - Chrome OS boot information |
| |
| * - GPIO |
| - Chrome OS GPIO assignments |
| |
| * - VBNV |
| - Chrome OS NVRAM locations |
| |
| * - VDTA |
| - Chrome OS verified boot data |
| |
| * - FMAP |
| - Chrome OS flashmap base address |
| |
| * - MLST |
| - Chrome OS method list |
| |
| CHSW (Chrome OS switch positions) |
| ================================= |
| This control method returns the switch positions for Chrome OS specific hardware switches. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| An integer containing the switch positions as bitfields: |
| |
| .. flat-table:: |
| :widths: 1 2 |
| |
| * - 0x00000002 |
| - Recovery button was pressed when x86 firmware booted. |
| |
| * - 0x00000004 |
| - Recovery button was pressed when EC firmware booted. (required if EC EEPROM is |
| rewritable; otherwise optional) |
| |
| * - 0x00000020 |
| - Developer switch was enabled when x86 firmware booted. |
| |
| * - 0x00000200 |
| - Firmware write protection was disabled when x86 firmware booted. (required if |
| firmware write protection is controlled through x86 BIOS; otherwise optional) |
| |
| All other bits are reserved and should be set to 0. |
| |
| HWID (Chrome OS hardware ID) |
| ============================ |
| This control method returns the hardware ID for the Chromebook. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A null-terminated ASCII string containing the hardware ID from the Model-Specific Data area of |
| EEPROM. |
| |
| Note that the hardware ID can be up to 256 characters long, including the terminating null. |
| |
| FWID (Chrome OS firmware version) |
| ================================= |
| This control method returns the firmware version for the rewritable portion of the main |
| processor firmware. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A null-terminated ASCII string containing the complete firmware version for the rewritable |
| portion of the main processor firmware. |
| |
| FRID (Chrome OS read-only firmware version) |
| =========================================== |
| This control method returns the firmware version for the read-only portion of the main |
| processor firmware. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A null-terminated ASCII string containing the complete firmware version for the read-only |
| (bootstrap + recovery ) portion of the main processor firmware. |
| |
| BINF (Chrome OS boot information) |
| ================================= |
| This control method returns information about the current boot. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| |
| .. code-block:: |
| |
| Package { |
| Reserved1 |
| Reserved2 |
| Active EC Firmware |
| Active Main Firmware Type |
| Reserved5 |
| } |
| |
| .. flat-table:: |
| :widths: 1 1 2 |
| :header-rows: 1 |
| |
| * - Field |
| - Format |
| - Description |
| |
| * - Reserved1 |
| - DWORD |
| - Set to 256 (0x100). This indicates this field is no longer used. |
| |
| * - Reserved2 |
| - DWORD |
| - Set to 256 (0x100). This indicates this field is no longer used. |
| |
| * - Active EC firmware |
| - DWORD |
| - The EC firmware which was used during boot. |
| |
| - 0 - Read-only (recovery) firmware |
| - 1 - Rewritable firmware. |
| |
| Set to 0 if EC firmware is always read-only. |
| |
| * - Active Main Firmware Type |
| - DWORD |
| - The main firmware type which was used during boot. |
| |
| - 0 - Recovery |
| - 1 - Normal |
| - 2 - Developer |
| - 3 - netboot (factory installation only) |
| |
| Other values are reserved. |
| |
| * - Reserved5 |
| - DWORD |
| - Set to 256 (0x100). This indicates this field is no longer used. |
| |
| GPIO (Chrome OS GPIO assignments) |
| ================================= |
| This control method returns information about Chrome OS specific GPIO assignments for |
| Chrome OS hardware, so the kernel can directly control that hardware. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| .. code-block:: |
| |
| Package { |
| Package { |
| // First GPIO assignment |
| Signal Type //DWORD |
| Attributes //DWORD |
