| # @_flash.bin | bootloader |
| # @_image [_flash.bin] | image burn to nand, default is the same as bootloader |
| # @_filesystem | filesystem to burn |
| # @_kernel | kernel image |
| # @_dtb | dtb image |
| |
| # This command will be run when ROM support stream mode |
| # i.MX8QXP, i.MX8QM |
| SDPS: boot -f _flash.bin |
| |
| FB: ucmd setenv fastboot_buffer ${loadaddr} |
| FB: download -f _image |
| # Burn image to nandfit partition if needed |
| FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; |
| FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} |
| |
| FB[-t 10000]: ucmd ubi part nandrootfs |
| FB[-t 10000]: ucmd ubi create root - |
| FB: download -f _filesystem |
| FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} |
| |
| FB: download -f _kernel |
| FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} |
| |
| FB: download -f _dtb |
| FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} |
| |
| FB: reboot |
| FB: done |