| Controller Offset //DWORD |
| Controller Name //ASCIIZ |
| }, |
| ... |
| Package { |
| // Last GPIO assignment |
| Signal Type //DWORD |
| Attributes //DWORD |
| Controller Offset //DWORD |
| Controller Name //ASCIIZ |
| } |
| } |
| |
| Where ASCIIZ means a null-terminated ASCII string. |
| |
| .. flat-table:: |
| :widths: 1 1 2 |
| :header-rows: 1 |
| |
| * - Field |
| - Format |
| - Description |
| |
| * - Signal Type |
| - DWORD |
| - Type of GPIO signal |
| |
| - 0x00000001 - Recovery button |
| - 0x00000002 - Developer mode switch |
| - 0x00000003 - Firmware write protection switch |
| - 0x00000100 - Debug header GPIO 0 |
| - ... |
| - 0x000001FF - Debug header GPIO 255 |
| |
| Other values are reserved. |
| |
| * - Attributes |
| - DWORD |
| - Signal attributes as bitfields: |
| |
| - 0x00000001 - Signal is active-high (for button, a GPIO value |
| of 1 means the button is pressed; for switches, a GPIO value |
| of 1 means the switch is enabled). If this bit is 0, the signal |
| is active low. Set to 0 for debug header GPIOs. |
| |
| * - Controller Offset |
| - DWORD |
| - GPIO number on the specified controller. |
| |
| * - Controller Name |
| - ASCIIZ |
| - Name of the controller for the GPIO. |
| Currently supported names: |
| "NM10" - Intel NM10 chip |
| |
| VBNV (Chrome OS NVRAM locations) |
| ================================ |
| This control method returns information about the NVRAM (CMOS) locations used to |
| communicate with the BIOS. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| .. code-block:: |
| |
| Package { |
| NV Storage Block Offset //DWORD |
| NV Storage Block Size //DWORD |
| } |
| |
| .. flat-table:: |
| :widths: 1 1 2 |
| :header-rows: 1 |
| |
| * - Field |
| - Format |
| - Description |
| |
| * - NV Storage Block Offset |
| - DWORD |
| - Offset in CMOS bank 0 of the verified boot non-volatile storage block, counting from |
| the first writable CMOS byte (that is, offset=0 is the byte following the 14 bytes of |
| clock data). |
| |
| * - NV Storage Block Size |
| - DWORD |
| - Size in bytes of the verified boot non-volatile storage block. |
| |
| FMAP (Chrome OS flashmap address) |
| ================================= |
| This control method returns the physical memory address of the start of the main processor |
| firmware flashmap. |
| |
| Arguments: |
| ---------- |
| None |
| |
| NoneResult code: |
| ---------------- |
| A DWORD containing the physical memory address of the start of the main processor firmware |
| flashmap. |
| |
| VDTA (Chrome OS verified boot data) |
| =================================== |
| This control method returns the verified boot data block shared between the firmware |
| verification step and the kernel verification step. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A buffer containing the verified boot data block. |
| |
| MECK (Management Engine Checksum) |
| ================================= |
| This control method returns the SHA-1 or SHA-256 hash that is read out of the Management |
| Engine extended registers during boot. The hash is exported via ACPI so the OS can verify that |
| the ME firmware has not changed. If Management Engine is not present, or if the firmware was |
| unable to read the extended registers, this buffer can be zero. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A buffer containing the ME hash. |
| |
| MLST (Chrome OS method list) |
| ============================ |
| This control method returns a list of the other control methods supported by the Chrome OS |
| hardware device. |
| |
| Arguments: |
| ---------- |
| None |
| |
| Result code: |
| ------------ |
| A package containing a list of null-terminated ASCII strings, one for each control method |
| supported by the Chrome OS hardware device, not including the MLST method itself. |
| For this version of the specification, the result is: |
| |
| .. code-block:: |
| |
| Package { |
| "CHSW", |
| "FWID", |
| "HWID", |
| "FRID", |
| "BINF", |
| "GPIO", |
| "VBNV", |
| "FMAP", |
| "VDTA", |
| "MECK" |
| } |
